summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-08s3c24xx: serial: Remove dead codeDavid Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08doc: Remove any reference to CONFIG_MODEM_SUPPORT, CONFIG_CMD_HWFLOW, ↵David Müller (ELSOFT AG)
CONFIG_HWFLOW and friends from the documentation. Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08Remove unused CONFIG_HWFLOW option and associated dead code.David Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08Remove unused CONFIG_CMD_HWFLOW option and associated dead code.David Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08Remove unused CONFIG_MODEM_SUPPORT option and associated dead code.David Müller (ELSOFT AG)
Signed-off-by: David Müller <d.mueller@elsoft.ch>
2016-02-08ARM: rpi: set fdt_high in the default environmentStephen Warren
The ARM Linux kernel requires the DT to be in memory accessible early during the boot process. This always happens naturally on the RPi 1, since the maximum memory size of 512MiB, and additionally some of that is reserved for use by the GPU. The RPi 2 has 1GiB of RAM (minus some GPU usage), and so if the DT is relocated to the top of RAM, Linux cannot access it. Prevent this from happening by setting fdt_high. Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-02-08ARM: rpi: update memory layout env. var. documentationStephen Warren
Update rpi-common.h's documentation that describes the rationale for choosing various addresses for standardized variables used by boot scripts. This comment was correct when written, but not updated when some of the values were changed. Fixes: 14006a567105 ("rpi: set fdt_addr_r to 0x00000100 to match default ...device_tree_address") Cc: Jonathan Liu <net147@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-02-08board_r: fix a typo in comment blockMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08kbuild: fix build rule of u-boot-spl.dtbMasahiro Yamada
The build command of u-boot-spl.dtb is not constant, but dependent on CONFIG_OF_SPL_REMOVE_PROPS. Use $(call if_changed,...) so that the change of CONFIG_OF_SPL_REMOVE_PROPS is detected. Also, add tools/fdtgrep to the dependency to make sure u-boot-spl.dtb is generated by the up-to-date fdtgrep in case the tool is modified. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08kbuild: add missing FORCE where $(call if_changed, ) is usedMasahiro Yamada
FORCE is needed for $(call if_changed,...) to be evaluated every time. Otherwise, the command is not executed when the command line has changed but any prerequisite has not been updated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08kbuild: remove unneeded ifdef conditionals around build rulesMasahiro Yamada
These rules are only used for SOCFPGA, SUNXI, but no need to hide them from other SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08image: fix getenv_bootm_size() function againMasahiro Yamada
Commit 9c11135ce053 ("image: fix getenv_bootm_size() function") fixed the case where "bootm_low" is defined, but "bootm_size" is not. Instead, it broke the case where neither "bootm_low" nor "bootm_size" is defined. Fix this function again. Fixes: 9c11135ce053 ("image: fix getenv_bootm_size() function") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Matthias Weisser <m.weisser.m@gmail.com> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2016-02-08test/py: support running sandbox under gdbserverStephen Warren
Implement command--line option --gdbserver COMM, which does two things: a) Run the sandbox process under gdbserver, using COMM as gdbserver's communication channel. b) Disables all timeouts, so that if U-Boot is halted under the debugger, tests don't fail. If the user gives up in the middle of a debugging session, they can simply CTRL-C the test script to abort it. This allows easy debugging of test failures without having to manually re-create the failure conditions. Usage is: Window 1: ./test/py/test.py --bd sandbox --gdbserver localhost:1234 Window 2: gdb ./build-sandbox/u-boot -ex 'target remote localhost:1234' When using this option, it likely makes sense to use pytest's -k option to limit the set of tests that are executed. Simply running U-Boot directly under gdb (rather than gdbserver) was also considered. However, this was rejected because: a) gdb's output would then be processed by the test script, and likely confuse it causing false failures. b) pytest by default hides stdout from tests, which would prevent the user from interacting with gdb. While gdb can be told to redirect the debugee's stdio to a separate PTY, this would appear to leave gdb's stdio directed at the test scripts and the debugee's stdio directed elsewhere, which is the opposite of the desired effect. Perhaps some complicated PTY muxing and process hierarchy could invert this. However, the current scheme is simple to implement and use, so it doesn't seem worth complicating matters. c) Using gdbserver allows arbitrary debuggers to be used, even those with a GUI. If the test scripts invoked the debugger themselves, they'd have to know how to execute arbitary applications. While the user could hide this all in a wrapper script, this feels like extra complication. An interesting future idea might be a --gdb-screen option, which could spawn both U-Boot and gdb separately, and spawn the screen into a newly created window under screen. Similar options could be envisaged for creating a new xterm/... too. --gdbserver currently only supports sandbox, and not real hardware. That's primarily because the test hooks are responsible for all aspects of hardware control, so there's nothing for the test scripts themselves can do to enable gdbserver on real hardware. We might consider introducing a separate --disable-timeouts option to support use of debuggers on real hardware, and having --gdbserver imply that option. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-08malloc: solve dead code issue in memalign()Stephen Warren
