summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2015-03-06vexpress64: juno: add NOR flash detectionLinus Walleij
This enables the vexpress64 to detect its NOR flash so that we can load kernel etc from it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-06use ASM_NL instead of '; ' for assembler new line character in the macroChen Gang
For some assemblers, they use another character as newline in a macro (e.g. arc uses '`'), so for generic assembly code, need use ASM_NL (a macro) instead of ';' for it. Basically this is the same patch as applied to Linux kernel - http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/include/linux/linkage.h?id=9df62f054406992ce41ec4558fca6a0fa56fffeb but modified a bit to fit in U-Boot. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com>
2015-03-06vexpress64: juno: support SMC9118 ethernetLinus Walleij
This configures the Juno board to enable ethernet using the SMSC9118 ethernet controller found in the board. Tested by TFTP-booting a kernel over ethernet. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-06m68k: Add generic board support for MCF547X/8X and MCF5445XAlison Wang
This patch adds generic board support for MCF547X/8X and MCF5445X. It is based on the patch about common generic board support for M68K architecture sent by Angelo. Signed-off-by: Alison Wang <alison.wang@freescale.com>
2015-03-06m68k: add generic-board supportangelo@sysam.it
Add generic-board support for the m68k architecture. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2015-03-06m68k: add amcore board supportangelo@sysam.it
Add Sysam Amcore m68k-based board support. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2015-03-06Adding Support for BAV335x boardsGilles Gameiro
2015-03-06omap3: add support for QUIPOS Cairo board.Albert ARIBAUD \(3ADEV\)
This patch extends OMAP3 support for AM/DM37xx and introduces the AM3703-based Quipos Cairo board. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-06board/BuR/kwb: Redesign default-environmentHannes Petermaier
Due to several changes in the boot-process we do a complete redesign of the default environment. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/kwb: Support booting LinuxHannes Petermaier
For series testing purpose we need to boot some linux, therefore we enable the needed features - bootz - devicetree Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/kwb: switch to board HW-Rev3Hannes Petermaier
The board has been redesigned, therefore we need from now other I/O Pins to mux and handle. Older boards aren't supported from now anymore. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/tseries: Rework default-environment settings.Hannes Petermaier
Due to several changes of the boot-process we've redesigned the default- environment settings completly. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/common: Add support for displaying BMP on LCDHannes Petermaier
Customer wants to display some logo very quickly after power on, so we support from now loading a compressed bmp.gz to the screen. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/common: Enable CONFIG_CMD_TIMEHannes Petermaier
time measurement of u-boot commands is needed very often during development. We add this feature until development is completed. Maybe forever :) Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/common: Introduce Network Console and common environment for itHannes Petermaier
It is often necessary to "break in" into boards bootloader commandline if something fails or even for development purposes some parameters have to be changed. So we enable u-boot's CONFIG_NETCONSOLE feature. We also modify Networksettings to apply with this new use-case. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/tseries: Enable EXT4 supportHannes Petermaier
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/tseries: Enable U-Boot BOOTCOUNT featureHannes Petermaier
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/tseries: Enable HW-WatchdogHannes Petermaier
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06board/BuR/common: Take usage of am335x LCD-DisplayHannes Petermaier
a summary screen to the lcd. Values are taken from environment and or devicetree blob. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2015-03-06arm: spear: Move to generic board supportStefan Roese
Without this change the board support for these SPEAr boards would be dropped soon. Generic board support seems to work just fine. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vipin Kumar <vk.vipin@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-03-05arm, da8xx: convert ipam390 board to generic board supportHeiko Schocher
enable generic board support for the ipam390 board. Signed-off-by: Heiko Schocher <hs@denx.de>
2015-03-05woodburn: Convert to generic boardStefano Babic
Boards need to select CONFIG_SYS_GENERIC_BOARD in order to prevent removal from the project. Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-03-05mx35pdk: Convert to generic boardStefano Babic
Boards need to select CONFIG_SYS_GENERIC_BOARD in order to prevent removal from the project. Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-03-05flea3: Convert to generic boardStefano Babic
Boards need to select CONFIG_SYS_GENERIC_BOARD in order to prevent removal from the project. Signed-off-by: Stefano Babic <sbabic@denx.de>
2015-03-05fsl_sec.h: Fix thinkoTom Rini
In 0200020 we added a number of tests for 'if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)' and accidentally did one as 'ifdef defined...' Signed-off-by: Tom Rini <trini@konsulko.com>
2015-03-05Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2015-03-05mx5: fix get_reset_causeStefano Babic
