summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-29spi: ti_qspi: dra7xx: Add support to use 76.8MHz clockVignesh R
According to AM572x DM SPRS953A, QSPI bus speed can be 76.8MHz, update the driver to use the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-07-29ARM: dra7xx: Change DPLL_PER_HS13 divider valueLokesh Vutla
According to AM572x DM SPRS953A, QSPI bus speed can be 76.8MHz, hence update QSPI input clock divider value (DPLL_PER_HS13) to provide 76.8MHz clock, so that driver can use the same. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-29sf: sf_params: Add AT25DF321 flash supportWenyou Yang
Add AT25DF321 flash support. Fix AT25DF321A device name. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-29spi: ti_qspi: Remove delay in read path for dra7xxVignesh R
As per commit b545a98f5dc563 ("spi: ti_qspi: Add delay for successful bulk erase) says its added to meet bulk erase timing constraints. But bulk erase is a cmd to flash and delay in read path does not make sense. Morever, testing on DRA74/DRA72 evm has shown that this delay is no longer required. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-07-29spi: ti_qspi: Fix compiler warning when DEBUG macro is setVignesh R
clk_div is uninitialized at the beginning of ti_spi_set_speed(), move debug() print after clk_div calculation to avoid compiler warning and to have proper value of clk_div printed during debugging. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-07-29spi: ti_qspi: Fix failure on multiple READ_ID cmdVignesh R
Populating QSPI_RD_SNGL bit(0x1) in priv->cmd means that value QSPI_INVAL (0x4) is not written to CMD field of QSPI_SPI_CMD_REG in ti_qspi_cs_deactivate(). Therefore CS is never deactivated between successive READ ID which results in sf probe to fail. Fix this by not populating priv->cmd with QSPI_RD_SNGL and OR it wih priv->cmd as required (similar to the convention followed in the driver). Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-07-29spi: Add support for N25Q016AMoritz Fischer
This commit adds support in the spi-nor driver for the N25Q016A, a 16Mbit SPI NOR flash from Micron. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-28Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-07-28MAINTAINERS: i.MX: Add board/freescale/*mx* pathFabio Estevam
Pass the board/freescale/*mx*/ path as files maintained by Stefano Babic. While this is not ideal and does not cover all the i.MX board cases, it gives at least a better hint for the /scripts/get_maintainer.pl tool. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfigFabio Estevam
Add an entry for the mx7dsabresd_secure_defconfig target. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28mx7_common: initialize generic timer on all CPU'sStefan Agner
Use CONFIG_TIMER_CLK_FREQ to let the non-secure init code initialize the generic timer on all CPU's. This allows to make use of the timer freuquency register also on other CPU than the start CPU which is important for KVM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-28mx6ul_14x14_evk: Remove unused defineDiego Dorta
Remove unused define constant. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZEFabio Estevam
cgtqmx6eval uses the imx_ddr_size() function to calculate the DDR size in runtime, so there is no need to define PHYS_SDRAM_SIZE. Remove the unneeded definition. Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2016-07-28novena: Remove uneeded PHYS_SDRAM_SIZEFabio Estevam
novena uses the imx_ddr_size() function to calculate the DDR size in runtime, so there is no need to define PHYS_SDRAM_SIZE. Remove the unneeded definition. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Marek Vasut <marex@denx.de>
2016-07-28bx50v3: Use imx_ddr_size() for calculating the DDR sizeFabio Estevam
imx_ddr_size() can be used to calculate the DDR size in runtime. By using this function we no longer need to define PHYS_SDRAM_SIZE. Cc: Martin Donnelly <martin.donnelly@ge.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28aristainetos: Use imx_ddr_size() for calculating the DDR sizeFabio Estevam
imx_ddr_size() can be used to calculate the DDR size in runtime. By using this function we no longer need to define PHYS_SDRAM_SIZE. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Heiko Schocher <hs@denx.de>
2016-07-28warp: Use imx_ddr_size() for calculating the DDR sizeFabio Estevam
imx_ddr_size() can be used to calculate the DDR size in runtime. By using this function we no longer need to define PHYS_SDRAM_SIZE. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28warp7: Move some USB configuration options to defconfigBreno Lima
Currently it's recommended to move some configuration options to the defconfig file. Move some USB related options to the defconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com>
2016-07-28colibri_imx7: add Colibri iMX7S/iMX7D module supportStefan Agner
This commit adds support for the Toradex Computer on Modules Colibri iMX7S/iMX7D. The two modules/SoC's are very similar hence can be easily supported by one board. The board code detects RAM size at runtime which is one of the differences between the two boards. The board also uses the UART's in DTE mode, hence making use of the new DTE support via serial DM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-28cgtqmx6eval: Replace is_mx6q() for macroBreno Lima
It's not necessary to implement the is_mx6q function, there is a macro in sys_proto.h already implemented. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28mx6cuboxi: Replace is_mx6q() for macroBreno Lima
It's not necessary to implement the is_mx6q function, there is a macro in sys_proto.h already implemented. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28wandboard: Replace is_cpu_type() for macroBreno Lima
It's not necessary to use the is_cpu_type function, there is a macro in sys_proto.h already implemented. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28imx: ventana: add dt fixup for watchdog external resetTim Harvey
Added removal of the fsl,ext-reset-output property in the wdog node for board revisions that pre-date the addition of the external watchdog reset signal. This property is a recent addition to mainline linux kernel in order to specify that the IMX watchdog external reset should be used instead of the internal chip-level reset. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: refactor board-specific dt fixups (no functional change)Tim Harvey
Re-factor the board-specific dt fixups so that they are easier to follow and extend in the future: - use defines for DT paths - use switch/case per board - order models numerically There is no functional change in the code Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: make hwconfig initialize based on board configurationTim Harvey
