summaryrefslogtreecommitdiff
path: root/drivers/ddr/altera
AgeCommit message (Collapse)Author
2016-10-27ddr: altera: Configuring SDRAM extra cycles timing parametersChin Liang See
To enable configuration of sdr.ctrlcfg.extratime1 register which enable extra clocks for read to write command timing. This is critical to ensure successful LPDDR2 interface Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-04-20ddr: altera: Repair DQ window centering codeMarek Vasut
The code uses a lot of signed numbers, which ended up in variables of unsigned type, which resulted in all sorts of underflows. This in turn caused incorrect calibration on certain boards. Moreover, repair the readout of the DQ delay, which was being pulled from wrong register. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Staticize global variablesMarek Vasut
Just staticize global variables in sequencer, since there is no point in having these symbols available outside of the DDR code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Make DLEVEL behavior inclusiveMarek Vasut
Originally, the DLEVEL selects the debug level within the sequencer code, but only displays the messages on that particular debug level. Tweak the handling such that for particular debug level, debug messages on that level and lower are displayed. This allows better regulation of debug message verbosity. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Zero DM IN delay in scc_mgr_zero_group()Marek Vasut
This one last set of delay configuration registers was not properly zeroed out originally, fix it and zero them out. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Remove unnecessary ODT mode configMarek Vasut
There is no point in resetting the ODT setting if the write test failed, since the code will always retry the calibration and thus reconfigure the ODT anyway OR the code will fail calibration and halt. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Remove unnecessary update of the SCCMarek Vasut
Every invocation of the scc_mgr_set_dqs_en_delay_all_ranks() is followed by SCC manager update. Moreover, only this function triggers the SCC manager update internally. Thus, remove the internal invocation to avoid triggering the update twice. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Fix DRAM end value in protection ruleMarek Vasut
The hi address bitfield in the protection rule must be set to the last address in the region which the rule represents. The behavior is now in-line with code generated by Quartus 15.1 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Fix scc_mgr_set() argument orderMarek Vasut
The code should be setting registers to zero, not one register to value. Swap the order of arguments to correct the behavior. The behavior is now in-line with code generated by Quartus 15.1 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Tweak DQS tracking enable handlingMarek Vasut
In the most unlikely case the DQS tracking was to be disabled, make sure we do not errornously re-enable it. Note that DQS tracking is enabled on all systems observed thus far. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-04-20ddr: altera: Replace ad-hoc constant with macroMarek Vasut
The bit 22 is in fact DQS tracking enable bit (dqstrken) and there is a macro for this bit already, so use it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com>
2016-01-16ddr: altera: Init the rule ID in debug codeMarek Vasut
Init the rule ID, otherwise the debug code will always dump the protection settings entry 0. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com>
2015-08-23ddr: altera: Repair uninited variableMarek Vasut
Fix the following problem: drivers/ddr/altera/sequencer.c: In function 'sdram_calibration_full': drivers/ddr/altera/sequencer.c:1943:25: warning: 'found_failing_read' may be used uninitialized in this function [-Wmaybe-uninitialized] if (found_passing_read && found_failing_read) ^ drivers/ddr/altera/sequencer.c:1803:26: note: 'found_failing_read' was declared here u32 found_passing_read, found_failing_read, initial_failing_dtap; ^ Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-23ddr: altera: Replace float multiplication with integer oneMarek Vasut
This gem is really really rare, there was an actual float used in the Altera DDR init code, which pulled in floating point ops from the libgcc, just wow. Since we don't support floating point operations the same way Linux does not support them, replace this with an integer multiplication and division combo. This removes some 2kiB of size from the SPL as the floating point ops are no longer pulled in from libgcc. This was detected by enabling CONFIG_USE_PRIVATE_LIBGCC=y , which does not contain the floating point bits. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sequencer: Clean checkpatch issuesMarek Vasut
Fix most of the dangling checkpatch issues, no functional change. There are still 7 warnings, 1 checks , but those are left in place for the sake of readability of the code. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Clean data typesMarek Vasut
Replace uintNN_t with uNN. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Pluck out misc macros from codeMarek Vasut
Actually convert the sequencer code to use socfpga_sdram_misc_config instead of the various macros. This is just an sed exercise here, no manual coding needed. This patch actually removes the need to include any board-specific files in sequencer.c , so sequencer.c namespace is now no longer poluted by QTS-generated macros. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Zap SEQ_T(INIT|RESET)_CNTR._VALMarek Vasut
This is another macro used to obfuscate the real code. The T(INIT|RESET)_CNTR._VAL is always defined, so this indirection is unnecessary. Get rid of this. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Zap VFIFO_SIZEMarek Vasut
Just use READ_VALID_FIFO_SIZE directly, no need for this macro obfuscation. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Wrap misc remaining macrosMarek Vasut
Introduce structure socfpga_sdram_misc_config to wrap the remaining misc configuration values in board file. Again, introduce a function, socfpga_get_sdram_misc_config(), which returns this the structure. This is almost the final step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Pluck out IO_* macros from codeMarek Vasut
Actually convert the sequencer code to use socfpga_sdram_io_config instead of the IO_* macros. This is just an sed excercise here, no manual coding needed. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Wrap IO_* macrosMarek Vasut
Introduce structure socfpga_sdram_io_config to wrap the IO configuration values in board file. Introduce socfpga_get_sdram_io_config() function, which returns this the structure. This is another step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Pluck out RW_MGR_* macros from codeMarek Vasut
