summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2016-12-02ARM64: zynqmp: Use DTS name for different psu_init_gpl* files in SPLMichal Simek
CONFIG_SYS_CONFIG_NAME is not proper config option for different low level init files because different board revisions requires different psu_init_gpl* files. Also at the end of moving drivers to DM all board specific configuration files should be removed. The same changes was done for Zynq. "ARM: zynq: Simplify zynq configuration" (sha1: ad5b5801264e573bfbf17a20b04c546985c5bfc1) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-30Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-11-30mx6sx: Add initial support for Samtec VIN|ING 2000 boardChristoph Fritz
This patch adds initial support for Samtec VIN|ING 2000 board. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2016-11-30Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2016-11-29imx7: SPI: add suport for SPI flash in mikroBUS slotAngus Ainslie
Enable the escpi3 nets attached to the mikroBUS slot on the i.MX7 Sabre evalution board. Also enble the SPI flash commands to work with the "flash click" board. This is V2 of this patch with changes recommended by the maintainer CC: Jagan Teki <jteki@openedev.com>
2016-11-29mx6sx: Add initial support for UDOO Neo BoardBreno Lima
UDOO Neo Board is a development board from Seco that has three models: - UDOO Neo Basic - UDOO Neo Basic Kick Starter - UDOO Neo Extended - UDOO Neo Full All versions are based on the i.MX6 SoloX processor. For more details about the UDOO Neo board, please refer to: http://www.udoo.org/udoo-neo/ This work is based on a previous commit of Francesco Montefoschi <francesco.monte@gmail.com>: https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844 Only tested on the UDOO Neo Full board. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-11-29ARM: ts4600: add basic board supportSebastien Bourdelin
This commit adds basic support including: MMC, Serial console Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-11-29board: ge: bx50v3: add the PMIC configuration supportKen Lin
Change the PMIC bulk configuration from auto mode to sync mode to avoid voltage dropout issue seen in auto mode. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
2016-11-29mx6: ddr: pass mx6_ddr_sysinfo to calibration routinesEric Nelson
The DDR calibration routines have scattered support for bus widths other than 64-bits: -- The mmdc_do_write_level_calibration() routine assumes the presence of PHY1, and -- The mmdc_do_dqs_calibration() routine tries to determine whether one or two DDR PHYs are active by reading MDCTL. Since a caller of these routines must have a valid struct mx6_ddr_sysinfo for use in calling mx6_dram_cfg(), and the bus width is available in the "dsize" field, use this structure to inform the calibration routines which PHYs are active. This allows the use of the DDR calibration routines on CPU variants like i.MX6SL that only have a single MMDC port. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Marek Vasut <marex@denx.de>
2016-11-29arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivatedSven Ebenfeld
When I tried to deactivate VIDEO support for the Wandboard, it still tried to initialize the Framebuffer and so on. That is the reason for the added ifdefs. CONFIG_VIDEO is enabled in the configuration as default and therefore nothing changes for the default user. The structs mx6dl_i2c2_pad_info and mx6q_i2c2_pad_info are only available when CONFIG_IPUV3 are set and should not be tried to access, when that define is not defined. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
2016-11-29tbs2910: Make Ethernet functional againSoeren Moch
Configure the PHY to output a 125MHz clk from CLK_25M and set tx clock delay. This patch is similar to commit 4b6035da482cccda06aeb419634f99937c9fc783 ("mx6sabresd: Make Ethernet functional again"). Signed-off-by: Soeren Moch <smoch@web.de>
2016-11-29Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2016-11-29vexpress64: Juno: Change PCI buss addresses for IO to start from zero.Liviu Dudau
Juno uses a 1:1 mapping between CPU and PCI addresses for IO. First, that will trip devices that cannot use more than 16 bits of addresses for IO, second it is un-necessary as the system can handle zero-based PCI addresses just fine. Change the mapping to start IO bus addresses from zero. Signed-off-by: Liviu Dudau <Liviu.Dudau@foss.arm.com>
2016-11-29bcm2835: Reserve the spin table in efi memory mapAlexander Graf
Firmware provides a spin table on the raspberry pi. This table shouldn't get overwritten by payloads, so we need to mark it as reserved. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-29ARM: bcm283x: use OF_CONTROL for bcm283xFabian Vogt
This patch removes use of U_BOOT_DEVICE in board/raspberrypi/rpi/rpi.c, enables OF_CONTROL in the config and adjusts the rpi_*defconfig configs. Signed-off-by: Fabian Vogt <fvogt@suse.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-29board: rpi: move uart deactivation to board_initFabian Vogt
When using OF_CONTROL, the disabled value of the mini UART platdata gets reset after board_early_init_f. So move detection and disabling to board_init and remove board_early_init_f. This uses the first device using the mini uart driver, as this method works reliably with different device trees or even no device tree at all. Signed-off-by: Fabian Vogt <fvogt@suse.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28keystone2: Move target selection to KconfigAndrew F. Davis
The config option TARGET_K2x_EVM is set by the k2x defconfigs to pick a board target, but the header configs also set K2x_EVM. This config is redundant, remove it and use TARGET_K2x_EVM everywhere in its place. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-11-28colibri_vf: usb gadget: toradex pid is now set genericallyMax Krummenacher
