summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2018-01-17clean-up and variable updatevojo
2018-01-09M.2 SATA testedvojo
2017-12-27grapeboard BCD initial support and clean-upvojo
2017-12-20grapeboard Kconfig clean-up and PBL updatevojo
2017-12-19Grapeboard support addedvojo
2017-10-30ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDSAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-10-13armv8: configs: ls1012a: correct the generic timer frequency issueYuantian Tang
On ls1012a soc, core clock source frequency is 100Mhz. Generic timer frequency is derived from core clock source divided by 4, which is 25Mhz. So assign timer frequency to 25Mhz here. Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
2017-10-11configs: ls1012a: add pfe configuration for LS1012ACalvin Johnson
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
2017-10-11board: freescale: ls1012a: enable network support on ls1012a platformsCalvin Johnson
Ethernet support on all three LS1012A platforms(FRDM, QDS and RDB) is enabled with this patch. eth.c files for all 3 platforms contain board ethernet initialization function and also function to reset phy. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
2017-10-11armv8: ls1088a: Update MC boot sequenceBogdan Purcareata
The MC boot sequence is contained in mc_env_boot. Update LS1088A boards to use this function, and hook it to reset_phy so that it's called late enough, after the ports have been initialized, for proper DPC / DPL fixup. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
2017-09-28arm64: ls2088ardb: Fix nor fall back option failureVinitha Pillai-B57223
Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
2017-09-19armv8: ls1046aqds: Fix NAND offset for Fman ucode and envGong Qianyu
Fix a bug of 'commit 8104deb2d6b7 ("armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1046A")' as NAND block size is 256KB on LS1046AQDS. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
2017-09-19arm64: ls2088ardb: Fix kernel validation failureVinitha V Pillai
Add a variable $kernelheader_addr_r used in distroboot to validate kernel image as its absence caused kernel validation failure Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
2017-09-13ls1088aqds: Enable IFC and QIXIS in SPL imageSumit Garg
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-09-11arm64: ls1012ardb: Add distro secure boot supportSumit Garg
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to qspi boot in case of secure boot. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com>
2017-09-08arm64: ls1012afrdm: Add distro boot supportRajesh Bhagat
Include common config_distro_defaults.h and config_distro_bootcmd.h for u-boot enviroments to support automatical distro boot which scan boot.scr from external storage devices(e.g. SD and USB) and execute autoboot script. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-09-08arm64: ls1012ardb: Add distro boot supportRajesh Bhagat
Include common config_distro_defaults.h and config_distro_bootcmd.h for u-boot enviroments to support automatical distro boot which scan boot.scr from external storage devices(e.g. SD and USB) and execute autoboot script. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-09-07board/ls2080ardb: Add mcmemsize variable in default envPriyanka Jain
For most of ls2080ardb use-cases, mc private DRAM block is required to be of 1.75GB. Hence set mcmemsize=0x70000000 in default env Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2017-09-07board/freescale: Share qbman init between archsAhmed Mansour
This patch adds changes necessary to move functionality present in PowerPC folders with ARM architectures that have DPAA1 QBMan hardware - Created new board/freescale/common/portals.c to house shared device tree fixups for DPAA1 devices with ARM and PowerPC cores - Added new header file to top includes directory to allow files in both architectures to grab the function prototypes - Port inhibit_portals() from PowerPC to ARM. This function is used in setup to disable interrupts on all QMan and BMan portals. It is needed because the interrupts are enabled by default for all portals including unused/uninitialised portals. When the kernel attempts to go to deep sleep the unused portals prevent it from doing so Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
2017-09-04arm64: ls1088ardb: Add distro secure boot supportPrabhakar Kushwaha
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-09-04arm64: ls2088ardb: Add distro secure boot supportVinitha Pillai-B57223
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd. Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com>
2017-09-04armv8: ls1012a: Memory Map modification of kernel,envBhaskar Upadhaya
This patch adjusts memory map for images on LS1012A as per below memory map: Image Flash Offset RCW+PBI 0x00000000 Boot firmware (U-Boot) 0x00100000 Boot firmware Environment 0x00300000 Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
2017-09-04armv8: ls1088a: Enable PCIe in defconfigsHou Zhiqiang
Enabled PCIe support and PCI command feature. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
2017-09-03arm64: ls2080ardb: Add sd_bootcmd for distro fallback in case of sdbootShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-09-03armv7: ls1021atwr: Add sd_bootcmd for distro fallback in case of sdbootShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-09-03arm64: ls1046ardb: Add sd_bootcmd for distro fallback in case of sdbootShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-09-03arm64: ls1043ardb: Add sd_bootcmd for distro fallback in case of sdbootShengzhou Liu
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
2017-08-30ls1088a: Add VID support for QDS and RDB platformsPrabhakar Kushwaha
This patch adds the support for VID on LS1088AQDS and LS1088ARDB systems. It reads the fusesr register and changes the VDD accordingly by adjusting the voltage via LTC3882 regulator. This patch also takes care of the special case of 0.9V VDD is present in fusesr register. In that case,it also changes the SERDES voltage by disabling the SERDES, changing the SVDD and then re-enabling SERDES. Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-30board: common: vid: Add support for LTC3882 voltage regulator chipPrabhakar Kushwaha
