summaryrefslogtreecommitdiff
path: root/tools/buildman
AgeCommit message (Collapse)Author
2016-05-17buildman: allow more incremental buildingStephen Warren
One use-case for buildman is to continually run it interactively after each small step in a large refactoring operation. This gives more immediate feedback than making a number of commits and then going back and testing them. For this to work well, buildman needs to be extremely fast. At present, a couple issues prevent it being as fast as it could be: 1) Each time buildman runs "make %_defconfig", it runs "make mrproper" first. This throws away all previous build results, requiring a from-scratch build. Optionally avoiding this would speed up the build, at the cost of potentially causing or missing some build issues. 2) A build tree is created per thread rather than per board. When a thread switches between building different boards, this often causes many files to be rebuilt due to changing config options. Using a separate build tree for each board would avoid this. This does put more strain on the system's disk cache, but it is worth it on my system at least. This commit adds two command-line options to implement the changes described above; -I ("--incremental") turns of "make mrproper" and -P ("--per-board-out-dir") creats a build directory per board rather than per thread. Tested: ./tools/buildman/buildman.py tegra ./tools/buildman/buildman.py -I -P tegra ./tools/buildman/buildman.py -b tegra_dev tegra ./tools/buildman/buildman.py -b tegra_dev -I -P tegra ... each once after deleting the buildman result/work directory, and once "incrementally" after a previous identical invocation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org> # v1 Tested-by: Simon Glass <sjg@chromium.org> # v1 Acked-by: Simon Glass <sjg@chromium.org>
2016-03-18buildman: Clarify the use of -VSimon Glass
This option outputs to the log file, not to the terminal. Clarify that in the help, and add a mention of it in the README. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-03-18buildman: Add a way to specific a full toolchain prefixSimon Glass
At present buildman allows you to specify the directory containing the toolchain, but not the actual toolchain prefix. If there are multiple toolchains in a single directory, this can be inconvenient. Add a new 'toolchain-prefix' setting to the settings file, which allows the full prefix (or path to the C compiler) to be specified. Update the documentation to match. Suggested-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-18buildman: Allow branch names which conflict with directoriesSimon Glass
At present if you try to use buildman with the branch 'test' it will complain that it is unsure whether you mean the branch or the directory. This is a feature of the 'git log' command that buildman uses. Fix it by resolving the ambiguity. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-14buildman: Allow the toolchain architecture to be specifiedSimon Glass
At present the architecture is deduced from the toolchain filename. Allow it to be specified by the caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com
2016-03-14buildman: Allow the toolchain priority to be specifiedSimon Glass
At present the priority of a toolchain is calculated from its filename based on hard-coded rules. Allow it to be specified by the caller. We will use this in a later patch. Also display the priority and provide a message when it is overriden by another toolchain of higher priority. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-14buildman: Fix up a few code inconsistencies in toolchain.pySimon Glass
Normally we use a single quote for strings unless there is a reason not to (such as an embedded single quote). Fix a few counter-examples in this file. Also add a missing function-argument comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-14buildman: patman: Fix -H when installed as a symlinkSimon Glass
It is convenient to install symlinks to buildman and patman in the search patch, such as /usr/local/bin. But when this is done, the -H option fails to work because it looks in the directory containing the symlink instead of its target. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2016-02-24tools: Update openrisc toolchain informationBin Meng
Since commit 87da2690ab81b5f29f83dc85c55f933e6ef414bc "openrisc: updating build tools naming convention", openrisc kernel.org toolchain is out of date and cannot build U-Boot. Update buildman and moveconfig tools to refer to the new one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-11buildman: README: add links for toolchains not available on kernel.orgThomas Chou
Add links for toolchains not available on kernel.org. The sh4 toolchains from kernel.org dose not work for some boards, so use the sh from Sourcery. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-09-09buildman: Improve the config comparison featureSimon Glass
At present buildman can compare configurations between commits but the feature is less useful than it could be. There is no summary by architecture and changes are not reported on a per-board basis. Correct these deficiencies so that it is possible to see exactly what is changing for any number of boards. Note that 'buildman -b <branch> -C' is recommended for any build where you will be comparing configuration. Without -C the correct configuration will not be reported since changes will often not be picked up. Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-28kconfiglib: update to the latest versionUlf Magnusson
Corresponds to ba71a0e (Fix _parse_block() 'parent' documentation re. ifs.) from upstream, just adding the SPDX tag. Has performance improvements, code cleanup, Python 3 support, and various small fixes, including the following: - Unset user values when loading a zero-byte .config. (5e54e2c) - Ignore indented .config assignments. (f8a7510) - Do not require $srctree to be set for non-kernel projects. (d56e9c1) - Report correct locations in the presence of continuation lines. (0cebc87) Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