The recent change to memalign() caused the allocation failure detection code to be dead code; the "retry" logic is always activated under the same condition that the original failure detection code is, and also fully handles any possible failures. This patch solves the presence of dead code. Two alternatives are possible: a) Delete the now-dead test, and rely on the "retry" path to handle any allocation problems, as it does. b) Make the "retry" path fall through to the existing (currently dead) failure detection code, thus making it not-dead. (b) was chosen since it reduces the diff between U-Boot's and the upstream dlmalloc. This should make it marginally easier to import a new version of dlmalloc in the future. Reported by: Coverity Scan Fixes: 4f144a416469 ("malloc: work around some memalign fragmentation issues") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08api: Add FreeBSD API support for MIPS platformsStanislav Galabov
This patch adds U-Boot API support (used by FreeBSD loader) for MIPS platforms. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-02-08.travis.yml: explicitly request sudoStephen Warren
Without this, builds default to using new Travis CI infra-structure which does no allow sudo. The builds need sudo in order to install the ELDK compilers. Consequently, almost all builds fail without this. I suspect that existing Travis CI users have not noticed this because their accounts or builds have been grand-fathered into backwards- compatible default settings, whereas I just set up a new build from scratch and received new default settings. Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Heiko Schocher <hs@denx.de>
2016-02-08rpi: set ethaddr as wellLubomir Rintel
Let's set "ethaddr" when we get the ethernet address too, so that fdt_fixup_ethernet() sets the address in the device tree and the Linux driver can pick it up. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2016-02-08common/memsize.c: Simplify RAM size detectionEddy Petrișor
The case of memory of size 0 is not that different from a memory of any other size, so we remove the duplicate code and treat the small differences when it is the case. Signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>
2016-02-08defconfig: k2g_evm_defconfig: enable net driver modelMugunthan V N
enable net driver model for k2g evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08ARM: dts: k2g: Add keystone net dts filesMugunthan V N
Add keystone net DT support for k2g evm. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08defconfig: k2e_evm_defconfig: enable net driver modelMugunthan V N
enable net driver model for k2e evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08defconfig: k2l_evm_defconfig: enable net driver modelMugunthan V N
enable net driver model for k2l evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08defconfig: k2hk_evm_defconfig: enable net driver modelMugunthan V N
enable net driver model for k2hk evm as keystone_net supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08drivers: net: keystone_net: convert driver to adopt device driver modelMugunthan V N
Adopt keystone_net driver to adopt device driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETHMugunthan V N
When Micrel phy is selected without CONFIG_PHY_MICREL_KSZ9031 or CONFIG_PHY_MICREL_KSZ9021 there is a build error. Fixing this by adding proper ifdefs drivers/net/phy/micrel.c:370:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’: drivers/net/phy/micrel.c:377:23: error: array type has incomplete element type struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c:379:13: error: ‘ksz90x1_rxd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, ^ drivers/net/phy/micrel.c:379:13: note: each undeclared identifier is reported only once for each function it appears in drivers/net/phy/micrel.c:380:13: error: ‘ksz90x1_txd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, ^ drivers/net/phy/micrel.c:386:3: warning: implicit declaration of function ‘ksz90x1_of_config_group’ [-Wimplicit-function-declaration] ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); ^ drivers/net/phy/micrel.c:377:23: warning: unused variable ‘ofcfg’ [-Wunused-variable] struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c: At top level: drivers/net/phy/micrel.c:370:39: warning: ‘ksz9031_ctl_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: warning: ‘ksz9031_clk_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ scripts/Makefile.build:277: recipe for target 'drivers/net/phy/micrel.o' failed make[1]: *** [drivers/net/phy/micrel.o] Error 1 Makefile:1201: recipe for target 'drivers/net/phy' failed make: *** [drivers/net/phy] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08board: ti: ks2_evm: remove board_eth_init when CONFIG_DM_ETH is definedMugunthan V N
