summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv8
AgeCommit message (Collapse)Author
2017-06-05arm64: Add NOLOAD attribute NOLOAD to .bss sectionsMichal Simek
Mark explicitly bss sections to not be loaded at run time. The similar patch was done in past by: "Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections" (sha1: 64134f011254123618798ff77c42ba196b2ec485) The problem is related to latest toolchain added to Xilinx v2017.1 design tools where jtag loader is trying to access ununitialized memory. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-05ARMv8: Add support for poweroff via PSCIMichal Simek
Add support for calling poweroff in case of psci is wired. Based on the same solution as is used for reset. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move all logic in to fwcall.c as other ARMs implement poweroff via PMIC] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05common: freescale: Move arch-specific declarationsSimon Glass
The declarations should not be in common.h. Move them to the arch-specific headers. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup thinko defined(FSL_LSCH3) -> defined(CONFIG_FSL_LSCH3)] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-03Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-06-02armv8: layerscape: Enabling loading PPA during SPL stageYork Sun
Loading PPA in SPL puts the rest of U-Boot (including RAM version loaded later) in EL2 with MMU and cache enabled. Once PPA is loaded, PSCI is available. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-02armv8: layerscape: Make U-Boot EL2 safeYork Sun
When U-Boot boots from EL2, skip some lowlevel init code requiring EL3, including CCI-400/CCN-504, trust zone, GIC, etc. These initialization tasks are carried out before U-Boot runs. This applies to the RAM version image used for SPL boot if PPA is loaded first. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-02armv8: ls2080aqds: Add support for SD bootSantan Kumar
Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-02armv8: ls2080a: Reorganise NAND_BOOT code in config flagSantan Kumar
Add CONFIG_NAND_BOOT config flag to organise NAND_BOOT specific code in config flag like -nand-boot specfic errata errata_rcw_src() -CONFIG_SYS_NAND_U_BOOT_DST,etc Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-01fdt: Rename a few functions in fdt_supportSimon Glass
These two functions have an of_ prefix which conflicts with naming used in of_addr. Rename them: fdt_read_number fdt_support_bus_default_count_cells Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-26Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-05-23armv8: ls2080ardb, ls2080aqds: Adjust memory map for NOR-bootSantan Kumar
This patch adjusts memory map for images on LS2080ARDB and LS2080AQDS NOR flash as below Image Flash Offset RCW+PBI 0x00000000 Boot firmware (U-Boot) 0x00100000 Boot firmware Environment 0x00300000 PPA firmware 0x00400000 PHY firmware 0x00980000 DPAA2 MC 0x00A00000 DPAA2 DPL 0x00D00000 DPAA2 DPC 0x00E00000 Kernel.itb 0x01000000 Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-23armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1043AAlison Wang
This patch is to adjust the memory mapping for FLash/SD card on LS1043AQDS and LS1043ARDB, such as PPA firmware load address, FMAN firmware load address, QE firmware load address, U-Boot start address on serial flash and environment address. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-23armv8: ls2080ardb: Add LS2081ARDB board supportPriyanka Jain
LS2081ARDB board is similar to LS2080ARDB board with few differences It hosts LS2081A SoC Default boot source is QSPI-boot It does not have IFC interface RTC and QSPI flash device are different It provides QIXIS access via I2C Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-23armv8: fsl-layerscape: Add NXP LS2081A, LS2041A SoC supportPriyanka Jain
The QorIQ LS2081A SoC has eight 64-bit ARM v8 Cortex A72 cores and is built on layerscape architecture. It is 40-pin derivative of LS2084A (non-AIOP personality of LS2088A). So feature-wise it is same as LS2084A. LS2041A is a 4-core personality of LS2081A. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-23armv8: ls2080ardb: Add QSPI-boot supportPriyanka Jain
QSPI-boot is supported on LS2088ARDB RevF board with LS2088A SoC. LS2088ARDB RevF Board has limitation that QIXIS can not be accessed. CONFIG_FSL_QIXIS is not enabled. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-15armv8: minor fix to comment for enabling SMPEN bitDinh Nguyen
