summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2017-11-07rockchip: dts: rk3399-puma: update usbhub_enable regulatorPhilipp Tomsich
To correctly model the usbhub_enable regulator for U-Boot, we need to change the settings to: * the GPIO polarity is GPIO_ACTIVE_LOW * should be set to inactive (enable-active-low) when boot-on settings are applied * it can be changed at runtime (i.e. remove the always-on) Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-11-07rockchip: dts: rk3399-puma: fix the modelling of BIOS_DISABLEPhilipp Tomsich
The fixed regulator for overriding BIOS_DISABLE had been modelling backwards (i.e. the GPIO polarity and the enable-active-low/high property had both been inverted), causing the 'regulator' command to always print/expect 'disabled'/'enabled' backwards. This fixes the mix-up and models it correctly: * the GPIO is low-active * the regulator should be enabled (enable-active-high) during boot-on initialisation Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-11-06cosmetic: rmobile: renesas spelled wrongChris Brandt
Renesas was spelled wrong. Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
2017-11-06spear: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for SPEAR related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06stv0991: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for STV0991 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06stm32: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for STM32 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06sti: fix STMicroelectronics copyrightPatrice Chotard
Uniformize all STMicroelectronics copyrights headers for STi related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06ARM: dts: exynos: fix property values of LDO15/17 for ODROID-XU3/4Dongjin Kim
Looking at the schematic, LDO15 and LDO17 are tied as a power source of a builtin network chipset. The voltage on LDO15 is corrected to 3.3V and the name of LDO17 is corrected to "vdd_ldo17". Signed-off-by: Dongjin Kim <tobetter@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-11-01rockchip: rk3328: fix rockchip_get_cru apiKever Yang
The API for get priv pointer is wrong, fix it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-31wandboard: Add support for the MX6QP variantFabio Estevam
Add support for the latest MX6QP wandboard variant. Based on Richard Hu's work from Technexion's U-Boot tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-29Merge git://git.denx.de/u-boot-videoTom Rini
2017-10-28Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-10-27armv8: sec_firmware: Add support for loadables in FITSumit Garg
Enable support for loadables in SEC firmware FIT image. Currently support is added for single loadable image. Brief description of implementation: Add two more address pointers (loadable_h, loadable_l) as arguments to sec_firmware_init() api. Create new api: sec_firmware_checks_copy_loadable() to check if loadables node is present in SEC firmware FIT image. If present, verify loadable image and copies it to secure DDR memory. Populate address pointers with secure DDR memory addresses where loadable is copied. Example use-case could be trusted OS (tee.bin) as loadables node in SEC firmware FIT image. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27armv8: layerscape: Allocate 66 MB DDR for secure memorySumit Garg
Change DDR allocated for secure memory from 2 MB to 66 MB. This additional 64 MB secure memory is required for trusted OS running in Trusted Execution Environment using ARMv8 TrustZone. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27armv8: ls1088ardb: Enable USB command RDB qspi-bootRan Wang
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to KconfigRan Wang
Use Kconfig to select QE-HDLC and USB pin-mux. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27sunxi: video: add LCD support to DE2 driverVasily Khoruzhick
Extend DE2 driver with LCD support. Tested on Pinebook which is based on A64 and has ANX6345 eDP bridge with eDP panel connected to it. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> [agust: rebased v5 on u-boot-video/master] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-27sunxi: video: split out PLL configuration codeVasily Khoruzhick
It will be reused in new DM LCD driver. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2017-10-26sunxi: setup simplefb for Allwinner DE2Icenowy Zheng
As the support of EFI boot on Allwinner H3 is broken, we still need to use simplefb to pass the framebuffer to Linux. Add code to setup simplefb for Allwinner DE2 driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-26video: add an option for video simplefb via DTIcenowy Zheng
