summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2015-11-04fdtgrep: Simplify the alias generation codeSimon Glass
We don't need to allocate a new region list when we run out of space. The outer function can take care of this for us. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-10-24Fix bad return value checks (detected with Coccinelle)Thomas Huth
In the "Getting Started with Coccinelle - KVM edition" presentation that has been held by Julia Lawall at the KVM forum 2015 (see the slides at http://events.linuxfoundation.org/sites/events/files/slides/tutorial_kvm_0.pdf), she pointed out some bad return value checks in U-Boot that can be detected with Coccinelle by using the following config file: @@ identifier x,y; identifier f; statement S; @@ x = f(...); ( if (x < 0) S | if ( - y + x < 0) S ) This patch now fixes these issues. Signed-off-by: Thomas Huth <huth@tuxfamily.org>
2015-10-21kwbimage: Align payload size to 4 bytesStefan Roese
The MVEBU BootROM does not allow non word aligned payloads. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-10-13Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2015-10-11Fix variation in timestamps caused by timezone differences.Vagrant Cascadian
When building with SOURCE_DATE_EPOCH set, avoid use of mktime in default_image.c, which converts the timestamp into localtime. This causes variation based on timezone when building u-boot.img and u-boot-sunxi-with-spl.bin targets. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Tested-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Paul Kocialkowski <contact@paulk.fr>
2015-10-11tools/mkimage.c: Clarify help text for -D slightlyTom Rini
Try and make it clear that -D will replace all arguments passed to dtc and is not appending them. Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-07imximage: fix commands other than write_dataTroy Kisky
When CHECK_BITS_SET was added, they forgot to add a new command table, and instead overwrote the previous table. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-10-07imximage: header.length of 4 is validTroy Kisky
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2015-10-01Merge git://git.denx.de/u-boot-marvellTom Rini
2015-10-01tools: kwboot: Add support for UART boot mode patching for Armada XP/38xStefan Roese
Currently, kwboot only allows dynamic UART boot mode patching for SoCs with header version 0 (Orion, Kirkwood). This patch now enables this "-p" feature also for SoCs with header version 1 (Armada XP / 38x etc). With this its possible now to use the UART boot mode without on images that are generated for other boot devices, like SPI. So no need to change BOOT_FROM to "uart" for UART xmodem booting any more. Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
2015-09-29sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variantBernhard Nortmann
This patch follows up on a discussion of ways to improve support for the sunxi FEL ("USB boot") mechanism, especially with regard to boot scripts, see: https://groups.google.com/d/msg/linux-sunxi/wBEGUoLNRro/rHGq6nSYCQAJ The idea is to convert the (currently unused) "pad" bytes in the SPL header into an area where data can be passed to U-Boot. To do this safely, we have to make sure that we're actually using our "sunxi" flavor of the SPL, and not the Allwinner boot0. The modified mksunxiboot introduces a special signature to the SPL header in place of the "pub_head_size" field. This can be used to reliably distinguish between compatible versions of sunxi SPL and anything else (older variants or Allwinner's boot0). Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-09-29sunxi: move SPL-related definitions to platform-specific includeBernhard Nortmann
The sunxi platform currently doesn't seem to make any use of the asm/arch-sunxi/spl.h file. This patch moves some declarations from tools/mksunxiboot.c into it. This enables us to reuse those definitions when extending the sunxi board code (boards/sunxi/boards.c). Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-09-28tools: moveconfig: Update the URL for nds32 toolchainBin Meng
Give a full URL for a working nds32 toolchain for U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-09-28tools: gen_eth_addr: add getpid() to time(0) to avoid duplicated seedJosh Wu
As 'time(0) | getpid()' will have a lot of duplicated value. It is not a expected behavior. We expect different value for the seed when when run it in many times. So this patch will left shift the getpid() and add to time(0). That avoid duplicated value. Test command is like: % RUN=0; while [ $RUN -lt 10000 ]; do tools/gen_eth_addr; RUN=$(($RUN+1)); done | sort | uniq | wc -l 10000 This patch is incorporated with suggestions made by Wolfgang Denk and Andreas Bießmann. Thanks them a lot. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Wolfgang Denk <wd@denx.de> Tested-by: Wolfgang Denk <wd@denx.de>
