summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2017-05-10string: Use memcpy() within memmove() when we canSimon Glass
A common use of memmove() can be handled by memcpy(). Also memcpy() includes an optimisation for large sizes: it copies a word at a time. So we can get a speed-up by calling memcpy() to handle our move in this case. Update memmove() to call memcpy() if the destination is before the source. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-05lib: circbuf: avoid possible null pointer dereferencexypron.glpk@gmx.de
We should not first dereference p and afterwards assert that is was not NULL. Instead do the assert first. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-04-30Convert CONFIG_CMD_AES et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_AES CONFIG_AES Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add select AES to CMD_AES] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-14Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2017-04-14fdt: Add compatible strings for Arria 10Ley Foon Tan
Add compatible strings for Intel Arria 10 SoCFPGA device. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-04-13Merge git://git.denx.de/u-boot-dmTom Rini
Here with some DM changes as well as the long-standing AT91 DM/DT conversion patches which I have picked up via dm.
2017-04-13fdtgrep: Cope with the /aliases node being lastSimon Glass
With skeleton.dtsi being dropped it is more likely that the /aliases node will be last in the device tree. Update fdtgrep to handle this. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-13lib: div64: sync with LinuxPeng Fan
Sync with Linux commit ad0376eb1483b ("Merge tag 'edac_for_4.11_2'"). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com>
2017-04-13tiny-printf: Add support for %p formatVignesh R
Add support for %p, %pa[p], %pM, %pm and %pI4 formats to tiny-printf. %pM and %pI4 are widely used by SPL networking stack and is required if networking support is desired in SPL. %p, %pa and %pap are mostly used by debug prints and hence supported only when DEBUG is enabled. Before this patch: $ size spl/u-boot-spl text data bss dec hex filename 99325 4899 218584 322808 4ecf8 spl/u-boot-spl After this patch (with CONFIG_SPL_NET_SUPPORT): $ size spl/u-boot-spl text data bss dec hex filename 99666 4899 218584 323149 4ee4d spl/u-boot-spl So, this patch adds ~350 bytes to code size. If CONFIG_SPL_NET_SUPPORT is not enabled, this adds ~25 bytes. If CONFIG_USE_TINY_PRINTF is disabled then: $ size spl/u-boot-spl text data bss dec hex filename 101116 4899 218584 324599 4f3f7 spl/u-boot-spl So, there is still ~1.4K space saved even with support for %pM/%pI4. Compiler used is to build is: arm-linux-gnueabihf-gcc (Linaro GCC 6.2-2016.11) 6.2.1 20161016 Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-12Rename aes.h to uboot_aes.hStefano Babic
aes.h is a too generic name if this file can be exported and used by a program. Rename it to avoid any conflicts with other files (for example, from openSSL). Signed-off-by: Stefano Babic <sbabic@denx.de>
2017-04-10libfdt: fix build with Python 3Stefan Agner
For some reason Python 3 seems to think it does not need to build the library. Using the --force parameter makes sure that the library gets built always. This is especially important since we move the library in the next step of the Makefile, hence forcing a rebuild every time the higher level Makefile triggers a rebuild is required to make sure the library is always there. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-04-10fdt: Bring in changes from v1.4.4Simon Glass
This a few minor changes down from upstream since the last sync. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-07cmd: Expose a Kconfig option to enable UBIFS commandsBoris Brezillon
Create a new Kconfig entry to allow CMD_UBIFS selection from Kconfig and add an hidden LZO option that can be selected by CMD_UBIFS. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jagan Teki <jagan@openedev.com>
2017-04-07mtd: ubi: Select RBTREE option from MTD_UBI Kconfig entryBoris Brezillon
Expose the RBTREE feature through Kconfig and select this option from the MTD_UBI option. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jagan Teki <jagan@openedev.com> [Rebased on master] Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-04-07bch: Allow to build for the hostMaxime Ripard
We will need the bch functions in the tool to generate the SPL images for the Allwinner SoCs. Do the needed adjustments so that we can use it on the host. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-04-05string: Provide a slimmed-down memset()Simon Glass
Most of the time the optimised memset() is what we want. For extreme situations such as TPL it may be too large. For example on the 'rock' board, using a simple loop saves a useful 48 bytes. With gcc 4.9 and the rodata bug, this patch is enough to reduce the TPL image below the limit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