Actually convert the sequencer code to use socfpga_sdram_rw_mgr_config instead of the RW_MGR_* macros. This is just an sed exercise here, no manual coding needed. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Wrap RW_MGR_* macrosMarek Vasut
Introduce structure socfpga_sdram_rw_mgr_config to wrap the RW manager configuration values in board file. Introduce a complementary function, socfpga_get_sdram_rwmgr_config(), which returns this the structure. This is another step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Wrap ac_rom_init and inst_rom_initMarek Vasut
Introduce two wrapper functions, socfpga_get_seq_ac_init() and socfpga_get_seq_inst_init() to avoid direct inclusion of the sequencer_auto_ac_init.h and sequencer_auto_inst_init.h QTS generated files. This reduces namespace pollution again. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Zap bogus redefinition of RW_MGR_MEM_NUMBER_OF_RANKSMarek Vasut
This is defined in the QTS-generated headers, so it must not be re-defined in sequencer.h . Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Zap unused params and macrosMarek Vasut
These parameters are not used in the code, zap them and the macros which are used by them as well. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sequencer: Move qts-generated files to board dirMarek Vasut
Move the files generated by QTS into the board directory, they should not be part of the driver files at all. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08ddr: altera: sdram: Make sdram_start and sdram_end into u32Marek Vasut
Originally, both sdram_start and sdram_end were 64b values. The sdram_start had no reason for being so, since our address space is only 32b, so switching sdram_start to u32 is simple. The sdram_end is a bit more complex, since it can actually be set to (1 << 32) if someone really wanted to use an SoCFPGA with 4 GiB of DRAM and fixed the code around a little. But, the code handling the protection rules internally decrements the sdram_end variable anyway. Thus, instead of calling the code and passing in the address of the SDRAM end, pass in the address already decremented by one. This lets the sdram_end be 32b as well. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Minor cleanup in sdram_get_rule()Marek Vasut
Fix the data types and zap unnecessary type change. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Minor cleanup in sdram_set_rule()Marek Vasut
Zap an obscure unneeded cast and clean other minor nits in this function. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Add missing kerneldocMarek Vasut
Add kerneldoc to functions which are missing it, but are already cleaned up. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_write_verify()Marek Vasut
Clean the function up so that it's obvious what it is doing, fix the formating strings in debug outputs, add kerneldoc. Make the function return proper errno-compliant return values and propagate this change throughout sdram.c Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_calculate_size() part 2Marek Vasut
Clean up coding style, mostly clean up comments, add kerneldoc. Also, zap assignment of the "cs" variable, which is outright dead code, so just remove it. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_calculate_size() part 1Marek Vasut
Pluck out all of the CONFIG_HPS_SDR_CTRLCFG_* macros. This change makes sdram.c completely clear of these macros and allows removing of the ugly include of sdram.h . The namespace is now a much nicer place! Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Introduce socfpga_sdram_get_config()Marek Vasut
Introduce socfpga_sdram_get_config() function implement in a board file, which returns the socfpga_sdram_config structure. This is the last step in cleaning up the socfpga_mmr_init_full(), but not the last step which allows removing the inclusion of sdram.h from drivers/ddr/altera/sdram.c thus far. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_mmr_init_full() part 8Marek Vasut
Fix the return value so that standard errno return values can be used. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_mmr_init_full() part 7Marek Vasut
Add kerneldoc. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_mmr_init_full() part 6Marek Vasut
Pull out the block of register programming into a separate function. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_mmr_init_full() part 5Marek Vasut
Rework remaining two register setting functions such that they only return the final register value. Move the register setting into the block of register I/O in sdram_mmr_init_full(). Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_mmr_init_full() part 4Marek Vasut
Merge sdr_set_*() functions which are just setting registers among the sea of register setting in sdram_mmr_init_full(). There is no need to keep them separate this way, there is nothing special about them. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_mmr_init_full() part 3Marek Vasut
Pluck out the remaining CONFIG_HPS_SDR_CTRLCFG_ and put it into the socfpga_sdram_config structure. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_mmr_init_full() part 2Marek Vasut
Suck out all the CONFIG_HPS_SDR_CTRLCFG_* from sdram_mmr_init_full() into the socfpga_sdram_config structure. There is still one ugly macro left behind, but this will be taken care of in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up sdram_mmr_init_full() part 1Marek Vasut
Zap all the ad-hoc readbacks from the registers and other useless and broken debug output. This is really not useful and is only confusing. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Introduce socfpga_sdram_config() structureMarek Vasut
Introduce this seemingly massive structure, which holds required values of all the registers of the SDRAM controller. The idea here is to avoid including the sdram.h header file, which is full of ad-hoc macros that polute the global namespace. Once the cleanup of sdram.c would be complete and all registers would be loaded from this new socfpga_sdram_config, a board file will only pass this structure into the sdram.c . This will hide all the horrors generated by QTS in the board directory. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up set_sdr_mp_threshold()Marek Vasut
Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up set_sdr_mp_pacing()Marek Vasut
Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up set_sdr_mp_weight()Marek Vasut
Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up set_sdr_fifo_cfg()Marek Vasut
Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08ddr: altera: sdram: Clean up set_sdr_static_cfg()Marek Vasut
Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>