summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-05-06Fix various typos, scattered over the code.Robert P. J. Day
Spelling corrections for (among other things): * environment * override * variable * ftd (should be "fdt", for flattened device tree) * embedded * FTDI * emulation * controller
2016-05-03drivers: net: ldpaa: Memset pools_params as "0" before usePrabhakar Kushwaha
Memset pools_params as "0" to avoid garbage value in dpni_set_pools. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reported-by: Jose Rivera <german.rivera@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-05-02Fix spelling of "occurred".Vagrant Cascadian
Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-06armv8: LS2080A: Consolidate LS2080A and LS2085AYork Sun
LS2080A is the primary SoC, and LS2085A is a personality with AIOP and DPAA DDR. The RDB and QDS boards support both personality. By detecting the SVR at runtime, a single image per board can support both SoCs. It gives users flexibility to swtich SoC without the need to reprogram the board. Signed-off-by: York Sun <york.sun@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2016-04-06drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports onlyCodrin Ciubotariu
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-04-06drivers: net: vsc9953: Do not configure disabled portsCodrin Ciubotariu
Some SerDes protocols might not enable all l2switch ports. In this case, these ports should not be configured to perform Rx/Tx operations. This also fixes an issue when flooded frames were also switched to disabled ports and frames start to accumulate, consuming memory and eventually causing head-of-line blocking for other frames. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-04-04Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini
2016-04-04net: zynq_gem: Add SGMII support for zynqMPSiva Durga Prasad Paladugu
PCS auto negotaiation bit should be enabled along with SGMII autonegotation enabled in phy. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04net: phy: Add SGMII support for TI phySiva Durga Prasad Paladugu
Add support of SGMII to TI phy dp838367 Enable the SGMII and PCS settings in phy control, CFG2 and BIST registers Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04net: zynq_gem: Return error incase of invalid phy addressSiva Durga Prasad Paladugu
Return error from probe in case of invalid phy address. This fixes the issue of uboot crash if phy is not detected. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04net: axi_emac: Report phy-node error message permanentlyMichal Simek
Do not use debug() when printing error message. Use printf instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04net: gem: Allow to set the MAC from an EEPROMJoe Hershberger
Provide board specific option how to read MAC address from ROM. Do it in generic way to be reusable by differnet boards. If this is not enough board specific functions can be created. Signed-off-by: Joe Hershberger <joe.hershberger@gmail.com> # driver part Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04net: xilinx_axi: Clear Isolate bit if found during phy setupSiva Durga Prasad Paladugu
In SGMII cases the isolate bit might set after DMA and ethernet resets and hence check and clear during setup_phy if it was set. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04net: xilinx_axi: Use interface type instead of zeroSiva Durga Prasad Paladugu
Pass appropriate interface type to phy_connect instead of zero. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04net: zynq_gem: Add support for SGMII interfaceSiva Durga Prasad Paladugu
Add support of SGMII interface for zynq GEM. Read xlnx,emio property from DT. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04phy: Add phy driver support for xilinx PCS/PMA coreSiva Durga Prasad Paladugu
Add phy driver support for xilinx PCS/PMA core Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375Stefan Roese
This patch adds support for the mvpp2 ethernet controller which is integrated in the Marvell Armada 375 SoC. This port is based on the Linux driver (v4.4), which has been stripped of the in U-Boot unused portions. Tested on the Marvell Armada 375 eval board db-88f6720. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Acked-by: Joe Hershberger <joe.hershberger@gmail.com>
2016-04-02net: phy: Realtek RTL8211B/C PHY ID fixKarsten Merker
The RTL8211B_driver structure in drivers/net/phy/realtek.c contains a wrong PHY ID (0x1cc910 instead of 0x1cc912) in the uid field. The lowest four bits of the PHY ID encode the chip revision (B+C/D/E/F) of the RTL8211 and the code originally applied a mask of 0xfffff0 to the PHY ID, so that matching the PHY ID to the appropriate driver code was only done on the chip type (RTL8211), but not on a specific revision. After introduction of support for the RTL8211E, which needed another startup function than the older chip revisions, commit 42205047674d7fc9e0aa747273fbc7dcfbac3183 changed the mask to 0xffffff to make the chip revision relevant for the match, but didn't provide the now-relevant lower bits of the uid field for the RTL8211B/C. Fix this by setting the full PHY ID in the RTL8211B_driver uid field. Fixes: 42205047674d ("net/phy: realtek: Fix the PHY ID mask to ensure the correct Realtek PHY is detected") Signed-off-by: Karsten Merker <merker@debian.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-31net: phy: Optionally force master mode for RTL PHYMichael Haas
