summaryrefslogtreecommitdiff
path: root/board/nvidia/common/board.c
blob: 627e061798f60ccdbcf2e2cf10cafc3100651905 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
/*
 *  (C) Copyright 2010,2011
 *  NVIDIA Corporation <www.nvidia.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <ns16550.h>
#include <asm/io.h>
#include <asm/arch/tegra2.h>
#include <asm/arch/sys_proto.h>

#include <asm/arch/clk_rst.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/uart.h>
#include "board.h"

#ifdef CONFIG_TEGRA2_MMC
#include <mmc.h>
#endif

DECLARE_GLOBAL_DATA_PTR;

const struct tegra2_sysinfo sysinfo = {
	CONFIG_TEGRA2_BOARD_STRING
};

#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
	/* Initialize periph clocks */
	clock_init();

	/* Initialize periph pinmuxes */
	pinmux_init();

	/* Initialize periph GPIOs */
	gpio_init();

	/* Init UART, scratch regs, and start CPU */
	tegra2_start();
	return 0;
}
#endif	/* EARLY_INIT */

/*
 * Routine: timer_init
 * Description: init the timestamp and lastinc value
 */
int timer_init(void)
{
	reset_timer();
	return 0;
}

/*
 * Routine: clock_init_uart
 * Description: init the PLL and clock for the UART(s)
 */
static void clock_init_uart(void)
{
	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
	u32 reg;

	reg = readl(&clkrst->crc_pllp_base);
	if (!(reg & PLL_BASE_OVRRIDE)) {
		/* Override pllp setup for 216MHz operation. */
		reg = (PLL_BYPASS | PLL_BASE_OVRRIDE | PLL_DIVP);
		reg |= (((NVRM_PLLP_FIXED_FREQ_KHZ/500) << 8) | PLL_DIVM);
		writel(reg, &clkrst->crc_pllp_base);

		reg |= PLL_ENABLE;
		writel(reg, &clkrst->crc_pllp_base);

		reg &= ~PLL_BYPASS;
		writel(reg, &clkrst->crc_pllp_base);
	}

	/* Now do the UART reset/clock enable */
#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
	/* Assert Reset to UART */
	reg = readl(&clkrst->crc_rst_dev_l);
	reg |= SWR_UARTA_RST;		/* SWR_UARTA_RST = 1 */
	writel(reg, &clkrst->crc_rst_dev_l);

	/* Enable clk to UART */
	reg = readl(&clkrst->crc_clk_out_enb_l);
	reg |= CLK_ENB_UARTA;		/* CLK_ENB_UARTA = 1 */
	writel(reg, &clkrst->crc_clk_out_enb_l);

	/* Enable pllp_out0 to UART */
	reg = readl(&clkrst->crc_clk_src_uarta);
	reg &= 0x3FFFFFFF;	/* UARTA_CLK_SRC = 00, PLLP_OUT0 */
	writel(reg, &clkrst->crc_clk_src_uarta);

	/* wait for 2us */
	udelay(2);

	/* De-assert reset to UART */
	reg = readl(&clkrst->crc_rst_dev_l);
	reg &= ~SWR_UARTA_RST;		/* SWR_UARTA_RST = 0 */
	writel(reg, &clkrst->crc_rst_dev_l);
#endif	/* CONFIG_TEGRA2_ENABLE_UARTA */
#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
	/* Assert Reset to UART */
	reg = readl(&clkrst->crc_rst_dev_u);
	reg |= SWR_UARTD_RST;		/* SWR_UARTD_RST = 1 */
	writel(reg, &clkrst->crc_rst_dev_u);

	/* Enable clk to UART */
	reg = readl(&clkrst->crc_clk_out_enb_u);
	reg |= CLK_ENB_UARTD;		/* CLK_ENB_UARTD = 1 */
	writel(reg, &clkrst->crc_clk_out_enb_u);

	/* Enable pllp_out0 to UART */
	reg = readl(&clkrst->crc_clk_src_uartd);
	reg &= 0x3FFFFFFF;	/* UARTD_CLK_SRC = 00, PLLP_OUT0 */
	writel(reg, &clkrst->crc_clk_src_uartd);

	/* wait for 2us */
	udelay(2);

