summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-17configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16test/py/tests/test_sleep.py: test time approximatelyHeinrich Schuchardt
On qemu errors like assert 2.999650001525879 >= 3 occur. According to the comment in the code the test is meant to be approximate. So we should accept some milliseconds less. Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2017-10-16scripts/get_maintainer.pl: update to current versionHeinrich Schuchardt
Update the script to version 0.26 (as of Linux v4.14-rc1) Keep our "penguin_chief". Keep our top_of_kernel_tree. The negative forms of the command line parameters are described when using --help. New options are --git-blame-signatures => when used with --git-blame, also include all commit signers --r => include reviewer(s) if any --letters => print all matching 'letter' types from all matching sections File .get_maintainer.ignore can be used to specify email addressees that shall be ignored. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-10-16arm: dra76: fastboot: extend cpu type for getvar commandPraneeth Bajjuri
'commit fa24eca1f20a ("omap: Add routine for setting fastboot variables")' adds initial support and usage of "fastboot getvar" command for DRA75x and DRA72x devices. and 'commit 0f9e6aee9dbc ("arm: dra76: Add support for ES1.0 detection")' adds initial dra76 device definition This patch is to extend usage of "fastboot getvar" for DRA76 device. Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-16omap-common: fastboot: extend cpu type for DRA71x rev 2.1Vishal Mahaveer
DRA71x processors are reduced pin and software compatible derivative of DRA72 processors. Extend support for this revision in "getvar cpu" command. Signed-off-by: Vishal Mahaveer <vishalm@ti.com> [praneeth@ti.com: rebase to u-boot master] Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-16arm: dra7xx: Add vendor partition to Android GPT table for eMMCVishal Mahaveer
Add vendor partition to Android GPT table for eMMC. A Vendor image contains SoC-specific code and configuration. Prior to Android 8.0, the vendor partition was optional ; files belonging to these images were placed in boot.img or system.img with symlinks (such as /vendor >/system/vendor ) when absent. Android 8.0 makes the vendor partition mandatory The goal is to modularize Android partitions with standard interface between the Android Platform (on system.img ) and vendor-provided code(on vendor.img). This standard interface enables the Android Platform to be updated without affecting the SoC partitions. This makes it possible to upgrade a device system.img from Android 8.0 to Android P while other images (such as vendor.img) remain at Android 8.0. This modularity enables timely Android platform upgrades (such as monthly security updates ) without requiring SoC/ODM partners to update SoC- and device-specific code. Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-16arm: am57xx: Add vendor partition to Android GPT table for eMMCPraneeth Bajjuri
Add vendor partition to Android GPT table for eMMC. A Vendor image contains SoC-specific code and configuration. Prior to Android 8.0, the vendor partition was optional ; files belonging to these images were placed in boot.img or system.img with symlinks (such as /vendor >/system/vendor ) when absent. Android 8.0 makes the vendor partition mandatory The goal is to modularize Android partitions with standard interface between the Android Platform (on system.img ) and vendor-provided code(on vendor.img). This standard interface enables the Android Platform to be updated without affecting the SoC partitions. This makes it possible to upgrade a device system.img from Android 8.0 to Android P while other images (such as vendor.img) remain at Android 8.0. This modularity enables timely Android platform upgrades (such as monthly security updates ) without requiring SoC/ODM partners to update SoC- and device-specific code. Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-16usbtty: fix typosHeinrich Schuchardt
Fix typos in USB tty driver. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-10-16tools: env: Add embedded.c to .gitignoreBin Meng
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-16cmd/pxe.c: Rework bootargs construction to clarify string checksTom Rini
As the code currently stands, we first check that the length of the given command line, along with ip_str/mac_str along with an additional 1 for the NULL termination will fit within the buffer we have, and if not, we return an error. The way this code was originally written however left Coverity "unhappy" due to using strcat rather than strncat. Switching this to strncat however causes clang to be unhappy that we aren't enforcing the "1" portion within strncat. Rather than further re-work the code to include a "- 1" in this case as well, make the strcat code only be done within the else side of the length test. This keeps both clang and Coverity happy. Fixes: 48ee0a87bc46 ("cmd/pxe.c: Rework initrd and bootargs handling slightly") Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16kbuild: fix dependency of DT buildMasahiro Yamada
I saw a DT build issue report some time before [1]. I was able to reproduce the bug, and figure out the root cause. Since commit 6d427c6b1fa0 ("binman: Automatically include a U-Boot .dtsi file"), invalid .*.cmd files are generated. Since that commit, DTS files are put into sed and piped to CPP. Because CPP reads the stream from stdin, -Wp,-MD,$(depfile).pre.tmp option generates a depfile with the target name "-". This is not the format expected by fixdep. Use one more temporary file instead of using pipe. With this, deps_ in the .*.cmd will be fixed. Having a temp file name in source_ is odd, but it is unsed in the build system. Not a big deal. [1] https://lists.denx.de/pipermail/u-boot/2017-June/294451.html Fiexes: 6d427c6b1fa0 ("binman: Automatically include a U-Boot .dtsi file") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-16common: Remove genimg_get_image()Tuomas Tynkkynen
