summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2008-01-0985xx: Remove cache config from configs.hKumar Gala
Either use the standard defines in asm/cache.h or grab the information at runtime from the L1CFG SPR. Also, minor cleanup in cache.h to make the code a bit more readable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-09mpc85xx: Add support for ATUM8548 (updated)robert lazarski
Add support for Instituto Atlantico's ATUM8548 board Signed-off-by: robert lazarski <robertlazarski@gmail.com>
2008-01-09mpc85xx: Add support for SBC8548 (updated)Joe Hamman
Add support for Wind River's SBC8548 reference board. Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
2008-01-09trivial: fix consequences of a bad mergeGuennadi Liakhovetski
Fix what looks like a merge artifact. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-01-09fix comments with new drivers organizationMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-01-09Improve configuration of FPGA subsystemMatthias Fuchs
This patch removes the FPGA subsystem configuration through the CONFIG_FPGA bitmask configuration option. See README for the new options: CONFIG_FPGA, CONFIG_FPGA_<vendor>, CONFIG_FPGA_<family> Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-09Coding Style cleanup, update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-09Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk
2008-01-09Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xxWolfgang Denk
2008-01-09Merge branch 'master' of /home/wd/git/u-boot/master/Wolfgang Denk
2008-01-09Merge branch 'lwmon5-no-ocm'Stefan Roese
2008-01-09ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymoreStefan Roese
This patch configures the LWMON5 port to use d-cache as init-ram and the unused GPT0_COMP6 as POST WORD storage. Signed-off-by: Stefan Roese <sr@denx.de>
2008-01-09Fix problems with usb storage devices on MPC5200 /TQM5200Markus Klotzbücher
The MPC5200 OHCI controller operates in big endian, so CFG_OHCI_BE_CONTROLLER must be defined for it to work properly. Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2008-01-09ppc4xx: Disable error message when no NAND chip is installed on PMC440Matthias Fuchs
Add CFG_NAND_QUIET_TEST option to disable error message when no NAND chip is installed on PMC440 boards. Disable a couple of config defines that are only used for NAND_U_BOOT. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2008-01-08Merge branch 'inka4x0-ng' of /home/m8/git/u-boot/Wolfgang Denk
2008-01-08mpc83xx: convert to using do_fixup_*()Kim Phillips
convert to using simpler mpc85xx style fdt update code; streamline by eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm the old school FLAT_TREE code from 83xx (since the sbc8349 was just converted over to using libfdt). Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-08sbc8349: enable libfdt by default on WRS SBC8349 board.Paul Gortmaker
Make libfdt the default for the WRS SBC8349 board. Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef done for the other 83xx based boards. Also fix a typo in CONFIG_PCI. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-01-08mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)Kim Phillips
continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-08Remove CONFIG options related to OF that we dont useKumar Gala
The MPC8360E MDS config defined: CONFIG_OF_HAS_BD_T CONFIG_OF_HAS_UBOOT_ENV Which we don't use or ever needed. This seems like copy-paste feature creep. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-08mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837xKim Phillips
Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x. This change guarantees that the environment will be located on the first flash sector after the U-Boot image. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-08mpc83xx: Add the support of MPC837xEMDS boardDave Liu
The MPC837xEMDS board support: * DDR2 400MHz hardcoded and SPD init * Local bus NOR Flash * I2C, UART, MII and RTC * eTSEC RGMII * PCI host Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-01-0883xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitionsTimur Tabi
Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the currently-defined 83xx boards. This change guarantees that the environment will be located on the first flash sector after the U-Boot image. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-01-07Merge with git://www.denx.de/git/u-boot.gitPeter Pearse
2008-01-05Merge branch 'katmai-ddr-gda'Stefan Roese
2008-01-05ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setupStefan Roese
On Katmai the complete auto-calibration somehow doesn't seem to produce the best results, meaning optimal values for RQFD/RFFD. This was discovered by GDA using a high bandwidth scope, analyzing the DDR2 signals. GDA provided a fixed value for RQFD, so now on Katmai "only" RFFD is auto-calibrated. This patch also adds RDCC calibration as mentioned on page 7 of the AMCC PowerPC440SP/SPe DDR2 application note: "DDR1/DDR2 Initialization Sequence and Dynamic Tuning" Signed-off-by: Stefan Roese <sr@denx.de>
2008-01-04ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat boardLawrence R. Johnson
Signed-off-by: Larry Johnson <lrj@acm.org>
2008-01-04ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia boardLawrence R. Johnson