	/* De-assert reset to UART */
	reg = readl(&clkrst->crc_rst_dev_u);
	reg &= ~SWR_UARTD_RST;		/* SWR_UARTD_RST = 0 */
	writel(reg, &clkrst->crc_rst_dev_u);
#endif	/* CONFIG_TEGRA2_ENABLE_UARTD */
}

/*
 * Routine: pin_mux_uart
 * Description: setup the pin muxes/tristate values for the UART(s)
 */
static void pin_mux_uart(void)
{
	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
	u32 reg;

#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
	reg = readl(&pmt->pmt_ctl_c);
	reg &= 0xFFF0FFFF;	/* IRRX_/IRTX_SEL [19:16] = 00 UARTA */
	writel(reg, &pmt->pmt_ctl_c);

	reg = readl(&pmt->pmt_tri_a);
	reg &= ~Z_IRRX;		/* Z_IRRX = normal (0) */
	reg &= ~Z_IRTX;		/* Z_IRTX = normal (0) */
	writel(reg, &pmt->pmt_tri_a);
#endif	/* CONFIG_TEGRA2_ENABLE_UARTA */
#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
	reg = readl(&pmt->pmt_ctl_b);
	reg &= 0xFFFFFFF3;	/* GMC_SEL [3:2] = 00, UARTD */
	writel(reg, &pmt->pmt_ctl_b);

	reg = readl(&pmt->pmt_tri_a);
	reg &= ~Z_GMC;		/* Z_GMC = normal (0) */
	writel(reg, &pmt->pmt_tri_a);
#endif	/* CONFIG_TEGRA2_ENABLE_UARTD */
}

/*
 * Routine: clock_init_mmc
 * Description: init the PLL and clocks for the SDMMC controllers
 */
static void clock_init_mmc(void)
{
	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
	u32 reg;

	/* Do the SDMMC resets/clock enables */

	/* Assert Reset to SDMMC4 */
	reg = readl(&clkrst->crc_rst_dev_l);
	reg |= SWR_SDMMC4_RST;		/* SWR_SDMMC4_RST = 1 */
	writel(reg, &clkrst->crc_rst_dev_l);

	/* Enable clk to SDMMC4 */
	reg = readl(&clkrst->crc_clk_out_enb_l);
	reg |= CLK_ENB_SDMMC4;		/* CLK_ENB_SDMMC4 = 1 */
	writel(reg, &clkrst->crc_clk_out_enb_l);

	/* Enable pllp_out0 to SDMMC4 */
	reg = readl(&clkrst->crc_clk_src_sdmmc4);
	reg &= 0x3FFFFF00;	/* SDMMC4_CLK_SRC = 00, PLLP_OUT0 */
	reg |= (10 << 1);	/* n-1, 11-1 shl 1 */
	writel(reg, &clkrst->crc_clk_src_sdmmc4);

	/*
	 * As per the Tegra2 TRM, section 5.3.4:
	 * 'Wait 2 us for the clock to flush through the pipe/logic'
	 */
	udelay(2);

	/* De-assert reset to SDMMC4 */
	reg = readl(&clkrst->crc_rst_dev_l);
	reg &= ~SWR_SDMMC4_RST;		/* SWR_SDMMC4_RST = 0 */
	writel(reg, &clkrst->crc_rst_dev_l);

	/* Assert Reset to SDMMC3 */
	reg = readl(&clkrst->crc_rst_dev_u);
	reg |= SWR_SDMMC3_RST;		/* SWR_SDMMC3_RST = 1 */
	writel(reg, &clkrst->crc_rst_dev_u);

	/* Enable clk to SDMMC3 */
	reg = readl(&clkrst->crc_clk_out_enb_u);
	reg |= CLK_ENB_SDMMC3;		/* CLK_ENB_SDMMC3 = 1 */
	writel(reg, &clkrst->crc_clk_out_enb_u);

	/* Enable pllp_out0 to SDMMC4, set divisor to 11 for 20MHz */
	reg = readl(&clkrst->crc_clk_src_sdmmc3);
	reg &= 0x3FFFFF00;	/* SDMMC3_CLK_SRC = 00, PLLP_OUT0 */
	reg |= (10 << 1);	/* n-1, 11-1 shl 1 */
	writel(reg, &clkrst->crc_clk_src_sdmmc3);

	/* wait for 2us */
	udelay(2);