Removal of the legacy DataFlash code turned genimg_get_image() into a no-op. Drop all calls to it and the function itself. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16Drop CONFIG_HAS_DATAFLASHTuomas Tynkkynen
Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16spi: Drop CONFIG_ATMEL_DATAFLASH_SPITuomas Tynkkynen
Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-10-16env: Drop CONFIG_ENV_IS_IN_DATAFLASHTuomas Tynkkynen
Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16fs/jffs2/mini_inflate.c: use "static inline" instead of "inline"Vagrant Cascadian
This makes gcc no longer expect an out-of-line version of the functions being present elsewhere. This fixes a failure to build on several marvell targets with gcc-7 on Debian: https://bugs.debian.org/877963 Signed-off-by: Adrian Bunk <bunk@debian.org> Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
2017-10-16jffs2: ECC corrected nand data is ignoredEngling, Uwe
Hello, I ran into a problem with the JFFS2 filesystem driver implemented in U-Boot. I've got a NAND device that has correctable ECC errors (corrected somewhere in mtd/nand/nand_base.c). The NAND driver tells the filesystem layer (jffs2_1pass.c) above that there occurred correctable ECC errors and returns with a "value > 0". The JFFS2 driver recognizes the corrected ECC errors as real error and skips this block because the only accepts a "return value == 0" as correct. This problem exists for over 8 years (I checked version 2010.09) so I'm a little bit worried that I interpreted something wrong or didn't get the whole context. Can someone confirm this bug (and the bugfix) in the u-boot jffs2 driver? There was a mail in 2012 that mentioned the same problem, but there was no patch: http://u-boot.10912.n7.nabble.com/JFFS2-seems-to-drop-nand-data-with-ECC-corrections-td142008.html Sometime after this discussion the return value of nand_read() changed from -EUCLEAN as correctable ECC error to a positive value with the count of ECC corrected errors. With kind reguards, Uwe Engling
2017-10-16ARM: Add documentation for the qemu-arm boardTuomas Tynkkynen
Add brief documentation for the recently merged qemu-arm board. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16mmc: stm32_sdmmc2: increase polling status register delayChristophe Kerello
MMC commands like MMC_CMD_ALL_SEND_CID or MMC_CMD_SEND_CSD can reach 500 us. This patch increases the polling status register delay to avoid a timeout on a command. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-16dm: clk: fix PWR_CR3 register's bit 2 namePatrice Chotard
Fix bit 2 name of PWR_CR3 register to match with the last STM32H7 reference manual available here : http://www.st.com/content/st_com/en/support/resources/ resource-selector.html?querycriteria=productId=SS1951$$ resourceCategory=technical_literature$$resourceType=reference_manual Update also comment about voltage scaling 1 values Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-10-16dm: clk: remove CLK() macro for clk_stm32h7Patrice Chotard
CLK() macro is a residue of a previously reworked patch, remove it. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-10-16ARM: tegra: Remove unused define CONFIG_ARMCORTEXA9Tuomas Tynkkynen
This macro isn't used by anything, and in fact hasn't ever been used according to the Git logs. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16fs: Set .opendir to fs_opendir_unsupported for btrfsMarek Behún
Otherwise fs_opendir will fault. Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16fs: btrfs: Remove a foreign language noteMarek Behún
I accidentaly left a foreign language note in the code from development. Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16fs: btrfs: Fix usage of uninitialized variablesMarek Behún
The variable res should be initialized to 0 in these functions, because if the searched key is not found, the variable is used uninitialized. Reported-by: Coverity (CID: 167335) Reported-by: Coverity (CID: 167336) Reported-by: Coverity (CID: 167337) Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16linux/time.h: Remove dead codeMarek Behún
Since rem = ((long) *tim_p) % SECSPERDAY; the second while cycle while (rem >= SECSPERDAY) is dead. Reported-by: Coverity (CID: 167334) Signed-off-by: Marek Behun <marek.behun@nic.cz>
2017-10-16iso: Reduce verbosity on test and info callsAlexander Graf
The test and info callbacks into the partition callback struct are used by the "part list" command on the command line. That command is used by the distro script. With verb=1 set, "part list" thus throws a lot of warnings about partitions it can't find when an upper layer searches for partitions. So let's reduce verbosity to bring it to the same level of noise as the other partition targets. Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-16fixdep: fix dependency on options surrounded by CONFIG_VAL()Masahiro Yamada
CONFIG options surrounded by CONFIG_IS_ENABLED(...) CONFIG_IS_BUILTIN(...) CONFIG_IS_MODULE(...) CONFIG_VAL(...) need special care for proper dependency tracking. I do not remember why, but I missed to add CONFIG_VAL(...) handling. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-16tools: bmp_logo: correctly interpret BMP files with larger headersJon Smith
All BMP files were being treated as though they had a 40 byte header. There are several BMP header formats consisting of additional data. This was causing some of the header to be read as color information, skewing the color palette. Signed-off-by: Jon Smith <jtsmith@pdiarm.com>
