summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2015-02-12dm: test: Add a Kconfig fileSimon Glass
Add a file to control driver model test features. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12dm: i2c: Add a dm_ prefix to driver model bus speed functionsSimon Glass
As with i2c_read() and i2c_write(), add a dm_ prefix to the driver model versions of these functions to avoid conflicts. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-01-30Merge branch 'master' of git://git.denx.de/u-boot-dmTom Rini
2015-01-30dm: spi: Move slave details to child platdataSimon Glass
At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-30dm: core: Allow uclass to set up a device's child before it is probedSimon Glass
Some buses need to set up their devices before they can be used. This setup may well be common to all buses in a particular uclass. Support a common pre-probe method for the uclass, called before any bus devices are probed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-30dm: core: Allow the uclass to set up a device's child after bindingSimon Glass
For buses, after a child is bound, allow the uclass to perform some processing. This can be used to figure out the address of the child (e.g. the chip select for SPI slaves) so that it is ready to be probed. This avoids bus drivers having to repeat the same process, which really should be done by the uclass, since it is common. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-30dm: core: Allow uclasses to specify private data for a device's childrenSimon Glass
In many cases the per-child private data for a device's children is defined by the uclass rather than the individual driver. For example, a SPI bus needs to store information about each of its children, but all SPI drivers store the same information. It makes sense to allow the uclass to define this data. If the driver provides a size value for its per-child private data, then use it. Failng that, fall back to that provided by the uclass. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-30dm: core: Add a flag to control sequence numberingSimon Glass
At present we try to use the 'reg' property and device tree aliases to give devices a sequence number. The 'reg' property is often actually a memory address, so the sequence numbers thus-obtained are not useful. It would be better if the devices were just sequentially numbered in that case. In fact neither I2C nor SPI use this feature, so drop it. Some devices need us to look up an alias to number them within the uclass. Add a flag to control this, so it is not done unless it is needed. Adjust the tests to test this new behaviour. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-30dm: core: Add a function to get a device's uclass IDSimon Glass
This is useful to check which uclass a device is in. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-30dm: core: Add a post_bind method for parentsSimon Glass
Allow parent drivers to be called when a new child is bound to them. This allows a bus to set up information it needs for that child. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-30dm: core: Allow uclasses to specify platdata for a device's childrenSimon Glass
In many cases the child platform data for a device's children is defined by the uclass rather than the individual devices. For example, a SPI bus needs to know the chip select and speed for each of its children. It makes sense to allow this information to be defined the SPI uclass rather than each individual driver. If the device provides a size value for its child platdata, then use it. Failng that, fall back to that provided by the uclass. Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-30dm: core: Allow parents to have platform data for their childrenSimon Glass
For buses it is common for parents to need to know the address of the child on the bus, the bus speed to use for that child, and other information. This can be provided in platform data attached to each child. Add driver model support for this, including auto-allocation which can be requested using a new property to specify the size of the data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-30dm: core: Allocate platform data when binding a deviceSimon Glass
When using allocated platform data, allocate it when we bind the device. This makes it possible to fill in this information before the device is probed. This fits with the platform data model (when not using device tree), since platform data exists at bind-time. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-30dm: Don't run tests if U-Boot cannot be builtSimon Glass
There is no point in running the tests if U-Boot cannot be built. Abort in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-30dm: i2c: Provide an offset length parameter where neededSimon Glass
Rather than assuming that the chip offset length is 1, allow it to be provided. This allows chips that don't use the default offset length to be used (at present they are only supported by the command line 'i2c' command which sets the offset length explicitly). Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-01-30dm: i2c: Rename driver model I2C functions to permit compatibilitySimon Glass
Add a dm_ prefix to driver model I2C functions so that we can keep the old ones around. This is a little unfortunate, but on reflection it is too difficult to change the API. We can undo this rename when most boards and drivers are converted to use driver model for I2C. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-30dm: gpio: Add better functions to request GPIOsSimon Glass
At present U-Boot sort-of supports the standard way of reading GPIOs from device tree nodes, but the support is incomplete, a bit clunky and only works for GPIO bindings where #gpio-cells is 2. Add new functions to request GPIOs, taking full account of the device tree binding. These permit requesting a GPIO with a simple call like: gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN); This will request the GPIO, looking at the device's node which might be this, for example: cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>; The GPIO will be set to input mode in this case and polarity will be honoured by the GPIO calls. It is also possible to request and free a list of GPIOs. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29dumpimage: fit: extract FIT imagesGuilherme Maciel Ferreira
