summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2010-05-05sc520: Fix minor DRAM Controller Setup bugGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05sc520: Update to new AMD CopyrightGraeme Russ
AMD recently changed the licensing of the RAM sizing code to the GPLv2 (or at your option any later version) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05sc520: Board Specific PCI InitGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05sc520: Move PCI defines to PCI include fileGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05sc520: Allow boards to override udelayGraeme Russ
If the board has a high precision mico-second timer, it maked sense to use it instead of the on-chip one Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Fix support for booting bzImageGraeme Russ
Add support for newer (up to 2.6.33) kernels Add zboot command which takes the address of a bzImage as its first argument and (optionally) the size of the bzImage as the second argument (the second argument is needed for older kernels which do not include the bzImage size in the header) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Provide weak PC/AT compatibility setup functionGraeme Russ
It is possibly to setup x86 boards to use non-PC/AT configurations. For example, the sc520 is an x86 CPU with PC/AT and non-PC/AT peripherals. This function allows the board to set itself up for maximum PC/AT compatibility just before booting the Linux kernel (the Linux kernel 'just works' if everything is PC/AT compliant) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Use CONFIG_SERIAL_MULTIGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Fix copying of Real-Mode code into RAMGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Pass relocation offset into Global DataGraeme Russ
In order to locate the 16-bit BIOS code, we need to know the reloaction offset. Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Move GDT to a safe location in RAMGraeme Russ
Currently, the GDT is either located in FLASH or in the non-relocated U-Boot image in RAM. Both of these locations are unsafe as those locations can be erased during a U-Boot update. Move the GDT into the highest available memory location and relocate U-Boot to just below it Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Add RAM bootstrap functionalityGraeme Russ
Add a parameter to the 32-bit entry to indicate if entry is from Real Mode or not. If entry is from Real Mode, execute the destructive 'sizer' routine to determine memory size as we are booting cold and running in Flash. If not entering from Real Mode, we are executing a U-Boot image from RAM and therefore the memory size is already known (and running 'sizer' will destroy the running image) There are now two 32-bit entry points. The first is the 'in RAM' entry point which exists at the start of the U-Boot binary image. As such, you can load u-boot.bin in RAM and jump directly to the load address without needing to calculate any offsets. The second entry point is used by the real-to-protected mode switch This patch also changes TEXT_BASE to 0x6000000 (in RAM). You can load the resulting image at 0x6000000 and simple go 0x6000000 from the u-boot prompt Hopefully a later patch will completely elliminate any dependency on TEXT_BASE like a relocatable linux kernel (perfect world) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Split sc520 memory sizing versus reportingGraeme Russ
This patch allows the low-level assembler boot-strap to obtain the RAM size without calling the destructive 'sizer' routine. This allows boot-strapping from a U-Boot image loaded in RAM Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Fix sc520 memory size reportingGraeme Russ
There is an error in how the assembler version of the sc520 memory size reporting code works. As a result, it will only ever report at most the size of one bank of RAM Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Fix do_go_exec()Graeme Russ
This was broken a long time ago by a49864593e083a5d0779fb9ca98e5a0f2053183d which munged the NIOS and x86 do_go_exec() Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Add register dump to crash handlersGraeme Russ
Shamelessly steal the Linux x86 crash handling code and shove it into U-Boot (cool - it fits). Be sure to include suitable attribution to Linus Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Fix MMCR AccessGraeme Russ
Change sc520 MMCR Access to use memory accessor functions Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: #ifdef out getenv_IPaddr()Graeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05x86: Add unaligned.hGraeme Russ
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2010-05-05ppc: unused memory region too close to current stack pointerNorbert van Bolhuis
This avoids a possible overwrite of the (end of) ramdisk by u-boot. The unused memory region for ppc boot currently starts 1k below the do_bootm->bootm_start->arch_lmb_reserve stack ptr. This isn't enough since do_bootm->do_bootm_linux->boot_relocate_fdt calls printf which may very well use more than 1k stack space. Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
