summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2014-01-12video: ipu reg: Correct reserved array size in struct ipu_idmacLiu Ying
The array reserved as a placeholder in the structure ipu_idmac should contain 44 32bit unsigned integer entries instead of 45 ones, because the placeholder is located bewteen the register IDMAC_SC_CORD1 and the register IDMAC_CH_BUSY_1 with the address offsets of 0x804c and 0x8100 respectively. Reported-by: Robin Gong <b38343@freescale.com> Acked-by: Robin Gong <b38343@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
2014-01-12video: ipu reg: Correct reserved1 array size in struct ipu_cmLiu Ying
The array reserved1 as a placeholder in the structure ipu_cm should contain 4 32bit unsigned integer entries instead of 16 ones, because the placeholder is located bewteen the register IPU_CH_DB_MODE_SEL_1 and the register IPU_ALT_CH_DB_MODE_SEL_0 with the address offsets of 0x154 and 0x168 respectively. Reported-by: Robin Gong <b38343@freescale.com> Acked-by: Robin Gong <b38343@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
2013-12-16Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2013-12-10Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD
Conflicts: arch/arm/cpu/armv7/rmobile/Makefile doc/README.scrapyard Needed manual fix: arch/arm/cpu/armv7/omap-common/Makefile board/compulab/cm_t335/u-boot.lds
2013-12-04video: ipu_disp: Return a negative value on errorFabio Estevam
We should return a negative error number (-EINVAL) on error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-11-13video: remove AT91 legacy API from bus_vcxkAndreas Bießmann
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2013-11-12lcd: add DataImage SCF0403x LCD panel supportNikita Kiryanov
Add SPI-based driver for DataImage SCF0403852GGU04 and SCF0403526GGU20 LCD panels. Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-11-12video: bcm2835: respect the pitch valueAndre Heider
Depending on the firmware's video options [1] the active SDTV or HDTV mode can yield a framebuffer with noncontiguous horizontal lines, giving a messed up display, for both, u-boot and the loaded kernel. Fix this by setting lcd_line_length to the pitch value of the configured framebuffer. [1] http://elinux.org/RPiconfig#Video_mode_options Signed-off-by: Andre Heider <a.heider@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2013-10-31drivers: convert makefiles to Kbuild styleMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-30video, formike: change tag/val writeHeiko Schocher
write first the "tag" 8 bit value and then the "val" 8-bit to the display. Tested on the rut board. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
2013-10-30video, cfb_console: make background and foreground color configurableHeiko Schocher
make CONSOLE_BG_COL/CONSOLE_FG_COL configurable through board config file. Clear video screen in video_init(). Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
2013-10-30video: ipu_disp: Fix clock polarity logicFabio Estevam
Currently the HDMI splash screen image quality on mx6solo does not show a very stable image. By comparing the IPU driver from U-boot with the one from FSL 4.1.0 BSP, we can see that there is an inverted logic for setting the DI_GEN_POL_CLK bit. >From FSL BSP [1] we have: if (!sig.clk_pol) di_gen |= DI_GEN_POLARITY_DISP_CLK; Applying the same logic into U-boot fixes the HDMI image stability. [1] git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/mxc/ipu3/ipu_disp.c?h=imx_3.0.35_4.1.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
2013-10-14Coding Style cleanup: replace leading SPACEs by TABsWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: Tom Rini <trini@ti.com>
2013-10-14Coding Style cleanup: remove trailing white spaceWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-09-04Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-08-28video: add formike lcd panel initHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Anatolij Gustschin <agust@denx.de>
2013-08-18Merge branch 'master' of git://88.191.163.10/u-boot-armTom Rini
Fixup an easy conflict over adding the clk_get prototype and USB_OTG defines for am33xx having moved. Conflicts: arch/arm/include/asm/arch-am33xx/hardware.h Signed-off-by: Tom Rini <trini@ti.com>
2013-08-12exynos: video: change mipi dsi write function parameters correctlyDonghwa Lee
This patch have changed mipi dsi write functions' parameters correctly so that type cast operations were removed. And mipi dsi payload is composed with array of panel commands to improve readability. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