2017-03-26tpm: Add function to load keys via their parent's SHA1 hashmario.six@gdsys.cc
If we want to load a key into a TPM, we need to know the designated parent key's handle, so that the TPM is able to insert the key at the correct place in the key hierarchy. However, if we want to load a key whose designated parent key we also previously loaded ourselves, we first need to memorize this parent key's handle (since the handles for the key are chosen at random when they are inserted into the TPM). If we are, however, unable to do so, for example if the parent key is loaded into the TPM during production, and its child key during the actual boot, we must find a different mechanism to identify the parent key. To solve this problem, we add a function that allows U-Boot to load a key into the TPM using their designated parent key's SHA1 hash, and the corresponding auth data. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-26libfdt: use CONFIG_IS_ENABLED for OF_LIBFDTVignesh R
Use CONFIG_IS_ENABLED() macro to check whether OF_TRANSLATE is enabled, so that code block is compiled irrespective of SPL or U-Boot build and fdt address translation is used. Signed-off-by: Vignesh R <vigneshr@ti.com>
2017-03-20Kconfig: Don't use RSA_FREESCALE_EXP on IMXGeorge McCollister
The CAAM in IMX parts doesn't support public key hardware acceleration (PKHA), so don't use RSA_FREESCALE_EXP. If you try to use it on IMX (assuming you have the clocks enabled first) you will get back an "Invalid KEY Command" error since PKHA isn't a valid key destination for these parts. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-03-17Kconfig: introduce md5sum command selectionAndre Przywara
So far CONFIG_MD5SUM would need to be set by a board's include file. Since the command is really generic, move it over to Kconfig to allow it to be defined by either a board's defconfig, menuconfig or some config snippet merged via mergeconfig.sh. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-16Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2017-03-15tiny-printf: add static to locally used functionsMasahiro Yamada
These two functions are only used in lib/tiny-printf.c . Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-03-14efi: Add a hook to allow adding memory mappingYork Sun
Instead of adding all memory banks, add a hook so individual SoC/board can has its own implementation. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alexander Graf <agraf@suse.de> Reviewed-by: Alexander Graf <agraf@suse.de>
2017-02-06x86: Use unsigned long for address in table generationSimon Glass
We should use unsigned long rather than u32 for addresses. Update this so that the table-generation code builds correctly on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-01lib: tpm: Add command to flush resourcesMario Six
This patch adds a function to the TPM library, which allows U-Boot to flush resources, e.g. keys, from the TPM. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2017-01-28disk: convert CONFIG_ISO_PARTITION to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-14mkimage: Add support for signing with pkcs11George McCollister
Add support for signing with the pkcs11 engine. This allows FIT images to be signed with keys securely stored on a smartcard, hardware security module, etc without exposing the keys. Support for other engines can be added in the future by modifying rsa_engine_get_pub_key() and rsa_engine_get_priv_key() to construct correct key_id strings. Signed-off-by: George McCollister <george.mccollister@gmail.com>
2017-01-14lib: net_utils: enforce '.' as octet separator in string_to_ipChris Packham
Ensure '.' is used to separate octets. If another character is seen reject the string outright and return 0.0.0.0. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2017-01-14lib: net_utils: make string_to_ip stricterChris Packham
Previously values greater than 255 were implicitly truncated. Add some stricter checking to reject addresses with components >255. With the input "1234192.168.1.1" the old behaviour would truncate the address to 192.168.1.1. New behaviour rejects the string outright and returns 0.0.0.0, which for the purposes of IP addresses can be considered an error. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2017-01-14delay: collect {m, n, u}delay declarations to include/linux/delay.hMasahiro Yamada
Currently, mdelay() and udelay() are declared in include/common.h, while ndelay() in include/linux/compat.h. It would be nice to collect them into include/linux/delay.h like Linux. While we are here, fix the ndelay() implementation; I used the DIV_ROUND_UP() instead of (x)/1000 because it must wait *longer* than the given period of time. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-14libfdt: Correct fdt handling of overlays without fixups and base trees ↵David Gibson