remove board_eth_init when CONFIG_DM_ETH is defined Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08OMAP3: omap3_logic: Remove YAFFS support.Adam Ford
UBIFS is the preferred FS, and YAFFS isn't officially included in Linux. Removing this feature reduces the code size. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08OMAP3: omap3_logic: Enable CONFIG_SMC911X_32_BITAdam Ford
The interface automatically converts one 32-bit word into two 16 words. The README said it is permissible to use this flag in that scenario. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08OMAP3: omap3_logic: Enable Android FastbootAdam Ford
Android Fastboot requires USB. The TWL4030 PMIC on omap3_logic handles USB traffic. This patch sets up the USB gadget and Android Fastboot to match what is done in the omap3_beagle project. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: Update on current serial driver statusSimon Glass
Update the README to reflect the current status. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-08dm: pxa: serial: Drop serial_sa1100 serial driverSimon Glass
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: serial: Drop serial_max3100 serial driverSimon Glass
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: freescale: serial: Drop serial_imx serial driverSimon Glass
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: opencores: Drop opencores_yanu serial driverSimon Glass
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08dm: freescale: Drop mxs_auart serial driverSimon Glass
This does not appear to be used, and has not been converted to driver model by the deadline (doc/driver-model/serial-howto.txt). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-08OMAP3_LOGIC: Setup defconfig to enable SPL and NAND bootingAdam Ford
The defconfig patch will enable the the SPL and NAND settings. The update to Kconfig will allow the SPL to configured in and built. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08OMAP3: Enable SPL on omap3_logicAdam Ford
Previously, Omap3_logic assumed X-loader was present. With this patch, we can finally replace X-loader with an MLO generated by U-Boot. This requires ECC to be setup to match the Linux Kernel and the PBIAS confgured for the SD card. Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08rpi: fix up Model B entriesLubomir Rintel
The P5 header was not present on "Model B" any board prior to Revision 2.0, there's no need for a separate device tree. Also, it looks like "rev2" is incorrectly used to only cover the 512MiB memory models; there also were 256MiB 2.0 boards. I don't have all of the boards to check this, I'm following this table: http://elinux.org/RPi_HardwareHistory#Board_Revision_History Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
2016-02-08rpi: link to another model number info sourceStephen Warren
This source has been blessed by Dom Cobley at the RPi Foundation, so seems like the best source to refer to. It's a superset of and consistent with the other sources. Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2016-02-08hush: Add rudimentary support for PS1 and PS2Marek Vasut
Add trivial support for changing the U-Boot command prompt string by setting PS1 and PS2 environment variables. Only static variables are supported. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08hush: Pull out U-Boot prompt display and read functionalityMarek Vasut
Pull the code which displays U-Boot prompt and reads the command line into a separate function. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08serial: serial_stm32: move clock config from driver to boardVikas Manocha
This patch removes the uart clock enable from serial driver & move it in the board code. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-08test, tools: introduce tbot READMEHeiko Schocher
introduce a README how to use tbot for testing U-Boot and/or linux kernels. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-02-08ARM: omap3_logic: Fix pin muxingAdam Ford
Enhance pin muxing to enable more board features and reduce power based on Tony's device tree work. Signed-off-by: Adam Ford <aford173@gmail.com>
2016-02-08tools: env: update usage stringsAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: factor out parse_common_argsAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: shift optind arguments and fix argument indicesAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: parse aes key / suppress flag into argument structAndreas Fenkart
disabled original parsing, but not yet removed since the argument indexing needs to be fixed Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: introduce setenv/printenv argument structsAndreas Fenkart
goal is to use getopt for all argument parsing instead of adhoc parsing in fw_getenv/fw_setenv functions Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
2016-02-08tools: env: make parse_aes_key statelessAndreas Fenkart
Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>