summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2017-08-25ARM: rmobile: Add u-boot, dm-pre-reloc to clock nodes on Gen3Marek Vasut
We need the clock available very early, add the u-boot,dm-pre-reloc DT property on those nodes, so they come up very in the process. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-20ARM: dts: uniphier: add dr_mode property to dwc3 nodeMasahiro Yamada
Since commit 576e3cc700c5 ("usb: host: xhci-dwc3: Add dual role mode support from DT"), warning is displayed if dr_mode is not specified. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20Revert "ARM: uniphier: fix ROM boot mode for PH1-sLD3"Masahiro Yamada
This reverts commit 82d075e79fa509ffb8ecd8dd2dc216929d6e8289. Commit 82d075e79fa5 ("ARM: uniphier: fix ROM boot mode for PH1-sLD3") was a workaround for sLD3. Now the sLD3 SoC support has been removed. Revert it to allow to simplify the init code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20Revert "ARM: uniphier: move lowlevel debug init code after page table switch"Masahiro Yamada
This reverts commit bcc51c1512a3deb6a9fdd37362c6dde32ad3da23. Commit bcc51c1512a3 ("ARM: uniphier: move lowlevel debug init code after page table switch") was intended to support lowlevel debug for sLD3. Now the sLD3 SoC support has been removed. Revert it to allow to enable lowlevel debug earlier. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20ARM: uniphier: remove sLD3 SoC supportMasahiro Yamada
This SoC is too old. It is difficult to maintain any longer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-20clk: uniphier: fix unmet direct dependencies warningMasahiro Yamada
Since commit f0776a551764 ("spl: dm: Kconfig: SPL_CLK depends on SPL_DM"), the following warning is displayed: $ make uniphier_v8_defconfig warning: (ARCH_ZYNQ && ARCH_ZYNQMP && STM32F7 && CLK_UNIPHIER) selects SPL_CLK which has unmet direct dependencies (CLK && SPL_DM) While I am here, I am removing the prompt to make it user-unconfigurable option so that "select CLK_UNIPHIER" can be omitted. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-18Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini
2017-08-18Merge branch 'master' of git://git.denx.de/u-boot-coldfireTom Rini
2017-08-18rockchip: rk322x: update MACRO for mmc clksel regKever Yang
The description for eMMC/SDIO/SDMMC src is not correct, update the CRU_CLKSEL11_CON value definition according to TRM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: rk322x: update dram bank sizeKever Yang
The DRAM start address is not 0, so need to update the last bank size as: DRAM start addr + DRAM_SIZE - last bank start addr Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-18rockchip: rk3399: spl: remove unused header inclusionPhilipp Tomsich
fdtdec.h is included, but not used in rk3399-board-spl.c: remove the '#include'-statement. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-18rockchip: dts: rk3399-evb: remove redundant gmac nodeKever Yang
There are two same gmac node, remove one. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-17m68k: add board stmark2, mcf5441x basedAngelo Dureghello
Sysam stmark2 board is a generic and fully (hw and sw) open board, with a mcf54415 Coldfire CPU, 128MB of DDR2, 16MB of SPI flash and SD card as non volatile memories, and a wifi module included on-board. The board is actually used mainly for Coldfire custodian testing activity related to the mcf5441x Coldfire family. For further information please see: http://sysam.it/cff_stmark2.html Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes in v2: - remove CMD_REGINFO - add board information in commit message
2017-08-17m68k: mcf5445x: allow CS0 to be undefinedAngelo Dureghello
On some boards, CONFIG_SYS_CS0_BASE can be undefined, since CS0 is not connected to any signal. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-08-17m68k: fix cache.c for Coldfire V4EAngelo Dureghello
- fix cache.c CONFIG_CF_V4e to CONFIG_CF_V4E - fix cache.c to properly enable/disable cache for V4E Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-08-17m68k: mcf5445x: move early ddr init as board-specificAngelo Dureghello
For certain boot types and sbf, for V4 cpu's, an early ddr/sdram init is required. This patch moves this ddr/sdram early initalization away from start.S (to be board related). Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-08-17rockchip: dts: rk3399-firefly: update gmac parameterKever Yang
Update the tx_delay and rx_delay to match the timing for rk3399-firefly board to improve the stability of gmac data transfer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-17dm: mmc: Drop CONFIG_DM_MMC_OPSSimon Glass
All boards which use DM_MMC have now been converted to use DM_MMC_OPS. Drop the option and good riddance. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-17dm: imx: cm_fx6: Add device tree for cm_fx6Simon Glass
Add this file so we can use device-tree control for cm_fx6. It comes from linux 4.12. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-17dm: sata: imx: Allow driver model to be used for sataSimon Glass
Update the sata call to work with driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-17mmc: sh_sdhi: Fix the ACMD handlingMarek Vasut
The command handling in this driver is awful, esp. because the driver depends on command numbers to determine whether this is APPCMD or not. Also, handling of command RSP response types is totally wrong. This patch at least plucks out some of the custom command encoding and fixes the APPCMD handling. The RSP handling still needs work, yet that might not be needed as it turns out the uniphier-sd.c driver is in much better shape and supports the same IP, so we might be able to just drop this driver in favor of the uniphier one. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-16Merge git://git.denx.de/u-boot-tegraTom Rini
2017-08-16Merge git://git.denx.de/u-boot-sunxiTom Rini
Update A20-OLinuXino-Lime2-eMMC_defconfig to include CONFIG_SCSI Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-16Merge git://www.denx.de/git/u-boot-imxTom Rini
Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-16env: Rename some other getenv()-related functionsSimon Glass
We are now using an env_ prefix for environment functions. Rename these other functions as well, for consistency: getenv_vlan() getenv_bootm_size() getenv_bootm_low() getenv_bootm_mapsize() env_get_default() Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()Simon Glass
Rename this function for consistency with env_get(). Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename getenv_hex(), getenv_yesno(), getenv_ulong()Simon Glass
We are now using an env_ prefix for environment functions. Rename these for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename getenv/_f() to env_get()Simon Glass
We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()Simon Glass
Rename this function for consistency with env_set(). Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename common functions related to setenv()Simon Glass
We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16env: Rename setenv() to env_set()Simon Glass
We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16imx: mx7: fix build warning when CONFIG_IMX_RDC not enabledPeng Fan
Fix build warning when CONFIG_IMX_RDC not defined in defconfig. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16imx: mx6sl: simplify code using setbits_le32Peng Fan
Simplify code by removing set_preclk_from_osc with directly setbits_le32. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16imx: mx6sx: select OSC as uart's clk parentPeng Fan
As M4 is sourcing UART clk from OSC, to make UART work when M4 is enabled, need to select OSC as clk parent, 24M OSC is enough for debug UART in uboot. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16imx: mx6: soc: fix mx6sll settingsPeng Fan
There is not LDO_SOC/PU/ARM/MMDC1 on i.MX6SLL, also no need to gate/ungate all PFDs to make PFD working. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16imx: mx6: select ARM_ERRATA_845369Peng Fan
Select ARM_ERRATA_845369 for i.MX6DQ/DL/QP. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-16arm: Implement workaround for Cortex-A9 errata 845369Peng Fan
Under very rare timing circumstances, transitioning into streaming mode might create a data corruption. Present on Two or more processors or 1 core with ACP, all revisions. This erratum can be worked round by setting bit[22] of the undocumented Diagnostic Control Register to 1. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-16ARM: i.MX6: exclude the ARM errata from i.MX6 UP systemPeng Fan
The ARM errata 751472, 794072, 761320 only applied to the following configuration: This erratum affects configurations with either: - One processor if the ACP is present - Two or more processors i.MX6 family does not have the ACP and thus only the MPCore system will be impacted, which are the i.MX6DQ, i.MX6DL, and i.MX6QP. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2017-08-16imx: imx6ull: correct get_cpu_speed_grade_hzSébastien Szymanski
i.MX6ULL has different speed grades than i.MX6UL. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2017-08-16imx: imx6ul: correct get_cpu_speed_grade_hz on 696MHz SoCsSébastien Szymanski
Return the correct value when the speed grade is 696MHz. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2017-08-16imx6: clock: correct comment for PLL_VIDEOAnatolij Gustschin
This appear to be a copy-paste error, clean it up. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-16imx6: use SION macro in SDn_CMD mux mode bitfield argumentsAnatolij Gustschin
Select SION by appropriate macro instead of constant. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-16env: Drop saveenv() in favour of env_save()Simon Glass
Use the env_save() function directly now that there is only one implementation of saveenv(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-16env: Convert CONFIG_ENV_IS_IN... to a choiceSimon Glass
At present we support multiple environment drivers but there is not way to select between them at run time. Also settings related to the position and size of the environment area are global (i.e. apply to all locations). Until these limitations are removed we cannot really support more than one environment location. Adjust the location to be a choice so that only one can be selected. By default the environment is 'nowhere', meaning that the environment exists only in memory and cannot be saved. Also expand the help for the 'nowhere' option and move it to the top since it is the default. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Move all of the imply logic to default X if Y so it works again] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequenciesMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-08-15apalis-tk1: remove duplicate hdmi_ddc device tree nodeMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-08-15Move environment files from common/ to env/Simon Glass
About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-15sun50i: a64: Add A64-OLinuXino initial supportJagan Teki
OLimex A64-OLinuXino is an open-source hardware board using the Allwinner A64 SOC. OLimex A64-OLinuXino has - A64 Quad-core Cortex-A53 64bit - 1GB or 2GB RAM DDR3L @ 672Mhz - microSD slot and 4/8/16GB eMMC - Debug TTL UART - HDMI - LCD - IR receiver - 5V DC power supply Tested-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-15sun50i: a64: Add initial NanoPi A64 supportJagan Teki
NanoPi A64 is a new board of high performance with low cost designed by FriendlyElec., using the Allwinner A64 SOC. Nanopi A64 features - Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS - 1GB DDR3 RAM - MicroSD - Gigabit Ethernet (RTL8211E) - Wi-Fi 802.11b/g/n - IR receiver - Audio In/Out - Video In/Out - Serial Debug Port - microUSB 5V 2A DC power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-08-14Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
generated by cgit v0.10.2 at 2024-11-16 13:00:17 (GMT)