without symbols The fdt_overlay_apply() function purports to support the edge cases where an overlay has no fixups to be applied, or a base tree which has no symbols (the latter can only work if the former is also true). However it gets it wrong in a couple of small ways: * In the no fixups case, it doesn't fail immediately, but will attempt fdt_for_each_property_offset() giving -FDT_ERR_NOTFOUND as the node offset, which will fail. Instead it should succeed immediately, since there's nothing to do. * In the case of no symbols, it again doesn't fail immediately. However if there is an actual fixup it will fail with an unexpected error, because -FDT_ERR_NOTFOUND is passed to fdt_getprop() when attempting to look up the symbols. We should instead return -FDT_ERR_NOTFOUND directly. Both of these errors lead to the code returning misleading error codes in failing cases. [ DTC commit: 7d8ef6e1db9794f72805a0855f4f7f12fadd03d3 ] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-01-10Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2017-01-09lib: gitignore *.elf and *.so generated by efi_loaderLadislav Michl
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2017-01-04SPL: tiny-printf: ignore "-" modifierAndre Przywara
tiny-printf does not know about the "-" modifier, which aligns numbers. This is used by some SPL code, but as it's purely cosmetical, we just ignore this modifier here to avoid changing correct printf strings. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-01-04SPL: tiny-printf: add "l" modifierAndre Przywara
tiny-printf does not know about the "l" modifier so far, which breaks the crash dump on AArch64, because it uses %lx to print the registers. Add an easy way of handling longs correctly. Using a relatively decent compiler (GCC 5.3.0) this does _not_ increase the code size of tiny-printf.o for 32-bit builds (where long and int are actually the same), actually it looses three (ARM Thumb2) instructions from the actual SPL (numbers for orangepi_plus_defconfig): text data bss dec hex filename 758 0 0 758 2f6 spl/lib/tiny-printf.o before 18839 488 232 19559 4c67 spl/u-boot-spl before 758 0 0 758 2f6 spl/lib/tiny-printf.o after 18833 488 232 19553 4c61 spl/u-boot-spl after This adds some substantial amount of code to a 64-bit build, though: (taken after a later commit, which enables the ARM64 SPL build for sunxi) text data bss dec hex filename 1542 0 0 1542 606 spl/lib/tiny-printf.o before 25830 392 360 26582 67d6 spl/u-boot-spl before 1758 0 0 1758 6de spl/lib/tiny-printf.o after 26040 392 360 26792 68a8 spl/u-boot-spl after Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-12-20fdt: add memory bank decoding functions for board setupNathan Rossi
Add two functions for use by board implementations to decode the memory banks of the /memory node so as to populate the global data with ram_size and board info for memory banks. The fdtdec_setup_memory_size() function decodes the first memory bank and sets up the gd->ram_size with the size of the memory bank. This function should be called from the boards dram_init(). The fdtdec_setup_memory_banksize() function decode the memory banks (up to the CONFIG_NR_DRAM_BANKS) and populates the base address and size into the gd->bd->bi_dram array of banks. This function should be called from the boards dram_init_banksize(). Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Cc: Simon Glass <sjg@chromium.org> Cc: Michal Simek <monstr@monstr.eu> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-27efi_loader: Allow to compile helloworld.efi w/o bundling itAlexander Graf
Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-21image: Combine image_sig_algo with image_sign_infoAndrew Duda
Remove the need to explicitly add SHA/RSA pairings. Invalid SHA/RSA pairings will still fail on verify operations when the hash length is longer than the key length. Follow the same naming scheme "checksum,crytpo" without explicitly defining the string. Indirectly adds support for "sha1,rsa4096" signing/verification. Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21image: Add crypto_algo struct for RSA infoAndrew Duda
Cut down on the repetition of algorithm information by defining separate checksum and crypto structs. image_sig_algos are now simply pairs of unique checksum and crypto algos. Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21rsa: Verify RSA padding programaticallyAndrew Duda
