summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-21env: Allow env_attr_walk to pass a priv * to callbackJoe Hershberger
In some cases it can be helpful to have context in the callback about the calling situation. This is needed for following patches. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21env: Simplify the reverse_strstr() interfaceJoe Hershberger
The logic to find the whole matching name was split needlessly between the reverse_strstr function and its caller. Fully contain it to make the interface for calling it more consistent. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21env: Fix return values in env_attr_lookup()Joe Hershberger
This function returned numbers for error codes. Change them to error codes. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21sandbox: Enable some ENV commandsJoe Hershberger
Enable some additional ENV commands in sandbox to aid in build testing and run testing. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21sandbox: Use defconfig to enable featuresJoe Hershberger
Stop using the sandbox arch Kconfig to override defaults for config options. This is a bit of abuse and may be causing build problems. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21sandbox: Cleanup order and extra defines in defconfigJoe Hershberger
The defconfigs should not be edited directly. They should be generated by editing the .config (through menuconfig or whatever) and then run make savedefconfig to have the Kconfig system generate a clean defconfig I did this for sandbox here with no actual changes. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-20Merge git://git.denx.de/u-boot-netTom Rini
2015-05-20README.scrapyard: add entries for dead board, T4240EMU and sc3Masahiro Yamada
Follow-up commit 7fc63cca611b (mpc85xx/T4240EMU: Remove T4240EMU board), and commit 27e721564591 (ppc4xx: Remove sc3 board), filling the blank fields. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-20net: Remove all calls to net_random_ethaddr()Joe Hershberger
Remove the calls to net_random_ethaddr() that some boards and some drivers are calling. This is now implemented inside of net/eth.c Enable the feature for all boards that previously enabled it. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-By: Michael Walle <michael@walle.cc> (for the lsxl board part) Series-changes: 2 -Fixed bfin build errors
2015-05-19net: Remove all references to CONFIG_ETHADDR and friendsJoe Hershberger
We really don't want boards defining fixed MAC addresses in their config so we just remove the option to set it in a fixed way. If you must have a MAC address that was not provisioned, then use the random MAC address functionality. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-19net: Implement random ethaddr fallback in eth.cJoe Hershberger
Implement the random ethaddr fallback in eth.c so it is in a common place and not reimplemented in each board or driver that wants this behavior. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-19net: phy: Add support for all targets which requires MANUAL_RELOCMichal Simek
Targets with CONFIG_NEEDS_MANUAL_RELOC do not use REL/RELA relocation (mostly only GOT) where functions aray are not updated. This patch is fixing function pointers passed to phy_register function. This patch was tested on Microblaze architecture. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-19net/phy: refactor RTL8211F initializationShengzhou Liu
RTL8211F needs to enalbe TXDLY for RGMII during phy initialization, so move it to rtl8211f_config for early initialization. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-19net: Update hardware MAC address if it changes in envJoe Hershberger
When the ethaddr changes in the env, the hardware should also be updated so that MAC filtering will work properly without resetting U-Boot. Also remove the manual calls to set the hwaddr that was included in a few drivers as a result of the framework not doing it. Reported-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-05-19net/phy: Add support for realtek RTL8211FShengzhou Liu
RTL8211F has different registers from RTL8211E. This patch adds support for RTL8211F PHY which can be found on Freescale's T1023 RDB board. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-19sunxi: Cache line size definitionPaul Kocialkowski
Sunxi platforms use ARM Cortex A8, A7 and A15 (unsupported yet) CPU cores, which all have 64 bytes cache line size. This is required to e.g. enable USB gadget. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-19sunxi: VBUS detection function fixup in g_dnl_board_usb_cable_connectedPaul Kocialkowski
