summaryrefslogtreecommitdiff
path: root/include/configs/gw_ventana.h
AgeCommit message (Collapse)Author
2017-05-22Convert CONFIG_CMD_HDMIDETECT to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_HDMIDETECT Note that we cannot do 'default y if VIDEO' because this option is only enabled for a small subset of mx6 boards. Also this command is is not a great implementation (it doesn't use driver model). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-22Convert CONFIG_CMD_GSC to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_GSC Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22Convert CONFIG_CMD_EECONFIG to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_EECONFIG Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22Convert CONFIG_SPL_BOARD_INIT to KconfigLey Foon Tan
This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-15Kconfig: USB: Migrate existing USB_EHCI_xxx optionsTom Rini
The following options are migrated over fully now: - USB_EHCI_ATMEL - USB_EHCI_MARVELL - USB_EHCI_MX6 - USB_EHCI_MX7 - USB_EHCI_MSM - USB_EHCI_ZYNQ - USB_EHCI_GENERIC This also requires fixing the depends on USB_EHCI_MARVELL as it's used by Orion5X and Kirkwood as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to KconfigTom Rini
Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-15Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCDTom Rini
In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-04-30Convert CONFIG_CMD_BMODE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_BMODE Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Make this default y and depend on mx5/6/7] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-30power: Drop CONFIG_I2C_PMICSimon Glass
This is only used by one board and should not be a CONFIG option. Instead it should use the driver model pmic framework. For now, just move the setting into the only board that uses it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-12imx: ventana: config: set MMC env Partition to 1Tim Harvey
Partition 1 equates to EMMC boot0 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20imx: ventana: config: add EMMC boot optionsTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20imx: ventana: add GW560x supportTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-20imx: ventana: add GW5904 supportTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-19imx: ventana: add EMMC configurationTim Harvey
Prepare for boards with EMMC instead of NAND flash Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-19imx: ventana: use mmc_root in boot scriptsTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-03-19imx: ventana: config: add gzwrite supportTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-01-25Convert CONFIG_BOARD_EARLY_INIT_F to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-28pci: Move CONFIG_PCI_PNP to KconfigBin Meng
Introduce CONFIG_PCI_PNP in Kconfig and move over boards' defconfig to use that. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Re-generate configs and include/configs/ changes] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-28drivers/pci/Kconfig: Add PCITom Rini
Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-23Convert CONFIG_USB_KEYBOARD to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_USB_KEYBOARD Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup MPC86* configs] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23Convert CONFIG_VGA_AS_SINGLE_DEVICE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VGA_AS_SINGLE_DEVICE Once we migrate to driver model for video, we should be able to drop this option. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-23Convert CONFIG_CFB_CONSOLE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CFB_CONSOLE Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-23Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV CONFIG_CONSOLE_MUX Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Re-order, re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23Convert CONFIG_VIDEO to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-10-15spl: move FDT_FIXUP_PARTITIONS to KconfigHeiko Schocher
Move FDT_FIXUP_PARTITIONS to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-15spl: move SPL_OS_BOOT to KconfigHeiko Schocher
Move SPL_OS_BOOT to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-12common: Add DISPLAY_BOARDINFOLokesh Vutla
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26kconfig: introduce kconfig for UBIHeiko Schocher
move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-16Convert CONFIG_SPL_POWER_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_NAND_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_MMC_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_EXT_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-09configs: Migrate CONFIG_USB_STORAGETom Rini
In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-06imx: ventana: enable splashscreen supportTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: make hwconfig initialize based on board configurationTim Harvey
The hwconfig env var allows user to control hardware specific configuration of board specific features but not all Ventana boards have the same features. We will use the magic default value of "_UNKNOWN_" to signify that the bootloader should create this based on detected board model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: re-enable late board info displayTim Harvey
3b1f681131149b5f62602f582a7e60b0185a2a49 caused a regression that removes board info dispaly for Gateworks Ventana boards because it made the invalid assumption that CONFIG_DISPLAY_BOARDINFO_LATE was the same thing as CONFIG_DISPLAY_BOARDINFO. Ventana needs to call show_board_info in late init because we need to have the i2c eeprom based model info. Re-define CONFIG_DISPLAY_BOARDINFO_LATE to allow that to happen. Cc: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-07-28imx: ventana: default pci to disabledTim Harvey
The IMX6 PCIe host controller does not have a proper reset and as such there are several issues that can arise if PCI is enabled in the bootloader follwed by Linux trying to re-configure LTSSM and/or toggling PERST# to the devices. For now, the best approach seems to default to disabling PCI by defaulting pciedisable=1. This can be overridden by the user if they need PCI in the bootloader, for example: - GW552x needing ethernet access in bootloader - GW16082 expansion board needing a device-tree fixup for irq mapping Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31imx: ventana: config: add PREBOOT supportTim Harvey
This allows the 'preboot' env variable to be executed prior to bootcmd if defined. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31imx: ventana: config: use explicit addr in loadscriptTim Harvey
If we are loading a script to ${loadaddr} then we need to use that address explicitly when calling the source command in case user has changed loadaddr Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31imx: ventana: config: use fs env var for block dev filesystem typeTim Harvey
In order to make the default boot scripts more flexible, use the variable 'fs' to specify the filesystem type to use for block storage devices (USB/MMC/SATA) when loading files. Additionally default this to ext4 and enable ext4 filesystem support (which encompasses ext2 support) instead of just ext2 support. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31imx: ventana: config: use bootdir env var for directory of fdt filesTim Harvey
In order to make the default boot scripts more flexible, use the variable 'bootdir' to specify the filesystem directory to look for fdt files in. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31imx: ventana: config: add fixfdt script to apply manual fdt fixupsTim Harvey
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-31imx: ventana: config: add env vars for disk and partTim Harvey
In order to make the default boot scripts more flexible, use the variable 'disk' to specify the disk device number and the variable 'part' to specify the partition number. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24imx: ventana: remove SPL_EXT_SUPPORTTim Harvey
Remove SPL_EXT_SUPPORT to resolve build issue. It may be useful to bring it back in the future after comparing its merits to storing the args/kernel in fixed raw locations. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24imx: ventana: use EEPROM register for falcon boot modeTim Harvey
NAND+MMC env support costs 12KB in the SPL which is fairly expensive just for the ability to specify whether or not to boot to uboot or directly to linux. The Ventana boards have plenty of EEPROM storage so we will use a byte there to signify if we should boot to the bootloader or to the OS. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-05-24imx: ventana: config: remove redundant configTim Harvey
remove redundant define that exists in mx6_common.h Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-04-25configs: Re-sync with cmd/KconfigTom Rini
Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25configs: Re-sync almost all of cmd/KconfigTom Rini
This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-20usb: gadget Move: CONFIG_G_DNL_* to KconfigSam Protsenko
And also reformat defconfigs using "make savedefconfig" rule. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2016-04-20usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to KconfigSam Protsenko
While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some config headers. This is also probably fixes am335x_baltos board. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
generated by cgit v0.10.2 at 2024-06-03 00:40:36 (GMT)