summaryrefslogtreecommitdiff
path: root/arch/x86/dts
AgeCommit message (Collapse)Author
2016-08-16x86: Add theadorable-x86-dfi-bt700 board supportStefan Roese
This patch adds support for the BayTrail based theadorable-x86-dfi-bt700 board which uses the DFI BT700 BayTrail Qseven SoM on a custom baseboard. The main difference to the DFI baseboard is, that it isn't equipped with a Super IO chip and uses the internal HS SIO UART (memory mapped PCI based) as the console UART. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16x86: Add DFI BT700 BayTrail board supportStefan Roese
This patch adds support for the DFI BayTrail BT700 QSeven SoM installed on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton NCT6102D Super IO chip providing the UART as console. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config codeStefan Roese
This patch includes the following changes: - Remove Designware I2C support from dts as its not used - Configure SMBus PADs in dts - Enable I2C commands and I2C support - Configure SMSC2513 USB hub via SMBus upon startup - Move environment location to match Minnowmax example - Enhancement of the default environment Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-08-16x86: som-db5800-som-6867: fix SERIRQ on resetGeorge McCollister
Explicitly enable ILB_SERIRQ function 1 in cfio_regs_pad_ilb_serirq_PCONF0. Pad configuration for SERIRQ is not set to enable the SERIRQ function after a reset though strangely, it is on initial boot. Rebooting from Linux, reset command in u-boot and even pushing the reset button on the development board all lead to the SERIRQ function being disabled (address 0xfed0c560 with value of 0x2003cc80). Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-07-12x86: Add Advantech SOM-DB5800/SOM-6867 supportGeorge McCollister
Add support for Advantech SOM-DB5800 with the SOM-6867 installed. This is very similar to conga-qeval20-qa3-e3845 in that there is a reference carrier board (SOM-DB5800) with a Baytrail based SoM (SOM-6867) installed. Currently supported: - 2x UART (From ITE EC on SOM-6867) routed to COM3/4 connectors on SOM-DB5800. - 4x USB 2.0 (EHCI) - Video - SATA - Ethernet - PCIe - Realtek ALC892 HD Audio Pad configuration for HDA_RSTB, HDA_SYNC, HDA_CLK, HDA_SDO HDA_SDI0 is set in DT to enable HD Audio codec. Pin defaults for codec pin complexs are not changed. Not supported: - Winbond Super I/O (Must be disabled with jumpers on SOM-DB8500) - USB 3.0 (XHCI) - TPM Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-06-12x86: baytrail: Configure card detect pin of the SD controllerBin Meng
As of today, the latest version FSP (gold4) for BayTrail misses the PAD configuration of the SD controller's Card Detect signal. The default PAD value for the CD pin sets the pin to work in GPIO mode, which causes card detect status cannot be reflected by the Present State register in the SD controller (bit 16 & bit 18 are always zero). Add a configuration for this pin in the pinctrl node. Note I've checked the PAD configuration for all the pins in all the 3 controllers (eMMC/SDIO/SD). Only this SDMMC3_CD_B pin does not get initialized to correct mode by FSP. With fsp,emmc-boot-mode set to 2 (eMMC 4.1), eMMC pins are initialized to func 1, but if we set fsp,emmc-boot-mode to 1 (auto), those pins are initialized to func 3 which is correct according to datasheet. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12x86: baytrail: Change fsp, emmc-boot-mode to "auto"Bin Meng
At present all BayTrail boards configure fsp,emmc-boot-mode to 2, which means "eMMC 4.1" per FSP documentation. However, eMMC 4.1 only shows up on some early stepping silicon of BayTrail SoC. Newer stepping SoC integrates an eMMC 4.5 controller. Intel FSP provides a config option fsp,emmc-boot-mode which tells FSP which eMMC controller it initializes. Instead of hardcoded to 2, now we change it to 1 which means "auto". With this change, MinnowMax board (with a D0 stepping BayTrail SoC) can see the eMMC 4.5 controller at PCI address 00.17.00 via U-Boot 'pci' command. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12x86: baytrail: Add 'reg' property in the pinctrl nodeBin Meng
Without a 'reg' property, pinctrl driver probe routine fails in its pre_probe() with a return value of -EINVAL. Add 'reg' property for all BayTrail boards. Note for BayleyBay, the pinctrl node is newly added. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23x86: galileo: Enable CPU driverBin Meng
Add a cpu node in the device tree and enable CPU driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23x86: Use latest microcode for all BayTrail boardsBin Meng
Update board device tree to include latest microcode, and remove the old no longer needed microcode. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2016-05-23x86: baytrail: Update to latest microcodeBin Meng
Update BayTrail microcde to rev 325 (for CPUID 30673), rev 907 (for CPUID 30679). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-23x86: dts: Update to include ACTL register detailsBin Meng
This updates all x86 boards that currently have IRQ router in the dts files to include ACTL register details. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-17x86: Add congatec conga-QA3/E3845-4G (Bay Trail) supportStefan Roese
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, installed on the congatec Qseven 2.0 evaluation carrier board (conga-QEVAL). Its port is very similar to the MinnowboardMAX port and also uses the Intel FSP as described in doc/README.x86. Currently supported are the following interfaces / devices: - UART (via Winbond legacy SuperIO chip on carrier board) - Ethernet (PCIe Intel I210 / E1000) - SPI including SPI NOR as boot-device - USB 2.0 - SATA via U-Boot SCSI IF - eMMC - Video (HDMI output @ 800x600) - PCIe Not supported yet is: - I2C - USB 3.0 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17x86: Add support for the samus chromebookSimon Glass
