summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-08dm: freescale: Drop mxs_auart serial driverSimon Glass
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-08OMAP3_LOGIC: Setup defconfig to enable SPL and NAND bootingAdam Ford
The defconfig patch will enable the the SPL and NAND settings. The update to Kconfig will allow the SPL to configured in and built. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08OMAP3: Enable SPL on omap3_logicAdam Ford
Previously, Omap3_logic assumed X-loader was present. With this patch, we can finally replace X-loader with an MLO generated by U-Boot. This requires ECC to be setup to match the Linux Kernel and the PBIAS confgured for the SD card. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08rpi: fix up Model B entriesLubomir Rintel
The P5 header was not present on "Model B" any board prior to Revision 2.0, there's no need for a separate device tree. Also, it looks like "rev2" is incorrectly used to only cover the 512MiB memory models; there also were 256MiB 2.0 boards. I don't have all of the boards to check this, I'm following this table: http://elinux.org/RPi_HardwareHistory#Board_Revision_History Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2016-02-08rpi: link to another model number info sourceStephen Warren
This source has been blessed by Dom Cobley at the RPi Foundation, so seems like the best source to refer to. It's a superset of and consistent with the other sources. Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-02-08hush: Add rudimentary support for PS1 and PS2Marek Vasut
Add trivial support for changing the U-Boot command prompt string by setting PS1 and PS2 environment variables. Only static variables are supported. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08hush: Pull out U-Boot prompt display and read functionalityMarek Vasut
Pull the code which displays U-Boot prompt and reads the command line into a separate function. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08serial: serial_stm32: move clock config from driver to boardVikas Manocha
This patch removes the uart clock enable from serial driver & move it in the board code. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08test, tools: introduce tbot READMEHeiko Schocher
introduce a README how to use tbot for testing U-Boot and/or linux kernels. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-02-08ARM: omap3_logic: Fix pin muxingAdam Ford
Enhance pin muxing to enable more board features and reduce power based on Tony's device tree work. Signed-off-by: Adam Ford <aford173@gmail.com>
2016-02-08tools: env: update usage stringsAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: factor out parse_common_argsAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: shift optind arguments and fix argument indicesAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: parse aes key / suppress flag into argument structAndreas Fenkart
disabled original parsing, but not yet removed since the argument indexing needs to be fixed Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: introduce setenv/printenv argument structsAndreas Fenkart
goal is to use getopt for all argument parsing instead of adhoc parsing in fw_getenv/fw_setenv functions Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: make parse_aes_key statelessAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env validate: pass values as 0-based arrayAndreas Fenkart
passing argv/argc can produce off-by-one errors Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini
2016-02-08Merge branch 'master' of git://git.denx.de/u-boot-niosTom Rini
2016-02-06net: davinci_emac: fix NULL check after pointer dereferenceVishwas Srivastava
NULL check is made after the pointer dereference. This patch fixes this issue. Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com> CC: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-02-06ppc: xilinx-ppc405-genericRicardo Ribalda
Fix device tree name: +(xilinx-ppc405-generic) Device Tree Source is not correctly specified. +(xilinx-ppc405-generic) Please define 'CONFIG_DEFAULT_DEVICE_TREE' +(xilinx-ppc405-generic) or build with 'DEVICE_TREE=<device_tree>' argument +(xilinx-ppc405-generic) make[2]: *** [arch/powerpc/dts/xilinx-ppc440-generic.dtb] Error 1 +(xilinx-ppc405-generic) make[1]: *** [dts] Error 2 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06net: fix wrong initialization in davinci-emac driverVishwas Srivastava
emac module of the davinci platform supports only 8 tx and 8 rx channels (total 16). emac driver for davinci platform, however, while doing initialization of the dma descriptor head pointers, wrongly initializes the 16 head pointers (instead of 8) for tx dma and 16 head pointers (insted of 8) for rx dma, which is wrong. The result is, that this register initilization spills over the other registers which was not intended and is undesirable. This patch fixes this problem. Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com> CC: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-02-06fdt: introduce fdtdec_get_child_countPeng Fan
Introduce fdtdec_get_child_count for get the number of subnodes of one parent node. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2016-02-06rockchip: Drop old CONFIG_VIDEO_ROTATION optionSimon Glass
The option was renamed to CONFIG_CONSOLE_ROTATION and Rockchip boards were not updated. However this option is is not needed by default for Rockchip since we don't need a rotated console for current boards. So just remove the old option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06bzlib: Try another way to fix an unused variableSimon Glass
Use __maybe_unused which should avoid the Coverity error. Reported-by: Coverity (CID: 134900) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06video: test: Adjust order of file closureSimon Glass
