summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-04arm64: ls1088ardb: Add distro secure boot supportPrabhakar Kushwaha
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-09-04arm64: ls2088ardb: Add distro secure boot supportVinitha Pillai-B57223
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd. Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
2017-09-04ls1088a: Correct the channel number for LTC3882 voltage regulatorRajesh Bhagat
Corrects the channel number passed in i2c write operation for LTC3882 voltage regulator. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-09-04pci: layerscape: Fixup iommu-map for LS208xABharat Bhushan
"pci: layerscape: Fixup device tree node for ls2088a" added support for LS208xA devices but fixing iommu-map property is missing. This patch adds support for fixing iommu-map. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
2017-09-04armv8: ls1012a: Memory Map modification of kernel,envBhaskar Upadhaya
This patch adjusts memory map for images on LS1012A as per below memory map: Image Flash Offset RCW+PBI 0x00000000 Boot firmware (U-Boot) 0x00100000 Boot firmware Environment 0x00300000 Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
2017-09-04armv8: ls1088a: Enable PCIe in defconfigsHou Zhiqiang
Enabled PCIe support and PCI command feature. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-09-04armv8: ls1088a: correct pcie fixup compatible stringHou Zhiqiang
LS1088A has the same PCIe controller as LS2088A, and the LS1088A used LS2088A PCIe compatible under Linux. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-09-04armv8: ls1088a: add PCIe dts nodeHou Zhiqiang
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-09-04armv8: ls1088a: fix the MMU table for pcie config spaceHou Zhiqiang
The pcie config space of ls1088a is different from ls2080a. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-09-03arm64: ls2080ardb: Add sd_bootcmd for distro fallback in case of sdbootShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-09-03armv7: ls1021atwr: Add sd_bootcmd for distro fallback in case of sdbootShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-09-03arm64: ls1046ardb: Add sd_bootcmd for distro fallback in case of sdbootShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-09-03arm64: ls1043ardb: Add sd_bootcmd for distro fallback in case of sdbootShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-09-03armv8: sec_firmware: Add support for loadables in FITSumit Garg
Enable support for loadables in SEC firmware FIT image. Currently support is added for single loadable image. Brief description of implementation: - Add two more address pointers (loadable_h, loadable_l) as arguments to sec_firmware_init() api. - Create new api: sec_firmware_checks_copy_loadable() to check if loadables node is present in SEC firmware FIT image. If present, verify loadable image and copies it to secure DDR memory. - Populate address pointers with secure DDR memory addresses where loadable is copied. Example use-case could be trusted OS (tee.bin) as loadables node in SEC firmware FIT image. Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-09-03armv8: layerscape: Allocate 66 MB DDR for secure memorySumit Garg
Change DDR allocated for secure memory from 2 MB to 66 MB. This additional 64 MB secure memory is required for trusted OS running in Trusted Execution Environment using ARMv8 TrustZone. Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-08-30armv8: fsl-layerscape: Fix final MMU table for QSPI and IFCSuresh Gupta
For QSPI and IFC addresses execution shouldn't be allowed when u-boot running from DDR. Revise the MMU final table to enforce execute-never bits. Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
2017-08-30ls1088a: Add VID support for QDS and RDB platformsPrabhakar Kushwaha
This patch adds the support for VID on LS1088AQDS and LS1088ARDB systems. It reads the fusesr register and changes the VDD accordingly by adjusting the voltage via LTC3882 regulator. This patch also takes care of the special case of 0.9V VDD is present in fusesr register. In that case,it also changes the SERDES voltage by disabling the SERDES, changing the SVDD and then re-enabling SERDES. Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-30board: common: vid: Add support for LTC3882 voltage regulator chipPrabhakar Kushwaha
Restructures common driver to support LTC3882 voltage regulator chip. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-30Kconfig: Add LTC3882 voltage regulator configPrabhakar Kushwaha
Adds below LTC3882 voltage regulator config: CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-30board: common: vid: Move IR chip specific code in flagRajesh Bhagat
Moves IR chip (IR36021) specific code in flag to resolve compilation issue where it is not present. For example, LS1088A is having a new LTC3882 voltage chip. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-30board: common: vid: Add board specific vdd adjust APIRajesh Bhagat
Adds a board specific API namely board_adjust_vdd which is required to define the board VDD adjust settings. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-30board: common:vid: Add LS1088A VID Supported voltage valuesRajesh Bhagat
Adds below voltage values supported by LS1088A Soc: 1.025 V(default), 0.9875V, 0.9750 V, 0.9V, 1.0 V, 1.0125 V, 1.0250 V Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-30armv8: lsch3: Add serdes and DDR voltage setupRajesh Bhagat
Adds SERDES voltage and reset SERDES lanes API and makes enable/disable DDR controller support 0.9V API common. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-29armv8: fsl: Use correct conditional compile for ls1012aRan Wang
According current code base, CONFIG_LS1012A should be CONFIG_ARCH_LS1012A, or function fsl_fdt_disable(blob) will be wrongly called to disable all dwc3 USB nodes on LS1012A, which cause Linux USB function stop working at all. Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2017-08-29arm64: ls1046ardb: Add distro secure boot supportSumit Garg
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to qspi boot in case of secure boot. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com>
2017-08-29arm64: ls1043ardb: Add distro secure boot supportSumit Garg
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to nor/qspi boot in case of secure boot. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com>
2017-08-29armv8/ls1088a: configure PMU's PCTBENR to enable WDTZhang Ying-22455