The SMPEN bit is located in the cpuectlr_el1 register and not the cpuactlr_el1 register. Adjust the comment accordingly and also fix a spelling error. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> CC: Mingkai Hu <mingkai.hu@nxp.com> CC: Gong Qianyu <Qianyu.Gong@nxp.com> CC: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> CC: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> CC: York Sun <york.sun@nxp.com> CC: Albert Aribaud <albert.u.boot@aribaud.net> CC: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-12arm: Support cache invalidateSimon Glass
At present there is not operation to invalidate a cache range. This seems to be needed to fill out the cache operations. Add an implementation based on the flush operation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2017-05-12arm: Correct signature for get_ticks()Simon Glass
This should be uint64_t to match its definition in common.h. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-24arm: psci: make psci usable on single core socsYuantian Tang
PSCI can be used on both multiple and single core socs. Current implementation only allows PSCI to work on multiple core socs. This patch removes this restriction so that PSCI can work on single core socs as well. Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-24armv8: fsl-layerscape: Add validation of PPA image from NAND and SDSumit Garg
Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-24armv8: fsl-layerscape: Support loading PPA header from eMMC/SD and NAND FlashSumit Garg
Add Kconfig option to support loading PPA header from eMMC/SD and NAND Flash. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-18Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-04-18ARM: adjust arm-smccc code for use in U-BootMasahiro Yamada
Adjust ARM SMC Calling Convention code for U-Boot: - Replace the license block with SPDX - Change path to asm-offsets.h - Define UNWIND() as no-op - Add Kconfig entry - Add asm-offsets Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-18ARM: import arm-smccc code from Linux 4.11-rc6Masahiro Yamada
Imports ARM SMC Calling Convention code from Linux 4.11-rc6. The files have been copied as follows: [Linux] [U-Boot] arch/arm/kernel/smccc-call.S -> arch/arm/cpu/armv7/smccc-call.S arch/arm64/kernel/smccc-call.S -> arch/arm/cpu/armv8/smccc-call.S arch/arm/include/asm/opcodes* -> arch/arm/include/asm/opcodes* include/linux/arm-smccc.h -> include/linux/arm-smccc.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-17armv8/fsl-layerscape: fdt: avoid incorrect fixing with CONFIG_SYS_CLK_FREQYangbo Lu
Current sysclk fixing would fix all clocks with 'fixed-clock' compatible. This patch is to fix sysclk by path to avoid any incorrect fixing. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: fsl-lsch3: Instantiate TZASC configuration in 2 groupsAshish kumar
Number of TZASC instances may vary across NXP SoCs. So put TZASC configuration under instance specific defines. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: ls2080a: Add serdes2 protocol 0x51 supportSantan Kumar
Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-17arm64/ls1046a: Enable ERRATUM_A008850 for ls1046a SoCShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: ls1043a: Drop macro CONFIG_LS1043AYork Sun
Use CONFIG_ARCH_LS1043A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: ls2080a: Drop macro CONFIG_LS2080AYork Sun
Use CONFIG_ARCH_LS2080A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2017-04-17arm: ls1043ardb: Add SD secure boot targetRuchika Gupta
- Add SD secure boot target for ls1043ardb. - Implement FSL_LSCH2 specific spl_board_init() to setup CAAM stream ID and corresponding stream ID in SMMU. - Change the u-boot size defined by a macro for copying the main U-Boot by SPL to also include the u-boot Secure Boot header size as header is appended to u-boot image. So header will also be copied from SD to DDR. - CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM (128K) where 32K are reserved for use by boot ROM and 6K for secure boto header. - Error messages during SPL boot are limited to error code numbers instead of strings to reduce the size of SPL image. Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: SECURE_BOOT: Enable chain of trust on LS1012A platformVinitha Pillai-B57223
Define bootscript and its header addresses for QSPI target Also add PPA header address in Kconfig Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-17armv8: SECURE_BOOT: Enable chain of trust on LS1046A platformVinitha Pillai-B57223
