u-boot - NXP/Freescale LSDK U-boot tree with Scalys patches

Age	Commit message (Expand)	Author
2012-09-01	gpio: add gpio api support to mx27 (v4)	trem
2012-09-01	mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'	Otavio Salvador
2012-09-01	mxs: Only build internal Ethernet controller for i.MX28	Otavio Salvador
2012-09-01	MX28: config: Allow different target generation in elftosb call	Otavio Salvador
2012-09-01	mx25: Enable dcache	Benoît Thébaudeau
2012-09-01	MX28: Shuffle around the power management code	Marek Vasut
2012-09-01	MX28: Drop the cp15 reconfiguration from SPL	Marek Vasut
2012-09-01	mxs: Convert sys_proto.h prefixes to 'mxs'	Otavio Salvador
2012-09-01	mxs: Remove not required include of iomux-mx28.h	Otavio Salvador
2012-09-01	mxs: Remove not required explicit iomux-mx28.h include	Otavio Salvador
2012-09-01	davinci, c6x: Always use C version of reset code	Tom Rini
2012-09-01	da8xx/hawkboard: Add support for ohci host controller	Sughosh Ganu
2012-09-01	i.MX28: bug fixes in PMU configuration code	Stathis Voukelatos
2012-09-01	MX28: Move the u-boot.bd info CPUDIR/SOCDIR	Marek Vasut
2012-09-01	mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs	Otavio Salvador
2012-09-01	mxs: Clarify why we poweroff in case of brownout in 5v conflict	Otavio Salvador
2012-09-01	mxs: Reowork SPL to use 'mxs' prefix for methods	Otavio Salvador
2012-09-01	mxs: prefix register structs with 'mxs' prefix	Otavio Salvador
2012-09-01	mxs: prefix register acessor macros with 'mxs' prefix	Otavio Salvador
2012-09-01	mxs: reorganize source directory for easy sharing of code in i.MXS SoCs	Otavio Salvador
2012-09-01	MX28: use a clear name for DDR2 initialization	Otavio Salvador
2012-09-01	MX28: extend print_cpuinfo() to use chip information	Otavio Salvador
2012-09-01	Enable the EMAC clock in at91_macb_hw_init().	Markus Hubig
2012-09-01	arm : Atmel : add at91sam9x5ek board support	Bo Shen
2012-09-01	DaVinci DA8xx: fix set_cpu_clk_info()	Laurence Withers
2012-09-01	DaVinci DA8xx: replace magic number for DDR speed	Laurence Withers
2012-09-01	arm/davinci/da850: add uart0 pinmux	Mikhail Kshevetskiy
2012-09-01	arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138	Mikhail Kshevetskiy
2012-09-01	da850/omap-l138: Add support to read u-boot image from MMC/SD	Lad, Prabhakar
2012-09-01	arm, davinci: perform check for initializing global data and serial init	Lad, Prabhakar
2012-09-01	da850/omap-l138: Add MMC support for DA850/OMAP-L138	Lad, Prabhakar
2012-09-01	Consolidate bootcount code into drivers/bootcount	Stefan Roese
2012-07-07	ARM: mx28: Remove CONFIG_ARCH_CPU_INIT	Fabio Estevam
2012-07-07	SPL: ARM: spear: Add SPL support for SPEAr600 platform	Stefan Roese
2012-07-07	SPEAr: explicitly select clk src for UART	Shiraz Hashim
2012-07-07	SPEAr: Add basic arch related support for SPEAr SoCs	Vipin KUMAR
2012-07-07	kirkwood: add save functionality kirkwood_mpp_conf function	Valentin Longchamp
2012-07-07	i.MX28: Add function to adjust memory parameters	Marek Vasut
2012-07-07	DaVinci: fix ddr2 vtp i/o calibration	Troy Kisky
2012-05-15	i.MX28: Avoid redefining serial_put[cs]()	Marek Vasut
2012-05-15	i.MX28: Add battery boot components to SPL	Marek Vasut
2012-05-15	i.MX28: Reorder battery status functions in SPL	Marek Vasut
2012-05-15	i.MX28: Add LRADC init to i.MX28 SPL	Marek Vasut
2012-05-15	i.MX28: Shut down the LCD controller before reset	Marek Vasut
2012-05-15	i.MX28: Implement boot pads sampling and reporting	Marek Vasut
2012-05-15	i.MX28: Improve passing of data from SPL to U-Boot	Marek Vasut
2012-05-15	i.MX28: Add delay after CPU bypass is cleared	Marek Vasut
2012-05-15	imx: Add u-boot.imx as target for ARM9 i.MX SOCs	Timo Ketola
2012-05-15	i.MX25: esdhc: Add mxc_get_clock infrastructure	Timo Ketola
2012-05-15	Revert "i.MX28: Enable additional DRAM address bits"	Marek Vasut