2015-07-28buildman: Correct '--fetch-arch' command documentationBin Meng
The doc wrongly put sandbox in the '--fetch-arch' command. Remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-15builderthread.py: Keep 'SPL'Tom Rini
On i.MX platforms the SPL binary is called "SPL" so make sure we keep that. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-06-12kconfiglib: sync with the latest in Kconfiglib projectMasahiro Yamada
This commit imports some updates of kconfiglib.py from https://github.com/ulfalizer/Kconfiglib - Warn about and ignore the "allnoconfig_y" Kconfig option - Statements in choices inherit menu/if deps - Add Symbol.is_allnoconfig_y() - Hint that modules are still supported despite warnings. - Add warning related to get_defconfig_filename(). - Fix typo in docs. - Allow digits in $-references to symbols. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Philip Craig <philipjcraig@gmail.com> Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-04-23buildman: Add gcc 4.9.0 with Microblaze toolchainMichal Simek
Also read gcc 4.9.0 at kernel.org which also have Microblaze toolchain. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Fixed unit test failure by updating the test: Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18buildman: Make -V (verbose_build) really be verboseTom Rini
The help text for -V says we will pass V=1 but all it really did was not pass in -s. Change the logic to pass make V=1 with given to buildman -V or -s to make otherwise. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18buildman: Keep more outputs with the --keep-outputs flagTom Rini
When told to keep outputs, be much more liberal in what files we keep. In addition to adding 'MLO', keep anything that matches u-boot-spl.* (so that we keep the map file as well) and anything we generate about 'u-boot itself. A large number of bootable formats now match this and thus it's easier to build many targets and then boot them afterwards using buildman. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18buildman: Allow comparison of build configurationSimon Glass
It is useful to be able to see CONFIG changes made by commits. Add this feature to buildman using the -K flag so that all CONFIG changes are reported. The CONFIG options exist in a number of files. Each is reported individually as well as a summary that covers all files. The output shows three parts: green for additions, red for removals and yellow for changes. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18buildman: Store build config filesSimon Glass
Store all config file output so that we can compare changes if requested. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18buildman: Adjust the 'aborted' heuristic for writing outputSimon Glass
At present buildman tries to detect an aborted build and doesn't record a result in that case. This is to make sure that an abort (e.g. with Ctrl-C) does not mark the build as done. Without this option, buildman would never retry the build unless -f/-F are provided. The effect is that aborting the build creates 'fake errors' on whatever builds buildman happens to be working on at the time. Unfortunately the current test is not reliable and this detection can trigger if a required toolchain tool is missing. In this case the toolchain problem is never reported. Adjust the logic to continue processing the build result, mark the build as done (and failed), but with a return code which indicates that it should be retried. The correct fix is to fully and correctly detect an aborted build, quit buildman immediately and not write any partial build results in this case. Unfortunately this is currently beyond my powers and is left as an exercise for the reader (and patches are welcome). Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18buildman: Show 'make' command line when -V is usedSimon Glass
When a verbose build it selected, show the make command before the output of that command. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-30ARM: tegra: rename colibri_t20 board/configuration/device-treeMarcel Ziswiler
In accordance with our other modules supported by U-Boot and as agreed upon for Apalis/Colibri T30 get rid of the carrier board in the board/ configuration/device-tree naming. While at it also bring the prompt more in line with our other products. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-03-05buildman: Add a space before the list of boardsSimon Glass
Tweak the output slightly so we don't get things like: - board1 board2+ board3 board4 There should be a space before the '+'. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-05buildman: Correct toolchain download featureSimon Glass
Commit d908898 updated the ScanPath() function but not its documentation and not all its callers. This breaks the toolchain check after it is downloaded. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-02-15buildman: allow multiple toolchains in a single pathAlbert ARIBAUD
When buildman scans a toolchain path, it stops at the first toolchain found. However, a single path can contains several toolchains, each with its own prefix. This patch lets buildman scan all toolchains in the path. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Add an option to write the full build outputSimon Glass
Normally buildman runs with 'make -s' meaning that only errors and warnings appear in the log file. Add a -V option to run make in verbose mode, and with V=1, causing a full build log to be created. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Add the option to download toolchains from kernel.orgSimon Glass
The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient repository of toolchains which can be used for U-Boot. Add a feature to download and install a toolchain for a selected architecture automatically. It isn't clear how long this site will stay in the current place and format, but we should be able to rely on bug reports if it changes. Suggested-by: Marek VaĊĦut <marex@denx.de> Suggested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Allow architecture to alias to multiple toolchainsSimon Glass