Note: this patch changes the configuration of some GPIO registers: Register Old Value New Value --------------- ---------- ---------- DCR GPIO0_TCR 0x0000000F 0x0000F0CF DCR GPIO0_TSRH 0x55005000 0x00000000 DCR GPIO1_TCR 0xC2000000 0xE2000000 DCR GPIO1_TSRL 0x0C000000 0x00200000 DCR GPIO1_ISR2L 0x00050000 0x00110000 Signed-off-by: Larry Johnson <lrj@acm.org>
2008-01-03Don't slam #undef DEBUG in the 8641HPCN config file.Jon Loeliger
Doing so prevents it from being individually set and useful in other files. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-03Convert MPC8641HPCN to use libfdt.Jon Loeliger
Assumes the presence of the aliases node in the DTS to locate the ethernet, pci and serial nodes for fixups. Use consistent fdtaddr and fdtfile in environment variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-01-03Merge commit 'wd/master'Jon Loeliger
2007-12-28ppc4xx: Complete PMC440 board supportMatthias Fuchs
This patch brings the PMC440 board configuration file. Finally it enables the PMC440 board support. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-12-28ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updatesMatthias Fuchs
- add EEPROM write protection for esd PLU405 boards. - initialize NAND GPIOs - use correct io accessors - cleanup Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-12-28ppc4xx: Maintenance patch for VOH405 boardsMatthias Fuchs
- add EEPROM write protection - initialize NAND GPIOs - use correct io accessors - slow down I2C clock to 100kHz - enable ext. I2C bus - cleanup Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-12-27Merge branch 'master' of /home/stefan/git/u-boot/u-boot into for-1.3.2-ver2Stefan Roese
2007-12-27Remove CPCI440 boardMatthias Fuchs
This board never left prototyping state and it became a millstone round my neck. So remove it. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-12-27Add configuration file for Korat boardLarry Johnson
This patch supplies the configuration file for the Korat PPC440EPx- processor board. Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27ppc4xx: Move virtual address of POST cache test to bigger addressStefan Roese
On Sequoia & LWMON5 the virtual address of the POST cache test is now moved to a bigger address. This enables usage of more memory on those boards. Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27ppc4xx: Update Makalu fdt supportStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27ppc4xx: Add fdt support to AMCC Katmai eval boardStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27ppc4xx: fdt: Cleanup setup of cpu node setupStefan Roese
Now the cpu node setup ("timebase-frequency" and "clock-frequency") is without using the absolute path to the cpu node. This makes it possible to use this U-Boot version with both versions of cpu-node naming "cpu@0" and the former "PowerPC,440EPx@0". Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board configMarkus Klotzbücher
When using dhcp/bootp the "netmask" environment variable is not set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is desireable, so the following patch adds this this option to the board config. Signed-off-by: Markus Klotzbuecher <mk@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27ppc4xx: Bring 4xx fdt support up-to-dateStefan Roese
This patch update the 4xx fdt support. It enabled fdt booting on the AMCC Kilauea and Sequoia for now. More can follow later quite easily. Signed-off-by: Stefan Roese <sr@denx.de>
2007-12-27Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2007-12-27Some configuration updates for the TQM5200 based TB5200 board:Martin Krause
- enable command line history - increase malloc space (because of bigger flash sectors) Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27TQM8xx: use the CFI flash driver on all TQM8xx boardsMartin Krause
Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27TQM885D: adjust for doubled flash sector size + some minor fixesMartin Krause
Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27TQM885D: Exchanged SDRAM timing by a more relaxed timing.Jens Gehrlein
CAS-Latency=2, Write Recovery Time tWR=2 The max. supported bus frequency is 66 MHz. Therefore, changed threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz. Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27TQM885D: use calculated cpuclk instead of measuring itMartin Krause
On the TQM885D the measurement of cpuclk with the PIT reference timer ist not necessary. Since all module variants use the same external 10 MHz oscillator, the cpuclk only depends on the PLL configuration - which is readable by software. Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27TQM885D: fix SDRAM refreshJens Gehrlein
At 133 MHz the current SDRAM refresh rate is too fast (measured 4 * 1.17 us). CFG_MAMR_PTA changes from 39 to 128. This result in a refresh rate of 4 * 7.8 us at the default clock 66 MHz. At 133 MHz the value will be then 4 * 3.8 us. This is a compromise until a new method is found to adjust the refresh rate. Signed-off-by: Martin Krause <martin.krause@tqs.de>
2007-12-27TQM860M: Support for 10col SDRAMs, max. 128 MiBJens Gehrlein
Signed-off-by: Martin Krause <martin.krause@tqs.de>
generated by cgit v0.10.2 at 2024-08-07 22:45:26 (GMT)