2015-09-13mxs: mxsboot: fix endianess for sd boot imagesMichael Heimpold
Running mxsboot on a big-endian system produces a sd image which cannot be started by the i.MX28 ROM. It complains on the debug uart as following: 0x8020a009 0x80502008 0x8020a009 0x80502008 ... Enforcing all fields within the BCB to little-endian make the image bootable again. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2015-09-11Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2015-09-10sunxi: Ensure that 'mksunxiboot' tool produces deterministic outputSiarhei Siamashka
Currently some uninitialized padding bytes are written to the output file, as can be confirmed with valgrind: $ valgrind tools/mksunxiboot spl/u-boot-spl.bin spl/sunxi-spl.bin ==5581== Syscall param write(buf) points to uninitialised byte(s) ==5581== at 0x4F0F940: __write_nocancel (in /lib64/libc-2.20.so) ==5581== by 0x400839: main (in /tmp/u-boot/tools/mksunxiboot) ==5581== Address 0xffeff5d3c is on thread 1's stack ==5581== in frame #1, created by main (???) This patch fixes the problem by clearing the whole structure instead of just a portion of it. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-09-09buildman: Improve the config comparison featureSimon Glass
At present buildman can compare configurations between commits but the feature is less useful than it could be. There is no summary by architecture and changes are not reported on a per-board basis. Correct these deficiencies so that it is possible to see exactly what is changing for any number of boards. Note that 'buildman -b <branch> -C' is recommended for any build where you will be comparing configuration. Without -C the correct configuration will not be reported since changes will often not be picked up. Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-09Revert "patman: use -D option for git format-patch"Masahiro Yamada
This reverts commit 19b4a3369876f9215e2b861f211e8df1a75e26ca. Since that commit, patman generates useless patches for file removal; "git format -D" prints only the header but not the diff when deleting files, and "git am" always refuses such patches. The following is the quotation from "man git-format-patch": -D, --irreversible-delete Omit the preimage for deletes, i.e. print only the header but not the diff between the preimage and /dev/null. The resulting patch is not meant to be applied with patch nor git apply; this is solely for people who want to just concentrate on reviewing the text after the change. In addition, the output obviously lack enough information to apply such a patch in reverse, even manually, hence the name of the option. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09x86: ifdtool: Support checking region overlap before U-BootBin Meng
We have the capability to check regions written after U-Boot that do not overlap. Since regions can also be written before U-Boot, add such check for these too. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Andy Pont <andy.pont@sdcsystems.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2015-09-03Merge git://git.denx.de/u-boot-rockchipTom Rini
2015-09-03rockchip: Drop first 32kb of zeros from the rkSD image typeSjoerd Simons
Instead of creating a rockchip SPL SD card image with 32KB of zeros which can be written to the start of an SD card, create the images with only the useful data that should be written to an offset of 32KB on the SD card. The first 32 kilobytes aren't needed for bootup and only serve as convenient way of accidentally obliterating your partition table. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-03rockchip: Add support for the SPI imageSimon Glass
The Rockchip boot ROM requires a particular file format for booting from SPI. It consists of a 512-byte header encoded with RC4, some padding and then up to 32KB of executable code in 2KB blocks, separated by 2KB empty blocks. Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be converted to this format. This allows booting from SPI flash on supported machines. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-03rockchip: Add support for the SD imageSimon Glass
The Rockchip boot ROM requires a particular file format. It consists of 64KB of zeroes, a 512-byte header encoded with RC4, and then some executable code. Add support to mkimage so that an SPL image (u-boot-spl-dtb.bin) can be converted to this format. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-03rockchip: Add the rkimage format to mkimageSimon Glass
Rockchip SoCs require certain formats for code that they execute, The simplest format is a 4-byte header at the start of a binary file. Add support for this so that we can create images that the boot ROM understands. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-03mkimage: Allow the original file size to be recordedSimon Glass
