summaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)Author
2015-12-10sunxi: power: axp818: add support for axp818 drivervishnupatekar
AXP818 is rsb based PMIC and used on Allwinner A83T H8 Homlet dev board. It's registers are different and calculating reg config is different than that of earlier axp power ICs. DCDC1, DCDC2, DCDC3 and DCDC5 is implemented at the moment. all other voltages can be added subsequently. AXP datasheet is uploaded to wiki: http://linux-sunxi.org/File:AXP818_datasheet_Revision1.0.pdf Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-22sunxi: Add basic H3 supportJens Kuske
Add initial sun8i H3 support, only uart + mmc are supported for now. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-20Move console definitions into a new console.h fileSimon Glass
The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-02dm: regulator: add function device_get_supply_regulator()Przemyslaw Marczak
Some devices are supplied by configurable regulator's output. But there was no function for getting it. This commit adds function, that allows for getting the supply device by it's phandle. The returned regulator device can be used with regulator uclass's API. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02dm: pmic: add s2mps11 PMIC I/O driverPrzemyslaw Marczak
This driver allows I/O operations on the Samsung S2MPS11 PMIC, which provides lots of LDO/BUCK outputs. To enable it, update defconfig with: - CONFIG_PMIC_S2MPS11 and additional, if were not defined: - CONFIG_CMD_PMIC - CONFIG_ERRNO_STR The binding info: doc/device-tree-bindings/pmic/s2mps11.txt Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-20sunxi: power: Change axp209 LDO3 and LDO4 default to disabledHans de Goede
LDO3 and LDO4 are normally either unused, or used to power csi attached camera sensors, and as such do not need to be enabled at boot time. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20sunxi: power: Add support for disabling axp209 regulatorsHans de Goede
Add support for disabling the regulators found on the axp209 pmic. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20sunxi: power: Drop protection against multiple calls from axp221 axp_init()Hans de Goede
The only thing axp221.c's axp_init() does which needs protection against multiple calls is calling pmic_bus_init, and pmic_bus_init() itself is already protected against being called multiple times. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20sunxi: power: Use pmic_bus functions for axp152 / axp209 driverHans de Goede
Use the generic pmic_bus helpers for the axp152 / axp209 drivers, rather then having them define their own register read / write functions. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20sunxi: power: Change A23/A33 aldo1 default voltage to 3.0VHans de Goede
On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V, make this the default. Note that this does not cause any functional changes since all sun8i board defconfig-s already contained: CONFIG_AXP_ALDO1_VOLT=3000 . Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20sunxi: power: Change A23/A33 VDD-SYS default from 1.2V to 1.1VHans de Goede
Change the axp223 dcdc2 / VDD-SYS default from 1.2V to 1.1V, 1.1V is the value recommended by Allwinner and is what most fex files specify. This has been tested on a number of A23/A33 tablets including on an A23 Ippo-q8h-v1.2 PCB tablet which has a fex file which specifies 1.2V (which is where our original 1.2V default comes from). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20sunxi: power: Unify axp pmic function namesHans de Goede
Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20sunxi: power: Make all voltages configurable through KconfigHans de Goede
On boards with axp221/223 pmic-s we already allow configuring most voltages. Make the Kconfig options for these also apply to boards with axp152 / axp209 pmic-s and extend them to configure all voltages. The Kconfig defaults are chosen so that this commit does not introduce any functional changes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-20sunxi: Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWERHans de Goede
Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER settings, removing them from CONFIG_SYS_EXTRA_OPTIONS. Note that sun5i boards can have either an AXP209 or an AXP152 pmic, the Kconfig default is AXP209, boards with an AXP152 must explicitly select this. Likewise boards without a pmic must explicitly select SUNXI_NO_PMIC in their defconfig. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-09-03Merge git://git.denx.de/u-boot-rockchipTom Rini
2015-09-03power: regulator: Add a driver for ACT8846 regulatorsSimon Glass
Add a full regulator driver for the ACT8846. This provides easy access to voltage and current settings for each regulator. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-03power: Add support for ACT8846 PMICSimon Glass
Add a driver for the ACT8846 PMIC. This supports several LDOs and BUCKs and is connected to the I2C bus. This driver supports using a regulator driver to access the regulators. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-02power: pmic: add pfuze3000 supportAdrian Alonso