	/* De-assert reset to SDMMC3 */
	reg = readl(&clkrst->crc_rst_dev_u);
	reg &= ~SWR_SDMMC3_RST;		/* SWR_SDMMC3_RST = 0 */
	writel(reg, &clkrst->crc_rst_dev_u);
}

/*
 * Routine: pin_mux_mmc
 * Description: setup the pin muxes/tristate values for the SDMMC(s)
 */
static void pin_mux_mmc(void)
{
	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
	u32 reg;

	/* SDMMC4 */
	/* config 2, x8 on 2nd set of pins */
	reg = readl(&pmt->pmt_ctl_a);
	reg |= (3 << 16);	/* ATB_SEL [17:16] = 11 SDIO4 */
	writel(reg, &pmt->pmt_ctl_a);
	reg = readl(&pmt->pmt_ctl_b);
	reg |= (3 << 0);	/* GMA_SEL [1:0] = 11 SDIO4 */
	writel(reg, &pmt->pmt_ctl_b);
	reg = readl(&pmt->pmt_ctl_d);
	reg |= (3 << 0);	/* GME_SEL [1:0] = 11 SDIO4 */
	writel(reg, &pmt->pmt_ctl_d);

	reg = readl(&pmt->pmt_tri_a);
	reg &= ~Z_ATB;		/* Z_ATB = normal (0) */
	reg &= ~Z_GMA;		/* Z_GMA = normal (0) */
	writel(reg, &pmt->pmt_tri_a);
	reg = readl(&pmt->pmt_tri_b);
	reg &= ~Z_GME;		/* Z_GME = normal (0) */
	writel(reg, &pmt->pmt_tri_b);

	/* SDMMC3 */
	/* SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
	reg = readl(&pmt->pmt_ctl_d);
	reg &= 0xFFFF03FF;
	reg |= (2 << 10);	/* SDB_SEL [11:10] = 01 SDIO3 */
	reg |= (2 << 12);	/* SDC_SEL [13:12] = 01 SDIO3 */
	reg |= (2 << 14);	/* SDD_SEL [15:14] = 01 SDIO3 */
	writel(reg, &pmt->pmt_ctl_d);

	reg = readl(&pmt->pmt_tri_b);
	reg &= ~Z_SDC;		/* Z_SDC = normal (0) */
	reg &= ~Z_SDD;		/* Z_SDD = normal (0) */
	writel(reg, &pmt->pmt_tri_b);
	reg = readl(&pmt->pmt_tri_d);
	reg &= ~Z_SDB;		/* Z_SDB = normal (0) */
	writel(reg, &pmt->pmt_tri_d);
}

/*
 * Routine: clock_init
 * Description: Do individual peripheral clock reset/enables
 */
void clock_init(void)
{
	clock_init_uart();
}

/*
 * Routine: pinmux_init
 * Description: Do individual peripheral pinmux configs
 */
void pinmux_init(void)
{
	pin_mux_uart();
}

/*
 * Routine: gpio_init
 * Description: Do individual peripheral GPIO configs
 */
void gpio_init(void)
{
	gpio_config_uart();
}

/*
 * Routine: board_init
 * Description: Early hardware init.
 */
int board_init(void)
{
	/* boot param addr */
	gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
	/* board id for Linux */
	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;

	return 0;
}

#ifdef CONFIG_TEGRA2_MMC
/* this is a weak define that we are overriding */
int board_mmc_init(bd_t *bd)
{
	debug("board_mmc_init called\n");
	/* Enable clocks, muxes, etc. for SDMMC controllers */
	clock_init_mmc();
	pin_mux_mmc();

	debug("board_mmc_init: init eMMC\n");
	/* init dev 0, eMMC chip, with 4-bit bus */
	tegra2_mmc_init(0, 4);

	debug("board_mmc_init: init SD slot\n");
	/* init dev 1, SD slot, with 4-bit bus */
	tegra2_mmc_init(1, 4);

	return 0;
}

/* this is a weak define that we are overriding */
int board_mmc_getcd(u8 *cd, struct mmc *mmc)
{
	debug("board_mmc_getcd called\n");
	/*
	 * Hard-code CD presence for now. Need to add GPIO inputs
	 * for Seaboard & Harmony (& Kaen/Aebl/Wario?)
	 */
	*cd = 1;
	return 0;
}
#endif