sunxi_usbc_vbus_detect was renamed to sunxi_usb_phy_vbus_detect but g_dnl_board_usb_cable_connected was still using the old name, breaking the build when USB gadget is enabled. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-19sunxi: Add ga10h v1.1 defconfigHans de Goede
The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand, sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot. This commit adds a defconfig for the v1.1 pcb with an a33 soc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-19sunxi: video: Fix lvds panel support for sun6i+Hans de Goede
We've never tested the lvds panel support on sun6i+ SoCs until now, and unsurprisingly the lvds code needed some fixes to work on my ga10h A33 tablet with lvds panel. This makes the panel on that tablet actually work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-19sunxi: Make DRAM_ODT_EN Kconfig setting a boolHans de Goede
Make DRAM_ODT_EN Kconfig setting a bool, add a separate DRAM_ODT_CORRECTION setting for A23 SoCs and use DRAM_ODT_EN Kconfig everywhere instead of only in dram_sun4i.c and hardcoding odt_en elsewhere. Note this commit makes no functional changes for existing boards, its purpose is to allow changing the odt_en value on future A33 boards. For sun4i/sun5i/sun7i boards which set DRAM_ODT_EN=y (which no defconfigs currently do) this patch turns on odt for both the DQ and the DQS lines, whereas previously it was possibly (but not desirable) to turn odt on only for one of them by setting the in DRAM_ODT_EN option to 1 or 2 instead of 3. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
2015-05-19sunxi: Fix dram initialization not working on some a33 devicesHans de Goede
When porting the allwinner dram init code to u-boot we missed some code setting an extra bit when doing auto dram config. This commits add this bit, fixing dram init not working on the ga10h 10" a33 tablet which I'm bringing up atm. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-19sunxi: add support for UART2 on A23/A33Laurent Itti
Add support for UART2 (2-pin version but note that RTS/CTS pins are available pn that port for possible future use), can be selected in config by using CONFIG_CONS_INDEX=3 Signed-off-by: Laurent Itti <laurentitti@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-19console: Fix pre-console flushing via cfb_console being very slowHans de Goede
On my A10 OlinuxIno Lime I noticed a huge (5+ seconds) delay coming from console_init_r. This turns out to be caused by the preconsole buffer flushing to the cfb_console. The Lime only has a 16 bit memory bus and that is already heavy used to scan out the 1920x1080 framebuffer. The problem is that print_pre_console_buffer() was printing the buffer once character at a time and the cfb_console code then ends up doing a cache-flush for touched display lines for each character. This commit fixes this by first building a 0 terminated buffer and then printing it in one puts() call, avoiding unnecessary cache flushes. This changes the time for the flush from 5+ seconds to not noticable. The downside of this approach is that the pre-console buffer needs to fit on the stack, this is not that much to ask since we are talking about plain text here. This commit also adjusts the sunxi CONFIG_PRE_CON_BUF_SZ to actually fit on the stack. Sunxi currently is the only user of the pre-console code so no other boards need to be adjusted. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-05-19sunxi: Set SYS_MALLOC_CLEAR_ON_INIT to nHans de Goede
We don't need this on sunxi, as we always use calloc or memset when initialised memory is required. Clearing this shaves some time of our boot time. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-05-19sunxi: Pass serial number through ATAGPaul Kocialkowski
Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-18Merge git://git.denx.de/u-boot-samsungTom Rini
2015-05-18exynos: clock: clean up checkpatch issuesMinkyu Kang
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-05-18arc: gitignore: ignore ARC DTBsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-16MAINTAINERS, git-mailrc: Update Jagan's name and e-mailJagan Teki
Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-05-15imx: ventana: use stack relocationTim Harvey
Certain features we desire require a larger stack than is available by using iRAM (most notably for us, env_mmc). Relocate the stack to DRAM so that we can use these features. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-15imx: ventana: add GSC boot watchdog disable to SPLTim Harvey
If the SPL is to be used for Falcon mode then we need to make sure the SPL disable the GSC boot watchdog. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: add gpio setup to SPLTim Harvey
