summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2017-07-08powerpc: Partialy restore core of mpc8xxChristophe Leroy
CS Systemes d'Information (CSSI) manufactures 8xx boards for critical communication systems. Those boards have been running U-Boot since 2010 and will have to be maintained until at least 2027. commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f ("powerpc, 8xx: remove support for 8xx") orphaned those boards by removing support for the mpc8xx CPU. This commit partially restores support for the 8xx, with the following limitations: - Restores support for MPC866 and MPC885 only - Does not restore IDE, PCMCIA, I2C, USB - Does not restore examples - Does not restore POST - Does not restore Ethernet on SCC - Does not restore console on SCC - Does not restore bedbug and kgdb support As the 866 and 885 do not support the following features, they are not restored either: - VIDEO / LCD - RTC clock The CPM uCODE patch is not restored either, because: - 866 and 885 already have support for I2C and SPI relocation without a uCODE patch - relocation of SMC, I2C or SPI is only needed for using SCCs for Ethernet or QMC The dynamic setup/calculation of clocks is removed, we expect the target being use with the clock and PLPRCR register defined in the configuration. All the clock settings for 8xx prior to 866 is removed as well as we now only support 866 and 885. This code is mature and addresses mature boards. Therefore all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif' is unneeded. The following files are not restored by this patch: - arch/powerpc/cpu/mpc8xx/bedbug_860.c - arch/powerpc/cpu/mpc8xx/fec.h - arch/powerpc/cpu/mpc8xx/kgdb.S - arch/powerpc/cpu/mpc8xx/plprcr_write.S - arch/powerpc/cpu/mpc8xx/scc.c - arch/powerpc/cpu/mpc8xx/upatch.c - arch/powerpc/cpu/mpc8xx/video.c - arch/powerpc/include/asm/status_led.h - arch/powerpc/lib/ide.c - arch/powerpc/lib/ide.h - doc/README.MPC866 - drivers/pcmcia/mpc8xx_pcmcia.c - drivers/rtc/mpc8xx.c - drivers/usb/gadget/mpc8xx_udc.c - drivers/video/mpc8xx_lcd.c - examples/standalone/test_burst.c - examples/standalone/test_burst.h - examples/standalone/test_burst_lib.S - examples/standalone/timer.c - include/mpc823_lcd.h - include/usb/mpc8xx_udc.h - post/cpu/mpc8xx/Makefile - post/cpu/mpc8xx/cache.c - post/cpu/mpc8xx/cache_8xx.S - post/cpu/mpc8xx/ether.c - post/cpu/mpc8xx/spr.c - post/cpu/mpc8xx/uart.c - post/cpu/mpc8xx/usb.c - post/cpu/mpc8xx/watchdog.c Some of the restored files are not located in a proper location. In order to keep traceability of the changes, they will be moved to their correct location and moved to Kconfig in a followup patch. This patch also declares CSSI as point of contact for the update of the 8xx platform, as those boards are the only ones still being maintained on the 8xx area. A later patch will add those boards to the tree. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
2017-07-07board/BuR/brppt1: fix MMC bootHannes Schmelzer
since commit 'd5abcf94c7123167725fc22ace342f0d455093c1' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brppt1 board is broken, with this commit we make our board working again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2017-07-07wdt: Unify option of timeout valueAndy Shevchenko
There is no need to duplicate same option with different name. Kill HW_WATCHDOG_TIMEOUT_MS in favor of WATCHDOG_TIMEOUT_MSECS. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2017-07-06avr32: Retire AVR32 for goodAndy Shevchenko
AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-06serial: make serial_stub_* to static functionsMasahiro Yamada
Add missing static to serial_stub_puts(). Unexport serial_stub_{getc,tstc} because they are used locally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-04Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2017-07-04 Highlights this time: bugfixes. With these changes, OpenBSD should be more happy.
2017-07-03powerpc: remove 4xx supportHeiko Schocher
There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-07-03efi_loader: run CreateEvent() notify function based on flagsJonathan Gray
The UEFI specification states that the tpl, function and context arguments are to be ignored if neither EVT_NOTIFY_WAIT or EVT_NOTIFY_SIGNAL are specified. This matches observed behaviour with an AMI EDK2 based UEFI implementation. Skip calling the notify function if neither flag is present. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Acked-By: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-06-29Merge git://git.denx.de/u-boot-arcTom Rini
2017-06-29ARM: at91: ma5d4: Support both SF and eMMC SoMsMarek Vasut
Discern the SoMs based on the presence of SPI flash to support both variants of the SoM, one booting from SPI NOR and one booting from eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: at91: ma5d4: Switch environment start to eMMCMarek Vasut
The redesigned version of the SoM which was released onto the market does no longer contain SPI flash, but boots from the eMMC. Move the environment storage to the eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: at91: ma5d4: Enable support for booting from eMMCMarek Vasut
The SoM has been redesigned to work around bug in the SoC and is now capable of booting from the eMMC. Add support for booting from eMMC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: at91: ma5d4: Swap SD/MMC controller orderMarek Vasut
The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which is the version available on the market. Swap the controller order to match this and future versions of the SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: at91: ma5d4: Enable DFU and UMSMarek Vasut
Enable DFU and USB mass storage support for the DENX MA5D4 SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com>
2017-06-29ARM: atmel: Rename MA5D4EVKMarek Vasut
The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: Marek Vasut <marex@denx.de>
2017-06-29arc: Add support for HS Development Kit boardAlexey Brodkin
ARC HS Development Kit board is a new low-cost development platform sporting ARC HS38 in real silicon with nice set of features such as: * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz * 4Gb of DDR (we use only lowest 1Gb out of it now) * Lots of DesigWare peripherals * Different connectivity modules: - Synopsys HAPS HT3 - Arduino-compatible connector - MikroBUS This initial commit supports the following peripherals: * UART (DW 8250) * Ethernet (DW GMAC) * SD/MMC (DW Mobile Storage) * USB 1.1 & 2.0 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-29axs10x: Move environment from I2C EEPROM to SD-cardAlexey Brodkin
