1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
|
/*
* Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <usb.h>
#include <malloc.h>
#include <phys2bus.h>
#include <usbroothubdes.h>
#include <asm/io.h>
#include "dwc2.h"
/* Use only HC channel 0. */
#define DWC2_HC_CHANNEL 0
#define DWC2_STATUS_BUF_SIZE 64
#define DWC2_DATA_BUF_SIZE (64 * 1024)
/* We need doubleword-aligned buffers for DMA transfers */
DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer, DWC2_DATA_BUF_SIZE, 8);
DEFINE_ALIGN_BUFFER(uint8_t, status_buffer, DWC2_STATUS_BUF_SIZE, 8);
#define MAX_DEVICE 16
#define MAX_ENDPOINT 16
static int bulk_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
static int root_hub_devnum;
static struct dwc2_core_regs *regs =
(struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR;
/*
* DWC2 IP interface
*/
static int wait_for_bit(void *reg, const uint32_t mask, bool set)
{
unsigned int timeout = 1000000;
uint32_t val;
while (--timeout) {
val = readl(reg);
if (!set)
val = ~val;
if ((val & mask) == mask)
return 0;
udelay(1);
}
debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
__func__, reg, mask, set);
return -ETIMEDOUT;
}
/*
* Initializes the FSLSPClkSel field of the HCFG register
* depending on the PHY type.
*/
static void init_fslspclksel(struct dwc2_core_regs *regs)
{
uint32_t phyclk;
#if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */
#else
/* High speed PHY running at full speed or high speed */
phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ;
#endif
#ifdef CONFIG_DWC2_ULPI_FS_LS
uint32_t hwcfg2 = readl(®s->ghwcfg2);
uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
if (hval == 2 && fval == 1)
phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */
#endif
clrsetbits_le32(®s->host_regs.hcfg,
DWC2_HCFG_FSLSPCLKSEL_MASK,
phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET);
}
/*
* Flush a Tx FIFO.
*
* @param regs Programming view of DWC_otg controller.
* @param num Tx FIFO to flush.
*/
static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
{
int ret;
writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
®s->grstctl);
ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_TXFFLSH, 0);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Wait for 3 PHY Clocks */
udelay(1);
}
/*
* Flush Rx FIFO.
*
* @param regs Programming view of DWC_otg controller.
*/
static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
{
int ret;
writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl);
ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_RXFFLSH, 0);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Wait for 3 PHY Clocks */
udelay(1);
}
/*
* Do core a soft reset of the core. Be careful with this because it
* resets all the internal state machines of the core.
*/
static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
{
int ret;
/* Wait for AHB master IDLE state. */
ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_AHBIDLE, 1);
if (ret)
printf("%s: Timeout!\n", __func__);
/* Core Soft Reset */
writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl);
ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_CSFTRST, 0);
if (ret)
printf("%s: Timeout!\n", __func__);
/*
* Wait for core to come out of reset.
* NOTE: This long sleep is _very_ important, otherwise the core will
* not stay in host mode after a connector ID change!
*/
mdelay(100);
}
/*
* This function initializes the DWC_otg controller registers for
* host mode.
*
* This function flushes the Tx and Rx FIFOs and it flushes any entries in the
* request queues. Host channels are reset to ensure that they are ready for
* performing transfers.