* Add pmic pfuze3000 support, implement power_pfuze3000_init to be used in power_init_board callback function. Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-31sunxi: axp221: Allow specifying dcdc2 voltage via KconfigHans de Goede
Allow specifying the axp221 dcdc2 voltage via Kconfig, this is necessary because on some boards the 1.2V default does not work reliable. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-08-18of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada
We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-14Add missing part of: "power: pmic: pfuze100 support driver model"Peng Fan
This part of mentioned commit, was missed by my mistake during the rebase. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Original commit message: power: pmic: pfuze100 support driver model 1. Support driver model for pfuze100. 2. Introduce a new Kconfig entry DM_PMIC_PFUZE100 for pfuze100 3. This driver intends to support PF100, PF200 and PF3000, so add the device id into the udevice_id array. 4. Rename PMIC_NUM_OF_REGS macro to PFUZE100_NUM_OF_REGS. Change-Id: I4fc88414f3c0285f9648e47ec7aed60addeccc4d Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-13pmic: pmic_hi6553: Add a driver for the hi6553 pmic found on hikey board.Peter Griffin
This adds a simple pmic driver for the hi6553 pmic which is used in conjunction with the hi6220 SoC on the hikey board. Eventually this driver will be updated to be a proper UCLASS PMIC driver which can parse the voltages direct from device tree. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
2015-08-13power: twl4030: Power off supportPaul Kocialkowski
This adds support for powering off (the omap3 SoC) from the twl4030. This is especially useful when the kernel does not actually power off the device using this method but reboots and leaves it up to the bootloader to actually turn the power off. Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-08-12dm: pmic: max77686: Correct two typos in a commentSimon Glass
These were pointed out in review but I missed them. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-12power: regulator: max77686 correct variable typePeng Fan
The return type of pmic_read and pmic_write is signed int, so correct variable 'ret' from type unsigned int to int. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Simon Glass <sjg@chromium.org> Cc: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-12power: regulator: add pfuze100 supportPeng Fan
1. Add new regulator driver pfuze100. * Introduce struct pfuze100_regulator_desc for maintaining info for one regulator. 2. Add new Kconfig entry DM_REGULATOR_PFUZE100 for pfuze100. 3. This driver intends to support PF100, PF200 and PF3000. 4. Add related macro definition in pfuze header file. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org>
2015-08-12power: pmic: pfuze100 support driver modelPeng Fan
1. Support driver model for pfuze100. 2. Introduce a new Kconfig entry DM_PMIC_PFUZE100 for pfuze100 3. This driver intends to support PF100, PF200 and PF3000, so add the device id into the udevice_id array. 4. Rename PMIC_NUM_OF_REGS macro to PFUZE100_NUM_OF_REGS. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-12power: regulator use node name when no regulator-namePeng Fan
If there is no property named 'regulator-name' for regulators, choose node name instead, but not directly return failure value. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org>
2015-08-06power: Remove old TPS65090 driversSimon Glass
Remove the old drivers (both the normal one and the cros_ec one) now that we have new drivers that use driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-06dm: power: Don't return an error when regulators are not autosetSimon Glass
Not all regulators can be set up automatically. Adjust the code so that regulators_enable_boot_on() will return success when some are skipped. Only genuine errors are reported. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: pmic: max77686: Support all BUCK regulatorsSimon Glass
Add support for all BUCK regulators, now that the correct register is accessed for each. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-06dm: power: max77686: Correct BUCK register accessSimon Glass
Some regulators use the wrong voltage register and thus it is not possible to control them. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: pmic: Correct the pmic_reg_write() implementationSimon Glass
This should write the register, not read it. Fix this bug. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: pmic: max77686: Correct a few nitsSimon Glass
The driver name should not have a space in it. Also the regulator names should match the case of the device tree. Fix these problems. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: power: Add support for S5M8767 regulatorsSimon Glass
This PMIC is used with SoCs which need a combination of BUCKs and LDOs. The driver supports changing voltage and enabling/disabling each regulator. It supports the standard device tree binding and supports driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: power: Add support for the S5M8767 PMICSimon Glass
This PMIC is used with SoCs which need a combination of BUCKs and LDOs. The driver supports probing and basic register access. It supports the standard device tree binding and supports driver model. A regulator driver can be provided also. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: power: Add support for TPS65090 FETsSimon Glass
