summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-06dm: rtc: Rename mktime() and reduce the number of parametersSimon Glass
Most callers unpack the structure and pass each member. It seems better to pass the whole structure instead, as with the C library. Also add an rtc_ prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-06dm: rtc: Rename to_tm() to rtc_to_tm() and add error codeSimon Glass
Rename this function so that it is clear that it is provided by the RTC. Also return an error when it cannot function as expected. This is unlikely to occur since it works for dates since 1752 and many RTCs do not support such old dates. Still it is better to be accurate. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-06dm: rtc: Rename gregorian day functionSimon Glass
Change this function name to something more descriptive. Also return a failure code if it cannot calculate a correct value. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-06fdt: Correct warning in fdt_setup_simplefb_node()Simon Glass
Adjust the printf() string to avoid a warning on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06dm: i2c: Add an explicit test mode to the sandbox I2C driverSimon Glass
At present this driver has a few test features. They are needed for running the driver model unit tests but are confusing and unnecessary if using sandbox at the command line. Add a flag to enable the test mode, and don't enable it by default. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06dm: i2c: Add functions to read and write a registerSimon Glass
Add driver model versions of the legacy functions to read and write a single byte register. These are a useful shortcut in many cases. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-06dm: i2c: sandbox: Add debugging to the speed limitSimon Glass
Print a debug() message with the I2C speed is exceeded. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-05-06dm: spi: Correct the comment on spi_get_ops()Simon Glass
This comment should refer to SPI, not serial. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-05-06cros_ec: Handle the single duplex requirement in cros_ecSimon Glass
With several chips using the SPI protocol it seems better to put the single duplex functionality in the EC rather than the SPI driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06cros_ec: Show the protocol version in the debug messageSimon Glass
When starting up, show the protocol version that has been negotiated with the EC. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06dm: spi: Avoid setting the speed with every transferSimon Glass
Only set the speed if it has changed from last time. Since the speed will be 0 when the device is probed it will always be changed on the first transfer after the device is probed. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-06test: dm: eth: Skip timeouts on ping testsJoe Hershberger
Indicate to the emulated sandbox Ethernet driver when we expect a timeout and tell it to leap forward. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-06sandbox: eth: Add a function to skip ping timeoutsJoe Hershberger
When called, the next call to receive will trigger a 10-second leap forward in time to avoid waiting for time to pass when tests are evaluating timeout behavior. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-06sandbox: Add test function to advance timeJoe Hershberger
Add a function that maintains an offset to include in the system timer values returned from the lib/time.c APIs. This will allow timeouts to be skipped instantly in tests Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05Prepare v2015.07-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-05-05fw_env.h: include autoconf.hMax Krummenacher
Without this, when CONFIG_ENV_VARS_UBOOT_CONFIG is active we get a compile time error when doing 'make env'. In file included from tools/env/fw_env.c:117:0: include/env_default.h:110:11: error: expected ‘}’ before ‘CONFIG_SYS_ARCH’ When building U-Boot this is included indirectly by the compiler switch -include /home/trdx/git.toradex.com/u-boot-2014.10-toradex/include/linux/kconfig.h Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-05-05Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2015-05-05Merge git://git.denx.de/u-boot-marvellTom Rini
2015-05-05arm: mvebu: Remove "u-boot.kwb" CONFIG_BUILD_TARGET for non-SPL targetsStefan Roese
By removing this default build target, the "u-boot.kwb" target is not automatically generated. This fixes a temporary build error when using out-of-tree builds, as buildman does per default (reported by Simon). When the full SPL support is added for these targets with the DDR training code, the "u-boot-spl.kwb" image will be generated automatically. Users providing a special bin_hdr binary (binary.0) file can always add this binary file and generate the full firmware image by issuing the "make u-boot.kwb" command directly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-05-05arm: mvebu: db-mv784mp-gp: Fix ECC I2C addressStefan Roese
