summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2016-01-24x86: ivybridge: Move northbridge init into the probe() methodSimon Glass
Now that we have a proper driver for the nortbridge, set it up in by probing it, and move the early init code into the probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Add a driver for the bd82x6x northbridgeSimon Glass
Add a driver with an empty probe function where we can move init code in follow-on patches. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: Add a northbridge uclassSimon Glass
Add a uclass for the northbridge / SDRAM controller found on some older Intel chipsets. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Rename bd82x6x_init()Simon Glass
Rename the existing bd82x6x_init() to bd82x6x_init_extra(). We will remove this in a later patch. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Move more init to the probe() functionSimon Glass
Move SPI and port80 init to lpc_early_init(), called from the LPC's probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Move lpc_early_init() to probe()Simon Glass
Move this code to the LPC's probe() method so that it will happen automatically when the LPC is probed before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: ivybridge: Set up the LPC device using driver modelSimon Glass
Find the LPC device in arch_cpu_init_dm() as a first step to converting this code to use driver model. Probing the LPC will probe its parent (the PCH) automatically, so make sure that probing the PCH does nothing before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: Drop the weak cpu_irq_init() functionSimon Glass
There are no callers now. Platforms which need to set up interrupts their own way can implement an interrupt driver. Drop this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: queensbay: Add an interrupt driverSimon Glass
Add a driver for interrupts on queensbay and move the code currently in cpu_irq_init() into its probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: quark: Add an interrupt driverSimon Glass
Add a driver for interrupts on quark and move the code currently in cpu_irq_init() into its probe() method. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24x86: Use the IRQ device when setting up the mptableSimon Glass
Instead of searching for the device tree node, use the IRQ device which has a record of it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: Add a common PIRQ init functionSimon Glass
Most x86 interrupt drivers will want to use the standard PIRQ routing and table setup. Put this code in a common function so it can be used by those drivers that want it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: Set up interrupt routing from interrupt_init()Simon Glass
At present interrupt routing is set up from arch_misc_init(). We can do it a little later instead, in interrupt_init(). This removes the manual pirq_init() call. Where the platform does not have an interrupt router defined in its device tree, no error is generated. Some platforms do not have this. Drop pirq_init() since it is no-longer used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: Create a driver for x86 interruptsSimon Glass
It seems likely that at some point we will want a generic interrupt uclass. But this is a big undertaking as it involves unifying code across multiple architectures. As a first step, create a simple IRQ uclass and a driver for x86. This can be generalised later as required. Adjust pirq_init() to probe this driver, which has the effect of creating routing tables and setting up the interrupt routing. This is a start towards making interrupts fit better with driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: x86: spi: Convert ICH SPI driver to driver model PCI APISimon Glass
At present this SPI driver works by searching the PCI buses for its peripheral. It also uses the legacy PCI API. In addition the driver has code to determine the type of Intel PCH that is used (version 7 or version 9). Now that we have proper PCH drivers we can use those to obtain the information we need. While the device tree has a node for the SPI peripheral it is not in the right place. It should be on the PCI bus as a sub-peripheral of the LPC device. Update the device tree files to show the SPI controller within the PCH, so that PCI access works as expected. This patch includes Bin's fix-up patch from here: https://patchwork.ozlabs.org/patch/569478/ Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24dm: Expand the uclass for Platform Controller Hubs (PCH)Simon Glass
A Platform Controller Hub is an Intel concept - it is like the peripherals on an SoC and is often in a separate chip from the CPU. The chip is typically found on the first PCI bus and integrates multiple devices. We have a very simple uclass to support PCHs. Add a few operations, such as setting up the devices on the PCH and finding the SPI controller base address. Also move it into drivers/pch/ since we will be adding a few PCH drivers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-22rockchip: Add support for Raxda Rock 2Simon Glass
This board includes an RK3288 SoC on a SOM. It can be mounted on a base-board which provides a wide range of peripherals. So far this is verified to boot to a prompt from a microSD card. The serial console works as well as HDMI. Thanks to Tom Cubie for sending me a board. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: rock2: dts: Make changes for U-BootSimon Glass
Add the required pre-relocation tags and SDRAM init information for U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: rock2: Bring in device tree files from LinuxSimon Glass
Bring in the current device tree files for rock2 from linux/next commit 719d6c1. Hopefully this is the latest one. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: dts: Sync up SPDIF node with LinuxSimon Glass
This has been added and we have references to it in the rock2 board. Add this node. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: jerry: Enable EDP and HDMI video outputSimon Glass
Enable these devices using the VOPL video output device. We explicitly disable VOPB in the device tree to avoid it taking over. Since this device has an LCD display this comes up by default. If the display fails for some reason then it will attempt to use HDMI. It is possible to force it to fail (and thus fall back to HDMI) by puting 'return -EPERM' at the top of rk_edp_probe(). For now there is no easy way to select between the two. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: spl: Support full-speed CPU in SPLSimon Glass