The hwconfig env var allows user to control hardware specific configuration of board specific features but not all Ventana boards have the same features. We will use the magic default value of "_UNKNOWN_" to signify that the bootloader should create this based on detected board model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: add extra DIO's for GW5520Tim Harvey
The GW5520 has 10 DIO's instead of the typical 4 found on the Ventana product family. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: make number of digital I/O's dynamicTim Harvey
Replace the static list of board-specific digital I/O's with a dynamic list. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: make RS232 enable board specificTim Harvey
Not all Ventana boards have an RS232 transceiver, make it board specific. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: re-enable late board info displayTim Harvey
3b1f681131149b5f62602f582a7e60b0185a2a49 caused a regression that removes board info dispaly for Gateworks Ventana boards because it made the invalid assumption that CONFIG_DISPLAY_BOARDINFO_LATE was the same thing as CONFIG_DISPLAY_BOARDINFO. Ventana needs to call show_board_info in late init because we need to have the i2c eeprom based model info. Re-define CONFIG_DISPLAY_BOARDINFO_LATE to allow that to happen. Cc: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: default pci to disabledTim Harvey
The IMX6 PCIe host controller does not have a proper reset and as such there are several issues that can arise if PCI is enabled in the bootloader follwed by Linux trying to re-configure LTSSM and/or toggling PERST# to the devices. For now, the best approach seems to default to disabling PCI by defaulting pciedisable=1. This can be overridden by the user if they need PCI in the bootloader, for example: - GW552x needing ethernet access in bootloader - GW16082 expansion board needing a device-tree fixup for irq mapping Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28pci: allow disabling of pci init/enum via envTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: add dt fixup for eth1 mac-addressTim Harvey
Ventana boards with a PCI Marvell Sky2 GigE MAC require the MAC address to be placed in a DT node in order for the mainline linux driver to obtain it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: add dt fixup for GW16082 irq mappingTim Harvey
The GW16082 mini-PCI expansion mezzanine uses a TI XIO2001 PCIe-to-PCI bridge with legacy INTA/B/C/D interrupts. These interrupts are assigned in the reverse order according to the PCI spec. If the TI bridge is found on the Ventana PCI bus, add device-tree nodes according to bus enumeration explicitly defining the interrupt mapping to override the default PCI mapping in the Linux kernel. This allows the GW16082 to work with upstream kernels that support device-tree irq parsing. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULTFabio Estevam
There is no need for introducing MX7_SEC, as there is the CONFIG_ARMV7_BOOT_SEC_DEFAULT option for this purpose. Switch to CONFIG_ARMV7_BOOT_SEC_DEFAULT and get rid of MX7_SEC. Tested by booting a 4.1.15 NXP kernel with mx7dsabresd_secure_defconfig target. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-28pico-imx6ul: drop warning due to redefinedStefano Babic
USB gadget configuration is set in defconfig and must be removed from pico-imx6ul.h. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28mx6: wandboard: fix warning due to missing prototypeStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28Fix build for mx7dsabresd (secure config)Stefano Babic
After moving CONFIG_USB_EHCI_MX7 to Kconfig, the flag must be set in defconfig for mx7dsabresd. It is already for the not secure config, it is missing in the secure configuration. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-07-28Merge git://git.denx.de/u-boot-dmTom Rini
2016-07-28mmc: dw_mmc: reduce timeout detection cycleXu Ziyuan
It's no need to speed 10 seconds to wait the mmc device out from busy status. 500 milliseconds enough. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-07-27Add a power domain framework/uclassStephen Warren
Many SoCs allow power to be applied to or removed from portions of the SoC (power domains). This may be used to save power. This API provides the means to control such power management hardware. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: spl: mmc: Support raw partitions with CONFIG_BLKSimon Glass
Fix up the call in mmc_load_image_raw_partition() to use the correct function to obtain the MMC device, so that this code can support driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: usb: Use blk_dread/write() instead of direct callsSimon Glass
Update the USB mass storage code to allow it to work with driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: socfpga: mmc: Support CONFIG_BLKSimon Glass
Update the driver to support using driver model for block devices. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: mmc: zynq: Convert zynq to use driver model for MMCSimon Glass
Move zynq to the latest driver model support by enabling CONFIG_DM_MMC, CONFIG_DM_MMC_OPS and CONFIG_BLK. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: zynq: usb: Convert to CONFIG_DM_USBSimon Glass
Convert zynq USB to driver model. Note this is tested on zynq-zybo only. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27zynq: Increase the early malloc() sizeSimon Glass
This is needed to support driver-model conversion of USB and block devices. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27net: phy: marvell: Add a missing errno.h headerSimon Glass
This corrects a build error on zynqmp. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27arm: Show early-malloc() usage in bdinfoSimon Glass
This is useful information to show how close we are to the limit. At present it is only available by enabling DEBUG in board_r.c. Make it available with the 'bdinfo' command also. Note that this affects ARM only. The bdinfo command is different for each architecture. Rather than duplicating the code it would be better to refactor it (as was done with global_data). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: Use dm_scan_fdt_dev() directly where possibleSimon Glass
Quite a few places have a bind() method which just calls dm_scan_fdt_dev(). We may as well call dm_scan_fdt_dev() directly. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev()Simon Glass
This new function is more convenient for callers, and handles pre-relocation situations automatically. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v0.10.2 at 2024-08-14 15:39:20 (GMT)