This patch introduces CONFIG_RTL8211X_PHY_FORCE_MASTER. If this define is set, RTL8211x PHYs (except for the RTL8211F) will have their 1000BASE-T master/slave autonegotiation disabled and forced to master mode. This is helpful for PHYs like the RTL8211C which produce unstable links in slave mode. Such problems have been found on the A20-Olimex-SOM-EVB and A20-OLinuXino-Lime2. There is no proper way to identify affected PHYs in software as the RTL8211C shares its UID with the RTL8211B. Thus, this fix requires the introduction of an #ifdef. CC: fradav@gmail.com CC: merker@debian.org CC: hdegoede@redhat.com CC: ijc@hellion.org.uk CC: joe.hershberger@ni.com Signed-off-by: Michael Haas <haas@computerlinguist.org> Tested-by: Karsten Merker <merker@debian.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-29Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2016-03-29driver: net: fsl-mc: Check NULL before pointer dereferencePrabhakar Kushwaha
NULL pointer should be checked before any dereference. This patch move memest after the NULL pointer check. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reported-by: Jose Rivera <german.rivera@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-29driver: net: fsl-mc: Free dflt_dpio pointer after its usagePrabhakar Kushwaha
Free dflt_dpio pointer after its usage during error handling Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reported-by: Jose Rivera <german.rivera@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-27net: rtl8169: Fix build error when DEBUG is onBin Meng
When DEBUG_RTL8169 is on, a build error occurs in function 'rtl_init': error: 'dev' undeclared. Fix this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-22net: Move CONFIG_RTL8169 to KconfigBin Meng
Introduce CONFIG_RTL8169 in Kconfig and move over boards' defconfig to use that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Stephen Warren <swaren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-22net: Move CONFIG_RTL8139 to KconfigBin Meng
Introduce CONFIG_RTL8139 in Kconfig and move over boards' defconfig to use that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> [trini: Fixup MPC8641HPCN* and r2dplus configs] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-21driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0Prabhakar Kushwaha
Return value of get_mc_boot_status() in case of failure is not necessary to be -1. So update the error condition check. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reported-by: Yao Yuan <yao.yuan@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-21driver: net: ldpaa_eth: Add support of PHY frameworkPrabhakar Kushwaha
This patch integrate DPAA2 ethernet driver existing PHY framework. Call phy_connect and phy_config as per available DPMAC id defined in SerDes Protcol. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-14Kconfig: Move CONFIG_FIT and related options to KconfigSimon Glass
There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-02-26net: phy: atheros: Fix problem with phy_reset() clearing BMCRAlison Wang
In commit <a058052c358c> [net: phy: do not read configuration register on reset], phy_reset() will clear the BMCR register. Bit 12(AUTO_NEGOTIATION) is cleared too. It causes auto-negotiation timeout error on Atheros's PHY AR8033. To fix this problem, genphy_config_aneg() and genphy_restart_aneg() needs to be called in ar8035_config() to enable and restart auto-negotiation. Signed-off-by: Alison Wang <alison.wang@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-24Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2016-02-24driver/fm: fdt.c: fix fdt_fixup_fman_firmware() to support ARM platformsQianyu Gong
Use fdt32_to_cpu() to convert the data correctly for both endianness platforms. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24fm: fdt: Move fman ucode fixup to driver codeQianyu Gong
Not only powerpc/mpc85xx but also Freescale Layerscape platforms will use fdt_fixup_fman_firmware() to insert Fman ucode blob into the device tree. So move the function to Fman driver code. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-24qe: move drivers/qe/qe.h to include/fsl_qe.hQianyu Gong
As the QE firmware struct is shared with Fman, move the header file out of drivers/qe/. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-02-22net: phy: realtek: Use generic genphy_parse_link() for RTL8211EMichal Simek
The problem with current implementation is that SPDDONE bit is 1 but link bit is zero. That's why phydev->link is setup to 0 which ending up in driver failure that link is not up. Log: Zynq> dhcp ethernet@e000b000 Waiting for PHY auto negotiation to complete....... done ethernet@e000b000: No link. There is at least 1ms delay between spddone bit and link up. Use genphy_read_status() instead of realtek implemenation which is working with page 11. Linux driver is also using generic implementation. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-20Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini
2016-02-18drivers: at91: clean up peripheral clock codeWenyou Yang
Due to introducing the new peripheral clock handle functions, use these functions to reduce the duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> [fixup for missing clk.h in at91_emac.c] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-02-18net: phy: marvell: Fix problem with phy_reset() clearing BMCRStefan Roese