The TPS65090 has 7 FETs which are modelled as regulators. This allows them to be controlled by drivers easier, accessed through the 'regulator' command and used by other drivers. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: power: Add a new driver for the TPS65090 PMICSimon Glass
The existing TPS65090 driver does not support driver model. Add a new one that does. This can be used as a base for a regulator driver also. It uses the standard device tree binding. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-06dm: cros_ec: Convert the I2C tunnel code to use driver modelSimon Glass
The Chrome OS EC supports tunnelling through to an I2C bus on the EC. This currently uses a copy of the I2C command code and a special 'crosec' sub-command. With driver model we can define an I2C bus which tunnels through to the EC, and use the normal 'i2c' command to access it. This simplifies the code and removes some duplication. Add an I2C driver which tunnels through to the EC. Adjust the EC code to support binding child devices so that it can be set up. Adjust the existing I2C xfer function to fit driver model better. For now the old code remains to allow things to still work. It will be removed in a later patch once the new flow is fully enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-02Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2015-07-26power: pmic: Add support for MAX77696 PMICFabio Estevam
Add support for MAX77696 PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-21power: pmic: Use trailing_strtol() instead of a local functionSimon Glass
Use the common function to obtain the number from the end of the string, instead of a local function. Also tweak the position of a debug() statement. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21dm: pmic: Add functions to adjust PMIC registersSimon Glass
It is a common requirement to update some PMIC registers. Provide some simple convenience functions to do this. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21dm: power: Use debug() for errors in regulator uclassSimon Glass
To reduce unnecessary code size in an uncommon code path, use debug() where possible(). The driver returns an error which indicates failure. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21dm: power: Add a function to set up all regulatorsSimon Glass
The device tree provides information about which regulators should be on at boot, or always on. Use this to set them up automatically. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21dm: pmic: Split output from functionSimon Glass
The regulator_autoset() function mixes printf() output and PMIC adjustment code. It provides a boolean to control the output. It is better to avoid missing logic and output, and this permits a smaller SPL code size. So split the output into a separate function. Also rename the function to have a by_name() suffix, since we would like to be able to pass a device when we know it, and thus avoid the name search. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21dm: power: Add regulator flags to centralise auto-set logicSimon Glass
Decide when the regulator is set up whether we want to auto-set the voltage or current. This avoids the complex logic spilling into the processing code. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21dm: power: Avoid case-insensitve match for child namesSimon Glass
This is not user input (i.e. from the command line). It should be possible to get the case correct and avoid the case-insensitive match. This will help avoid sloppy device tree setups. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-05-15sandbox: add: sandbox PMIC device drivers: I2C emul, pmic, regulatorPrzemyslaw Marczak
This commit adds emulation of sandbox PMIC device, which includes: - PMIC I2C emulation driver - PMIC I/O driver (UCLASS_PMIC) - PMIC regulator driver (UCLASS_REGULATOR) The sandbox PMIC has 12 significant registers and 4 as padding to 16 bytes, which allows using 'i2c md' command with the default count (16). The sandbox PMIC provides regulators: - 2x BUCK - 2x LDO Each, with adjustable output: - Enable state - Voltage - Current limit (LDO1/BUCK1 only) - Operation mode (different for BUCK and LDO) Each attribute has it's own register, beside the enable state, which depends on operation mode. The header file: sandbox_pmic.h includes PMIC's default register values, which are set on i2c pmic emul driver's probe() method. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
2015-05-15dm: regulator: uclass driver code cleanupPrzemyslaw Marczak
This cleanup includes: - remove of the preprocessor macros which pointed to long name functions - update of the names of some regulator uclass driver functions - cleanup of the function regulator_autoset() - reword of some comments of regulator uclass header file - regulator_get_by_platname: check error for uclass_find_* function calls - add function: regulator_name_is_unique - regulator post_bind(): check regulator name uniqueness - fix mistakes in: regulator/Kconfig - regulator.h: update comments - odroid u3: cleanup the regulator calls Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>