summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2018-04-09LSDK-18.03 Grapeboard initial supportJoris van Vossen
2018-01-12board: ls1012a: LS1012A-2G5RDB board supportBhaskar Upadhaya
LS1012A-2G5RDB belongs to LS1012A family with features 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
2018-01-12armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088Ashish Kumar
IFC-NOR and QSPI-NOR pins are muxed on SoC,so they cannot be accessed simultaneously, but IFC-NOR can be accessed along with SD-BOOT. ls1088aqds_sdcard_ifc_defconfig: is defconfig for SD as boot source and IFC-NOR to be used as flash, this will be used to write IFC-NOR image on IFC flash. QSPI and DSPI cannot be accessed in this defconfig. IFC-NOR image is generated by ls1088aqds_defconfig. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2018-01-09armv8: ls1012a: Add USB 2.0 controller phy type for ls1012aqds boardRan Wang
Without this propertiy, U-Boot will pop warning of 'USB phy type not defined' when select CONFIG_HAS_FSL_DR_USB. Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2017-11-12ARM: rmobile: Fix eMMC signal voltage on Salvator-X/XSMarek Vasut
The eMMC is 1V8 device only and the signaling is always 1V8, fix the DT for Salvator-X/XS to describe the hardware correctly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-09Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2017-11-09imx:display5: Add support for LWN's DISPLAY5 boardLukasz Majewski
This commit provides support for LWN's IMX6Q based DISPLAY5 board. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-07rockchip: dts: rk3399: change sd-card io voltage to 3.0VKlaus Goger
The VCC_SD and VCC_SDIO rail should only be powered up to 3.0V on RK3399 platforms. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07rockchip: dts: Use defines for pin names in rk3399-puma.dtsi and rk3368-lion.dtsKlaus Goger
pinctrl/rockchip.h provides defines that map pin numbers to pin names. Use them to make the dts more human readable. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07rockchip: dts: rk3399-puma: update USB configurationPhilipp Tomsich
This change updates the USB configuration for the RK3399-Q7 in the DTS: * fixes the OTG board configuration by enabling it ('okay') * improves the speed of 'usb start' by disabling the unused EHCI/OHCI controllers Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-11-07rockchip: dts: rk3399-puma: update usbhub_enable regulatorPhilipp Tomsich
To correctly model the usbhub_enable regulator for U-Boot, we need to change the settings to: * the GPIO polarity is GPIO_ACTIVE_LOW * should be set to inactive (enable-active-low) when boot-on settings are applied * it can be changed at runtime (i.e. remove the always-on) Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-11-07rockchip: dts: rk3399-puma: fix the modelling of BIOS_DISABLEPhilipp Tomsich
The fixed regulator for overriding BIOS_DISABLE had been modelling backwards (i.e. the GPIO polarity and the enable-active-low/high property had both been inverted), causing the 'regulator' command to always print/expect 'disabled'/'enabled' backwards. This fixes the mix-up and models it correctly: * the GPIO is low-active * the regulator should be enabled (enable-active-high) during boot-on initialisation Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-11-06ARM: dts: exynos: fix property values of LDO15/17 for ODROID-XU3/4Dongjin Kim
Looking at the schematic, LDO15 and LDO17 are tied as a power source of a builtin network chipset. The voltage on LDO15 is corrected to 3.3V and the name of LDO17 is corrected to "vdd_ldo17". Signed-off-by: Dongjin Kim <tobetter@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-10-28Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-10-27armv8: ls1088ardb: Enable USB command RDB qspi-bootRan Wang
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-25sunxi: binman: Add U-Boot binary size checkMaxime Ripard
The U-Boot binary may trip over its actual allocated size in the storage. In such a case, the environment will not be readable anymore (because corrupted when the new image was flashed), and any attempt at using saveenv to reconstruct the environment will result in a corrupted U-Boot binary. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-25sunxi: Add support for the Banana Pi M2-MagicMaxime Ripard
The Banana Pi M2-Magic is a small board with an Allwinner A33, an eMMC, a wifi chip and some pin headers. Enable support for it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-22ARM: dts: uniphier: sync DT with Linux 4.14-rc5Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-22ARM: uniphier: split u-boot,dm-pre-reloc out to uniphier-v7-u-boot.dtsiMasahiro Yamada
UniPhier 32-bit SoCs use CONFIG_SPL_OF_CONTROL. So, many nodes must be marked as dm-pre-reloc to prevent fdtgrep from stripping them off. Sprinkling U-Boot-specific properties all over the place is painful because DT files are synced with Linux from time to time. Split u-boot,dm-pre-reloc out to uniphier-v7-u-boot.dtsi, which is appended to UniPhier V7 DTS before the build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-10-16fdt: update bcm283x device tree sources to Linux 4.14 stateAlexander Graf
Upstream Linux has received a few device tree updates to the RPi which we should propagate into the builtin U-Boot one as well to gain hardware support. This patch bumps the dts files to their 4.14 Linux counterparts with the exception of sdhost on 32bit RPi versions. There we stay with iproc as the sdhost driver is missing in U-Boot. Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-15ARM: dts: uniphier: update GPIO nodesMasahiro Yamada
Switch to the single node design. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-11Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
2017-10-09ARM: rmobile: dts: Add SDR104/HS200 to Salvator-XMarek Vasut
Add DT nodes to enable SDR104/HS200 modes on Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-09Merge git://git.denx.de/u-boot-videoTom Rini
2017-10-08ARM: DTS: stm32: add SDMMC support fo stm32h743-evalPatrice Chotard
