summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-17Merge branch 'master' of http://git.denx.de/u-boot-mmcTom Rini
2016-11-17Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2016-11-17 Highlights this time around: - x86 efi_loader support - hello world efi test case - network device name is now representative - terminal output reports modes correctly - fix psci reset for ls1043/ls1046 - fix efi_add_runtime_mmio definition for x86 - efi_loader support for ls2080
2016-11-17ls2080ardb: Convert to distro bootAlexander Graf
Most new systems in U-Boot these days make use of the generic "distro" framework which allows a user to have U-Boot scan for a bootable OS on all available media types. This patch extends the LS2080ARDB board to use that framework if the hard coded NOR flash location does not contain a bootable image. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17armv8: fsl-layerscape: Add support for efi_loader RTS resetAlexander Graf
When implementing efi loader support, we can expose runtime services for payloads. One such service is CPU reset. This patch implements RTS CPU reset support for layerscape systems. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-17armv8: ls2080a: Declare spin tables as reserved for efi loaderAlexander Graf
The efi loader code has its own memory map, so it needs to be aware where the spin tables are located, to ensure that no code writes into those regions. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17ls2080ardb: Reserve DP-DDR RAMAlexander Graf
The DP-DDR shouldn't be exposed as conventional memory to an OS, so let's rather claim it's a reserved region in the EFI memory map Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-17ls2080: Exit dpaa only right before exiting U-BootAlexander Graf
On ls2080 we have a separate network fabric component which we need to shut down before we enter Linux (or any other OS). Along with that also comes configuration of the fabric using a description file. Today we always stop and configure the fabric in the boot script and (again) exit it on device tree generation. This works ok for the normal booti case, but with bootefi the payload we're running may still want to access the network. So let's add a new fsl_mc command that defers configuration and stopping the hardware to when we actually exit U-Boot, so that we can still use the fabric from an EFI payload. For existing boot scripts, nothing should change with this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com> [agraf: Fix x86 build]
2016-11-17efi_loader: Fix efi_add_runtime_mmio definitionAlexander Graf
The efi_add_runtime_mmio prototype for disabled CONFIG_EFI_LOADER was different from the enabled one. Sync them. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17efi_loader: Disable PSCI reset for ls1043 and ls1046Alexander Graf
The NXP ls1043 and ls1046 systems do not (yet) have PSCI enablement for reset. Don't enable generic PSCI reset code on them. Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-17efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3Alexander Graf
Some boards decided not to run ATF or other secure firmware in EL3, so they instead run U-Boot there. The uEFI spec doesn't know what EL3 is though - it only knows about EL2 and EL1. So if we see that we're running in EL3, let's get into EL2 to make payloads happy. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
2016-11-16sunxi: sina33: Enable the LCDMaxime Ripard
The SinA33 comes with an optional 7" display. Enable it in the configuration. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2016-11-16sunxi: sina33: Enable the eMMCMaxime Ripard
The SinA33 has an 4GB Toshiba eMMC connected to the MMC2 controller. Enable it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2016-11-16mmc: sunxi: Enable 8bits bus width for sun8iMaxime Ripard
The sun8i SoCs also have a 8 bits capable MMC2 controller. Enable the support for those too. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2016-11-16mmc: Retry the switch commandMaxime Ripard
Some eMMC will fail at the first switch, but would succeed in a subsequent one. Make sure we try several times to cover those cases. The number of retries (and the behaviour) is currently what is being used in Linux. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-15ARM64: zynqmp: Adding prefetchable memory space to pcieBharat Kumar Gogada
Adding prefetchable memory space to pcie device tree node. Shifting configuration space to 64-bit address space. Removing pcie device tree node from amba as it requires size-cells=<2> in order to access 64-bit address space. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add clocks for LPDDMAKedareswara rao Appana
Zynqmp DMA driver expects two clocks (main clock and apb clock) For LPDDMA channels the two clocks are missing in the Dma node resulting probe failure. xilinx-zynqmp-dma ffa80000.dma: main clock not found. xilinx-zynqmp-dma ffa80000.dma: Probing channel failed xilinx-zynqmp-dma: probe of ffa80000.dma failed with error -2 This patch fixes this issue. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add description for LPDDMA channel usageKedareswara rao Appana
LPDDMA default allows only secured access. inorder to enable these dma channels, one should ensure that it allows non secure access. This patch updates the same. Reported-by: Sai Pavan Boddu <saipava@xilinx.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Use 64bit size cell format for main amba busMichal Simek
Use 64bit size cell for main amba bus instead of 32bit because PCIe node requires it Change 64bit sizes also for all others IPs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add ocm node in dtsiNaga Sureshkumar Relli
This patch adds ocm controller node in zynqmp.dtsi. needed for OCM edac support. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add device tree properties for ZynqMP GT coreAnurag Kumar Vulisha
This patch adds the ZynqMP GT core device-tree properties for zynqmp.dtsi file. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Tested-by: Hyun Kwon <hyunk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15Revert "ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes"Michal Simek
This reverts commit bd750e7a6c515c081b72d4ef108a2bfa691a3fd1 Implemented the new workaround for auto tuning based on zynqmp compatible string, so removed the 'broken-tuning' property. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: change sdhci compatible string.Sai Krishna Potthuri
This patch changes the compatible string for sdhci node, adds "xlnx,device_id" and "xlnx,mio_bank" property to sdhci node. Signed-off-by: Sai Krishna Potthuri <lakshmis@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: List all SMMU idsMichal Simek