2013-08-12video: Encapsulate font in video_font_data.hMarek Vasut
This patch moves all the font configuration values into video_font_data.h so they are all in the right place with the font. The video_font.h now only includes video_font_data.h and will allow us to select and include different font once more fonts are added. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> [agust: fixed build warning for mcc200] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-08-10video: add an option to skip cfb console initHeiko Schocher
This patch add an option to skip cfb console init for boards who want to show a logo, but not use the cfb console. This is needed for the siemens boards, which have a bmp bootlogo, but do not need the cfb console. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de> [agust: use '__weak int board_cfb_skip(void)'] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-08-10video, da8xx-fb: show fb addr in bdinfoHeiko Schocher
without this patch the bdinfo command shows: U-Boot# bd arch_number = 0x000010DC [...] sp start = 0x8EF32F20 FB base = 0x00000000 with this patch it shows the address where the framebuffer for this video driver start: arch_number = 0x000010DC [...] sp start = 0x8EF32F20 FB base = 0x8EF3C788 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
2013-08-10video, da8xx-fb: changes for am335x usageHeiko Schocher
to use this driver also on am335x based boards, the following changes are made: - struct lcd_ctrl_config lcd_cfg is now configurable through board code - controller base is configurable through define DA8XX_LCD_CNTL_BASE. To be compatible with older da8xx based boards: If this define is missing, the DAVINCI_LCD_CNTL_BASE is used - Determine LCD IP Version, and make the driver working on lcd revision register values: Version 1: 0x4C100102 Version 2: 0x4F200800 0x4F201000 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
2013-08-10video, da8xx: move da8xx-fb.h to drivers/videoHeiko Schocher
the da8xx-fb driver works also on am335x boards. So move the da8xx-fb.h file from arch/arm/include/asm/arch-davinci to drivers/video, so this driver can used from am335x based boards. Also add WVGA panel_type. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
2013-08-10video: add L5F31188 TFT-LCD panel driverHyungwon Hwang
This is u-boot driver for L5F31188 panel. I tested it in the board based on MIPI DSI with EXYNOS4 series, and it worked well. Changes in V2: - Replaced license header by SPDX-License-Identifier. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Donghwa Lee <dw09.lee@samsung.com> [agust: sort Makefile entry alphabetically] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-08-10video: Fix cfb_console for 4-bit wide fontMarek Vasut
The cfb_console can't handle 4-bit wide font properly, since with 4-bit wide font, all 8 bits are drawn. Unbreak the video_drawchars() function to correctly render 4-bits only on such fonts. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
2013-08-09video: Implement continuous screen refresh for SmartLCD into mxsfbMarek Vasut
The LCDIF interface doesn't give us any means to do continuous refresh when driving a SmartLCD. To work this around, we produce a special circular DMA descriptor, which only writes the HW_LCDIF_CTRL0 register and sets the RUN bit. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
2013-08-09video: Add System-Mode configuration hook into mxsfbMarek Vasut
Add hook that allow configuring SmartLCD attached the MXS LCDIF controller operating in System-Mode. This hook can be overriden by a platform-specific SmartLCD programming routine, which writes the SmartLCD specific values into it's registers. Also, this patch makes sure the SYNC signals are off for the SmartLCD case. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
2013-08-09video: Allocate the MXSFB framebuffer alignedMarek Vasut
Allocate the framebuffer aligned so it can be flushed and the flush_dcache_range() function won't complain. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2013-07-31Merge git://git.denx.de/u-boot-armStefano Babic
Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-07-29mxc_ipuv3: fix memory alignment of framebufferEric Nelson
The frame-buffer on i.MX boards needs to be aligned for DMA. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-07-24Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
2013-07-12Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: Tom Rini <trini@ti.com>
2013-07-10Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-07-08video: consolidate splash screen alignment codeAnatolij Gustschin