The macro to select the I2C address for ECC bus-width detection was defined incorrectly for the Marvell DB-MV784MP-GP board. This patch changes the macro to the correct value to fix this issue. Signed-off-by: Stefan Roese <sr@denx.de>
2015-05-05arm: mvebu: Add Armada A38x DB-88F6820-GP board supportStefan Roese
This patch adds support for the Marvell DB-88F6820-GP Armada A38x evaluation board. Supported peripherals are: - UART - Ethernet (mvneta) - I2C - SPI (including SPI NOR flash) Please note that this board support right now only supports the main U-Boot. Without the bin_hdr integration (DDR training etc). This will be added in a few days / weeks to complete this board port. But till then this U-Boot version can be run on the target via the original Marvell U-Boot via this command: tftpboot 4000000 db-88f6820-gp/u-boot.bin;go 4000000 Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: Add d-cache invalidate before enabling the d-cacheStefan Roese
This solves some RX problems that have been seen, when using the mvneta ethernet driver. The cache needs to be reset into a "clean" state before using it. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: mv-common.h: Add CONFIG_PREBOOTStefan Roese
This enables the usage of the "preboot" environment variable on Marvell boards. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: Remove coherency configurationStefan Roese
We are not using the coherency feature in U-Boot at all. So lets remove this configuration from the mbus driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: Change network init code to allow a more flexible setupStefan Roese
With the introduction of the Armada 38x support, its necessary to change the mvneta ethernet driver init call from always 4 times to a configurable value. Lets make this init call more flexible by moving the actually used devices to the config header. Additionally this patch takes care of the slightly different base addresses for the ethernet controllers on A38x. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-05arm: mvebu: Add basic Armada 38x supportStefan Roese
This patch adds support for the Marvell Armada 38x SoC family. Supported peripherals are: - UART - Ethernet (mvneta) - I2C - SPI (including SPI NOR flash) Tested on Marvell DB-88F6820-GP evaluation board. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common headerStefan Roese
This way, new MVEBU boards don't need to specifiy the common location for the SPL linker script. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: Only define MV88F78X60 for Armada XPStefan Roese
This define is used by the DDR training code for Armada XP. With the upcoming addition of Armada 38x support, lets only define it for Armada XP in this common header. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: Remove unreferenced defineStefan Roese
MAX_MVNETA_DEVS is not used anywhere in U-Boot. So lets remove it. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: Change header macros from ARMADA_XP to MVEBUStefan Roese
Since these files will be used for other MVEBU SoC's, lets reflect this in the headers marcos as well. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: mvebu: Move mvebu-common into mach-mvebuStefan Roese
Now that the mach-mvebu directory exists and is used by Armada XP we can move the mvebu-common files into this directory as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: armada-xp: Move SoC headers to mach-mvebu/include/machStefan Roese
Move arch/arm/include/asm/arch-armada-xp/* -> arch/arm/mach-mvebu/include/mach/* Additionally the SYS_SOC is renamed from "armada-xp" to "mvebu". With this change all these files can better be shared with other, newer Mavell MVEBU SoC's. Like the upcoming Armada 38x support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05arm: armada-xp: Move SoC sources to mach-mvebuStefan Roese
Move arch/arm/cpu/armv7armada-xp/* -> arch/arm/mach-mvebu/* Since this platform will be extended to support other Marvell SoC's as well, lets rename it directly to mvebu. This will be used by the upcoming Armada 38x suport (A38x). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>
2015-05-05Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini
2015-05-05Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2015-05-05ARM: mmc: bcm283x: Remove get_timer_us() from mmc driverMarek Vasut
The get_timer_us() function is something which is no longer existing in case we use generic timer framework, so replace it with get_timer(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tyler Baker <tyler.baker@linaro.org>
2015-05-05tegra: mmc: Set the removable flag correctlySimon Glass
If the mmc device is non-removable (as indicated by the device tree), set the flag so that users of the device know. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-05mmc: bcm2835_sdhci: Use calloc to allocate bcm2835_sdhci_hostAlexander Stein