If the SPL is to be used for Falcon mode then we need to make sure it configures basic GPIO (iomux, padconf, and default output levels). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: use common uart and i2c setup functions in SPLTim Harvey
Now that uart and i2c setup functions have been moved to common.c we can use these and remove code duplication. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: detect pmic using i2c probe instead of board modelTim Harvey
Avoid requiring board-model and probe pmic by its i2c address. This is in preparation for being able to call pmic_setup() from SPL and not need board type. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: move GSC boot watchdog disable function to gsc.cTim Harvey
Move the code that disables the GSC boot watchdog into gsc.c Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: split out common functions between SPL and ubootTim Harvey
Move shared functions used by both SPL and U-Boot to common.c: - setup_iomux_uart() and uart pad config - gpio pad config In the process also moved the following to common.c in preparation for calling it from the SPL: - split i2c setup into a shared function - move pmic init to setup_pmic() function to call directly from power_init_board() - split gpio setup into early (iomux and default pin config) and late (output configuration based on env) Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: default msata/pci mux to pci before PCI enumerationTim Harvey
PCI enumeration occurs early, before we fully configure our GPIO's. Make sure we steer the MSATA/PCI mux to PCI in board_init to ensure PCI is selected before enumeration. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: fix pcie reset for GW522xTim Harvey
The re-assignment of pcie_rst gpio for GW522x needs to occur earlier, before the PCI subsystem calls the toggle funciton. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: config: enable Thermal supportTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: enable DM_SERIALTim Harvey
mxc_serial supports DM so lets use it. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: register gpio's with gpio_requestTim Harvey
Prior to using a gpio a call to gpio_request() should be called to register it with the gpio subsystem. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: config: enable driver modelTim Harvey
Enable U-Boot Driver Model (DM). Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: config: enable gpio commandTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: display SPL boot deviceTim Harvey
Display what device the SPL will fetch uboot.img from Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15imx: ventana: set dtype env var to boot mediaTim Harvey
Bootscripts for some distro's such as Android can benefit from knowing what boot media its script was loaded from. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2015-05-15arm: mx6: ddr3: Remove dead codeNikolay Dimitrov
imx6 mmdc supports data rates up to 1066 MT/s, so remove the code handling higher data rates. Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
2015-05-15mx6: Set shared override bit in PL310 AUX_CTRL registerFabio Estevam
Having bit 22 cleared in the PL310 Auxiliary Control register (shared attribute override enable) has the side effect of transforming Normal Shared Non-cacheable reads into Cacheable no-allocate reads. Coherent DMA buffers in Linux always have a Cacheable alias via the kernel linear mapping and the processor can speculatively load cache lines into the PL310 controller. With bit 22 cleared, Non-cacheable reads would unexpectedly hit such cache lines leading to buffer corruption. This was inspired by a patch from Catalin Marinas [1] and also from recent discussions in the linux-arm-kernel list [2] where Russell King and Rob Herring suggested that bootloaders should initialize the cache. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2010-November/031810.html [2] https://lkml.org/lkml/2015/2/20/199 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2015-05-15tbs2910: add CONFIG_SUPPORT_EMMC_BOOTSoeren Moch
Add emmc boot partition commands to be able to select the boot partition. Signed-off-by: Soeren Moch <smoch@web.de>
2015-05-15tbs2910: use default CONFIG_SYS_PBSIZESoeren Moch
Since there is a default CONFIG_SYS_PBSIZE definition in config_fallbacks.h, this setting is no longer required in board configurations. Signed-off-by: Soeren Moch <smoch@web.de>
2015-05-15tbs2910: only enable vga output for stdout/stderr when hdmi detectedSoeren Moch
Only enable graphical output for stdout/stderr (and a usb keyboard for stdin) when a hdmi device is detected. Serial console is always enabled for stdin/stdout/stderr. Signed-off-by: Soeren Moch <smoch@web.de>
generated by cgit v0.10.2 at 2024-07-11 16:32:16 (GMT)