Allow the image handler to store the original input file size so that it can reference it later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-03mkimage: Allow padding to any lengthSimon Glass
At present there is an arbitrary limit of 4KB for padding. Rockchip needs more than that, so remove this restriction. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-02tools: mxsboot: calculate ECC block level dynamicallyJörg Krause
For pages of 2048 bytes the current setting of the ECC Error Correction Level is only true for an oob size of 64 bytes and wrong for all others. Instead of hard-coding every possible combination of page size and oob size use the dynamic calculation of the ECC strength introduced in commit 6121560d7714d6d8e41ce1687a1388a1a8fea4cb. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2015-09-02tools/imximage: set DCD pointer to NULL when its length is 0Baruch Siach
When dcd_len is 0 the Write Data command that the set_dcd_rst_v2() routine generates is empty. This causes HAB to complain that the command is invalid. --------- HAB Event 1 ----------------- event data: 0xdb 0x00 0x0c 0x41 0x33 0x06 0xc0 0x00 0xcc 0x00 0x04 0x04 To fix this set the DCD pointer in the IVT to NULL in this case. The DCD header itself is still needed for detect_imximage_version() to determine the image version. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Stefano Babic <sbabic@denx.de>
2015-08-31buildman: Correct 'Series-cover-cc' detection logicSimon Glass
This requires 'Series-cover_cc' at present which is incorrect. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-28tools/atmelimage.c: Fix warning when debug is enabledTom Rini
Otherwise we get: tools/atmelimage.c:134:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘size_t’ [-Wformat=] debug("atmelimage: interrupt vector #%d is 0x%08X\n", pos+1, ^ Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-28kconfiglib: update to the latest versionUlf Magnusson
Corresponds to ba71a0e (Fix _parse_block() 'parent' documentation re. ifs.) from upstream, just adding the SPDX tag. Has performance improvements, code cleanup, Python 3 support, and various small fixes, including the following: - Unset user values when loading a zero-byte .config. (5e54e2c) - Ignore indented .config assignments. (f8a7510) - Do not require $srctree to be set for non-kernel projects. (d56e9c1) - Report correct locations in the presence of continuation lines. (0cebc87) Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
2015-08-26patman: use -D option for git format-patchMasahiro Yamada
This allows Patman to generate smaller patches for file removal. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
2015-08-26x86: ifdtool: Drop microcode from the device tree when collatingSimon Glass
When ifdtool collates the microcode into one place it effectively creates a copy of the 'data' properties in the device tree microcode nodes. This is wasteful since we now have two copies of the microcode in the ROM. To avoid this, remove the microcode data from the device tree and shrink it down. This means that there is only one copy and the overall ROM space used by the microcode does not increase. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26x86: ifdtool: Support collating microcode into one placeSimon Glass
The Intel Firmware Support Package (FSP) requires that microcode be provided very early before the device tree can be scanned. We already support adding a pointer to the microcode data in a place where early init code can access. However this just points into the device tree and can only point to a single lot of microcode. For boards which may have different CPU types we must support multiple microcodes and pass all of them to the FSP in one place. Enhance ifdtool to scan all the microcode, place it together in the ROM and update the microcode pointer to point there. This allows us to pass multiple microcode blocks to the FSP using its existing API. Enable the flag in the Makefile so that this feature is used by default for all boards. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26x86: ifdtool: Split microcode linking into its own functionSimon Glass
The code to set up the microcode pointer in the ROM shares almost nothing with the write_uboot() function. Move it into its own function so it will be easier to extend. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26x86: ifdtool: Check that U-Boot does not overlap other regionsSimon Glass
Since U-Boot and its device tree can grow we should check that it does not overlap the regions above it. Track the ROM offset that U-Boot reaches and check that other regions (written after U-Boot) do not interfere. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-13logos: add Toradex logoStefan Agner