Add SMMU description for all tested IPs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add support for zynqmp fpga managerNava kishore Manne
Add support for zynqmp fpga manager. Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add cortexa53 edac nodeNaga Sureshkumar Relli
This patch adds edac node for arm cortexa53 to report errors on L1 and L2 caches. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15Revert "ARM64: zynqmp: Add serdes address space dp driver"Michal Simek
This reverts commit 786db82bd5bf09cc8f78c8b14445e843d7566b1c. Since we are using serdes driver , no need of mapping serdes register space into DP driver. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Tested-by: Hyun Kwon <hyunk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: drm: Add DMA indexHyun Kwon
Each plane can be associated with multiple DMA channels. So add index for each DMA channel. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Sync gpio node propertiesMichal Simek
Keep dtsi in sync with mainline kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Remove xlnx,id propertyMichal Simek
Remove unused xlnx,id property because it is not the part of DT binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: pci: Updating device tree as per upstreamBharat Kumar Gogada
Updating required device tree changes as per mainlined driver from 4.6 kernel. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Support for multiple PM IDs assigned to a PM domainFilip Drazic
Previously, it was assumed that there is a 1:1 mapping between PM ID defined in the platform firmware and a PM domain. However, there can be a situation where multiple PM IDs belong to a single PM domain (e.g. PM IDs for GPU and two pixel processors correspond to a single PM domain). This patch adds support for assigning more than one PM ID to a single PM domain. Updated documentation accordingly. Assigned pixel processors PM IDs to GPU PM domain. Signed-off-by: Filip Drazic <filip.drazic@aggios.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: DT: Add PM domains for GPU and PCIEFilip Drazic
Signed-off-by: Filip Drazic <filip.drazic@aggios.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: DT: Remove unused PM domains for PLLFilip Drazic
Signed-off-by: Filip Drazic <filip.drazic@aggios.com> Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: DT: Remove unused DDR PM domainFilip Drazic
DDR power states are handled by the PM firmware, so this domain is redundant. Also, since there is no device using this PM domain, it will be powered off during boot, which is wrong. Signed-off-by: Filip Drazic <filip.drazic@aggios.com> Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Remove note about level shifter on zcu102Michal Simek
i2c device is just level shifter. Remove reference from dts. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add dcc port to dtsiMichal Simek
Add dcc to dtsi for supporting system without serial port. DCC is enabled by default on ZynqMP. Adding dcc to zcu100 and zcu102 which were tested. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add gpio-keys for zcu102Michal Simek
There is gpio push button on MIO22. Add it to DTS to have full board description. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Enable gpio-led as heartbeat on zcu102Michal Simek
Show user that Linux is alive on the board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Enable can1 for ep108Naga Sureshkumar Relli
This patch enables can1 for ep108. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Added clocks to DT for ep108VNSL Durga
Added clks for ep108 platform. Signed-off-by: VNSL Durga <vnsldurg@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add clocks for LPDDMAKedareswara rao Appana
Zynqmp DMA driver expects two clocks (main clock and apb clock) LPDDMA clock cofiguration is missing for the same in the zynqmp-clk.dtsi file. This patch updates for the same. Reported-by: Sai Pavan Boddu <saipava@xilinx.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Remove DTC 1.4.2 warningsMichal Simek
DTC 1.4.2 reports these warnings: Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /amba has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /amba/usb@fe200000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/usb@fe300000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-video0channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-video1channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-video2channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-graphicschannel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-audio0channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-audio1channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name This patch is fixing them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM: zynq: Remove DTC 1.4.2 warningsMichal Simek
DTC 1.4.2 reports these warnings: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /pmu has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property This patch is fixing them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Correct the sdhci minimum frequency for ep108Siva Durga Prasad Paladugu
Correct the sdhci minimum frequency for ep platform. It should be right shift instead of left shift operand. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Ignore warnings from autogenerated filesMichal Simek
Autogenerated files contain casting issues and missing function declaration and even usleep implementation. Suppress them for now till these files are fixed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Fix secondary bootmode enablingMichal Simek
Do not setup use_alt bit which copy alternative boot mode to boot mode. The reason is that this bit is cleared after POR but not after any software reset which will cause that after SW reset bootrom will look for different boot image. This patch setups alternative boot mode selection (purely SW handling) and extends code to read this alternative boot mode first and use it if it is setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Add support for SD1 with level shifters bootmodeSiva Durga Prasad Paladugu
Add support for SD1 with level shifters bootmode. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Record board name as serial number for DFU/FASTBOOTMichal Simek
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Adjust to new SMC interface to get silicon versionSoren Brinkmann
The new FW interface returns the IDCODE and version register, leaving extracting bitfields to the caller. Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM: zynq: Add support for Zynq 7000S 7007s/7012s/7014s devicesMichal Simek
Zynq 7000S (Single A9 core) devices is using different ID code. This patch adds this new codes and assign them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v0.10.2 at 2024-11-17 10:41:08 (GMT)