Padding verification was done against static SHA/RSA pair arrays which take up a lot of static memory, are mostly 0xff, and cannot be reused for additional SHA/RSA pairings. The padding can be easily computed according to PKCS#1v2.1 as: EM = 0x00 || 0x01 || PS || 0x00 || T where PS is (emLen - tLen - 3) octets of 0xff and T is DER encoding of the hash. Store DER prefix in checksum_algo and create rsa_verify_padding function to handle verification of a message for any SHA/RSA pairing. Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21rsa: cosmetic: rename pad_len to key_lenAndrew Duda
checksum_algo's pad_len field isn't actually used to store the length of the padding but the total length of the RSA key (msg_len + pad_len) Signed-off-by: Andrew Duda <aduda@meraki.com> Signed-off-by: aduda <aduda@meraki.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-17ls2080: Exit dpaa only right before exiting U-BootAlexander Graf
On ls2080 we have a separate network fabric component which we need to shut down before we enter Linux (or any other OS). Along with that also comes configuration of the fabric using a description file. Today we always stop and configure the fabric in the boot script and (again) exit it on device tree generation. This works ok for the normal booti case, but with bootefi the payload we're running may still want to access the network. So let's add a new fsl_mc command that defers configuration and stopping the hardware to when we actually exit U-Boot, so that we can still use the fabric from an EFI payload. For existing boot scripts, nothing should change with this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com> [agraf: Fix x86 build]
2016-11-14x86: Enable EFI loader supportSimon Glass
Enable this so that EFI applications (notably grub) can be run under U-Boot on x86 platforms. At present the 'hello world' EFI application is not supported for the qemu-x86_efi_payload64 board. That board builds a payload consisting of a 64-bit header and a 32-bit U-Boot, which is incompatible with the way the EFI loader builds its EFI application. The following error is obtained: x86_64-linux-ld.bfd: i386 architecture of input file `lib/efi_loader/helloworld.o' is incompatible with i386:x86-64 output This could be corrected with additional Makefile rules. For now, this feature is disabled for that board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [agraf: drop hello kconfig bits] Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Add support for a hello world test programSimon Glass
It is useful to have a basic sanity check for EFI loader support. Add a 'bootefi hello' command which loads HelloWord.efi and runs it under U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Fix documentation, add unfulfilled kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14x86: Tidy up selection of building the EFI stubSimon Glass
At present we use a CONFIG option in efi.h to determine whether we are building the EFI stub or not. This means that the same header cannot be used for EFI_LOADER support. The CONFIG option will be enabled for the whole build, even when not building the stub. Use a different define instead, set up just for the files that make up the stub. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Correct cache flush alignmentSimon Glass
Make sure that the cache flushes correctly by ensuring that the end address is correctly aligned. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi_loader: console: Correctly report modesEmmanuel Vadot
Add support for EFI console modes. Mode 0 is always 80x25 and present by EFI specification. Mode 1 is always 80x50 and not mandatory. Mode 2 and above is freely usable. If the terminal can handle mode 1, we mark it as supported. If the terminal size is greater than mode 0 and different than mode 1, we install it as mode 2. Modes can be switch with cout_set_mode. Changes in V5: Correctly detect mode before enabling mode 2. Changes in V4: Reset cursor positon on mode switch Use local variables in console query code Changes in V3: Valid mode are 0 to EFIMode-1 Fix style Changes in V2: Add mode switch Report only the modes that we support Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Use device device path type Messaging for network interface nodeOleksandr Tymoshenko
When adding network interface node use Messaging device path with subtype MAC Address and device's MAC address as a value instead of Media Device path type with subtype File Path and path "Net" Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi_loader: fix depends on line of EFI_LOADERMasahiro Yamada
This line is shown as depends on (ARM64 ||\302\240ARM) && OF_LIBFDT on my Emacs. Use ASCII characters only. Assuming it is (ARM64 || ARM), remove the redundancy. Unlike Linux, CONFIG_ARM includes CONFIG_ARM64 in U-Boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-10-24libfdt: fix fdt_stringlist_search()Masahiro Yamada
If fdt_getprop() fails, negative error code should be returned. [ DTC commit: daa75e8fa5942caa8e97931aed3a1ee0b7edd74b ] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>