summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-06-14video: sm501: add support for SM501 chips on PCI busAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-06-14video: cfb_console: add weak default video_set_lut()Anatolij Gustschin
Do not enforce drivers to provide empty video_set_lut() if they do not implement indexed color (8 bpp) frame buffer support. Add default function to the cfb_console driver and remove empty video_set_lut() functions. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-06-13Makefile/mkconfig: read simple board configurations from boards.cfgWolfgang Denk
Instead of adding explicit build rules for each and every board to the top level Makefile (which makes it grow and grow), we now provide a simple default rule and extend the "mkconfig" script to read board configurations from a plain text file (table), "boards.cfg". For simple boards it is now sufficient to add a single line of text to the "boards.cfg" file, no changes to the top level Makefile are needed any more. To make the table better readable, change the notation for unused fields from "NULL" into "-". Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Mike Frysinger <vapier@gentoo.org>
2010-06-13Makefile: simplify handling of common board configurationsWolfgang Denk
Many boards don't need any special handling in the Makefile. Try and provide as generic make rules for these as possible. There are still many areas where this does not work out really well, but the changes show the direction we should take, and point out which boards or architectures need further cleanup. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-13Makefile: simplify handling of build target namesWolfgang Denk
Instead of stripping the "_config" part from the make target names in each call of the "mkconfig" script let this script strip the string. This prepares the ground for forther simplification of the top level Makefile. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-13Fix printing of make targets, simplify MakefileWolfgang Denk
Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-06-13Prepare v2010-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-04Update SICRL_USBDR to reflect 4 different settingsRon Madrid
This patch changed the SICRL_USBDR define to reflect the 4 different bit settings for this two-bit field. The four different options are '00', '01', '10', and '11'. This patch also corrects the config file for SIMPC8313 and MPC8313ERDB for the appropriate fields. This change only affects the MPC8313 cpu. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-05-30Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-05-30Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-05-30fdt_support: add entry for sec3.1 and fix sec3.3Kim Phillips
Add sec3.1 h/w geometry for fdt node fixups. Also, technically, whilst SEC v3.3 h/w honours the tls_ssl_stream descriptor type, it lacks the ARC4 algorithm execution unit required to be able to execute anything meaningful with it. Change the node to agree with the documentation that declares that the sec3.3 really doesn't have such a descriptor type. Reported-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-30fsl: rename 'dma' to 'brdcfg1' in the ngPIXIS structureTimur Tabi
The ngPIXIS is a board-specific FPGA, but the definition of the registers is mostly consistent. On boards where it matter, register 9 is called 'brdcfg1' instead of 'dma', so rename the variable in the ngpixis_t definition. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-30fsl/85xx: add clkdvdr and pmuxcr2 to global utilities structure definitionTimur Tabi
Add the 'clkdvdr' and 'pmuxcr2' registers to the 85xx definition of struct ccsr_gur. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-28Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk
2010-05-28ARM Update mach-typesTom
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 3defb2476166445982a90c12d33f8947e75476c4 Signed-off-by: Tom <Tom@bumblecow.com>
2010-05-28Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk
2010-05-28Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk
2010-05-28ARM Update mach-typesTom
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 257dab81413b31b8648becfe11586b3a41e5c29a Signed-off-by: Tom <Tom@bumblecow.com>
2010-05-28nios: remove nios-32 archThomas Chou
The nios-32 arch is obsolete and broken. So it is removed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2010-05-28nios2: allow STANDALONE_LOAD_ADDR overridingThomas Chou
This patch allows users to override default STANDALONE_LOAD_ADDR. The gcclibdir path was duplicated in the standalone Makefile and can be removed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28nios2: fix div64 issue for gcc4Thomas Chou
This patch fixes the run-time error on div64 when built with gcc4, which was reported by jhwu0625 on nios forum. It merges math support from libgcc of gcc4. This patch is copied from nios2-linux. It works with both gcc3 and gcc4. The old mult.c, divmod.c and math.h are removed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28nios2: fix r15 issue for gcc4Thomas Chou
The "-ffixed-r15" option doesn't work well for gcc4. Since we don't use gp for small data with option "-G0", we can use gp as global data pointer. This allows compiler to use r15. It is necessary for gcc4 to work properly. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28spi: add altera spi controller supportThomas Chou
This patch adds the driver of altera spi controller, which is used as epcs/spi flash controller. It also works with mmc_spi driver. This driver support more than one spi bus, with base list declared #define CONFIG_SYS_ALTERA_SPI_LIST { BASE_0,BASE_1,... } Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28nios2: add gpio support to nios2-generic boardThomas Chou
This patch adds gpio support of Altera PIO component to the nios2-generic board. Though it drives only gpio_led at the moment, it supports bidirectional port to control bit-banging I2C, NAND flash busy status or button switches, etc. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28misc: add gpio based status led driverThomas Chou
This patch adds a status led driver followed the GPIO access conventions of Linux. The led mask is used to specify the gpio pin. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28nios2: add gpio supportThomas Chou