Use the boot loader splash screen from WinCE which matches our wallpapers position wise. Although the logo is an 8-bit indexed BMP as well colours looked odd at first in U-Boot. After converting to full RGB palette and converting back to an indexed BMP using imagemagick the Logo showed up properly. $ convert tools/logos/toradex-rgb.bmp -type Palette -colors 256 \ -compress none -verbose BMP3:tools/logos/toradex.bmp Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2015-08-05gitignore: Add defconfig and fdtgrepBin Meng
Ignore defconfig and tools/fdtgrep. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-02Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2015-07-31patman: Don't run patman when it is imported as a moduleSimon Glass
Commit 488d19c (patman: add distutils based installer) has the side effect of making patman run twice with each invocation. Fix this by checking for 'main program' invocation in patman.py. This is good practice in any case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Chris Packham <judge.packham@gmail.com>
2015-07-28patman: add distutils based installerChris Packham
To make it easier to use patman on other projects add a distutils style installer. Now patman can be installed with cd u-boot/tools/patman && python setup.py install There are also the usual distutils options for creating source/binary distributions of patman. Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28buildman: Correct '--fetch-arch' command documentationBin Meng
The doc wrongly put sandbox in the '--fetch-arch' command. Remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-27Reproducible U-Boot build support, using SOURCE_DATE_EPOCHPaul Kocialkowski
In order to achieve reproducible builds in U-Boot, timestamps that are defined at build-time have to be somewhat eliminated. The SOURCE_DATE_EPOCH environment variable allows setting a fixed value for those timestamps. Simply by setting SOURCE_DATE_EPOCH to a fixed value, a number of targets can be built reproducibly. This is the case for e.g. sunxi devices. However, some other devices might need some more tweaks, especially regarding the image generation tools. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-27tools: remove mpc86x_clk toolMasahiro Yamada
This is commented out in the Makefile for more than 10 years. I assume it is proof that this tool is unused. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Pantelis Antoniou <panto@intracom.gr>
2015-07-26imx: imximage: add new CHECK/CLR BIT commandAdrian Alonso
* Extend imximage DCD version 2 to support DCD commands CMD_WRITE_CLR_BIT 4 [address] [mask bit] means: while ((*address & ~mask) != 0); CMD_CHECK_BITS_SET 4 [address] [mask bit] means: while ((*address & mask) != mask); CMD_CHECK_BITS_CLR 4 [address] [mask bit] means: *address = *address & ~mask; * Add set_dcd_param_v2 helper function to set DCD command parameters Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-07-24kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFSStefan Roese
To use this offset for other boot device (like SDIO/MMC), lets rename it to a more generic name. This will be used be the SDIO/MMC SPL boot support for the A38x. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
2015-07-24kwbimage: Add support for SDIO/MMC boot device selectionStefan Roese
This patch adds support to select the "sdio" as boot device in the kwbimage.cfg file. This line selects this SDIO device: BOOT_FROM sdio Tested on Marvell DB-88F6820-GP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
2015-07-21mkimage: Set up a file size parameter and keep it updatedSimon Glass
Some functions called by mkimage would like to know the output file size. Initially this is the same as the input file size, but it may be affected by adding headers, etc. Add this information to the image parameters. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-07-21fdt: Add fdtgrep toolSimon Glass
This tool allows us to extract subsets of a device tree file. It is used by the SPL vuild, which needs to cut down the device tree size for use in limited memory. This tool was originally written for libfdt but it has not been accepted upstream, so for now, include it in U-Boot. Several utilfdt library functions been included inline here. If fdtgrep is eventually accepted in libfdt then we can bring that version of libfdt in here, and drop fdtgrep (requiring that fdtgrep is provided by the user). If it is not accepted then another approach would be to write a special tool for chopping down device tree files for SPL. While it would use the same libfdt support, it would be less code than fdtgrep.c because it would not have general-purpose functions. Another approach (which was used with v1 of this series) is to sprinkler all the device tree files with #ifdef. I don't like that idea. Signed-off-by: Simon Glass <sjg@chromium.org>