This adds basic support for chromebook_samus. This is the 2015 Pixel and is based on an Intel broadwell platform. Supported so far are: - Serial - SPI flash - SDRAM init (with MRC cache) - SATA - Video (on the internal LCD panel) - Keyboard Various less-visible drivers are provided to make the above work (e.g. PCH, power control and LPC). The platform requires various binary blobs which are documented in the README. The major missing feature is USB3 since the existing U-Boot support does not work correctly with Intel XHCI controllers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17x86: dts: Drop memory SPD compatible stringSimon Glass
This is not needed now that the memory controller driver has the SPD data in its own node. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17x86: link: Add pin configuration to the device treeSimon Glass
At present pin configuration on link does not use the standard mechanism, but some rather ugly custom code. As a first step to resolving this, add the pin configuration to the device tree. Four of the GPIOs must be available before relocation (for SDRAM pin strapping). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17x86: broadwell: Add a few microcode filesSimon Glass
Add two microcode files for broadwell. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17x86: dts: link: Add board ID GPIOsSimon Glass
At present the board ID GPIOs are hard-coded. Move them to the device tree so that we can use general SDRAM init code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17x86: dts: link: Move SPD info into the memory controllerSimon Glass
The SDRAM SPD (Serial Presence Detect) information should be contained with the SDRAM controller. This makes it easier for the controller to access it and removes the need for a separate compatible string. As a first step, move the information. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17x86: link: Add required GPIO propertiesSimon Glass
In order to use GPIO phandles we need to add some GPIO properties as specified by the GPIO bindings. Add these for link. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-21x86: Add Intel Cougar Canyon 2 boardBin Meng
This adds basic support to Intel Cougar Canyon 2 board, a board based on Chief River platform with an Ivy Bridge processor and a Panther Point chipset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: minnowmax: Drop io-base property in the pch_pinctrl nodeBin Meng
IOBASE is now obtained from PCH driver, drop this <io-base> property. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05x86: ich6_gpio: Convert to use proper DM APIBin Meng
At present this GPIO driver still uses the legacy PCI API. Now that we have proper PCH drivers we can use those to obtain the information we need. While the device tree has nodes for the GPIO peripheral it is not in the right place. It should be on the PCI bus as a sub-peripheral of the PCH device. Update the device tree files to show the GPIO controller within the PCH, so that PCI access works as expected. This also adds '#address-cells' and '#size-cells' to the PCH node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2016-02-05spi: ich: Use compatible strings to distinguish controller versionBin Meng
At present ich spi driver gets the controller version information via pch, but this can be simply retrieved via spi node's compatible string. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> Tested-by: Simon Glass <sjg@chromium.org>
2016-01-28x86: Correct spi node aliasBin Meng
With recent changes spi node was moved to a place as a subnode under pch, so update the alias to refer to its correct place as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-24x86: ivybridge: Use syscon for the GMA deviceSimon Glass
Until we have a proper video uclass we can use syscon to handle the GMA device, and avoid the special device tree and PCI searching. Update the code to work this way. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Drop special EHCI initSimon Glass
This is not needed. On reset wake-on-disconnect is already set. It may a problem during a soft reset or resume, but for now it does not seem important. Also drop the command register update since PCI auto-config does it for us. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Convert SDRAM init to use driver modelSimon Glass
SDRAM init needs access to the Northbridge controller and the Intel Management Engine device. Add the latter to the device tree and convert all of this code to driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Use the I2C driver to perform SMbus initSimon Glass
Move the init code into the I2C driver. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Drop the special PCI driverSimon Glass
There is nothing special about the ivybridge pci driver now, so just use the generic one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Do the SATA init before relocationSimon Glass
The SATA device needs to set itself up so that it appears correctly on the PCI bus. The easiest way to do this is to set it up to probe before relocation. This can do the early setup. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Use common CPU init codeSimon Glass