This patch adds driver for a trivial gpio core, which is described in http://nioswiki.com/GPIO. It is used for gpio led and nand flash interface in u-boot. When CONFIG_SYS_GPIO_BASE is not defined, board may provide its own driver. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-05-28add CONFIG_SYS_FEC_FULL_MII for MCF5445xWolfgang Wegner
This patch adds support for full MII interface on MCF5445x (in contrast to RMII as used on the evaluation boards). Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
2010-05-28add CONFIG_SYS_FEC_NO_SHARED_PHY for MCF5445xWolfgang Wegner
This patch adds the possibility to handle seperate PHYs to MCF5445x. Naming is chosen to resemble the contrary CONFIG_FEC_SHARED_PHY in the linux kernel. Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
2010-05-28add missing PCS3 for MCF5445xWolfgang Wegner
This patch adds the code for handling PCS3 (DSPI chip select 3) in cpu_init.c and m5445x.h Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
2010-05-27USB: fix create_pipe()Sergei Shtylyov
create_pipe() can give wrong result if an expression is passed as the 'endpoint' argument -- due to missing parentheses. Thanks to Martin Mueller for finding the bug and providing the patch. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2010-05-26Blackfin: nand: drain the write buffer before returningAndrew Caldwell
The current Blackfin nand write function fills up the write buffer but returns before it has had a chance to drain. On faster systems, this isn't a problem as the operation finishes before the ECC registers are read, but on slower systems the ECC may be incomplete when the core tries to read it. So wait for the buffer to drain once we're done writing to it. Signed-off-by: Andrew Caldwell <Andrew.Caldwell@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-26Prepare v2010.06-rc1Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-26Coding style cleanup, update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-26Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2010-05-26config.mk: use different host compiler for OS X 10.6Andreas Biessmann
Compiling tools subdirectory on Mac OS X 10.6 (Snow Leopard) complains about wrong syntax in system includes. In file included from /usr/include/stdio.h:444, from ../source/u-boot/include/compiler.h:26, from ../source/u-boot/lib/crc32.c:15: /usr/include/secure/_stdio.h:46: error: syntax error in macro parameter list This can be fixed by reverting the workaround for prior OS X releases in config.mk conditionally for OS X 10.6+. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-05-26Convert Makefiles from COBJS-${} to COBJS-$()Kumar Gala
Match style we use almost everywhere else Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-26powerpc/bootcount: Fix endianness problemMichael Weiss
For CONFIG_SYS_BOOTCOUNT_SINGLEWORD the code had an endianness problem. Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-05-26dm9000x.c: fix compile problemsWolfgang Denk
Use readX() / writeX() accessors instead of inX() / outX(). Suggested-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-21a320evb: fix udelay / __udelay confusionWolfgang Denk
Fix the following compiler problems: arch/arm/cpu/arm920t/a320/liba320.a(timer.o): In function `udelay': /home/wd/git/u-boot/work/arch/arm/cpu/arm920t/a320/timer.c:160: multiple definition of `udelay' lib/libgeneric.a(time.o):/home/wd/git/u-boot/work/lib/time.c:34: first defined here lib/libgeneric.a(time.o): In function `udelay': time.c:(.text+0x1c): undefined reference to `__udelay' Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-21ARM: */timer.c: fix spelling and vertical alignmentWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-21bugfix: Guruplug: Use standard miiphyMahavir Jain
call to reset PHY chip. Current PHY Software Reset operation in guruplug does not poll reset bit in control register to go to 0(auto clearing) for making sure reset was successful.This patch uses standard miiphy call miiphy_reset to make sure proper PHY reset operation. Signed-off-by: Mahavir Jain <mjain@marvell.com>
2010-05-21Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk
2010-05-21mpc83xx: don't shift pre-shifted ACR, SPCR, SCCR bitfield masks in cpu_init.cKim Phillips
commit c7190f028fa950d4d36b6d0b4bb3fc72602ec54c "mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields" incorrectly shifted <register>_<bitfield> (e.g. ACR_PIPE_DEP) values that were preshifted by their definition in mpc83xx.h. this patch removes the unnecessary shifting for the newly utilized mask values in cpu_init.c, and prevents seemingly unrelated symptoms such as an mpc8379erdb board from locking up whilst performing a networking operation, e.g. a tftp. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-05-21Fixed two typos in arch/powerpc/cpu/mpc83xx/start.S.Horst Kronstorfer
Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-05-21Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk
2010-05-21Fix "par[t]ition" typo.Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-19UBI: Fix problem in UBI/Linux "compatibility layer"Stefan Roese
"down_write_trylock" needs to return 1 instead of 0 for success. Otherwise copying a block with a read error (e.g. bit-flip on read) won't work correctly. Signed-off-by: Stefan Roese <sr@denx.de>
2010-05-19UBI: Ensure that "background thread" operations are really executedStefan Roese
The current U-Boot UBI implementation is copied from Linux. In this porting the UBI background thread was not handled correctly. Upon write operations ubi_wl_flush() makes sure, that all queued operations, like page-erase, are completed. But this is missing for read operations. This patch now makes sure that such operations (like scrubbing upon bit-flip errors) are not queued, but executed directly. Signed-off-by: Stefan Roese <sr@denx.de>
2010-05-19MX31: Added support for the Casio COM57H5M10XRC to QONGStefano Babic
The patch adds setup to connect a CASIO COM57H5M10XRC (640x480 TFT display) to the QONG module. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-05-17fsl_diu_fb.c: fix build warningsWolfgang Denk
Commit 15351855 "fsl-diu: Using I/O accessor to CCSR space" caused a number of "passing argument 2 of 'out_be32' makes integer from pointer without a cast" warnings; fix these. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Dave Liu <daveliu@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v0.10.2 at 2024-11-19 21:40:48 (GMT)