Some archs have need than one alias, so support a list of alises in the ..buildman file. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Don't use the local settings when running testsSimon Glass
We should create a test setting file when running testes, not use whatever happens to be on the local machine. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Don't complain about missing sections in ~/.buildmanSimon Glass
Silently ignore this since it is valid to have missing sections. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Add documentation about the .buildman fileSimon Glass
This file is only partially documented. Add some more details. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-15buildman: Add a note about Python pre-requisitesSimon Glass
Since we need a few modules which might not be available in a bare-bones distribution, add a note about that to the README. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-15buildman: Add an option to use the full tool chain pathSimon Glass
In some cases there may be multiple toolchains with the same name in the path. Provide an option to use the full path in the CROSS_COMPILE environment variable. Note: Wolfgang mentioned that this is dangerous since in some cases there may be other tools on the path that are needed. So this is set up as an option, not the default. I will need test confirmation (i.e. that this commit fixes a real problem) before merging it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Steve Rae <srae@broadcom.com>
2015-01-15buildman: Put the toolchain path first instead of last in PATHSimon Glass
If: 1. Toolchains A and B have the same filename 2. Toolchain A is in the PATH 3. Toolchain B is given in ~/.buildman and buildman uses it to build then buildman will add toolchain B to the end of its path but will not necessarily use it since U-Boot will find toolchain A first in the PATH. Try to fix this by putting the toolchain first in the path instead of last. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Try to avoid hard-coded string parsingSimon Glass
The assumption that the compiler name will always end in gcc is incorrect for clang and apparently on BSD. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Allow specifying a range of commits to buildSimon Glass
Adjust the -b flag to permit a range expression as well as a branch. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-15buildman: Don't remove entire output directory when testingSimon Glass
When running tests the output directory is often wiped. This is only safe if a branch is being built. The output directory may contain other things besides the buildman test output. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Add an option to flatten output directory treesSimon Glass
When building current source for a single board, buildman puts the output in <output_dir>/current/current/<board>. Add an option to make it use <output_dir>/<board> instead. This removes the unnecessary directories in that case, controlled by the --no-subdirs/-N option. Suggested-by: Tom Rini <trini@ti.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Try to guess the upstream commitSimon Glass
Buildman normally obtains the upstream commit by asking git. Provided that the branch was created with 'git checkout -b <branch> <some_upstream>' then this normally works. When there is no upstream, we can try to guess one, by looking up through the commits until we find a branch. Add a function to try this and print a warning if buildman ends up relying on it. Also update the documentation to match. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
2015-01-15buildman: Don't prune output space for 'current source' buildSimon Glass
This is not needed since we always do a full (non-incremental) build. Also it might be dangerous since it will try to delete everything below the base directory. Fix this potentially nasty bug. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Put build in 'current', not 'current/current'Simon Glass
Buildman currently puts current-source builds in a current/current subdirectory, but there is no need for the extra depth. Suggested-by: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-15buildman: Add tests that check the correct output directory is usedSimon Glass
Add a few tests of the output directory logic. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14Merge branch 'buildman' of git://git.denx.de/u-boot-x86Tom Rini
Conflicts: tools/buildman/control.py Signed-off-by: Tom Rini <trini@ti.com>
2014-12-29buildman: Fix some typos in READMEDirk Behme
Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-11-27buildman: Don't default to -e when building current sourceSimon Glass
We probably don't need to enable this option by default. It is useful to display only failure boards (not errors) and it is easy to add -e if it is required. Also update the docs. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-27buildman: Fix repeating board list with -lSimon Glass
Ensure that we don't print duplicate board names when -l is used. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Albert Aribaud <albert.u.boot@aribaud.net>
2014-11-27patman: Use the full commit hash for 'git checkout'Simon Glass
Even with the initial 8 characeters of the hash we will sometimes get a collision. Use the full hash. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-27buildman: Save *.img files tooTom Rini
When saving binary files we likely want to keep any .img files that have been generated as well. Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-11-03patman: Use the full commit hash for 'git checkout'Simon Glass
Even with the initial 8 characeters of the hash we will sometimes get a collision. Use the full hash. Signed-off-by: Simon Glass <sjg@chromium.org>