commit d9f43c8f5c1d7ed27c99a06be85a4bb64b2c73fb sets get_reset_cause() as static, but this conflicts with mx5 where its prototype is in sys_proto.h. Drop it from sys_proto.h and drop print_cpuinfo from mx53_loco, factorizing the call for this board. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jason Liu <jason.hui@linaro.org>
2015-03-04ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACKSimon Glass
Currently in some cases SDRAM init requires global_data to be available and soon this will not be available prior to board_init_f(). Adjust the code paths in these cases to be correct. In some cases we had the SPL stack be in DDR as we might have large stacks (due to Falcon Mode + Environment). In these cases switch to CONFIG_SPL_STACK_R. In other cases we had simply been setting CONFIG_SPL_STACK into SRAM. In these cases we no longer need to (CONFIG_SYS_INIT_SP_ADDR is used and is also in SRAM) so drop those lines. Signed-off-by: Simon Glass <sjg@chromium.org> Tested on Beagleboard, Beagleboard xM Tested-by: Matt Porter <mporter@konsulko.com> Tested on Beaglebone Black, AM43xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-04Make export interface support CONFIG_SYS_MALLOC_SIMPLESimon Glass
When CONFIG_SYS_MALLOC_SIMPLE is defined, free() is a static inline. Make sure that the export interface still builds in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-04dm: tegra: Enable driver model in SPL and adjust the GPIO driverSimon Glass
Use the full driver model GPIO and serial drivers in SPL now that these are supported. Since device tree is not available they will use platform data. Remove the special SPL GPIO function as it is no longer needed. This is all in one commit to maintain bisectability. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-04Odroid U3: use common code for dram reservationPrzemyslaw Marczak
This commit removes the dram reservation from board file, because it is done in a common code. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-03-04Odroid-XU3: enable the last dram bank and reserve 22MiBPrzemyslaw Marczak
This commit enables the last DRAM bank and reserves the last 22 MiB of it, for the secure firmware. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Hyungwon Hwang <human.hwang@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-03-02Merge branch 'xnext/zynqmp' of git://www.denx.de/git/u-boot-microblazeTom Rini
2015-03-02arm64: Add Xilinx ZynqMP supportMichal Simek
Add basic Xilinx ZynqMP arm64 support. Serial and SD is supported. It supports emulation platfrom ep108 and QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-03-02atngwmkii: convert to generic boardAndreas Bießmann
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-03-02Merge git://git.denx.de/u-boot-usbTom Rini
2015-03-02Merge git://git.denx.de/u-boot-pxaTom Rini
2015-03-02warp: Select BOUNCE_BUFFER and CMD_EXT optionsFabio Estevam
Add EXT2/EXT4 and BOUNCE_BUFFER support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-03-02warp: Add USB Mass Storage supportFabio Estevam
With UMS support we are able to flash the eMMC from U-boot, which is very convenient. Add UMS support to make the eMMC flashing process easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2015-03-02pxa: colibri_pxa270: integrate latest validated register settingsMarcel Ziswiler
Integrate latest validated register settings from Toradex WinCE BSP 4.2 working accross all module versions from early V1.x, V1.2D, V2.2B to V2.4A. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02pxa: colibri_pxa270: remove CONFIG_ENV_ADDR_REDUNDMarcel Ziswiler
Usually not required for NOR flash. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02pxa: colibri_pxa270: fix wrong comment about voipac ethernet chipMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02pxa: colibri_pax270: fix CONFIG_BOOTCOMMANDMarcel Ziswiler
While 'mmc init' is no longer required the address to bootm the kernel from NOR flash was wrong. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02pxa: colibri_pxa270: avoid overwriting factory configuration blockMarcel Ziswiler
Specify a CONFIG_BOARD_SIZE_LIMIT of 256 KB in order to avoid overwriting the factory configuration block located at offset 0x40000 in NOR flash. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02pxa: colibri_pxa270: disable loadb/s commands and long helpMarcel Ziswiler
To save more than 20 KB of precious space in NOR flash get rid of the following configuration options: CONFIG_CMD_LOADB CONFIG_CMD_LOADS CONFIG_SYS_LONGHELP Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02pxa: colibri_pxa270: migrate to generic boardMarcel Ziswiler
Migrate Toradex Colibri PXA270 to use CONFIG_SYS_GENERIC_BOARD. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-03-02pxa: balloon3/colibri_pxa270: fix environment optionally being nowhereMarcel Ziswiler
I couldn't quite figure out whether or not CONFIG_SYS_ENV_IS_NOWHERE actually ever worked but nowadays this is called CONFIG_ENV_IS_NOWHERE. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02pxa: balloon3: fix comment about sdram banksMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02pxa: balloon3: remove nowhere used symbol CONFIG_SYS_MEM_BUF_IMPMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2015-03-02remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZMarcel Ziswiler
Basically finish what the following commit started a long time ago: 488f5d8790c451fc527fe5d2ef218f2a5e40ea17 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> For mx35pdk/woodburn: Acked-by: Stefano Babic <sbabic@denx.de>
generated by cgit v0.10.2 at 2024-08-14 23:59:29 (GMT)