summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-21arm: Tegra2: Add support for NVIDIA Seaboard boardTom Warren
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-02-21arm: Tegra2: Add support for NVIDIA Harmony boardTom Warren
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-02-21serial: Add Tegra2 serial port supportTom Warren
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-02-21arm: Tegra2: Add basic NVIDIA Tegra2 SoC supportTom Warren
Signed-off-by: Tom Warren <twarren@nvidia.com>
2011-02-21mx31pdk: Make the full boot log visibleFabio Estevam
Use board_early_init_f so that the full boot log output can be displayed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-02-21mx31pdk: Use the new relocation schemeFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-02-21EfikaMX: switch to MACH_TYPE_MX51_EFIKAMXLoïc Minier
Upstream linux moved from MACH_TYPE_MX51_LANGE51 to MACH_TYPE_MX51_EFIKAMX. Signed-off-by: Loïc Minier <loic.minier@linaro.org>
2011-02-19Fix compile warning in net/eth.cRemy Bohmer
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2011-02-19Fix build warnings in cmd_flash.cRemy Bohmer
These variables are only used in case CONFIG_SYS_NO_FLASH is NOT set: struct mtd_device *dev; struct part_info *part; u8 dev_type, dev_num, pnum; Signed-off-by: Remy Bohmer <linux@bohmer.net>
2011-02-19USB-RNDIS: Send RNDIS state on disconnectingVitaly Kuzmichev
Add waiting for receiving Ethernet gadget state on the Windows host side before dropping pullup, but keep it for debug. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2011-02-19USB: Add USB RNDIS gadget protocolVitaly Kuzmichev
Port USB gadget RNDIS protocol support from linux-2.6.26 (.27 gadget stack actually has composite drivers). Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2011-02-19USB-CDC: Move struct declaration before its useVitaly Kuzmichev
Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2011-02-19USB-CDC: Port struct net_device_statsVitaly Kuzmichev
Port struct net_device_stats and statistics collecting needed for RNDIS protocol. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2011-02-19USB-CDC: handle interrupt after dropped pullupVitaly Kuzmichev
Disconnecting USB gadget with pending interrupt may cause its wrong handling in the next time when interface will be started again (especially actual for RNDIS). This interrupt may force the gadget to queue unexpected response before setup stage. Despite the fact that such interrupt handled after dropped pullup also may add pending response, this will not bring to any issues due to usb_ep_disable (which clears the queue) called on gadget unregistering. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
2011-02-19Add support for ASIX AX88772 USB 2.0 10/100Mbit Ethernet AdaptorSimon Glass
Driver originally written by NVIDIA Corporation, modified to handle odd-length packets. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-02-19Add USB host ethernet adapter supportSimon Glass
This adds support for using USB Ethernet dongles in host mode. This is just the framework - drivers will come later. A new config option called CONFIG_USB_HOST_ETHER can be defined in board config files to switch this on. The was originally written by NVIDIA and was cleaned up for release by the Chromium authors. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-02-19Fix EHCI usb submit timeout and unify with OHCISimon Glass
Changed both to use a common timeout for URB submission, since they were using different values and EHCI's was too short. Also fixed EHCI to actually check if urb submission succeeded, rather than silently continuing into the weeds. Change-Id: I7f71499ffaa05187d8e5618db2419e1606007b82 Signed-off-by: Simon Glass <sjg@chromium.org>
2011-02-15add checking the CONFIG_ENV_IS_IN_SPI_FLASH in Enbedded envYoshihiro Shimoda
Fix the problem which cannot build the U-boot, if we only set the CONFIG_ENV_IS_IN_SPI_FLASH. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2011-02-15net: ne2000: Add spport RTL-8019ASNobuhiro Iwamatsu
Add infomation of RTL-8016AS to hw_info. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
2011-02-15unzip: return uncompressed size in `filesize', and print it.Wolfgang Denk
The unzip command did not provide a way for the caller to get any information about the uncompressed size. To make it better usable in scripts, we now store the uncompressed size in the `filesize' variable, like we do when for example loading a file over the network or when reading it from a file system. Following that analogy, it is only consequent to also print the size. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-02-15itest: fix result of string comparesWolfgang Denk
The implementation of the string compare function of the "itest" command was weird, as only the length of the shortest argument was included in the compare, with the result that something like "itest.s abd == abddef" would return TRUE. Fix this. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-02-15microblaze: Fix msr handling in interrupt_handlerMichal Simek
Fix ancient code which worked with MSR in a bad way. Use rtid instruction which enable IRQs and jump. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-02-15microblaze: Fix systems with MSR=0Michal Simek
u-boot BSP generates XILINX_USE_MSR_INSTR macro even for system with MSR=0. That's why explicitly check that MSR=1. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-02-12Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk
2011-02-12eNET: Move initial Global Data into CARGraeme Russ
2011-02-12sc520: Release CAR and enable cachingGraeme Russ
2011-02-12x86: Convert board_init_f to use an init_sequenceGraeme Russ
2011-02-12x86: Rearrange function calls in board_init_fGraeme Russ
2011-02-12x86: Split board_init_f() into init_fnc_t compatible functionsGraeme Russ
2011-02-12x86: Fix incorrect usage of relocation offsetGraeme Russ
x86 has always used relocation offset in the opposite sense to the ELF standard - Fix this
2011-02-12x86: Move console initialisation into board_init_fGraeme Russ
2011-02-12x86: Move test for cold boot into init functionsGraeme Russ
2011-02-12x86: Move call to dram_init_f into board_init_fGraeme Russ
2011-02-12x86: Defer setup of final stackGraeme Russ
2011-02-12sc520: Move RAM sizing code from asm to CGraeme Russ
2011-02-12x86: Use Cache-As-RAM for initial stackGraeme Russ
2011-02-12x86: Move initial gd to fixed locationGraeme Russ
2011-02-12eNET: General code cleanupGraeme Russ
2011-02-12eNET: Rearrange PAR assignmentsGraeme Russ
2011-02-12eNET: Define MMCR values in config.hGraeme Russ
2011-02-12eNET: Add RTC support to eNETGraeme Russ
The SC520 has an inbuilt MC146818 - Enable it for the eNET board
2011-02-12eNET: Fix eNET Interrupt Setup for LinuxGraeme Russ
Fix minor issues with the configuration of the hardware interrupts for Linux when booting the eNET board
2011-02-12sc520: Remove printf calls from cpu_init_fGraeme Russ
In later patches, cpu_init_f will be called before console has been initialised and printf will not be legitimately available
2011-02-12sc520: Move board specific settings to board init functionGraeme Russ
2011-02-12sc520: Define MMCR address in include fileGraeme Russ
2011-02-12x86: Make cpu init functions weakGraeme Russ
2011-02-12x86: Call early_board_init when warm bootingGraeme Russ
early_board_init has been skipped to avoid SDRAM corruption in the case that a fully relocatable image has been loaded into SDRAM and is being executed from SDRAM. x86 is being aligned with other architectures (ARM and PPC in particlar) and will be using Cache-As-RAM to run a C environment from Flash (or SRAM if you have some). early_board_init may be needed to assist in the setup of Cache-As-RAM and the early C environment
2011-02-12x86: Add processor flags header from linuxGraeme Russ
2011-02-12x86: Move Global Descriptor Table defines to processor.hGraeme Russ
2011-02-12x86: Add stack dump to register dumpGraeme Russ