2010-05-04Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-05-03Remove unused "local_crc32" function.Detlev Zundel
For code archeologists, this is a nice example of copy and paste history. Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-04-30at91: define matrix registers bit fieldsAsen Dimov
Signed-off-by: Asen Dimov <dimov@ronetix.at>
2010-04-30MX31: Support 128MB RAM on QONG moduleStefano Babic
The QONG module can be downsized and delivered with 128MB instead of 256MB. The patch adds run time support for the two different memory configurations. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30MX31: add pin definitions for NAND controllerStefano Babic
Add pin definitions ralted to the NAND controller to be used to set up the pin multiplexer. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30MX31: add accessor function to get a gpioStefano Babic
The patch adds an accessor function to get the value of a gpio. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30MX25 print arm clock instead of mpllclk on bootJohn Rigby
Replace call to imx_get_mpllclk with imx_get_armclk to show frequency of ARM core instead of mpll internal bus in print_cpuinfo. Signed-off-by: John Rigby <jcrigby@gmail.com> CC: Stefano Babic <sbabic@denx.de>
2010-04-30Moved board specific values in config fileStefano Babic
The lowlevel_init file contained some hard-coded values to setup the RAM. These board related values are moved into the board configuration file. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30arm, mx27: add support for SDHC1 pin initHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2010-04-30SAMSUNG: make s5p common gpio functionsMinkyu Kang
Because of s5pc1xx gpio is same as s5p seires SoC, move gpio functions to drvier/gpio/ and modify structure's name from s5pc1xx_ to s5p_. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-04-30SAMSUNG: serial: modify name from s5pc1xx to s5pMinkyu Kang
Because of other s5p series SoC will use these serial functions, modify function's name and structure's name. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-04-30at91: add defines for RTT and GPBRAlexander Holler
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
2010-04-30ARM Update mach-typestrix
Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 85b3cce880a19e78286570d5fd004cc3cac06f57 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2010-04-27Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2010-04-27Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk
2010-04-27Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-04-27Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk
2010-04-27ppc: Split MPC83xx SERDES code from MPC85xx/MPC86xx/QorIQKumar Gala
The MPC83xx SERDES control is different from the other FSL PPC chips. For now lets split it out so we can standardize on interfaces for determining of a device on SERDES is configured. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com>
2010-04-27mpc85xx: Add the ability to set LCRR[CLKDIV] to improve R/W speed of flashLan Chunhe
Signed-off-by: Lan Chunhe <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-2785xx: clean up the io_sel for PCI express of P1022Dave Liu
clean up the wrong io_sel for PCI express according to latest manual. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-2785xx: Fix compile warningKumar Gala
cpu.c: In function 'checkcpu': cpu.c:47: warning: unused variable 'gur' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-2785xx: Convert cpu_init_f code to use out_be32 for LBC registersKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-27fsl-ddr: Add extra cycle to turnaround timesDave Liu
Add an extra cycle turnaround time to read->write to ensure stability at high DDR frequencies. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-27fsl-ddr: add the macro for Rtt_Nom definitionDave Liu
add the macro definition for Rtt_Nom termination value for DDR3 Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-27ppc/p4080: Add p4080 DEVDISR2 & SRDS_PLLCR0 definesKumar Gala
Added some needed fines and some misc additional defines used by p4080 initialization. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-27ppc/p4080: Extend the GUTS memory mapDave Liu
Extend pin control and clock control to GUTS memory map Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-27ppc/p4080: Fix synchronous frequency calculationsSrikanth Srinivasan
When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-24nios2: fix no flash, add nand and mmc init in board.cThomas Chou
This patch fixes error when CONFIG_SYS_NO_FLASH. And adds nand flash and mmc initialization, which should go before env initialization. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24nios2: consolidate reset initializationThomas Chou
Global interrupt should be disabled from the beginning. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-24nios2: add dma_alloc_coherentThomas Chou
This function return cache-line aligned allocation which is mapped to uncached io region. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
generated by cgit v0.10.2 at 2024-09-11 09:05:35 (GMT)