summaryrefslogtreecommitdiff
path: root/common/spl
AgeCommit message (Collapse)Author
2015-05-14spl: Correct address in spl_relocate_stack_gd()Simon Glass
During the Kconfig conversion one of the changes was missed. CONFIG_SPL_STACK_R should be CONFIG_SPL_STACK_R_ADDR since we want the address. Reported-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-10spl: spl_mmc: Partition raw boot mode for eMMCPaul Kocialkowski
This adds support for providing a partition number instead of a sector for eMMC. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-05-10spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmeticsPaul Kocialkowski
This refactors spl_mmc_load_image to use a switch/case structure and easier to understand spl_start_uboot checks. This also introduces some more automatic fallback on the next mmc boot mode as long as it keeps failing. Lines that go beyond 80 chars are also reduced by reducing the number of tabs. Debug and error strings are refctored to match a common style. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> [trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be __maybe_unused] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-04-24Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2015-04-23armv8/ls2085aqds: NAND boot supportScott Wood
This adds NAND boot support for LS2085AQDS, using SPL framework. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
2015-04-23dm: Init device tree as well as driver model in SPLSimon Glass
If enabled, make sure that the device tree is available in SPL before setting up driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-23Correct malloc_limit value for pre-relocation malloc()Simon Glass
The limit is measured from the start of the malloc() area and is not an absolute address. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18net: cosmetic: Fix checkpatch.pl failures in net.cJoe Hershberger
Finish eliminating CamelCase from net.c and other failures Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18net: Remove the bd* parameter from net stack functionsJoe Hershberger
This value is not used by the network stack and is available in the global data, so stop passing it around. For the one legacy function that still expects it (init op on old Ethernet drivers) pass in the global pointer version directly to avoid changing that interface. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> (Trival fix to remove an unneeded variable declaration in 4xx_enet.c)
2015-04-10Introduce CONFIG_SPL_PANIC_ON_RAW_IMAGEAlbert ARIBAUD \(3ADEV\)
introduce CONFIG_SPL_PANIC_ON_RAW_IMAGE. An SPL which define this will panic() if the image it has loaded does not have a mkimage signature. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-03-24remove unnecessary version.h includesRob Herring
Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
2015-03-04arm: spl: Allow board_init_r() to run with a larger stackSimon Glass
At present SPL uses a single stack, either CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and environment) require a lot of stack, some boards set CONFIG_SPL_STACK to point into SDRAM. They then set up SDRAM very early, before board_init_f(), so that the larger stack can be used. This is an abuse of lowlevel_init(). That function should only be used for essential start-up code which cannot be delayed. An example of a valid use is when only part of the SPL code is visible/executable, and the SoC must be set up so that board_init_f() can be reached. It should not be used for SDRAM init, console init, etc. Add a CONFIG_SPL_STACK_R option, which allows the stack to be moved to a new address before board_init_r() is called in SPL. The expected SPL flow (for CONFIG_SPL_FRAMEWORK) is documented in the README. Signed-off-by: Simon Glass <sjg@chromium.org> For version 1: Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-02-17Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2015-02-16spl, spl_nor: fix compiler warningHeiko Schocher
executing "tools/buildman/buildman mpc5xx" drops this warning: common/spl/spl_nor.c: In function 'spl_nor_load_image': common/spl/spl_nor.c:26:10: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] fix this. Signed-off-by: Heiko Schocher <hs@denx.de>
2015-02-16arm: spl: Provide for a board-specific loaderSimon Glass
Some boards have a special way of loading U-Boot that does not fit with the existing SPL code. For example sunxi uses an 'FEL' mode where U-Boot is loaded over USB. Add a CONFIG option and boot mode for this. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-01-28spl: Change printf to puts for "Unsupported boot-device"Stefan Roese