The dumpimage is able to extract components contained in a FIT image: $ ./dumpimage -T flat_dt -i CONTAINER.ITB -p INDEX FILE The CONTAINER.ITB is a regular FIT container file. The INDEX is the poisition of the sub-image to be retrieved, and FILE is the file (path+name) to save the extracted sub-image. For example, given the following kernel.its to build a kernel.itb: /dts-v1/; / { ... images { kernel@1 { description = "Kernel 2.6.32-34"; data = /incbin/("/boot/vmlinuz-2.6.32-34-generic"); type = "kernel"; arch = "ppc"; os = "linux"; compression = "gzip"; load = <00000000>; entry = <00000000>; hash@1 { algo = "md5"; }; }; ... }; ... }; The dumpimage can extract the 'kernel@1' node through the following command: $ ./dumpimage -T flat_dt -i kernel.itb -p 0 kernel Extracted: Image 0 (kernel@1) Description: Kernel 2.6.32-34 Created: Wed Oct 22 15:50:26 2014 Type: Kernel Image Compression: gzip compressed Data Size: 4040128 Bytes = 3945.44 kB = 3.85 MB Architecture: PowerPC OS: Linux Load Address: 0x00000000 Entry Point: 0x00000000 Hash algo: md5 Hash value: 22352ad39bdc03e2e50f9cc28c1c3652 Which results in the file 'kernel' being exactly the same as '/boot/vmlinuz-2.6.32-34-generic'. Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29dumpimage: add 'T' option to explicitly set the image typeGuilherme Maciel Ferreira
Some image types, like "KeyStone GP", do not have magic numbers to distinguish them from other image types. Thus, the automatic image type discovery does not work correctly. This patch also fix some integer type mismatches. Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-14test: Add unit tests for bootm image decompressionSimon Glass
Use each compression method (including uncompressed). Test for normal operation, insufficient space and corrupted data. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14test: Rename test_compression to ut_compressionSimon Glass
Try to keep the names of the unit test commands consistent. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14test: Add DEBUG output option to test-fit.pySimon Glass
Sometimes it is useful to see the output from U-Boot, so add an option to make this easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14sandbox: Correct ordering of 'sb save' commandsSimon Glass
Prior to commit d455d87 there was an inconsistency between the position of the 'address' parameter in 'sb load' and 'sb save'. This was corrected but it broke some tests. Fix the tests and also the help for 'sb save'. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-12-12Merge git://git.denx.de/u-boot-dmTom Rini
2014-12-11Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
Conflicts: board/freescale/mx6sxsabresd/mx6sxsabresd.c Signed-off-by: Tom Rini <trini@ti.com>
2014-12-11dm: i2c: Add tests for I2CSimon Glass
Add some basic tests to check that the system works as expected. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2014-12-11dm_test: improve the appearance shown by "dm tree" commandMasahiro Yamada
The command "dm tree" lists devices in a tree-like format. This commit makes it look more like what the Unix command "tree" shows. => dm tree Class Probed Name ---------------------------------------- root [ + ] root_driver demo [ ] |-- demo_shape_drv demo [ ] |-- demo_simple_drv demo [ ] |-- demo_shape_drv demo [ ] |-- demo_simple_drv demo [ ] |-- demo_shape_drv test [ ] |-- test_drv test [ ] |-- test_drv test [ ] |-- test_drv gpio [ ] |-- gpio_sandbox serial [ ] |-- serial_sandbox serial [ + ] |-- serial demo [ ] |-- triangle demo [ ] |-- square demo [ ] |-- hexagon gpio [ ] |-- gpios spi [ ] |-- spi@0 spi_emul [ ] | `-- flash@0 cros_ec [ + ] `-- cros-ec@0 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-23sandbox: script for testing sandbox/ext4/fat/fs commandsSuriyan Ramasami
Test size/read/write commands in a sandbox environment. Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-11-14test: ums: Add sleep before unmount directoryLukasz Majewski
This change helps to run script on machines with quite long uptime. Without this the following error emerges: File: ./dat_14M.img umount: /mnt/tmp-ums-test: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) TX: md5sum:083d3d22b542d3ecba61b12d17e03f9f mount: /dev/sdd6 already mounted or /mnt/tmp-ums-test busy mount: according to mtab, /dev/sdd6 is already mounted on /mnt/tmp-ums-test Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-11-07hush: make run_command() return an error on parsing failureRabin Vincent
run_command() returns success even if the command had a syntax error; correct this behaviour. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Simon Glass <sjg@chromium.org)
2014-11-07hush: return consistent codes from run_command()Rabin Vincent
Attempting to run: - an empty string - a string with just spaces returns different error codes, 1 for the empty string and 0 for the string with just spaces. Make both of them return 0 for consistency. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Simon Glass <sjg@chromium.org)
2014-10-27test: Add a simple test to detected warnings with uint64_t, uintptr_tSimon Glass
These types are problematic because they are typically declared in a non-standard way in U-Boot. For example, U-Boot uses 'long long' for int64_t even on a 64-bit machine whereas stdint.h uses 'long'. Similarly, U-Boot always uses 'long' for intptr_t whereas stdint.h mostly uses 'int'. This simple test script runs a few toolchains on a few archs to check for warnings. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-27cli: hush: Adjust 'run' command to run each line of the env varSimon Glass
