summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2010-02-12add a new AT91 GPIO driverJens Scharsig
* add a real AT91 GPIO driver instead of header inline code * resolve the mixing of port and pins * change board config files to use new driver * add macros to gpio to realize backward compatibility Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-12add c structures for SoC accessJens Scharsig
* add's c structures for SoC access to pheriperials head files Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-12add new CONFIG_AT91_LEGACYJens Scharsig
* add's the new temporary CONFIG_AT91_LEGACY to all board configs This will need for backward compatiblity, while change the SoC access to c structures. If CONFIG_AT91_LEGACY is defined, the deprecated SoC is used. Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-02-12DA830 EVM: Enable NAND support on Spectrum Digital EVMNick Thompson
The EVM UI extender card has a NAND device. This change will enable saveenv to work with NAND and Linux to be booted using: mtdparts default nboot kernel bootm Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-02-12Davinci: Add EMIF-A macros for setting chip select parametersNick Thompson
The patch adds EMIF-A macros for setting chip select parameters Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-02-12EP93xx: fix syscon_regs definitionAlessandro Rubini
The structure was missing a reserved entry (not listed in the manual, actually), so the last registers had a wrong offset. This prevented all swlocked registers to be modified as swlock is last in the structure. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
2010-02-12ARM: Add support for EP93xx SoCsMatthias Kaehlcke
Add support for the Cirrus EP93xx platform Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Acked-by: Tom <Tom.Rix@windriver.com>
2010-02-12Add support for EDB93xx boardsMatthias Kaehlcke
Added support for the following EDB93xx boards: EDB9301 EDB9302 EDB9302A EDB9307 EDB9307A EDB93012 EDB9315 EDB9315A Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
2010-02-12NetStar: Disable CONFIG_CMD_JFFS2Ladislav Michl
This patch removes "CONFIG_CMD_JFFS" from the board config Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-02-12OMAP3 Move declaration of gpmc_cfg.Tom Rix
Every omap3 board config file declared the global variable gpmc_cfg. This changes moves the declaration to a better location in the arch dependent header file cpu.h. Signed-off-by: Tom Rix <Tom.Rix@windriver.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-02-12at91: Add esd gmbh OTC570 board supportDaniel Gorsulowski
This patch adds support for esd gmbh OTC570 board. The OTC570 is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2010-02-03musb: Add host support for DM365 EVMPrathap Srinivas
Add support for musb host on DM365 EVM. Signed-off-by: Prathap Srinivas <msprathap@ti.com>
2010-02-03Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-02-03Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk
2010-02-03Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk
2010-02-03ppc4xx: Remove unused feature from AR405 boardMatthias Fuchs
This patch fixes building for AR405 boards by remove an unused feature. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2010-02-03ppc4xx: Fix building of PMC440 boardMatthias Fuchs
Remove some unused features and default environment variable to shrink the PMC440 u-boot. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
2010-02-01new at91_emac network driver (NET_MULTI api)Jens Scharsig
* add's at91_emac (AT91RM9200) network driver (NET_MULTI api) * enable driver with CONFIG_DRIVER_AT91EMAC * generic PHY initialization * modify AT91RM9200 boards to use NET_MULTI driver * the drivers has been tested with LXT971 Phy and DM9161 Phy at MII and RMII interface Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-02-01Add EP93xx ethernet driverMatthias Kaehlcke
Added ethernet driver for EP93xx SoCs Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-02-0183xx, uec: split enet_interface in two variablesHeiko Schocher
There's no sensible reason to unite speed and interface type into one variable. So split this variable enet_interface into two vars: enet_interface_type, which hold the interface type and speed. Also: add the possibility for switching between 10 and 100 MBit interfaces on the fly, when running in FAST_ETH mode. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-02-01TI: DaVinci: Updating EMAC driver for DM365, DM646x and DA8XXNick Thompson
The EMAC IP on DM365, DM646x and DA830 is slightly different from that on DM644x. This change updates the DaVinci EMAC driver so that EMAC becomes operational on SOCs with EMAC v2. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-02-01tsec: Add TSEC_FIBER flagPeter Tyser
The TSEC_FIBER flag should be set when a PHY is operating with an external fiber interface. Currently it is only used to notify a user that the PHY is operating in fiber mode. A short description was also added to the other TSEC flag defines so that it is clear how they differ from one another. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-02-01tsec: Add support for using the BCM5482 PHY in fiber modePeter Tyser
The BCM5482 PHY supports both copper and fiber as an ethernet medium. By enabling its copper/fiber mode auto-detection feature it can dynamically determine if it should be configured for copper or fiber. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-02-01tsec: Make functions/data static when possiblePeter Tyser
This is generally good practice and saves ~150 bytes. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-27include/nomadik.h: add physical address for cldcAlessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2010-01-27video: add amba-clcd prime-cellAlessandro Rubini
