summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)Author
2017-11-01rockchip: lion-rk3368: defconfig: select PHY_MICREL_KSZ90X1Philipp Tomsich
The RK3368-uQ7 uses a KSZ9031 PHY on-module. Enable PHY_MICREL_KSZ90X1 in the associated defconfig. References: da3b9e7f ("Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01rockchip: puma-rk3399: defconfig: select PHY_MICREL_KSZ90X1Philipp Tomsich
The RK3368-uQ7 uses a KSZ9031 PHY on-module. Enable PHY_MICREL_KSZ90X1 in the associated defconfig (this somehow got lost with da3b9e7f). References: da3b9e7f ("Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-31Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2017-10-31ARM: imx6: Enable UMS and DFU on DHCOM i.MX6 PDKMarek Vasut
Enable UMS and DFU, so that the eMMC can be accessed via the USB gadget port on the board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-31mx6slevk: Fix MMC breakage for the SPL targetFabio Estevam
Commit 001cdbbb32ef1f6 ("imx: mx6slevk: enable more DM drivers") breaks MMC support in U-Boot proper on the mx6slevk_spl_defconfig target: U-Boot SPL 2017.09-00396-g6ca43a5 (Oct 01 2017 - 16:20:18) Trying to boot from MMC1 U-Boot 2017.09-00396-g6ca43a5 (Oct 01 2017 - 16:20:18 -0300) CPU: Freescale i.MX6SL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 33C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0 MMC Device 1 not found *** Warning - No MMC card found, using default environment As mx6slevk_spl_defconfig does not use CONFIG_DM_MMC and its board file does not register the mmc controller for U-Boot proper, let's fix this by adding CONFIG_DM_MMC=y and device tree support. While at it, add more DM drivers, so that it becomes closer to mx6slevk_defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-30imx: Fix regression with CONFIG_DM_MMC=yFabio Estevam
When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the SD/eMMC card cannot be used. Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure. Tested on mx6slevk, mx7dsabresd and mx6ullevk. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Adam Ford <aford173@gmail.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-10-30configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-28Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-10-27armv8: ls1088aqds: Enable USB command on QDS for qspi-bootRan Wang
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27armv8: ls1088ardb: Enable USB command RDB qspi-bootRan Wang
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27armv8: ls1088: Move CONFIG_ENV_IS_IN_SPI_FLASH to defconfigAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27Merge git://git.denx.de/u-boot-x86Tom Rini
2017-10-27x86: galileo: Fix boot failureBin Meng
With latest codes on mainstream master, Intel Galileo board does not boot unfortunately. Git biset leads to b383d6c0 "bootstage: Convert to use malloc()". Disable bootstage support to make it boot again. The root cause needs to be investigated however. Fixes: b383d6c0 ("bootstage: Convert to use malloc()") Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-25sunxi: Add support for the Banana Pi M2-MagicMaxime Ripard
The Banana Pi M2-Magic is a small board with an Allwinner A33, an eMMC, a wifi chip and some pin headers. Enable support for it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-25SPL: SPI: select SPL_SPI_FLASH_SUPPORT on SPL_SPI_SUNXIAndre Przywara
The Allwinner SPI flash SPL boot support is guarded by the SPL_SPI_SUNXI symbol. But despite its generic name, the actual only use case for this is to provide SPI flash support to the SPL, which requires CONFIG_SPL_SPI_FLASH_SUPPORT to be defined. Select this symbol from the SPL_SPI_SUNXI Kconfig definition. This avoids doing this explicitly in the defconfig, and fixes SPI booting on the Pine64 SoPine (and -LTS version) and the OrangePi Win board (both with SPI flash). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-10-23chiliboard config: use CONFIG_DEFAULT_FDT_FILE as env variableMichal Oleszczyk
Remove hardcoded ftd file name from environment variables. Use CONFIG_DEFAULT_FDT_FILE macro instead. Signed-off-by: Michal Oleszczyk <m.oleszczyk@grinn-global.com>
2017-10-22ARM: uniphier: enable DWC3 xHCI driver reallyMasahiro Yamada
I thought commit d37d31849c6a ("ARM: uniphier: enable DWC3 xHCI driver") enabled CONFIG_USB_DWC3_UNIPHIER, but CONFIG_USB_XHCI_DWC3 was missing in uniphier_v7_defconfig. Re-add. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-21uniphier_ld4_sld8: Re-add SMC911X_BASE addressTom Rini
This was dropped by accident in the Kconfig conversion. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-21net: Add SMC911X driver to Kconfig, convertAdam Ford
We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-20Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-19x86: conga-qeval20-qa3-e3845-internal-uart_defconfig: Add ACPI resume supportStefan Roese
I've missed to add the ACPI resume support to this x86 build target. This patch adds the ACPI resume support enabling S3 suspend / resume. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-19x86: provide CONFIG_BUILD_ROMHeinrich Schuchardt
Up to now we depended on an exported variable to build u-boot.rom. We should be able to specify it in the configuration file, too. With this patch this becomes possible using the new Kconfig option CONFIG_BUILD_ROM. This option depends on CONFIG_X86 and is selected in qemu-x86_defconfig and qemu-x86_64_defconfig. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-19x86: minnowmax: Adjust VGA rom addressBin Meng
Adjust VGA rom address to 0xfffb0000 so that u-boot.rom image can be built again. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-10-17configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-15ARM: uniphier: enable DWC3 xHCI driverMasahiro Yamada