The run command treats each argument an an environment variable. It gets the value of each variable and executes it as a command. If an environment variable contains a newline and the hush cli is used, it is supposed to execute each line one after the other. Normally a newline signals to hush to exit - this is used in normal command line entry - after a command is entered we want to return to allow the user to enter the next one. But environment variables obviously need to execute to completion. Add a special case for the execution of environment variables which continues when a newline is seen, and add a few tests to check this behaviour. Note: it's not impossible that this may cause regressions in other areas. I can't think of a case but with any change of behaviour with limited test coverage there is always a risk. From what I can tell this behaviour has been around since at least U-Boot 2011.03, although this pre-dates sandbox and I have not tested it on real hardware. Reported-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-24test: dm: Add additional GPIO testsSimon Glass
Add tests for gpio_requestf() and for memory leaks. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-24test: dm: Support memory leak checking as a core featureSimon Glass
Check the state of the malloc() heap before each test is run, so that tests can verify that all is well at the end. Provide helper functions to mark the heap and to check that it returns to its initial state. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-24dm: gpio: Add gpio_requestf() helper for printf() stringsSimon Glass
Add a helper which permits a printf()-style format string for the requester string. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-24test: dm: Update GPIO tests for new gpio_request() methodSimon Glass
Now that gpio_request() is handled by the uclass, updates the tests accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: sf: Add tests for SPI flashSimon Glass
Add a simple test for SPI that uses SPI flash. It operates by creating a SPI flash file and using the 'sf test' command to test that all operations work correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: spi: Add testsSimon Glass
These tests use SPI flash (and the sandbox emulation) to operate. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22dm: core: Add functions for iterating through device childrenSimon Glass
Buses need to iterate through their children in some situations. Add a few functions to make this easy. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-09-24test: Add a test for command repeatSimon Glass
This performs a command, then repeats it, and checks that the repeat happens. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-24test: Remove tabs from trace testSimon Glass
These cause U-Boot to print a list of available commands. It doesn't break the test, but it is best to remove them from the output. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-28Correct sandbox filesystem commands in FIT image testSimon Glass
The host filesystem name has changed, so update the tests. The tests now run again correctly: $ make O=b/sandbox sandbox_defconfig all ... $ test/image/test-fit.py -u b/sandbox/u-boot FIT Tests ========= Kernel load Kernel + FDT load Kernel + FDT + Ramdisk load Tests passed Caveat: this is only a sanity check - test coverage is poor Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-20test: ums: Add script for testing UMS gadget operationLukasz Majewski
This commit adds new test for UMS USB gadget to u-boot mainline tree. It is similar in operation to the one already available in test/dfu directory. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-20test: dfu: cosmetic: Add missing license information to DFU test scriptsLukasz Majewski
By mistake I've forgotten to add the SPDX license tags for the DFU testing scripts. This commit fixes that and also provides some other relevant information. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-20test: dfu: Extend dfu_gadget_test_init.sh to accept sizes of test filesLukasz Majewski
It is now possible to pass to the dfu_gadget_test_init.sh script the sizes of files to be generated. This feature is required by UMS tests which reuse this code. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2014-08-09Implement generalised RSA public exponents for verified bootMichael van der Westhuizen
Remove the verified boot limitation that only allows a single RSA public exponent of 65537 (F4). This change allows use with existing PKI infrastructure and has been tested with HSM-based PKI. Change the configuration OF tree format to store the RSA public exponent as a 64 bit integer and implement backward compatibility for verified boot configuration trees without this extra field. Parameterise vboot_test.sh to test different public exponents. Mathematics and other hard work by Andrew Bott. Tested with the following public exponents: 3, 5, 17, 257, 39981, 50457, 65537 and 4294967297. Signed-off-by: Andrew Bott <Andrew.Bott@ipaccess.com> Signed-off-by: Andrew Wishart <Andrew.Wishart@ipaccess.com> Signed-off-by: Neil Piercy <Neil.Piercy@ipaccess.com> Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com> Cc: Simon Glass <sjg@chromium.org>
2014-08-09test: dfu: add some more test casesStephen Warren
On Tegra, the DFU buffer size is 1M. Consequently, the 8M test always fails. Add tests for the 1M size, and one byte less as a corner case, so that some large tests are executed and expected to pass. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09test: dfu: cleanup before executionStephen Warren
Call cleanup() before running tests too. If a previous test was CTRL-C'd some stale files may have been left around. dfu-util refuses to receive a file to a filename that already exists, which results in false test failures if the files aren't cleaned up first. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09test:dfu: README file updateLukasz Majewski
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>