summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-25mpc5xxx: Support CPU internal watchdog.Detlev Zundel
Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-24mpc512x: Add display of reset status registerDetlev Zundel
Content of the RSR is put into gd early so we can output it together with the CPU info. The clearing of gd in board_init_f is redundant for this architecture as it is done in cpu_init_f so we remove it. Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-23Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk
2010-01-23at91: Enable slow master clock on meesc boardDaniel Gorsulowski
Normally the processor clock has a divisor of 2. In some cases this this needs to be set to 4. Check the user has set environment mdiv to 4 to change the divisor. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2010-01-23SPEAr : Support added for SPEAr320 boardVipin KUMAR
SPEAr320 SoC support contains basic spear320 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver - emi driver(cfi support) Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr310 boardVipin KUMAR
SPEAr310 SoC support contains basic spear310 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver - emi driver(cfi support) Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : emi controller initialization for CFI driver supportVipin KUMAR
SPEAr310 and SPEAr320 SoCs contain an EMI controller to interface Paraller NOR flashes. This patch adds the support for this IP The standard CFI driver is used to interface with NOR flashes Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr300 boardVipin KUMAR
SPEAr300 SoC support contains basic spear300 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support for HW mac id read/write from i2c memVipin KUMAR
This patch adds the support to read and write mac id from i2c memory. For reading: if (env contains ethaddr) pick env ethaddr else pick ethaddr from i2c memory For writing: chip_config ethaddr XX:XX:XX:XX:XX:XX writes the mac id in i2c memory Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr600 boardVipin KUMAR
SPEAr600 SoC support contains basic spear600 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : usbd driver support for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain a synopsys usb device controller. USB Device IP can work in 2 modes - DMA mode - Slave mode The driver adds support only for slave mode operation of usb device IP. This driver is used along with standard USBTTY driver to obtain a tty interface over USB on the host Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : nand driver support for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain an FSMC controller which can be used to interface with a range of memories eg. NAND, SRAM, NOR. Currently, this driver supports interfacing FSMC with NAND memories Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : smi driver support for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain a serial memory interface controller. This controller is used to interface with spi based memories. This patch adds the driver for this IP. Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : i2c driver support added for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain a synopsys i2c controller. This patch adds the driver for this IP. Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Adding basic SPEAr architecture support.Vipin KUMAR
SPEAr Architecture support added. It contains the support for following SPEAr blocks - Timer - System controller - Misc registers Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Adding README.spear in docVipin KUMAR
README.spear contains information about SPEAr architecture and build options etc Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23ARM Update mach-typesTom Rix
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 2045124ffd1a5e46d157349016a2c50f19c8c91d Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2010-01-23Kirkwood: Makefile cleanup- fixed ordering (cosmetic change)Prafulla Wadaskar
As per coding guidlines, it is good to maintain proper ordering in the makefiles. This was missed during initial coding, corrected here. This was discovered during orion5x code review Thanks to Albert Aribaud for this. Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-01-23Kirkwood: Upgated licencing for files imported from linux source to GPLv2 or ↵Prafulla Wadaskar
later These are few files directly imported from Linux kernel source. Those are not modifyed at all ar per strategy. These files contains source with GPLv2 only whereas u-boot expects GPLv2 or latter These files are updated for the same from prior permission from original writes Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-01-23s5pc1xx: update cache routinesMinkyu Kang
Because of v7_flush_dcache_all is moved to omap3/cache.S and s5pc110 needs cache routines, update s5pc1xx cache routines. l2_cache_enable and l2_caceh_disable are moved from cache.c to cache.S and invalidate_dcache is modified for SoC specific. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-01-23samsung: fix DMC1_MEM_CFG for s3c64xxSeunghyeon Rhee
The MSB of DMC1_MEM_CFG can be set to '1' for separate CKE control for S3C6400. In the configuration of SMDK6400, however, two 16-bit mDDR (SAMSUNG K4X51163) chips are used in parallel to form 32-bit memory bus and there is no need to control CKE for each chip separately. AFAIK, CKE1 is not at all connected. Only CKE0 is used. Futhermore, it should be '0' always for S3C6410. When tested with a board which has a S3C6410 and the same memory configuration, a side effect is observed that u-boot command "reset" doesn't work leading to system hang. Leaving the bit clear is safe in most cases. Signed-off-by: Seunghyeon Rhee <seunghyeon@lpmtec.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-01-23ppc4xx: Kilauea: Add CPLD version detection and EBC reconfigurationStefan Roese
A newer CPLD version on the 405EX evaluation board requires a different EBC controller setup for the CPLD register access. This patch adds a CPLD version detection for Kilauea and code to reconfigure the EBC controller (chip select 2) for the old CPLD if no new version is found. Additionally the CPLD version is printed upon bootup: Board: Kilauea - AMCC PPC405EX Evaluation Board (CPLD rev. 0) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Cc: Zhang Bao Quan <bqzhang@udtech.com.cn>
2010-01-23ppc4xx: Fix sending type 1 PCI transactionsFelix Radensky
The list of 4xx SoCs that should send type 1 PCI transactions is not defined correctly. As a result PCI-PCI bridges and devices behind them are not identified. The following 4xx variants should send type 1 transactions: 440GX, 440GP, 440SP, 440SPE, 460EX and 460GT. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>