Microblaze currently doesn't use printf in SPL. So this one line was the only reference to it and resulted in the printf functionality to be pulled in. Exceeding the 4k size limit. Lets change the printf back to puts so that Microblaze is fixed again. The only drawback is that the detected boot-device number will not be printed. But this message alone should be helpful enough to get an idea where the boot process is broken. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-01-14spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOTMasahiro Yamada
If CONFIG_SPL_NOR_SUPPORT is defined, spl_nor_load_image() requires spl_start_uboot(), CONFIG_SYS_OS_BASE, CONFIG_SYS_SPL_ARGS_ADDR, CONFIG_SYS_FDT_BASE to be defined even if users just want to run U-Boot, not Linux. This is inconvenient. This patch is following the codying style of common/spl/spl_nand.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-06Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini
2015-01-06spl: mmc: Fix raw boot mode (related to commit ↵Guillaume GARDET
4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f) As reported by Robert Nelson, commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f may break MMC RAW boot mode. This patch fixes the check path to fix MMC Raw boot mode. Tested raw boot mode and FS boot mode on a pandaboard (rev. A3). Reported-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com> Cc: Robert Nelson <robertcnelson@gmail.com> Tested-by: Robert Nelson <robertcnelson@gmail.com>
2015-01-06spl_sata.c: Add <scsi.h>Tom Rini
We need <scsi.h> for scsi_scan(). Signed-off-by: Tom Rini <trini@ti.com>
2014-12-08spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if availableGuillaume GARDET
In SPL MMC, boot modes are exclusive. So, if MMCSD_MODE_RAW fails, the board hangs. This patch allows to try MMCSD_MODE_FS then, if available. It has been tested on a pandaboard (rev. A3). Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
2014-12-08spl: MMC U-Boot image load from raw partitionPaul Kocialkowski
Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to read the partition table, looking for a partition number instead of using a fixed sector address. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com> [trini: Only add mmc_load_image_raw_partition() when CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing conversion in spl_mmc_load_image()] Signed-off-by: Tom Rini <trini@ti.com>
2014-12-04MMC SD fs boot partition config coding style and proper descriptionPaul Kocialkowski
CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION ought to be called CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to keep it consistent with other config options such as: CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR. In addition, it is not related to raw mode booting but to fs mode instead. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@ti.com>
2014-11-26spl: Fix SPL EXT supportGuillaume GARDET
Commit 9f12cd0e062614e19734b2ab37842d387457c5e5 has broken SPL EXT support. This patch update error code check to get SPL EXT support working again. Tested on a Pandaboard (rev. A3). Reviewed-by: Suriyan Ramasami <suriyan.r@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
2014-11-24Merge git://git.denx.de/u-boot-dmTom Rini
Conflicts: drivers/serial/serial-uclass.c Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23ext4: Prepare API change for files greater than 2GBSuriyan Ramasami
Change the internal EXT4 functions to use loff_t for offsets. Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> [trini: Update common/spl/spl_ext.c] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23spl: Change debug to printf for "Unsupported boot-device"Stefan Roese
We had the problem on an AM33xx platform, that SPL detected an unsupported boot-device. But since this message is a debug message it took a bit of time to really know, where the hangup in SPL resulted from. So let's change this debug message to a printf and also print the detected boot-device that is not supported. This makes debugging of such cases much easier. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
2014-11-21dm: spl: Allow driver model to be usedSimon Glass
When enabled, set up driver model for SPL. This allows SPL to use the same drivers as the main U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Tom Rini <trini@ti.com>
2014-11-21dm: spl: Make simple malloc() available when enabledSimon Glass
Set up the simple malloc() implementation when requested, in preference to the full malloc(). Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-17spl, nand: add option to boot raw u-boot.bin image onlyHeiko Schocher
enable to boot only a raw u-boot.bin image from nand with the CONFIG_SPL_NAND_RAW_ONLY define. This option saves space on boards where spl space is low. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-27spl: move comment to the right placeAndreas Bießmann
Commit ae83d882f5fdf7aa7c5aec09cfafb593153c25d6 moved the fixed size mentioned in the comment but missed the comment. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-10-27spl: do not hang in spl_register_fat_device but return error value. It ↵Guillaume GARDET
allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT. Do not hang in spl_register_fat_device but return an error value. It allows to use both CONFIG_SPL_FAT_SUPPORT and CONFIG_SPL_EXT_SUPPORT. If FAT load fails, then EXT load is tried. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
2014-10-27spl: Add EXT support to SPLGuillaume GARDET
Add EXT filesystem support to SPL. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> [trini: Fix a warning and checkpatch problems] Signed-off-by: Tom Rini <trini@ti.com>
2014-10-27Rename some defines containing FAT in their name to be filesystem genericGuillaume GARDET
Rename some defines containing FAT in their name to be filesystem generic: MMCSD_MODE_FAT => MMCSD_MODE_FS CONFIG_SPL_FAT_LOAD_ARGS_NAME => CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME => CONFIG_SPL_FS_LOAD_PAYLOAD_NAME CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION => CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@ti.com>
2014-10-10common: spl_sata: perform SCSI scan before getting deviceRoger Quadros
At least on OMAP, init_sata() no longer performs scsi_scan() so we must do it explicitly here. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
2014-09-15Fix a few printf argument verification warningsVasili Galka
The parameters of size_t type shall be formatted using "%zu" and not using "%d". Precision argument for the "%.*s" parameters shall be of int type. Signed-off-by: Vasili Galka <vvv444@gmail.com>
2014-07-22spl: nand: read only in the size of image_header on the first accessMasahiro Yamada
For the same reason as in commit 50c8d66d, all the remaining CONFIG_SYS_NAND_PAGE_SIZE in common/spl/spl_nand.c can be replaced with sizeof(*header). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2014-05-15nand: remove CONFIG_SYS_NAND_PAGE_SIZETim Harvey
We only need to read in the size of struct image_header and thus don't need to know the page size of the nand device. Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Scott Wood <scottwood@freescale.com>
2014-04-17spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what to bootTom Rini
We add two new environment variables, falcon_args_file and falcon_image_file, which when set will override the compiled in default values for falcon mode. Signed-off-by: Tom Rini <trini@ti.com>
2014-02-19common: spl: Add spl sata boot supportDan Murphy
Add spl_sata to read a fat partition from a bootable SATA drive. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2014-02-07SPL: Add CONFIG_SUPPORT_EMMC_BOOT support to CONFIG_SPL_FRAMEWORKTom Rini
We use the switch CONFIG_SUPPORT_EMMC_BOOT today to enable some additional features of the eMMC boot partitions. Add support for being told that we have booted from one of these partitions to the spl framework and implement this on TI OMAP/related. Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-01-24spl: common: Support for USB MSD FAT image loadingDan Murphy
Add SPL support to be able to detect a USB Mass Storage device connected to a USB host. Once a USB Mass storage device is detected the SPL will load the u-boot.img from a FAT partition to target address. Signed-off-by: Dan Murphy <dmurphy@ti.com>
2014-01-24spl: common: Move FAT funcs to a common fileDan Murphy
Move the FAT functions to a common location for reuse. Signed-off-by: Dan Murphy <dmurphy@ti.com>
2013-10-31common: convert makefiles to Kbuild styleMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-09-17spl_mmc: only call printf or puts with CONFIG_SPL_LIBCOMMON_SUPPORTPaul Burton
If we don't have CONFIG_SPL_LIBCOMMON_SUPPORT defined then stdio functions are unavailable & calling them will cause a link failure. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-09-17spl: remove unnecessary (& ARM specific) include of asm/utils.hPaul Burton
ARM is the only architecture which includes this header and nothing in spl_mmc.c makes use of it. Remove the include. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2013-08-18Merge branch 'master' of git://88.191.163.10/u-boot-armTom Rini
Fixup an easy conflict over adding the clk_get prototype and USB_OTG defines for am33xx having moved. Conflicts: arch/arm/include/asm/arch-am33xx/hardware.h Signed-off-by: Tom Rini <trini@ti.com>
2013-08-16SPL: Limit image name print lengthTaras Kondratiuk
If image name is longer than 32 bytes, then it will be truncated. This will remove '\0' at the end of the line, so printf will go out of string limit. Signed-off-by: Taras Kondratiuk <taras@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
2013-07-26spl_mmc.c: Detect missing kernel image in RAW MMCTom Rini
Currently, we assume that if we can read from MMC correctly, we have found a valid image. This is not the case as an empty area will read just fine. Add a check for a valid IH_MAGIC. Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit v0.10.2 at 2024-08-15 22:55:14 (GMT)