Close the file earlier to hopefully fix a Coverity error. Reported-by: Coverity (CID: 134901) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06video: Use 'int' for loop variables instead of shortSimon Glass
Using short doesn't save anything and is confusing when the width and height variables are ulong. This may fix Coverity CID134902 but I doubt it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06cmd: Fix control bmp_display()Simon Glass
All paths should share the same return. Reported-by: Coverity (CID:134903) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06microblaze: Correct build error in eth-uclass.cSimon Glass
This fixes the following error when building microblaze-generic: net/eth-uclass.c: In function 'eth_post_probe': net/eth-uclass.c:466:18: error: 'gd' undeclared (first use in this function) ops->start += gd->reloc_off; Fixes: db9391e1 ("net: Move driver-model code into its own file") Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-06Use correct spelling of "U-Boot"Bin Meng
Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06nios2: set up the debug UART earlyThomas Chou
Set up the debug UART early if enabled, so that it is ready to use. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Chin Liang See <clsee@altera.com>
2016-02-05x86: Drop pci_type1.c and DEFINE_PCI_DEVICE_TABLEBin Meng
Now that we have converted all x86 codes to DM PCI, drop pci_type1.c which is only built for legacy PCI. Also per checkpatch.pl warning, DEFINE_PCI_DEVICE_TABLE is now deprecated so drop that too. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: Disable DM_PCI_COMPATBin Meng
Now that all x86 codes have been converted to use proper DM PCI APIs, it's time to disable the legacy compatible layer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-05dm: pci: Add missing forward declarationsBin Meng
When CONFIG_DM_PCI_COMPAT is not on, there is only a forward declaration for pci_write_config32(). Add other missing ones. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: chromebox_panther: Convert to use driver model ethernetBin Meng
This board uses RTL8169 which is a driver model ethernet driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: chromebox_panther: Drop the cache line size hackBin Meng
Now that the RTL8169 driver warning is fixed we can drop this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05efi: app: Disable CONFIG_USB_EHCI_PCIBin Meng
It does not build if without CONFIG_DM_PCI_COMPAT. For now we just disable it, until some day we add USB support to EFI application. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05efi: app: Clean up defconfigBin Meng
Move some #undef from efi-x86.h to efi-x86_defconfig as these are already Kconfig options. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: quark: Use Quark's own PCI config APIsBin Meng
There are still two places in Quark's MRC codes that use the generic legacy PCI APIs, but as we are phasing out these legacy APIs, switch to use Quark's own PCI config routines. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05net: e1000: Convert to use DM PCI APIBin Meng
Update this driver to use proper DM PCI APIs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05net: designware: Use dm_pci_mem_to_phys() in the probe routineBin Meng
Convert to use native DM PCI API dm_pci_mem_to_phys(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05net: pch_gbe: Convert to use DM PCI APIBin Meng
Use native DM PCI APIs instead of legacy compatible ones. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: pci: Drop legacy PCI APIsBin Meng
Now that we have converted all x86 codes to use DM PCI APIs, drop those legacy ones. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: pci: Use DM PCI APIs in pci_assign_irqs()Bin Meng
Drop legacy PCI APIs usage in pci_assign_irqs() as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: qemu: Convert to use DM PCI APIBin Meng
Use pci_[read|write]_config intead of x86_pci_[read|write]_config. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: tnc: Remove IGD and SDVO devices from driver modelBin Meng
With recent DM PCI changes to vesa_fb driver, external graphics card does not work any more. This is because: after setting the function disable bit, IGD and SDVO devices will disappear in the PCI configuration space. This however creates an inconsistent state from a driver model PCI controller point of view, as these two PCI devices are still attached to its parent's child device list as maintained by the driver model. Some driver model PCI APIs like dm_pci_find_class() used in the vesa_fb driver, are referring to the list to speed up the finding process instead of re-enumerating the whole PCI bus, so it gets the stale cached data which is wrong. To fix this, manually remove these two devices. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: tnc: Use DM PCI API in disable_igd()Bin Meng
Once we get udevice of IGD and SDVO, we can use its udevice to access PCI configuration space with dm_pci_write_config32(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: tnc: Change disable_igd() to have a return valueBin Meng
So far disable_igd() does not have any return value, but we may need that in the future. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: irq: Convert to use DM PCI APIBin Meng
Now that we have irq router's udevice passed as a parameter, it's time to start using the DM PCI API instead of those legacy ones. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: irq: Move irq_router to a per driver privBin Meng
At present irq_router is declared as a static struct irq_router in arch/x86/cpu/irq.c. Since it's a driver control block, it makes sense to move it to a per driver priv. Adjust existing APIs to accept an additional parameter of irq_router's udevice. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
generated by cgit v0.10.2 at 2024-07-18 13:23:09 (GMT)