The existing ivybridge code predates the normal multi-core CPU init, and it is not used. Remove it and add CPU nodes to the device tree so that all four CPUs are set up. Also enable the 'cpu' command. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Add a driver for the bd82x6x northbridgeSimon Glass
Add a driver with an empty probe function where we can move init code in follow-on patches. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Move lpc_early_init() to probe()Simon Glass
Move this code to the LPC's probe() method so that it will happen automatically when the LPC is probed before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Set up the LPC device using driver modelSimon Glass
Find the LPC device in arch_cpu_init_dm() as a first step to converting this code to use driver model. Probing the LPC will probe its parent (the PCH) automatically, so make sure that probing the PCH does nothing before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: queensbay: Add an interrupt driverSimon Glass
Add a driver for interrupts on queensbay and move the code currently in cpu_irq_init() into its probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: quark: Add an interrupt driverSimon Glass
Add a driver for interrupts on quark and move the code currently in cpu_irq_init() into its probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: spi: Convert ICH SPI driver to driver model PCI APISimon Glass
At present this SPI driver works by searching the PCI buses for its peripheral. It also uses the legacy PCI API. In addition the driver has code to determine the type of Intel PCH that is used (version 7 or version 9). Now that we have proper PCH drivers we can use those to obtain the information we need. While the device tree has a node for the SPI peripheral it is not in the right place. It should be on the PCI bus as a sub-peripheral of the LPC device. Update the device tree files to show the SPI controller within the PCH, so that PCI access works as expected. This patch includes Bin's fix-up patch from here: https://patchwork.ozlabs.org/patch/569478/ Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13x86: qemu: remove cpu node in device treeMiao Yan
Remove 'cpu' node in device tree for QEMU targets, and let U-Boot detect and fix up those information at runtime. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13x86: qemu: add a cpu uclass driver for qemu targetMiao Yan
Add a cpu uclass driver for qemu. Previously, the qemu target gets cpu number from board dts files, which are manually created at compile time. This does not scale when more cpus are assigned to guest as the dts files must be modified as well. This patch adds a cpu uclass driver for qemu targets to directly read online cpu number from firmware. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13x86: ivybridge: Add microcode blobs for all the steppingsBin Meng
This adds microcode blobs created from Intel FSP package for the Chief River platform. They are for all the Ivy Bridge steppings: 306a2 (B0), 306a4 (C0), 306a5 (K0/M0), 306a8 (E0/L0), except the 306a9 which is already in the U-Boot tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09x86: Fix PCI UART compatible string for crownbay and galileoBin Meng
With recent ns16550 driver changes, we only changed the legacy UART (at I/O port 0x3f8) compatible string, but forgot to change the PCI UART compatible string. Now fix it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01x86: Convert to use driver model timerBin Meng
Convert all x86 boards to use driver model tsc timer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-21ns16550: unify serial_x86Thomas Chou
Unify serial_x86, and use the generic binding. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-20x86: qemu: Convert to use driver model keyboardBin Meng
Convert to use driver model keyboard on QEMU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-20x86: crownbay: Convert to use driver model keyboardBin Meng
Convert to use driver model keyboard on Intel Crown Bay. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-20x86: Add an i8042 device for boards that have itSimon Glass
Some boards have an i8042 device. Enable the driver for all x86 boards, and add a device tree node for those which may have this keyboard. Also adjust the configuration so that i8042 is always separate from the VGA, and rename the stdin driver accordingly. With this commit the keyboard will not work, but it is fixed in the next commit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-10Various Makefiles: Add SPDX-License-Identifier tagsTom Rini
After consulting with some of the SPDX team, the conclusion is that Makefiles are worth adding SPDX-License-Identifier tags too, and most of ours have one. This adds tags to ones that lack them and converts a few that had full (or in one case, very partial) license blobs into the equivalent tag. Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-21x86: Add support for Advantech SOM-6896George McCollister
Advantech SOM-6896 is a Broadwell U based COM Express Compact Module Type 6. This patch adds support for it as a coreboot payload. On board SATA and SPI are functional. On board Ethernet isn't functional but since it's optional and ties up a PCIe x4 that is otherwise brought out, this isn't a concern at the moment. USB doesn't work since the xHCI driver appears to be broken. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-21x86: galileo: Enable mrc cacheBin Meng
Now that we have added MRC cache on quark support codes, enable it on Intel Galileo board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
generated by cgit v0.10.2 at 2024-11-03 23:41:10 (GMT)