Add pinctrl and sdmmc nodes to add MMC support for STM32H743 evaluation board. Evaluation board needs a second pinctrl node "pinctrl_sdmmc1_level_shifter" to drive a level shifter on MMC bus. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08ARM: DTS: stm32: add SDMMC support for stm32h743 discoPatrice Chotard
Add pinctrl and sdmmc nodes to add MMC support for STM32H743 discovery board. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08serial: stm32x7: remove stm32f7-usart and stm32h7-usart compatiblePatrice Chotard
This patch remove the extra compatibility string "st,stm32h7-usart" and "st,stm32f7-usart" to avoid confusion, save some time & space. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-10-03sun7i: a20: Add Bananapi M1 Plus supportJagan Teki
Banana Pi M1 Plus is an open-source single-board computer that adds more connectivity to the classic board using Allwinner A20 SOC. Bananapi M1-Plus features: - A20 Dual-core 1.0GHz - 1 GB DDR3 SDRAM - MicroSD - 10/100/1000 Ethernet RJ45 - WiFi b/g/n - 5V DC Micro USB power-supply For dts file, Sync with Linux commit f92ca09("Merge branch 'akpm/master'"). Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-10-03sunxi: rename Bananapi M3 dts file nameChen-Yu Tsai
The upstream (Linux) device tree file for the Bananapi M3 follows the convention of using the well known brand name, instead of the vendor name, for naming. The file was recently added to upstream in commit 359b5a1e1c2d ("ARM: sun8i: a83t: Add device tree for Sinovoip Bananapi BPI-M3") Rename the device tree file in U-boot to match. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sunxi: Add support for A20-OLinuXino-MICRO-eMMCStefan Mavrodiev
From rev.J A20-OLinuXino-MICRO has eMMC option. For now this is only 4GB, but in the future size may increase. The dts file is the same from mainline kernel. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-03sunxi: sina33: Sync the device tree with the kernelMaxime Ripard
The kernel DT of the SinA33 has evolved quite a bit. Make sure we sync it and its upstream DTSI to be able to use the OTG. The DTs were taken from the 4.13 kernel release. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-30rockchip: rk3399-puma: add boot-on regulator to override BIOS_DISABLEPhilipp Tomsich
The (Qseven) BIOS_DISABLE signal on the RK3399-Q7 (Puma) keeps the eMMC and SPI in reset initially and we need to write a GPIO to turn them on before continuing the boot-up. This adds the DTS entries for the additional regulator and makes pinctrl and gpio3 available during SPL. It also adds a hook to the spl_board_init() to ensure that the regulator gets probed and enabled. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-30rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-orderPhilipp Tomsich
In the general case, we want to continue booting the full U-Boot (contained in a discoverable FIT image) from the same device the SPL stage was loaded from. This prepends the 'same-as-spl' specifier to our configurable boot-order to make this the default behaviour. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-30rockchip: dts: rk3328-evb: add i2c1 and rk805 nodesElaine Zhang
add i2c1 and rk805 nodes to support rk805 init setting. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-30rockchip: dts: rk3229: remove dram channel infoKever Yang
The dram channel info will be auto detect by the driver, we do not need it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2017-09-30rockchip: dts: Enable SARADC for rk3399-evbDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-30rockchip: dts: Enable SARADC for rk3368-sheepDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-30rockchip: dts: Enable SARADC for rk3368-px5-evbDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-30rockchip: dts: Enable SARADC for rk3328-evbDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-30rockchip: dts: Enable SARADC for rk3288-popmetalDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-30rockchip: dts: Enable SARADC for rv1108-evbDavid Wu
Enable the SARADC for download key pressed detect. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-30rockchip: dts: rv1108: Add SARADC node at dtsi levelDavid Wu
Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-09-29arm: dts: omap3: sync DTS with Linux 4.14-rc1Karthik Tummala
This re-syncs omap3 DTS file with current file from Linux v4.14-rc1 to ensure a consistent configuration. Upstream Linux removed the redundant Interrupt-parent property from usbhsohci, usbhsehci, ssi_port1 and ssi_port2 sub nodes. Signed-off-by: Karthik Tummala <karthik@techveda.org>
2017-09-29ARM: dts: OMAP5+: Enable all gpios in SPLLokesh Vutla
With DM enabled, gpio numbering is assigned based on the probed order of gpios, irrespective of the gpio base. So enable all necessary gpios in SPL. Fixes: edf25d94d55c (“ARM: dts: OMAP5+: Enable gpio in SPL”) Reported-by: Gou, Hongmei <h-gou@ti.com> Tested-by: Aparna Balasubramanian <aparnab@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-09-29arm: dts: am3517_evm: Sync DTS files with Linux 4.13-RC5Adam Ford
To keep the DTS and DTSI files clean and in sync with Linux, new u-boot.dtsi files are added. There are some spacing issues in the patch, but they appear to be present in the Linux source files. I'll try to get to fixing them there, and do a future re-sync at a later date. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2017-09-29ARM: da850-evm: Enable DM_I2CAdam Ford
With DM now enabled with the device tree pulled from Linux, we can enable DM_I2C in U-Boot. Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add DM_I2C_COMPAT to da850_am18xxevm to fix warning] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-29board: sama5d4_xplained: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29board: sama5d4ek: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29board: sama5d3xek: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-29board: sama5d2_xplained: Convert to CONFIG_DM_VIDEOWenyou Yang
Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v0.10.2 at 2024-08-01 11:24:13 (GMT)