remove now unused CONFIG_TRDX_PID_XXX Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handlingMarcel Ziswiler
With our common code in place actually make use of it across all our modules. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28toradex: config block handlingMarcel Ziswiler
Add Toradex factory configuration block handling. The config block is a data structure which gets stored to flash during production testing. The structure holds such information as board resp. hardware revision, product ID and serial number which is used as the NIC part of the Ethernet MAC address as well. The config block will be read upon boot by the show_board_info() function, displayed as part of the board information and passed to Linux via device tree or ATAGs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
2016-11-28sunxi: add support for Nintendo NES Classic EditionFUKAUMI Naoki
Add board support for sun8i_r16 Nintendo NES Classic edition. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> [jagan: Add commit message body] Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-26Merge git://git.denx.de/u-boot-rockchipTom Rini
2016-11-26rockchip: Add support for veyron-minnie (ASUS Chromebook Flip)Simon Glass
This adds support for the Asus Chromebook Flip, an RK3288-based clamshell device which can flip into 'tablet' mode. The device tree file comes from Linux v4.8. The SDRAM parameters are for 4GB Samsung LPDDR3. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-26rockchip: Add support for veyron-mickey (Chromebit)Simon Glass
This adds support for the Asus Chromebit, and RK3288-based device designed to plug directly into an HDMI monitor. The device tree file comes from Linux v4.8. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-26rockchip: veyron: Add a note about the SDRAM voltageSimon Glass
Add a comment to indicate that we are not supporting the PWM regulator yet. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-26rockchip: Rename jerry files to veyronSimon Glass
At present we have a single rk3288-based Chromebook: chromebook_jerry. But all such Chromebooks can use the same binary with only device-tree differences. The family name is 'veyron', so rename the files accordingly. Also update the device-tree filename since this currently differs from Linux. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-26evb-rk3399: deduced the dram node size when space reservedKever Yang
The size dram node need to be deduced by the same amount of reserved space. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-11-25Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/Kconfig
2016-11-24powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCNYork Sun
Use TARGET_MPC8641HPCN from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: MPC8610HPCD: Remove macro CONFIG_MPC8610HPCDYork Sun
Use TARGET_MPC8610HPCD from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T4240RDB: Remove macro CONFIG_T4240RDBYork Sun
Use CONFIG_TARGET_T4240RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T4160RDB: Separate from T4240RDB in KconfigYork Sun
Use TARGET_T4160RDB to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T4240QDS: Remove macro CONFIG_T4240QDSYork Sun
Use CONFIG_TARGET_T4240QDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T4160QDS: Separate from T4240QDS in KconfigYork Sun
Use TARGET_T4160QDS to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T2080RDB: Rename from T208XRDB in KconfigYork Sun
T208XRDB only has one target T2080RDB. Use TARGET_T2080RDB in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T208XQDS: Split as T2080QDS and T2081QDSYork Sun
Use two separated targets in Kconfig to simplify configurations. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDBYork Sun
CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI. CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T1042RDB: Remove macro CONFIG_T1042RDBYork Sun
Use TARGET_T1042RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T1042D4RDB: Separate from T1042RDB in KconfigYork Sun
Use TARGET_T1042D4RDB in Kconfig to simplify config options. Remove macro CONFIG_T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T1042RDB_PI: Split from T1042RDB in KconfigYork Sun
Use separated TARGET_T1042RDB_PI to simplify config options. Remove macro CONFIG_T1042RDB_PI. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T1040RDB: Remove macro CONFIG_T1040RDBYork Sun
Use CONFIG_TARGET_T1040RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T1040D4RDB: Separate from T1040RDB in KconfigYork Sun
Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T1040: Remove macro CONFIG_PPC_T1040York Sun
Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T104XRDB: Split to T1040RDB and T1042RDB in KconfigYork Sun
Split ARCH_T104XRDB as ARCH_T1040RDB and ARCH_T1042RDB in Kconfig to simplify config options. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T1024: Remove macro CONFIG_PPC_T1024York Sun
Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T1024QDS: Rename Kconfig option to match the nameYork Sun
Rename TARGET_T102XQDS to TARGET_T1024QDS to match the name. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: T102xRDB: Split as T1023RDB and T1024RDBYork Sun
The defconfig files are separated. Splitting targets in Kconfig simplifies config options. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: B4420: Remove macro CONFIG_PPC_B4420York Sun
Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up existing macros.
2016-11-24powerpc: B4860QDS: Remove macro CONFIG_B4860QDSYork Sun
Use CONFIG_TARGET_B4860QDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-11-24powerpc: B4420QDS: Split from B4860QDS in KconfigYork Sun
Use TARGET_B4420QDS to simplify Kconfig options. Signed-off-by: York Sun <york.sun@nxp.com>
generated by cgit v0.10.2 at 2024-11-19 06:58:02 (GMT)