2017-10-16common: Add a prototype for s_init()Diego Dorta
When compiling with W=1 the following warning is observed: arch/arm/mach-imx/mx6/soc.c:590:6: warning: no previous prototype for ‘s_init’ [-Wmissing-prototypes] void s_init(void) Remove this warning by adding the function prototype into include/common.h file. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-16tools/mkimage: Fix DTC run command to handle file names with spaceMirza, Taimoor
fit_handle_file function does not quote input and output files while preparing command to run DTC to convert .its to .itb. This results in a failure if input or output files contain spaces in their names. Quote input and output files in DTC command to avoid this failure. Signed-off-by: Mirza, Taimoor <Taimoor_Mirza@mentor.com>
2017-10-16fdt: update bcm283x device tree sources to Linux 4.14 stateAlexander Graf
Upstream Linux has received a few device tree updates to the RPi which we should propagate into the builtin U-Boot one as well to gain hardware support. This patch bumps the dts files to their 4.14 Linux counterparts with the exception of sdhost on 32bit RPi versions. There we stay with iproc as the sdhost driver is missing in U-Boot. Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-16part_efi: In is_gpt_valid() check argument validity before allocationTom Rini
While this goes somewhat against normal coding style we should ensure that dev_desc is not NULL before we dereference it in allocation of legacy_mbr. Reported-by: Coverity (CID: 167292) Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16SPL: FIT: Kconfig: Change SPL_FIT_IMAGE_POST_PROCESS entryext-vasily.gurevich@vaisala.com
Remove depends on TI_SECURE_DEVICE for other platforms. Signed-off-by: Vasily Gurevich <ext-vasily.gurevich@vaisala.com>
2017-10-15clk: uniphier: add NAND controller clockMasahiro Yamada
This allows the NAND driver to enable clock and get its clock rate. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15mtd: nand: denali_dt: add clock supportMasahiro Yamada
Enable clock in the probe hook. The clock rate will be necessary when setup_data_interface hook is supported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: uniphier: adjust ifdefs for new UniPhier DWC3 CONFIGMasahiro Yamada
Now USB 3.0 feature is enabled/disabled by CONFIG_USB_DWC3_UNIPHIER. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: uniphier: enable DWC3 xHCI driverMasahiro Yamada
Enable CONFIGs for the DWC3 core and the UniPhier specific glue layer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: uniphier: change the default of SoC select to UNIPHIER_V7_MULTIMasahiro Yamada
ARCH_UNIPHIER_V8_MULTI depends on !SPL, so the default may be hidden. Use a clearer default. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15reset: uniphier: fix the first argument passed to dev_err()Masahiro Yamada
priv->dev does not exist. Pass the correct pointer to udevice. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15clk: uniphier: add PXs3 clock dataMasahiro Yamada
Add basic clock data for Socionext's new SoC PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15clk: uniphier: rework for better clock tree structureMasahiro Yamada
U-Boot does not support fancy clock tree structures like the Linux common clock framework. Implement a simple clock tree model at the driver level. With this, the clock data will be simplified. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15i2c: uniphier-f: replace debug() with dev_dbg()Masahiro Yamada
Use dev_dbg() functions. It will be helpful to prefix log messages with the corresponding device name when the core framework is ready. While I am here, I renamed "dev", which was actually private data, into "priv" because dev->dev looks confusing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15i2c: uniphier: replace debug() with dev_dbg()Masahiro Yamada
Use dev_dbg() functions. It will be helpful to prefix log messages with the corresponding device name when the core framework is ready. While I am here, I renamed "dev", which was actually private data, into "priv" because dev->dev looks confusing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h>Masahiro Yamada
Including <common.h> pulls in a lot of bloat. What this driver needs is BIT(), so replace it with <linux/bitops.h> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marek Vasut <marex@denx.de>
2017-10-15ARM: uniphier: use pr_() instead of printf() where appropriateMasahiro Yamada
Replace printf() with pr_() to specify proper loglevel. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15pinctrl: uniphier: simplify input enable and delete pin arraysMasahiro Yamada
The pin data are implemented for old SoCs to specify the bit shift of the IECTRL register. They are not wortwhile given the required memory footprint. Delete all the pin data and enable all bits of the IECTRL register. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15pinctrl: uniphier: set PUPD_SIMPLE cap flag for PXs3Masahiro Yamada
Like other recenct UniPhier SoCs, the pupdctrl number of PXs3 matches to the pin number. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: dts: uniphier: update GPIO nodesMasahiro Yamada
Switch to the single node design. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15gpio: uniphier: rework single device node modelMasahiro Yamada
First, I implemented this driver as per-bank model, but it was a design mistake. - There are 31 banks in the maximum case. It is painful to add so many nodes to DT. - The IRQ control registers are shared between banks. Per-bank design is a problem for Linux. The counterpart for Linux turned around to the single node model. Rework based on the driver for Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v0.10.2 at 2024-07-03 23:01:22 (GMT)