Restructures common driver to support LTC3882 voltage regulator chip. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2017-08-29arm64: ls1046ardb: Add distro secure boot supportSumit Garg
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to qspi boot in case of secure boot. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com>
2017-08-29arm64: ls1043ardb: Add distro secure boot supportSumit Garg
Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to nor/qspi boot in case of secure boot. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com>
2017-08-29 LS1088A_QSPI: SECURE_BOOT: Images validationPrabhakar Kushwaha
Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC phase using esbc_validate command. Add images validation in default environment under mcinitcmd prior to MC initialization. Add header address for PPA to be validated during ESBC phase for LS1088A platform based on LAyerscape Chasis 3. Moves sec_init prior to ppa_init as for validation of PPA sec must be initialised before the PPA is initialised. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
2017-08-29ls1088ardb: Add SD Secure boot target supportSumit Garg
Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
2017-08-29armv8: ls1088a: SPL size reductionPrabhakar Kushwaha
Using changes in this patch we were able to reduce approx 8k size of u-boot-spl.bin image. Following is breif description of changes to reduce SPL size: 1. Changes in board/freescale/ls1088a/Makefile to remove compilation of eth.c and cpld.c in case of SPL build. 2. Changes in board/freescale/ls1088a/ls1088a.c to keep board_early_init_f funcations in case of SPL build. 3. Changes in ls1088a_common.h & ls1088ardb.h to remove driver specific macros due to which static data was being compiled in case of SPL build. 4. Enable CONFIG_SYS_DCACHE_OFF in case of SPL build as DCACHE is not being enabled in case of SPL image but was compiled in to add redundant code. Signed-off-by: Sumit Garg <sumit.garg@nxp.com
2017-08-27arm64: ls1088ardb: Add distro boot supportAshish Kumar
Tested on ls1088ardb with automatically boot Ubuntu from SD card or USB disk, if it fails to detect external storage disk, fall back to qspi/sd boot. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Zhang Ying <zhangying@nxp.com>
2017-08-25ls1088aqds: Add SCSI related configs in header file for qdsAshish Kumar
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-25ls1088ardb: Add SCSI related configs in header file for RDBAshish Kumar
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-25ls1088aqds: Enable USB command on QDS for qspi-bootAshish Kumar
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-25ls1088ardb: Enable USB command RDB qspi-bootAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
2017-08-23armv8: ls1088aqds: Add SD boot support for ls1088qdsAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-23armv8: ls1088ardb: Add SD boot support for ls1088Ashish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-23armv8: ls1088aqds: Add support of LS1088AQDSAshish Kumar
This patch add support of LS1088AQDS platform. The LS1088A QorIQTM Development System (QDS) is a high-performance computing, evaluation, and development platform that supports the LS1088A QorIQ Architecture processor. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
2017-08-23armv8: ls1088ardb: Add support for LS1088ARDB platformAshish Kumar
LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
2017-08-21arm64: ls1043ardb: Add distro boot supportShengzhou Liu
Include common config_distro_defaults.h and config_distro_bootcmd.h for u-boot enviroments to support automatical distro boot which scan boot.scr from external storage devices(e.g. SD/USB/SATA/SCSI disk) and execute autoboot script. Tested on ls1043ardb with automatically boot Ubuntu from SD card or USB disk, if it fails to detect external storage disk, fall back to nor/qspi boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
2017-08-17armv8: ls2080a: Increase env sector size for qspi bootSantan Kumar
Increase env sector size from 64kb to 256kb for qspi boot Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2017-08-17board/ls2081ardb: Some updates like flash typeSantan Kumar
Patch makes below changes: -Update QSPI flash type As per updated board design, different QSPI flash is connected on boards, hence change QSPI flash type from Micron n25q512a device to spansion s25fs512s device in dts and config. -Update QIXIS_QMAP_MASK value from 0x07 to 0x70 -Update checkboard() display of boot source and board information -Correct DSPI flash config selection -Remove deprecated config : CONFIG_DISPLAY_BOARDINFO_LATE Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2017-08-16arm64: ls2088ardb: Add distro boot supportSantan Kumar
Include common config_distro_defaults.h and config_distro_bootcmd.h for u-boot enviroments to support automatical distro boot which scan boot.scr from external storage devices(e.g. SD/USB/SATA/SCSI disk) and execute autoboot script. Tested on ls2088ardb with automatically boot Ubuntu from SD card or USB disk, if it fails to detect external storage disk, fall back to nor/qspi boot. Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
2017-08-16config: ls1012aqds: Add USB EHCI support for ls1012aqdsRajesh Bhagat
Add USB EHCI support for ls1012aqds platform Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
2017-08-09LS2080ARDB: QSPI boot: Secure Boot image validationVinitha Pillai-B57223
Validates the images in the ESBC phase for LS2088ARDB platform and QSPI boot using esbc_validate command. Add images validation in default environment under mcinitcmd prior to MC initialization. Adds header address for PPA to be validated during ESBC phase for ARCH_LS2088 and QSPI_BOOT. Moves sec_init prior to ppa_init as for validation of PPA sec must be initialised before the PPA is initialised. Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
2017-08-08configs: Remove CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS in all boardsBin Meng
Now that EHCD does not use CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS, remove it in all boards' config files. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
generated by cgit v0.10.2 at 2024-11-11 13:01:09 (GMT)