Add a feature which speeds up the CPU to full speed in SPL to minimise boot time. This is only supported for certain boards (at present only jerry). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: jerry: Fix the SDRAM timingSimon Glass
There is a minor error in the SDRAM timing. It does not seem to affect anything so far. Fix it just in case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: spl: Drop MMC support code when not neededSimon Glass
When the board does not use MMC SPL this code is a waste of space. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: Tidy up the register-access macrosSimon Glass
These work reasonable well, but there are a few errors: - Brackets should be used to avoid unexpected side-effects - When setting bits, the corresponding upper 16 bits should be set also Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: sdram: Use syscon_get_first_range() where possibleSimon Glass
This is a shortcut to obtaining a register address. Use it where possible, to simplify the code. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: sdram: Tidy up a few commentsSimon Glass
Fix spaces in two comments in this file. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: Add a simple 'clock' commandSimon Glass
Add a command that displays the PLLs and their current rate. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: Don't skip low-level initSimon Glass
At present the low-level init is skipped on rockchip. Among other things this means that the instruction cache is left disabled. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: video: Add a video-output driverSimon Glass
Some rockchip SoCs include video output (VOP). Add a driver to support this. It can output via a display driver (UCLASS_DISPLAY) and currently HDMI and eDP are supported. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: video: Add a display driver for rockchip eDPSimon Glass
Some Rockchip SoCs support embedded DisplayPort output. Add a display driver for this so that these displays can be used on supported boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: video: Add a display driver for rockchip HDMISimon Glass
Some Rockchip SoCs support HDMI output. Add a display driver for this so that these displays can be used on supported boards. Unfortunately this driver is not fully functional. It cannot reliably read EDID information over HDMI. This seems to be due to the clocks being incorrect - the I2C bus speed appears to be up to 100x slower than the clock settings indicate. The root cause may be in the clock logic. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: Rename the CRU_MODE_CON fieldsSimon Glass
These should match the datasheet naming. Adjust them. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22pwm: rockchip: Add a PWM driver for Rockchip SoCsSimon Glass
Add a simple driver which implements the standard PWM uclass interface. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: jerry: Enable the Chrome OS ECSimon Glass
Turn on the EC and enable the keyboard. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: clk: Make rkclk_get_clk() SoC-specificSimon Glass
The current method assumes that clocks are numbered from 0 and we can determine a clock by its number. It is safer to use an ID in the clock's platform data to avoid the situation where another clock is bound before the one we expect. Move the existing code into rk3036 since it still works there. Add a new implementation for rk3288. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: reset: Use the rk_clr/setreg() interfaceSimon Glass
Use this function in preference to the macro. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: sdram: Use the rk_clr/setreg() interfaceSimon Glass
Use this function in preference to the macro. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: clock: Add a function to find a clock by IDSimon Glass
The current approach of using uclass_get_device() is error-prone. Another clock (for example a fixed-clock) may cause it to break. Add a function that does a proper search. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: jerry: Disable pmic-int-1 setup to avoid a hangSimon Glass
This hangs when activated (by probing the PMIC). Disable it for now until we understand the root cause. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: Use pwrseq for MMC start-up on jerrySimon Glass
This is defined in the device tree in Linux. Copy over the settings so that this can be used instead of hard-coding the reset line. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: Convert the PMU IOMUX registers into an arraySimon Glass
This is easier to deal with when using generic code since it allows us to use a register index instead of naming each register. Adjust it, adding an enum to improve readability. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22rockchip: Avoid using MMC code when not booting from MMCSimon Glass
This saves some code space in SPL which is useful on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-22ARM: bootm: Try to use relocated ramdiskJeffy Chen
After boot_ramdisk_high(), ramdisk would be relocated to initrd_start & initrd_end, so use them instead of rd_start & rd_end. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-01-21Merge git://git.denx.de/u-boot-dmTom Rini
2016-01-21Merge branch 'master' of git://git.denx.de/u-boot-i2c; branch 'master' of ↵Tom Rini
git://git.denx.de/u-boot-nds32
2016-01-21sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
2016-01-21nds32: Fix compile error.rick
Fix compile error with gcc 4.9.3 Signed-off-by: rick <rick@andestech.com> Cc: Andes <uboot@andestech.com>
2016-01-21dm: video: test: Add tests for the video uclassSimon Glass
Add tests that check that the video console is working correcty. Also check that text output produces the expected result. Test coverage includes character output, wrapping and scrolling. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
2016-01-21dm: video: sandbox: Convert sandbox to use driver model for videoSimon Glass
Now that driver model support is available, convert sandbox over to use it. We can remove a few of the special hooks that sandbox currently has. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v0.10.2 at 2024-08-19 00:12:09 (GMT)