The SP805-WDT module on LS1088A requires configuration of PMU's PCTBENR register to enable watchdog counter decrement and reset signal generation. The watchdog clock needs to be enabled first. Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
2017-08-29LS2080AQDS: Move sec_init prior to ppa_init.Udit Agarwal
SEC must be initialised before PPA is validated, so call sec_init() ahead of ppa_init(). Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
2017-08-29LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA in defconfig.Udit Agarwal
Adds config CONFIG_FSL_LS_PPA and CONFIG_FSL_CAAM in LS2080AQDS and LS2080ARDB secure boot defconfig. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
2017-08-29LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.Udit Agarwal
Add the secure boot defconfigs for QSPI boot on LS1088ARDB and LS1088AQDS platforms. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
2017-08-29 LS1088A_QSPI: SECURE_BOOT: Images validationPrabhakar Kushwaha
Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC phase using esbc_validate command. Add images validation in default environment under mcinitcmd prior to MC initialization. Add header address for PPA to be validated during ESBC phase for LS1088A platform based on LAyerscape Chasis 3. Moves sec_init prior to ppa_init as for validation of PPA sec must be initialised before the PPA is initialised. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
2017-08-29ls1088ardb: Add SD Secure boot target supportSumit Garg
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-08-29armv8: ls1088a: SPL size reductionPrabhakar Kushwaha
Using changes in this patch we were able to reduce approx 8k size of u-boot-spl.bin image. Following is breif description of changes to reduce SPL size: 1. Changes in board/freescale/ls1088a/Makefile to remove compilation of eth.c and cpld.c in case of SPL build. 2. Changes in board/freescale/ls1088a/ls1088a.c to keep board_early_init_f funcations in case of SPL build. 3. Changes in ls1088a_common.h & ls1088ardb.h to remove driver specific macros due to which static data was being compiled in case of SPL build. 4. Enable CONFIG_SYS_DCACHE_OFF in case of SPL build as DCACHE is not being enabled in case of SPL image but was compiled in to add redundant code. Signed-off-by: Sumit Garg <sumit.garg@nxp.com
2017-08-29armv8: fsl-layerscape: SPL size reductionPrabhakar Kushwaha
Using changes in this patch we were able to reduce approx 4k size of u-boot-spl.bin image. Following is breif description of changes to reduce SPL size: 1. Compile-off mp.c and libfdt.c in case of SPL build. 2. Keep MMU and DCACHE specific variable and functions under CONFIG_SYS_DCACHE_OFF macro. 3. Compile-off IFC specific funtion call "init_early_memctl_regs" in case of SPL build. Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-08-27arm64: ls1088ardb: Add distro boot supportAshish Kumar
Tested on ls1088ardb with automatically boot Ubuntu from SD card or USB disk, if it fails to detect external storage disk, fall back to qspi/sd boot. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Zhang Ying <zhangying@nxp.com>
2017-08-27configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITESumit Garg
As part of chain of trust with confidentiality along with distro boot, linux kernel image needs to be stored in encrypted form on ext4 boot partition. So enable CONFIG_CMD_EXT4_WRITE in case of Secure boot. Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-08-25ls1088aqds: Add SCSI related configs in header file for qdsAshish Kumar
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-25ls1088ardb: Add SCSI related configs in header file for RDBAshish Kumar
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-25ls1088aqds: Enbale USB command on QDS for SD-bootAshish Kumar
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-25ls1088aqds: Enable USB command on QDS for qspi-bootAshish Kumar
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-25ls1088ardb: Enbale USB command on RDB sd-bootAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
2017-08-25ls1088ardb: Enable USB command RDB qspi-bootAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
2017-08-25board/ls2080ardb: Update board env based on SoCPriyanka Jain
As per current implemenetation, default value of board env is based on board filename i.e ls2080ardb. With distro support changes, this env is used to decide upon kernel dtb which is different for other SoCs (ls2088a, ls2081a) combination supported with this board. Add support to modify board env based on SoC type Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2017-08-25spi: fsl_qspi: Add controller busy check before new spi operationSuresh Gupta
It is recommended to check either controller is free to take new spi action. The IP_ACC and AHB_ACC bits indicates that the controller is busy in IP or AHB mode respectively. And the BUSY bit indicates that controller is currently busy handling a transaction to an external flash device Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
2017-08-25PCI: layerscape: Make the pcie link up status judgement more specificBao Xiaowei
For some special reset times for longer pcie devices, in this case, the pcie device may on polling compliance state, the RC considers the pcie device is link up, but the pcie device is not link up, only the L0 state is link up state. So add the link up status judgement mechanisms. Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com>
2017-08-23armv8: ls1088aqds: Add SD boot support for ls1088qdsAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-23armv8: ls1088ardb: Add SD boot support for ls1088Ashish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-23Makefile: Concatenation of u-boot-spl.bin and u-boot.imgAshish Kumar
Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape platform SoC: LS1088A/LS2080A and their variants This patch also depricates UBOOT_BINLOAD in favour of SPL_PAYLOAD Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-23board:ls1088aqds: Add support of EC1 and EC2Prabhakar Kushwaha
EC1 and EC2 are RGMII interface on ls1088aqds platform. This patch add support of RGMII with PHY and MDIO Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
2017-08-23armv8: fsl-layerscape: Support to add RGMII for ls1088aqdsAshish Kumar
This patch adds support RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting both RGMII and SGMII. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
generated by cgit v0.10.2 at 2024-05-12 08:09:03 (GMT)