Code for checking "splashpos" environment variable is duplicated in drivers, move it to the common function. Call this function also in the bmp display command to consider "splashpos" settings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-07-01video: lcd: Add CONFIG_SPLASH_SCREEN_PREPARE support to CONFIG_VIDEORobert Winkler
Create splash.c/h to put the function and any future common splash screen code in. Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2013-07-01drivers:video:s6e8ax0: change data_to_send array to staticPiotr Wilczek
This patch change 'data_to_send' array to static to avoid unaligned access exeption on some platforms (ex Trats2). Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com> CC: Anatolij Gustschin <agust@denx.de>
2013-06-28Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2013-06-28video: mxsfb: Break the line in videomode messageFabio Estevam
Currently we have the following on boot: CPU: Freescale i.MX28 rev1.2 at 454 MHz BOOT: SSP SD/MMC #0, 3V3 DRAM: 128 MiB MMC: MXS MMC: 0 Video: MXSFB: 'videomode' variable not set!In: serial Break the line of the warning message in order to have a better reading format. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-06-22Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2013-06-21video: exynos_fb: Add the missing #else clauseAjay Kumar
This patch fixes a bug introduced while adding DT support to Exynos FIMD driver: commit c23f3157d69bbb6c044256870f745f195b12431e Author: Ajay Kumar <ajaykumar.rs@samsung.com> Date: Thu Feb 21 23:53:01 2013 +0000 video: exynos_fb: add DT support for FIMD driver Even though this part of code was missing, things were working fine on Exynos5250 because, samsung_get_base_fimd() used to give the correct base address for Exynos5250 FIMD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-06-19Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD
Conflicts: spl/Makefile
2013-06-13Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
Small conflict over DRA7XX updates and adding SRAM_SCRATCH_SPACE_ADDR Conflicts: arch/arm/include/asm/arch-omap5/omap.h Signed-off-by: Tom Rini <trini@ti.com>
2013-06-13SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDTAmar
This patch enables and initialises DWMMC for SMDK5250. Supports both FDT and non-FDT. This patch creates a new file 'exynos5-dt.c' meant for FDT support. exynos5-dt.c: This file shall contain all code which supports FDT. Any addition of FDT support for any module needs to be added in this file. smdk5250.c: This file shall contain the code which supports non-FDT. version. Any addition of non-FDT support for any module needs to be added in this file. May be, the file smdk5250.c can be removed in near future when non-FDT is not required. The Makefile is updated to compile only one of the files exynos5-dt.c / smdk5250.c based on FDT configuration. NOTE: Please note that all additions corresponding to FDT need to be added into the file exynos5-dt.c. At same time if non-FDT support is required then add the corresponding updations into smdk5250.c. Signed-off-by: Amar <amarendra.xt@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-06-07Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2013-05-16video: mxsfb: Add an entry for mx23evk/mx28vk video modesFabio Estevam
Currently the mxsfb driver takes the display timings from the 'videomode' environment variable. Provide an example on how to set 'videomode' for using splash screen on mx23evk and mx28vk boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Marek Vasut <marex@denx.de>
2013-05-11Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
Conflicts: drivers/mtd/nand/mxc_nand_spl.c include/configs/m28evk.h
2013-05-06arm: mxs: Add MXS LCDIF driverMarek Vasut
Add basic LCD driver for i.MX233 and i.MX28. This driver allows framebuffer console and framebuffer logo. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2013-05-06cfb_console: flush FB cache at end of public functionsEric Nelson
Removed internal cache_flush operations and placed a flush of the entire frame-buffer at the end of each public function. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-05-05pxa_lcd: make lcd_enable() a weak pointerMike Dunn
Make lcd_init() a weak pointer so that boards can overload it if necessary. The palmtreo680 board needs to wiggle some gpios and configure the pwm controller in order to get the lcd and its backlight working. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
2013-05-05pxa_lcd: add the ACX544AKN lcd deviceMike Dunn
This adds the definitions required to support the LCD device on the Palm Treo 680. Signed-off-by: Mike Dunn <mikedunn@newsguy.com>