Enable CONFIGs for the DWC3 core and the UniPhier specific glue layer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-13Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2017-10-13 This is the second batch of amazing improvements for efi_loader in 2017.11: - New self tests to verify our own code - A few bug fixes - colored text support - event and SNP improvements, should get us close to iPXE working
2017-10-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-10-12ARM: imx6: Add DHCOM i.MX6 PDK board supportMarek Vasut
Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-12mx6slevk: Use PARTUUID to specify the rootfs locationFabio Estevam
mx6slevk can run different kernel versions, such as NXP 4.1 or mainline. Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the SD card changes depending on the kernel version. In order to avoid such issue, use the UUID method to specify the rootfs location. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12wandboard: Add support for the latest revd1 revisionFabio Estevam
Latest wandboard hardware revision is revd1, which brings the following new features: - PFUZE100 PMIC - AR8035 Ethernet PHY - Upgrade Wifi/BT chip to BCM4339/BCM43430. The detection mechanism is to probe the PMIC and when it is found, then the revision of the board is revd1. As the detection is done via PMIC, we need to print the board version at a later stage via CONFIG_DISPLAY_BOARDINFO_LATE and also need to disable CONFIG_DISPLAY_BOARDINFO, which is done much earlier. Make the necessary adjustments for the AR8035 PHY to work on revd1. Based on Richard Hu's work from Technexion's U-Boot tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-12arm: imx7d: add support for Compulab cl-som-imx7Ilya Ledvich
Add initial support for Compulab cl-som-imx7 SoM. The initial support includes: - MMC - eMMC - SPI flash - I2C - FEC - USB - Serial console Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
2017-10-12icore: configs: Fix merge conflict issueJagan Teki
Fix for finding mmc devices on i.MX6Q icore boards added in below comment "icorem6: Fix to find MMC devices" (sha1: a2b137b38d925df91afef52f5122927de024f81a) which is reverted in during u-boot-imx merge " Merge git://git.denx.de/u-boot-imx" (sha1: 6aee2ab68c362ace5a59f89a63abed82e0bf19e5) This patch, is recreated to fix merge conflict. Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-10-12mx7ulp_evk: Move CONFIG_CMD_BOOTZ to KconfigFabio Estevam
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2017-10-12mx25pdk: Use generic filesystem commandsOtavio Salvador
This rework the board to use the generic filesystem commands instead of forcing the use of FAT for the boot files. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-12mx53loco: Let CONFIG_DISPLAY_CPUINFO be selectedFabio Estevam
With CONFIG_DISPLAY_CPUINFO=y we get a "Reset cause" line, which brings important information of the reboot cause. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-11Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
2017-10-10configs: Re-sync CONFIG_CMD_IMLS with moveconfigTuomas Tynkkynen
The option is specified in Kconfig, but still a few config header files are overriding the choice by #undef'ing it. Re-sync the option with moveconfig to rid of the #undefs. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-10cmd: Toggle the default value of CONFIG_CMD_IMLSTuomas Tynkkynen
Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-09Merge git://git.denx.de/u-boot-videoTom Rini
2017-10-09armv8: ls1043ardb_sdcard: prepare falcon bootYork Sun
Due to a conflict with recent Primary Protected Application (PPA), PPA cannot be loaded for SPL stage, falcon boot is not enabled by default. With compatible PPA image, to enable falcon boot, activate these Kconfig options in defconfig CONFIG_SPL_FIT=y CONFIG_SPL_FSL_LS_PPA=y CONFIG_SPL_GZIP=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_OF_LIBFDT=y Because environment variables are not avaiable during SPL stage for SD boot, set "boot_os=y" as default. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-09armv8: ls1043ardb: Enable spl_board_init() functionYork Sun
CONFIG_SPL_BOARD_INIT is used for SPL boot. Enable it in defconfig for LS1043ARDB SPL targets. Signed-off-by: York Sun <york.sun@nxp.com>
2017-10-09armv7: ls1021aiot: Move CONFIG_CMD_BOOTZ to KconfigFabio Estevam
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-08configs: stm32h743-eval: enable filesystem related flagsPatrice Chotard
Enable CMD_GPT/EXT2/EXT4/EXT4_WRITE/FAT_FS_GENERIC flags Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08configs: stm32h743-disco: enable filesystem related flagsPatrice Chotard
Enable CMD_GPT/EXT2/EXT4/EXT4_WRITE/FAT_FS_GENERIC flags Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08configs: stm32h743-disco: enable SDMMC supportPatrice Chotard
Enable CMD_MMC, DM_MMC and STM32_SDMMC2 flags Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08configs: stm32h743-eval: enable SDMMC supportPatrice Chotard
Enable CMD_MMC, DM_MMC and STM32_SDMMC2 flags Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08board: STiH410-B2260: update environment variablePatrice Chotard
Update environment variable by updating: _ BOOT_TARGET_DEVICE _ CONFIGS_BOOTARGS _ kernel_addr_r, fdtfile, fdt_addr_r, scriptaddr, fdt_high, intird_high Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-07Merge git://git.denx.de/u-boot-x86Tom Rini
2017-10-07x86: theadorable-x86-xxx_defconfig: Enable setexpr commandStefan Roese
The setexpr command is useful for scripting, lets enable it for all x86 based theadorable platforms. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-10-06ARM: Add a new arch + board for QEMU's 'virt' machineTuomas Tynkkynen
This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
generated by cgit v0.10.2 at 2024-11-17 05:43:30 (GMT)