With commit a058052c [net: phy: do not read configuration register on reset], phy_reset() will clear the BMCR register. Resulting in bit 12 being cleared (A/N enable). This leads to autonegotiation link problems, at least on the Marvell Armada ClearFog board. I suspect that other boards using this driver will be affected as well. At the of m88e1111s_config(), phy_reset() is called. This is not needed for the PHY to load the changed configuration, as phy_reset() is called a few lines before already. So lets call genphy_restart_aneg() here instead to start the AN correctly. Tested on clearfog. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Hao Zhang <hzhang@ti.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Andy Fleming <afleming@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-18net: phy: marvell: Call phy_reset() where possibleStefan Roese
Instead of coding the soft PHY reset function multiple times in marvell.c, lets call the common phy_reset() function from phy.c. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Hao Zhang <hzhang@ti.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Andy Fleming <afleming@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08drivers: net: keystone_net: convert driver to adopt device driver modelMugunthan V N
Adopt keystone_net driver to adopt device driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-08drivers: net: phy: micrel: fix build errors with CONFIG_DM_ETHMugunthan V N
When Micrel phy is selected without CONFIG_PHY_MICREL_KSZ9031 or CONFIG_PHY_MICREL_KSZ9021 there is a build error. Fixing this by adding proper ifdefs drivers/net/phy/micrel.c:370:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: error: array type has incomplete element type static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ drivers/net/phy/micrel.c: In function ‘ksz9031_of_config’: drivers/net/phy/micrel.c:377:23: error: array type has incomplete element type struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c:379:13: error: ‘ksz90x1_rxd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, ^ drivers/net/phy/micrel.c:379:13: note: each undeclared identifier is reported only once for each function it appears in drivers/net/phy/micrel.c:380:13: error: ‘ksz90x1_txd_grp’ undeclared (first use in this function) { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, ^ drivers/net/phy/micrel.c:386:3: warning: implicit declaration of function ‘ksz90x1_of_config_group’ [-Wimplicit-function-declaration] ret = ksz90x1_of_config_group(phydev, &(ofcfg[i])); ^ drivers/net/phy/micrel.c:377:23: warning: unused variable ‘ofcfg’ [-Wunused-variable] struct ksz90x1_ofcfg ofcfg[] = { ^ drivers/net/phy/micrel.c: At top level: drivers/net/phy/micrel.c:370:39: warning: ‘ksz9031_ctl_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = ^ drivers/net/phy/micrel.c:372:39: warning: ‘ksz9031_clk_grp’ defined but not used [-Wunused-variable] static const struct ksz90x1_reg_field ksz9031_clk_grp[] = ^ scripts/Makefile.build:277: recipe for target 'drivers/net/phy/micrel.o' failed make[1]: *** [drivers/net/phy/micrel.o] Error 1 Makefile:1201: recipe for target 'drivers/net/phy' failed make: *** [drivers/net/phy] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-08Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini
2016-02-06net: davinci_emac: fix NULL check after pointer dereferenceVishwas Srivastava
NULL check is made after the pointer dereference. This patch fixes this issue. Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com> CC: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-02-06net: fix wrong initialization in davinci-emac driverVishwas Srivastava
emac module of the davinci platform supports only 8 tx and 8 rx channels (total 16). emac driver for davinci platform, however, while doing initialization of the dma descriptor head pointers, wrongly initializes the 16 head pointers (instead of 8) for tx dma and 16 head pointers (insted of 8) for rx dma, which is wrong. The result is, that this register initilization spills over the other registers which was not intended and is undesirable. This patch fixes this problem. Signed-off-by: Vishwas Srivastava <vishu.kernel@gmail.com> CC: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2016-02-06Use correct spelling of "U-Boot"Bin Meng
Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-05net: e1000: Convert to use DM PCI APIBin Meng
Update this driver to use proper DM PCI APIs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05net: designware: Use dm_pci_mem_to_phys() in the probe routineBin Meng
Convert to use native DM PCI API dm_pci_mem_to_phys(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-05net: pch_gbe: Convert to use DM PCI APIBin Meng
Use native DM PCI APIs instead of legacy compatible ones. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-02Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini
2016-02-02Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2016-02-01drivers: net: Add ethernet driver for Microchip PIC32.Purna Chandra Mandal
This driver implements MAC and MII layer of the ethernet controller. Network data transfer is handled by controller internal DMA engine. Ethernet controller is configurable through device-tree file. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>