Define bootscript and its header addresses for QSPI target. Also define PPA header address to enable PPA validation. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-04-17armv8: fsl-layerscape: SECURE BOOT: Add header address of PPA in kconfigVinitha Pillai-B57223
The header address of PPA defined in Kconfig. Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-04-12arm: freescale: Rename initdram() to fsl_initdram()Simon Glass
This function name shadows a global name but is in fact different. This is very confusing. Rename it to help with the following refactoring. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-08spl: Kconfig: SPL_MMC_SUPPORT depends on GENERIC_MMCAlexandru Gagniuc
spl_mmc.c calls mmc_initialize(). This symbol is provided in drivers/mmc/mmc.c when CONFIG_GENERIC_MMC is enabled. The sunxi Kconfig case is an oddball because it redefines SPL_MMC_SUPPORT. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> [trini: Update arch/arm/cpu/armv8/zynqmp/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-05board_f: Drop setup_dram_config() wrapperSimon Glass
By making dram_init_banksize() return an error code we can drop the wrapper. Adjust this and clean up all implementations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05board_f: Drop return value from initdram()Simon Glass
At present we cannot use this function as an init sequence call without a wrapper, since it returns the RAM size. Adjust it to set the RAM size in global_data instead, and return 0 on success. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2017-04-05board_f: Drop board_type parameter from initdram()Simon Glass
It looks like only cm5200 and tqm8xx use this feature, so we don't really need it in generic code. Drop it and have the users access gd->board_type directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2017-03-28armv8: Kconfig: fsl-ppa: support load PPA from eMMC/SD and NAND FlashHou Zhiqiang
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-28fsl: PPA: add support PPA image loading from NAND and SDHou Zhiqiang
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-28armv8/fsl-layerscape: fdt: Skip checking USB clock on LS1012AYingxi Yu
USB requires 100MHz clock. On LS1012A, a dedicated 100MHz is provided instead of SYSCLK (125MHz). Skipping checking SYSCLK for FDT fixup. Signed-off-by: Yingxi Yu <yingxi.yu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-28board: freescale: ls2080a/ls2088a: Enable PPASantan Kumar
Enable PPA on LS2080A, LS2088A boards: -LS2080ARDB, LS2080AQDS -LS2088ARDB, LS2088AQDS Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-28pci: layerscape: add LS2088A series SoC pcie supportHou Zhiqiang
The LS2088A series SoCs has different physical memory map address and CCSR registers address against LS2080A series SoCs. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-28armv8: fsl-lsch3: Conditionally apply workaround for erratum a0009203Ashish kumar
This i2c errata only applies to LS2080A and its variants, namely LS2080A, LS2085A and LS2088A. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-28armv8:fsl-layerscape: Avoid RCWSR28 register hard-codingPrabhakar Kushwaha
SerDes information is not necessary to be present in RCWSR29 register. It may vary from SoC to SoC. So Avoid RCWSR28 register hard-coding. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-28arm: fsl-layerscape: Move QSGMII wriop_init to SoC filePrabhakar Kushwaha
MAC number used per QSGMII is not fixed. It may wary from SoC to SoC. So move QSGMII wriop_init_dpmac() to SoC file. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-28armv8/fsl-layerscape: Update erratum A009635 implementationPriyanka Jain
Erratum A009635 is valid only for LS2080A SoC and its personality. Add SoC svr check. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-14armv8: fsl-lsch2: add workaround for erratum A-010635Tang Yuantian
Read DMA operations causes CRC error on armv8 chassis 2 platforms due to the erratum A-010635. In order to support sata on these platforms, ECC needs to be disabled. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-03-14armv8: layerscape: Update early MMU for DDR after initializationYork Sun
In early MMU table, DDR has to be mapped as device memory to avoid speculative access. After DDR is initialized, it needs to be updated to normal memory to allow code execution. To simplify the code, dram_init() is moved into a common file as a weak function. Signed-off-by: York Sun <york.sun@nxp.com>
generated by cgit v0.10.2 at 2024-08-18 03:38:39 (GMT)