With deprecation of I2C EEPROM we we left without a permamnent storage for U-Boot environment, but luckily we may simply use SD-card with FAT partition for that. Having environment on SD-card is much more convenient as it allows us to preserve all the settings when moving from one board to another. Moreover instead of 256 bytes of EEPROM we're now virtually unlimited in stuff being placed in environment like complicated scripts etc which are usually required in case of full-scale distros. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-29axs10x: Get rid of both I2C and EEPROM who used to use I2CAlexey Brodkin
With eb5ba3aefdf0 "i2c: Drop use of CONFIG_I2C_HARD" in place we cannot use I2C EEPROM any longer so we're dropping all references to both EEPROM and I2C which was only used for EEPROM. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org>
2017-06-29boards: axs10x, nsim, tb100: Enable cmdline historyAlexey Brodkin
Enable shell commands history on ARC boards for more convenience of users. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-06-29atmel, at91: fix smartweb boardHeiko Schocher
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" smartweb board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
2017-06-28ti816x: Enable ethernet supportTom Rini
The ti816x SoC revision of the ethernet IP block is handled by the "davinci_emac" driver, rather than the "cpsw" driver as done by later members of the family. Enable the relevant plumbing. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-27Merge git://git.denx.de/u-boot-x86Tom Rini
2017-06-27Merge git://www.denx.de/git/u-boot-imxTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/imx6qdl_icore_rqs.h include/configs/imx6ul_geam.h include/configs/imx6ul_isiot.h
2017-06-27Revert "x86: Convert MMC to driver model"Bin Meng
This reverts commit ddb3ac3c716f56cead695444e65a7ba7b0946555. With MMC converted to driver model, SCSI driver is broken due to zero address access at (ops->read) in block_dread() function. The fix (SCSI driver converted to DM) is ready in u-boot-dm branch, but it is too late for this relese to get that in. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-23Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini
2017-06-23rockchip: rk3399: correct SPL_MAX_SIZEKever Yang
The SPL_MAX_SIZE is the internal memory size minux the space used by bootrom. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-23atmel, at91: fix corvus boardHeiko Schocher
since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support" corvus board comes not up anymore. Fix it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-23arm: omap: Extract OMAP5 boot environment to separate fileSemen Protsenko
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-22x86: Remove CONFIG_USB_MAX_CONTROLLER_COUNTBin Meng
As all x86 boards have been switched over to use DM USB, remove CONFIG_USB_MAX_CONTROLLER_COUNT which is not used by DM USB. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2017-06-22x86: minnowmax: Configure GPIO pins to turn on USB ports VBUSBin Meng
GPIO bank E pin 8 & 9 are used to control the on-board two USB ports VBUS on/off. Let's configure them in the misc_init_r(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2017-06-21Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2017-06-20arm: zynq: Move CONFIG_SF_DUAL_FLASH to defconfigMike Looijmans
Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the associated topic_miamiplus.h header obsolete, so remove that as well. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Check pmufw versionMichal Simek
If PMUFW version is not v0.3 then panic. ZynqMP switch to CCF based clock driver which requires PMUFW to be present at certain version. This patch ensure that you use correct and tested PMUFW binary. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Decrease MALLOC size for SPLMichal Simek
Decrease malloc size to 1MB from 256MB. Huge malloc space is adding huge delay in mem_malloc_init() because we are enabling CONFIG_SYS_MALLOC_CLEAR_ON_INIT which clear the whole malloc space. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: Remove CPU_RELEASE_ADDR macroMichal Simek
CPU_RELEASE_ADDR is used only when CONFIG_ARMV8_MULTIENTRY is enabled. ZynqMP is running ATF which takes care about this that's why no need to have this macro. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19odroid: remove CONFIG_DM_I2C_COMPAT configJaehoon Chung
Remove the CONFIG_DM_I2C_COMPAT config. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-06-16powerpc, 5xx: remove some "5xx" remainsHeiko Schocher
we removed 5xx support. So delete some forgotten remains. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 82xx: remove some missed mpc82xx remainsHeiko Schocher
we removed 82xx support. Missed some 82xx remains, remove them now. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16arm: ti: Add missing guards to headersSemen Protsenko
To prevent possible double inclusions in future. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: refactor default environmentHannes Schmelzer
For better readability and setup-handling we refactor the default environment. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: cosmetic cleanup of config-headerHannes Schmelzer
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop obsolete CONFIG_LCD_NOSTDOUT from config-headerHannes Schmelzer
This define isn't used anymore in the u-boot source tree, so we drop it from the config header. We drop it also from the 'config_whitelist.txt' Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop bootlogo featureHannes Schmelzer
the BMP logo loading has become obsolete and is not used any more. So we drop the support for it. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: fix MMC bootHannes Schmelzer
since commit 'd5abcf94c7123167725fc22ace342f0d455093c1' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brxre1 board is broken, with this commit we make our board working again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-16include: nand: move endif to end of fileMugunthan V N
The terminator endif of ifdef _NAND_H_ should be at the end of file as a fail safe. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-06-14Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2017-06-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2017-06-12ARM: tegra: remove Whistler supportStephen Warren
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v0.10.2 at 2024-07-02 07:04:27 (GMT)