Add an option to indicate that the video driver should setup a SimpleFB node that passes the video framebuffer initialized by U-Boot to the operating system kernel. Currently only the Allwinner DE driver uses this option, and the definition of this option in the sunxi-common.h config header is converted to an imply of this option from CONFIG_VIDEO_SUNXI. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-26sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXIIcenowy Zheng
The sunxi DE1 video option used to be CONFIG_VIDEO, which has the same name as the "Enable legacy video support" option in drivers/video/Kconfig. Change the option name to CONFIG_VIDEO_SUNXI, which is really used by Makefile under drivers/video/sunxi/, and defined in sunxi-common.h when CONFIG_VIDEO is selected before this change. Now CONFIG_VIDEO_SUNXI selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig and config headers are all converted to use CONFIG_VIDEO_SUNXI. Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2017-10-25sunxi: binman: Add U-Boot binary size checkMaxime Ripard
The U-Boot binary may trip over its actual allocated size in the storage. In such a case, the environment will not be readable anymore (because corrupted when the new image was flashed), and any attempt at using saveenv to reconstruct the environment will result in a corrupted U-Boot binary. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-25sunxi: Enable THUMB build for the U-Boot binaryMaxime Ripard
We start to get to the limit of our main U-Boot binary size (with some boards even crossing it). Enable its build using thumb2 to get some extra room. Suggested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-25sunxi: Add support for the Banana Pi M2-MagicMaxime Ripard
The Banana Pi M2-Magic is a small board with an Allwinner A33, an eMMC, a wifi chip and some pin headers. Enable support for it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-25sunxi: clk: fix N formula for CPUX clocksQuentin Schulz
As explained in arch/arm/mach-sunxi/clock_sun8i_a83t.c, clk for CPU clusters is computed as clk = 24*n. However, the current formula is clk = 24*(n-1). This results in a clock set to a frequency that isn't specified as possible for CPUs. Let's use the correct formula. Fixes: f542948b1e8c ("sunxi: clk: add basic clocks for A83T") Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-10-22ARM: uniphier: use pr_*() more where appropriateMasahiro Yamada
Commit dd74b945af2e ("ARM: uniphier: use pr_() instead of printf() where appropriate"), but I missed to update this file for some reason. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-22ARM: dts: uniphier: sync DT with Linux 4.14-rc5Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-22ARM: uniphier: split u-boot,dm-pre-reloc out to uniphier-v7-u-boot.dtsiMasahiro Yamada
UniPhier 32-bit SoCs use CONFIG_SPL_OF_CONTROL. So, many nodes must be marked as dm-pre-reloc to prevent fdtgrep from stripping them off. Sprinkling U-Boot-specific properties all over the place is painful because DT files are synced with Linux from time to time. Split u-boot,dm-pre-reloc out to uniphier-v7-u-boot.dtsi, which is appended to UniPhier V7 DTS before the build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-10-22ARM: uniphier: remove CONFIG_UNIPHIER_ETHMasahiro Yamada
The option is never enabled by anyone. Remove the code surrounded by its ifdef. This should be handled by the clock/reset drivers. CONFIG_UNIPHIER_ETH in scripts/config_whitelist.txt will be dropped by the next resync. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-20Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16arm: dra76: fastboot: extend cpu type for getvar commandPraneeth Bajjuri
'commit fa24eca1f20a ("omap: Add routine for setting fastboot variables")' adds initial support and usage of "fastboot getvar" command for DRA75x and DRA72x devices. and 'commit 0f9e6aee9dbc ("arm: dra76: Add support for ES1.0 detection")' adds initial dra76 device definition This patch is to extend usage of "fastboot getvar" for DRA76 device. Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-16omap-common: fastboot: extend cpu type for DRA71x rev 2.1Vishal Mahaveer
DRA71x processors are reduced pin and software compatible derivative of DRA72 processors. Extend support for this revision in "getvar cpu" command. Signed-off-by: Vishal Mahaveer <vishalm@ti.com> [praneeth@ti.com: rebase to u-boot master] Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-10-16Drop CONFIG_HAS_DATAFLASHTuomas Tynkkynen
Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-16fdt: update bcm283x device tree sources to Linux 4.14 stateAlexander Graf
Upstream Linux has received a few device tree updates to the RPi which we should propagate into the builtin U-Boot one as well to gain hardware support. This patch bumps the dts files to their 4.14 Linux counterparts with the exception of sdhost on 32bit RPi versions. There we stay with iproc as the sdhost driver is missing in U-Boot. Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-15ARM: uniphier: adjust ifdefs for new UniPhier DWC3 CONFIGMasahiro Yamada
Now USB 3.0 feature is enabled/disabled by CONFIG_USB_DWC3_UNIPHIER. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: uniphier: change the default of SoC select to UNIPHIER_V7_MULTIMasahiro Yamada
ARCH_UNIPHIER_V8_MULTI depends on !SPL, so the default may be hidden. Use a clearer default. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: uniphier: use pr_() instead of printf() where appropriateMasahiro Yamada
Replace printf() with pr_() to specify proper loglevel. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-15ARM: dts: uniphier: update GPIO nodesMasahiro Yamada
Switch to the single node design. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-10-12ARM: imx6: Add DHCOM i.MX6 PDK board supportMarek Vasut
Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-12mx6: sys_proto: Add prototypes for imx6_pcie_toggle() functionsDiego Dorta
When compiling with W=1 errors are observed: drivers/pci/pcie_imx.c:517:12: warning: no previous prototype for ‘imx6_pcie_toggle_power’ [-Wmissing-prototypes] __weak int imx6_pcie_toggle_power(void) drivers/pci/pcie_imx.c:528:12: warning: no previous prototype for ‘imx6_pcie_toggle_reset’ [-Wmissing-prototypes] __weak int imx6_pcie_toggle_reset(void) Remove these warnings by adding the functions prototypes on arch-mx6/sys_proto. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12mx6: clock: Add a prototype for do_mx6_showclocks()Diego Dorta
When compiling with W=1 the following warning is observed: arch/arm/mach-imx/mx6/clock.c:1268:5: warning: no previous prototype for ‘do_mx6_showclocks’ [-Wmissing-prototypes] int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) Remove this warning by adding the function prototype into arch-mx6/clock.h file. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12arm: imx7d: add support for Compulab cl-som-imx7Ilya Ledvich
Add initial support for Compulab cl-som-imx7 SoM. The initial support includes: - MMC - eMMC - SPI flash - I2C - FEC - USB - Serial console Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
2017-10-12imx: mx7: SPL support for i.MX7Uri Mashiach
Add configuration file and spl_boot_device function for the i.MX7 SPL. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12imx: mx7: DDR controller configuration for the i.MX7 architectureUri Mashiach
The configuration files imximage.cfg are used for the DDR controller configuration. Add DDR configuration function to replace the DDR controller configuration in the imximage.cfg file. The function can be used for DDR size detection. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2017-10-12imx: mx7: fix the CCM_ macrosUri Mashiach
The CCM_ macros use the CCM_BASE_ADDRESS macro, which doesn't exist. Replace the CCM_BASE_ADDRESS macros with CCM_BASE_ADDR. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2017-10-12mx6: soc: Include <asm/bootm.h> header fileDiego Dorta
When compiling with W=1 the following warning is observed: arch/arm/mach-imx/mx6/soc.c:213:12: warning: no previous prototype for ‘get_board_rev’ [-Wmissing-prototypes] u32 __weak get_board_rev(void) Fix the build warning by including <asm/bootm.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-10-12imx: sys_proto: Add a prototype for board_mmc_get_env_dev()Diego Dorta
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:266:5: warning: no previous prototype for ‘board_mmc_get_env_dev’ [-Wmissing-prototypes] int board_mmc_get_env_dev(int devno) Remove this warning by adding the function prototype into sys_proto.h file. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12imx6: disable clock command and print_cpuinfo code in SPLAnatolij Gustschin
We do not use print_cpuinfo and clock command code in SPL, disable it when building SPL image. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-10-11Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
generated by cgit v0.10.2 at 2024-08-07 08:21:31 (GMT)