summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-19arm64: zynqmp: spl: use given boot_device instead of fetching it againJean-Francois Dagenais
The boot_device argument to spl_boot_mode was massively added without actually modifying the existing functions. This commit actually makes use of the handed value, which is the same. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: spl: fix dual SD controller supportJean-Francois Dagenais
When enabling both SDHCI controllers, spl_mmc.c would actually choose device sdhci0 even if booted from sdhci1 (boot_device). This is because spl_mmc_get_device_index(boot_device) expects BOOT_DEVICE_MMC2[_2] in order to return index 1 instead of 0. The #if defined(...) statement is copied from board/xilinx/zynqmp/zynqmp.c So the key to properly enabling both controllers as boot sources is defining both CONFIG_ZYNQ_SDHCI0 and CONFIG_ZYNQ_SDHCI1 in your board's include/configs/*.h. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: Wire SD1 level shifter mode to SPLMichal Simek
Add missing SD boot mode to SPL. zcu102-rev1.0 is supporting this boot mode. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19microblaze: Build only DTBs for selected targetMichal Simek
Adding more targets to repository requires some additional changes not simply just adding config file, defconfig and dts. This patch makes this process easier by building only particular DTB which is selected via defconfig that Makefile doesn't need to contain all dts files in the repository. Reported-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: Remove CPU_RELEASE_ADDR macroMichal Simek
CPU_RELEASE_ADDR is used only when CONFIG_ARMV8_MULTIENTRY is enabled. ZynqMP is running ATF which takes care about this that's why no need to have this macro. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-16powerpc, 5xx: remove some "5xx" remainsHeiko Schocher
we removed 5xx support. So delete some forgotten remains. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 82xx: remove some missed mpc82xx remainsHeiko Schocher
we removed 82xx support. Missed some 82xx remains, remove them now. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16arm: mach-omap2: Generate MLO file from SD boot capable targetsAndrew F. Davis
Secure boot targets that can be loaded from an SD card FAT partition need to be called "MLO" on the filesystem, make a copy with this name to clarify the correct image for SD card booting. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-16cmd: ethsw: Fix out-of-bounds errorYork Sun
The for loop in cmd_keywords_opt_check() seems to use wrong array to set boundary, reported by Coverity analysis. Signed-off-by: York Sun <york.sun@nxp.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Tom Rini <trini@konsulko.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reported-by: Coverity (CID: 163251) Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-16arm: ti: Add missing guards to headersSemen Protsenko
To prevent possible double inclusions in future. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: refactor default environmentHannes Schmelzer
For better readability and setup-handling we refactor the default environment. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: cosmetic cleanup of config-headerHannes Schmelzer
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop obsolete CONFIG_LCD_NOSTDOUT from config-headerHannes Schmelzer
This define isn't used anymore in the u-boot source tree, so we drop it from the config header. We drop it also from the 'config_whitelist.txt' Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop bootlogo featureHannes Schmelzer
the BMP logo loading has become obsolete and is not used any more. So we drop the support for it. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: fix MMC bootHannes Schmelzer
since commit 'd5abcf94c7123167725fc22ace342f0d455093c1' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brxre1 board is broken, with this commit we make our board working again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-16defconfig: arm335x_evm_usbspl: Update MUSB EthernetMichael Welling
Adds CONFIG_SPL_USB_GADGET_SUPPORT and CONFIG_SPL_USBETH_SUPPORT. Removes CONFIG_SPL_NAND_SUPPORT, CONFIG_SPL_MTD_SUPPORT, and CONFIG_SPL_YMODEM_SUPPORT to free up space to fit in RAM. Signed-off-by: Michael Welling <mwelling@ieee.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-06-16include: nand: move endif to end of fileMugunthan V N
The terminator endif of ifdef _NAND_H_ should be at the end of file as a fail safe. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-06-14Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2017-06-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2017-06-14Revert "ARM: fixed relocation using proper alignment"Tom Rini
It turns out this change was not intended to be merged and as such, revert it. This reverts commit cdde7de0364ffa505d631b342f1a2fa729e8e67d. Reported-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-12ARM: tegra: remove Whistler supportStephen Warren
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-06-12powerpc: fsl: Update maintainersYork Sun
Update maintainers for B4860QDS, P1010RDB, P1_TWR, T104xRDB. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8569mds: Update config and maintainerYork Sun
Enable DHCP command by default. Update maintainer info. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8568mds: Update board configYork Sun