This adds support for the CLCD logic cell. It accepts precompiled register values for specific configuration through a board-supplied data structure. It is used by the Nomadik nhk8815, added by a later patch in this series. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2010-01-27Add MX25 support to nand_spl fsl nfc driverJohn Rigby
MX25 has a different version of the fsl_nfc flash controller known as version 1.1. Add support to the nand_spl fsl_nfc driver Versioning differs from mainline mxc kernel driver no consensus yet on if the naming here and in Redboot or the kernel is "correct". Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Wolfgang Denk <wd@denx.de> CC: Scott Wood <scottwood@freescale.com>
2010-01-27Nand boot: Add nand boot support for MPC8569mds boardLiu Yu
This patch add nand boot support for MPC8569mds board. Signed-off-by: Liu Yu <yu.liu@freescale.com>
2010-01-2786xx: Add support for 'cpu disable' commandKumar Gala
Support disabling of a core via user command 'cpu disable'. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-27Add support to disable cpu's in multicore processorsKumar Gala
Add a disable sub-command to the cpu command that allows for disabling cores in multicore processors. This can be useful for systems that are using multicore chips but aren't utilizing all the cores as a way to reduce power and possibly improve performance. Also updated an added missing copyright. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-26Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk
2010-01-26Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-01-2683xx, kmeter1: fix compile errorHeiko Schocher
- delete double MTDIDS_DEFAULT and MTDPARTS_DEFAULT defines in board config file. - add mising CONFIG_KM_UBI_PARTITION_NAME define Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-26ppc: Use r12 instead of r14 as GOT pointer.Joakim Tjernlund
r14 is not supposed to be clobbered by functions. Switch to r12 and call GET_GOT when needed. This will allow u-boot to loose the -ffixed-r14 gcc option. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-01-26ppc: Loose GOT access in IRQJoakim Tjernlund
Using the GOT in IRQ handlers requires r14 to be -ffixed-r14. Avoid this by relocatate transfer_to_handler too. This will allow to free up r14 later on. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-01-2685xx/p1_p2_rdb: enable hwconfigVivek Mahajan
Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-26ppc/85xx: Add ATM config for MPC8569MDSLiu Yu
Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-26fsl_esdhc: fix wrong clock maskLi Yang
Fix typo in SYSCTL_CLOCK_MASK, which caused residual in high bits of SDCLKFS. Signed-off-by: Jin Qing <B24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25gzip/zlib: make features optionalMike Frysinger
If you really want to slim down U-Boot and you would rather use a higher compression scheme (like LZMA), it'd be nice to disable gzip/zlib since these code bases take up a significant amount of space. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-25mkimage: Add Freescale imx Boot Image support (imximage)Stefano Babic
This patch adds support for "imximage" (MX Boot Image) to the mkimage utility. The imximage is used on the Freescales's MX.25, MX.35 and MX.51 processors. Further details under doc/README.imximage. This patch was tested on a Freescale mx51evk board. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-01-25mpc5xxx: Support CPU internal watchdog.Detlev Zundel
Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-23Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk
2010-01-23at91: Enable slow master clock on meesc boardDaniel Gorsulowski
Normally the processor clock has a divisor of 2. In some cases this this needs to be set to 4. Check the user has set environment mdiv to 4 to change the divisor. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2010-01-23SPEAr : Support added for SPEAr320 boardVipin KUMAR
SPEAr320 SoC support contains basic spear320 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver - emi driver(cfi support) Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr310 boardVipin KUMAR
SPEAr310 SoC support contains basic spear310 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver - emi driver(cfi support) Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : emi controller initialization for CFI driver supportVipin KUMAR
SPEAr310 and SPEAr320 SoCs contain an EMI controller to interface Paraller NOR flashes. This patch adds the support for this IP The standard CFI driver is used to interface with NOR flashes Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr300 boardVipin KUMAR
SPEAr300 SoC support contains basic spear300 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support for HW mac id read/write from i2c memVipin KUMAR
This patch adds the support to read and write mac id from i2c memory. For reading: if (env contains ethaddr) pick env ethaddr else pick ethaddr from i2c memory For writing: chip_config ethaddr XX:XX:XX:XX:XX:XX writes the mac id in i2c memory Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : Support added for SPEAr600 boardVipin KUMAR
SPEAr600 SoC support contains basic spear600 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23SPEAr : usbd driver support for SPEAr SoCsVipin KUMAR
SPEAr SoCs contain a synopsys usb device controller. USB Device IP can work in 2 modes - DMA mode - Slave mode The driver adds support only for slave mode operation of usb device IP. This driver is used along with standard USBTTY driver to obtain a tty interface over USB on the host Signed-off-by: Vipin <vipin.kumar@st.com>