2010-01-21mpc512x: Use in/out accessors for all registersDetlev Zundel
This is not only a cosmetic change as it fixes the real bug of board reset not working with the ELDK 4.2 toolchain. Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-21tools: allow people to compile w/out configuringMike Frysinger
It's useful to be able to build up the host tools without having to select a board first. Pretty much all tools in there are config-independent anyways. Also add a shortcut "tools-all" to quickly build all host tools that are actually config-independent to allow for simple test builds. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21ubsha1: drop unnecessary includes/prototypesMike Frysinger
This code doesn't use any config.h defines, and the sha1.h header already declares a sha1_csum prototype. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21image.h: avoid command.h for host toolsMike Frysinger
The u-boot command structures don't get used with host systems, so don't bother including it when building host code. This avoids an implicit need on config.h in the process. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21Removing Atmel from ARM926EJ-S SystemsMatthias Weisser
Signed-off-by: Matthias Weisser <weisserm@arcor.de>
2010-01-21Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2010-01-21Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-01-21lmb: only force on arches that use itMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21sha1: add dedicated config optionMike Frysinger
The sha1 code is currently compiled for everyone, but in reality, it's only used by the FIT code. So make it optional just like MD5. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-21Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk
2010-01-21Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2010-01-21Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk
2010-01-21ppc4xx: Allow setting a single SPD EEPROM address for DDR2 DIMMsFelix Radensky
On platforms where SPD EEPROM and another EEPROM have adjacent I2C addresses SPD_EEPROM_ADDRESS should be defined as a single element array, otherwise DDR2 setup code would fail with the following error: ERROR: Unknown DIMM detected in slot 1 However, fixing SPD_EEPROM_ADDRESS would result in another error: ERROR: DIMM's DDR1 and DDR2 type can not be mixed. This happens because initdram() routine does not explicitly initialize dimm_populated array. This patch fixes the problem. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>
2010-01-21ppc4xx: Fix reporting of bootstrap options G and F on 460EX/GTFelix Radensky
Bootstrap options G and F are reported incorrectly (G instead of F and vice versa). This patch fixes this. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>
2010-01-20MIPS: qemu_mips: Import asm/unaligned.h from the Linux kernelShinya Kuribayashi
with a few adjustments for U-Boot. This fixes the following build error: make -C lib_generic/ zlib.c:31:27: error: asm/unaligned.h: No such file or directory zlib.c: In function 'inflate_fast': zlib.c:641: warning: implicit declaration of function 'get_unaligned' make[1]: *** [zlib.o] Error 1 make[1]: Leaving directory `/home/skuribay/git/u-boot.git/lib_generic' make: *** [lib_generic/libgeneric.a] Error 2 Reported-by: Himanshu Chauhan <himanshu@symmetricore.com> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
2010-01-19MX31: Activate NAND environment on i.MX31 PDK board.Magnus Lilja
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-19MXC: Add large page oob layout for i.MX31 NAND controller.Magnus Lilja
Import the large page oob layout from Linux mxc_nand.c driver. The CONFIG_SYS_NAND_LARGEPAGE option is used to activate the large page oob layout. Run time detection is not supported as this moment. This has been tested on the i.MX31 PDK board with a large page NAND device. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-19mxc_nand: Update driver to work with i.MX31.Magnus Lilja
Tested on i.MX31 Litekit. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-19MX31: Add struct definition for clock control module in i.MX31.Magnus Lilja
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2010-01-19microblaze: zlib needs asm/unaligned.hMichal Simek
Microblaze has own hw unaligned handler if is available. Use big endian version. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-19microblaze: Remove getenv_IPaddr prototypeMichal Simek
Commit 6a45e384955262882375a2785426dc65aeb636c4 should remove reference from Microblaze too. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-01-18MAINTAINERS: fix nhk8815 board nameAlessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@unipv.it>
2010-01-18Fix breakage in SMC EEPROM standalone applicationsBen Warren
Commit 6a45e384955262882375a2785426dc65aeb636c4 (Make getenv_IPaddr() global) inadvertently added ' #include "net.h" ' to the standalone programs, creating duplicate definitions of 'struct eth_device'. This patch removes the local definitions and removes other code that breaks due to the change in definition. Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-01-18Makefile: fix parallel buildDaniel Hobi
During parallel build, the top Makefile spawns multiple sub-makes for targets in cpu/$(CPU) and $(dir $(LDSCRIPT)). If the .depend files are not present in these directories, the sub-makes may end up generating these files simultaneously which leads to corrupted content. A typical error message is: .depend:39: *** multiple target patterns. Stop. This patch serializes the creation of .depend in cpu/$(CPU) and $(dir $(LDSCRIPT)) by adding these directories to the depend target in the top Makefile. Other directories in $(LIBS) are not affected since they contain only one Make target and thus only one sub-make is spawned per directory. Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-18Blackfin: add support for kgdbRobin Getz
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-18asm-generic/signal.h: import from linuxRobin Getz
We need signal.h for Blackfin/KGDB, so import the asm-generic/signal.h for people to leverage. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17CRAMFS: support cramfs in RAMHeiko Schocher
cramfsls and cramfsload are added to the command list. A cramfs placed at 'cramfs_addr' can the be listed with 'cramfsls' and files can be loaded with 'cramfsload'. 'cramfs_addr' is an environment variable specifying the address the cramfs is located. This works for powerpc and for ARM. Use CONFIG_CMD_CRAMFS. Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Heiko Schocher <hs@denx.de>
generated by cgit v0.10.2 at 2024-07-05 05:40:00 (GMT)