Enable DHCP command by default. Move environmental variable location to before U-Boot image. Enlarge reserved mem for malloc. Update maintainer. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8536ds: Update maintainerYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8544ds: Update maintainerYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8544ds: Fix environmental variable locationYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8544ds: Enable DHCP command by defaultYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8548cds: Enable DHCP command by defaultYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8548cds: Update maintainerYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12net: phy: marvell: Fix init function for m88e1145York Sun
Commit a058052c changed the generic phy_reset() to clear all bits in BMCR. This inevitably clears the ANEG bit. m88e1145 requires any change to ANEG bit to be followed by a software reset. This seems to be different from other PHYs. Implement read-modify-write procedure for this PHY init. Signed-off-by: York Sun <york.sun@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-12powerpc: mpc8641hpcn: Enable DHCP command and DDR debugYork Sun
Enable DHCP command to make TFTP easier. Enable DDR interactive debug by default. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12driver: ddr: fsl: Fix compiling error for DDR2York Sun
Fix compiling error of "no member named 'taamin_ps'" for DDR2. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8536ds: Enable DHCP command by defaultYork Sun
Enable DHCP command to make TFTP easier. Users don't have to use static IP address. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc86xx: Update maintainer for MPC8610HPCD and MPC8641HPCNYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc85xx: Update maintainer for MPC8541CDS and MPC8555CDSYork Sun
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADSYork Sun
Drop support for these two legacy boards. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12board: ti: am335x: Fix scale_vcore for beaglebonesLokesh Vutla
commit 0650798824 ("board: am335x: Introduce scale_vcores") updated voltages of each board based on efuse. It updated beagle bone specific voltages under the condition board_is_bone(). But this is true only for BeagleBoneWhite. Due to which voltages are not configured for BBB, BBW as wrong device is being probed. So create a common function board_is_beaglebonex() which includes am335x based beagle family. Use this for updating voltages. Also remove extra if condition for selecting voltages which is done later using a switch case and match usb current limit as before the commit 0650798824. Fixes: 0650798824 ("board: am335x: Introduce scale_vcores") Reported-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-12arm: am57xx: Keep environment in eMMCSemen Protsenko
Use eMMC (instead of SD card) to store U-Boot environment. Use "reserved" partition for U-Boot environment. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lokesh Vutla <lokeshvuta@ti.com>
2017-06-12arm: dra7: Increase "bootloader" partition sizeSemen Protsenko
Increase the size of u-boot.img, so that it conforms with new DFU configuration (see commit [1]). [1] 7a53a1a8115b ARM: ti: Update layout for MMC and eMMC (env and dfu) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-12arm: am57xx: Increase "bootloader" partition sizeSemen Protsenko
Increase the size of u-boot.img, so that it conforms with new DFU configuration (see commit [1]). [1] 7a53a1a8115b ARM: ti: Update layout for MMC and eMMC (env and dfu) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-12MAINTAINERS: mpc83xx: Add new custodianmario.six@gdsys.cc
Add myself as mpc83xx custodian.
2017-06-12tools/tbot: update READMEHeiko Schocher
refer in the README to tbots webpage, and delete the README in tools/tbot, as the latest documentation for tbot is on this webpage. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12ARM: dts: keystone-k2hk-evm: Add U-boot specific dtsi fileCooper Jr., Franklin
With Davinci I2C switching to device model, K2HK requires U-boot specific device tree entries. This is only required for I2C 1 which is needed extremely early during the boot process. Fixes: 1743d040b1df ("ARM: keystone: Enable DM_I2C by default") Reported-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
2017-06-12cmd: nvedit: bring error message in sync with condition under which it appearsLothar Waßmann
The list of symbols listed in the error message for missing Kconfig symbols is out of sync with the symbols actually tested. Add the missing symbols and reorder their appearance to be in sync with the #if statement for easier checking. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
2017-06-12cmd: mtdparts: fix uninitialized variable warningLothar Waßmann
commit 06a040a31bcf ("cmd: mtdparts: fix null pointer dereference in parse_mtdparts") removed the initialization of a pointer variable, which is subsequently used in a debug() call. This produces an uninitialized variable warning, when compiling with DEBUG defined. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
2017-06-12dm: bcm6345_gpio: Set proper output level in bcm6345_gpio_direction_outputAxel Lin
Current code does not set output level in bcm6345_gpio_direction_output, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com>
2017-06-12board_f: fix calculation of reloc_offLothar Waßmann
relocate_code() calculates the relocation offset wrt. the symbol __image_copy_start which happens to have the same value as CONFIG_TEXT_BASE on most systems. When creating an i.MX boot image with an integrated IVT it is convenient to have CONFIG_TEXT_BASE point to the start of the IVT that is prepended to the actual code. Thus CONFIG_TEXT_BASE will differ from __image_copy_start, while the calculation 'gd->relocaddr - __image_copy_start' still gives the right relocation offset. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
generated by cgit v0.10.2 at 2024-07-07 01:58:46 (GMT)