We need to clear the allocated memory explicitly as the included struct sdhci_host has function pointers. Those are compared to NULL to test if this (optional) feature is supported. Leaving them undefined let u-boot jump to arbitrary memory. Signed-off-by: Alexander Stein <alexanders83@web.de>
2015-05-05mmc: fsl_esdhc: update eMMC44 adapter card erase timeoutYangbo Lu
Freescale eMMC44 adapter card uses Micron N2M400FDB311A3CF eMMC memory. According to the silicon datasheet, secure erase timeout is 600ms. So increase erase timeout value from 250ms to 600ms. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com>
2015-05-05mmc: sdhci: add timeout setting for response busy commandKevin Liu
Timeout interrupt also work for response busy command(R1b) like cmd38/cmd6. So need to set it accordingly. Current code only set timeout for data command. Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2015-05-05mmc: remove the MMC_MODE_HC flagRob Herring
High capacity support is not a host capability, but a device capability that is queried via the OCR. The flag in the operating conditions request argument can just be set unconditionally. This matches the Linux implementation. [panto] Hand merged and renumbering MMC_MODE_DDR_52MHz. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
2015-05-05mmc: Fix splitting device initializationAndrew Gabbasov
Starting part of device initialization sets the init_in_progress flag only if the MMC card did not yet come to ready state and needs to continue polling. If the card is SD or if the MMC card became ready quickly, the flag is not set and (if using pre-initialization) the starting phase will be re-executed from mmc_init function. Set the init_in_progress flag in all non-error cases. Also, move flags setting statements around so that the flags are not set in error paths. Also, IN_PROGRESS return status becomes unnecessary, so get rid of it. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05mmc: Restructure polling loops to avoid extra delaysAndrew Gabbasov
The polling loops in sd_send_op_cond and mmc_complete_op_cond functions check the ready flag state at the end of the loop, that is after executing a delay inside the loop, which, in case of exiting with no error, is not needed. Also, one of these loops, as well as the loop in mmc_send_status, have the delay just before exiting on timeout conditions. Restructure all these loops to check the respective conditions before making a delay for the next loop pass, and to appropriately exit without the delay. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05mmc: Continue polling MMC card for OCR only if it is still not readyAndrew Gabbasov
Some MMC cards come to ready state quite quickly, so that the respective flag appears to be set in mmc_send_op_cond already. In this case trying to continue polling the card with CMD1 in mmc_complete_op_cond is incorrect and may lead to unpredictable results. So check the flag before polling and skip it appropriately. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05mmc: Do not pass external mmc_cmd structure to mmc_send_op_cond_iter()Andrew Gabbasov
The previous change to use 'ocr' structure field for storing send_op_cond command response also stopped using command response directly outside of mmc_send_op_cond_iter(). Now it becomes possible to use command structure in mmc_send_op_cond_iter() locally, removing a necessity to pass it as an argument from the caller. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05mmc: Avoid extra duplicate entry in mmc device structureAndrew Gabbasov
The 'op_cond_response' field in mmc structure contains the response from the last SEND_OP_COND MMC command while making iterational polling of the card. Later it is copied to 'ocr' field, designed to contain the OCR register value, which is actually the same response from the same command. So, these fields have actually the same data, just in different time periods. It's easier to use the same 'ocr' field in both cases at once, without temporary using of the 'op_cond_response' field. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05mmc: Fix typo in MMC type checking macroAndrew Gabbasov
The version flag constant name used in IS_MMC macro is incorrect/undefined. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
2015-05-05Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD
2015-05-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2015-05-04powerpc/mpc85xx: Add board support for ucp1020Oleksandr G Zhadan
New QorIQ p1020 based board support from Arcturus Networks Inc. http://www.arcturusnetworks.com/products/ucp1020/ Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com> [York Sun: remove patman tags from commit message] Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v0.10.2 at 2024-11-10 02:08:25 (GMT)