*
* @param regs Programming view of DWC_otg controller
*
*/
static void dwc_otg_core_host_init(struct dwc2_core_regs *regs)
{
uint32_t nptxfifosize = 0;
uint32_t ptxfifosize = 0;
uint32_t hprt0 = 0;
int i, ret, num_channels;
/* Restart the Phy Clock */
writel(0, ®s->pcgcctl);
/* Initialize Host Configuration Register */
init_fslspclksel(regs);
#ifdef CONFIG_DWC2_DFLT_SPEED_FULL
setbits_le32(®s->host_regs.hcfg, DWC2_HCFG_FSLSSUPP);
#endif
/* Configure data FIFO sizes */
#ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
if (readl(®s->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) {
/* Rx FIFO */
writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, ®s->grxfsiz);
/* Non-periodic Tx FIFO */
nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE <<
DWC2_FIFOSIZE_DEPTH_OFFSET;
nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE <<
DWC2_FIFOSIZE_STARTADDR_OFFSET;
writel(nptxfifosize, ®s->gnptxfsiz);
/* Periodic Tx FIFO */
ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE <<
DWC2_FIFOSIZE_DEPTH_OFFSET;
ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE +
CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
DWC2_FIFOSIZE_STARTADDR_OFFSET;
writel(ptxfifosize, ®s->hptxfsiz);
}
#endif
/* Clear Host Set HNP Enable in the OTG Control Register */
clrbits_le32(®s->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN);
/* Make sure the FIFOs are flushed. */
dwc_otg_flush_tx_fifo(regs, 0x10); /* All Tx FIFOs */
dwc_otg_flush_rx_fifo(regs);
/* Flush out any leftover queued requests. */
num_channels = readl(®s->ghwcfg2);
num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK;
num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET;
num_channels += 1;
for (i = 0; i < num_channels; i++)
clrsetbits_le32(®s->hc_regs[i].hcchar,
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR,
DWC2_HCCHAR_CHDIS);
/* Halt all channels to put them into a known state. */
for (i = 0; i < num_channels; i++) {
clrsetbits_le32(®s->hc_regs[i].hcchar,
DWC2_HCCHAR_EPDIR,
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
ret = wait_for_bit(®s->hc_regs[i].hcchar,
DWC2_HCCHAR_CHEN, 0);
if (ret)
printf("%s: Timeout!\n", __func__);
}
/* Turn on the vbus power. */
if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) {
hprt0 = readl(®s->hprt0);
hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET);
hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
if (!(hprt0 & DWC2_HPRT0_PRTPWR)) {
hprt0 |= DWC2_HPRT0_PRTPWR;
writel(hprt0, ®s->hprt0);
}
}
}
/*
* This function initializes the DWC_otg controller registers and
* prepares the core for device mode or host mode operation.
*
* @param regs Programming view of the DWC_otg controller
*/
static void dwc_otg_core_init(struct dwc2_core_regs *regs)
{
uint32_t ahbcfg = 0;
uint32_t usbcfg = 0;
uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE;
/* Common Initialization */
usbcfg = readl(®s->gusbcfg);
/* Program the ULPI External VBUS bit if needed */
#ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS
usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
#else
usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
#endif
/* Set external TS Dline pulsing */
#ifdef CONFIG_DWC2_TS_DLINE
usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
#else
usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
#endif
writel(usbcfg, ®s->gusbcfg);
/* Reset the Controller */
dwc_otg_core_reset(regs);
/*
* This programming sequence needs to happen in FS mode before
* any other programming occurs
*/
#if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \
(CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
/* If FS mode with FS PHY */
setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_PHYSEL);
/* Reset after a PHY select */
dwc_otg_core_reset(regs);
/*
* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.
* Also do this on HNP Dev/Host mode switches (done in dev_init
* and host_init).
*/
if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
init_fslspclksel(regs);
#ifdef CONFIG_DWC2_I2C_ENABLE
/* Program GUSBCFG.OtgUtmifsSel to I2C */
setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL);
/* Program GI2CCTL.I2CEn */
clrsetbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN |
DWC2_GI2CCTL_I2CDEVADDR_MASK,
1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET);
setbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN);
#endif
#else
/* High speed PHY. */
/*
* HS PHY parameters. These parameters are preserved during
* soft reset so only program the first time. Do a soft reset
* immediately after setting phyif.
*/
usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF);
usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET;
if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) { /* ULPI interface */
#ifdef CONFIG_DWC2_PHY_ULPI_DDR
usbcfg |= DWC2_GUSBCFG_DDRSEL;
#else
usbcfg &= ~DWC2_GUSBCFG_DDRSEL;
#endif
} else { /* UTMI+ interface */
#if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16)
usbcfg |= DWC2_GUSBCFG_PHYIF;
#endif
}
writel(usbcfg, ®s->gusbcfg);
/* Reset after setting the PHY parameters */
dwc_otg_core_reset(regs);
#endif
usbcfg = readl(®s->gusbcfg);
usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M);
#ifdef CONFIG_DWC2_ULPI_FS_LS
uint32_t hwcfg2 = readl(®s->ghwcfg2);
uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
if (hval == 2 && fval == 1) {
usbcfg |= DWC2_GUSBCFG_ULPI_FSLS;
usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M;
}
#endif
writel(usbcfg, ®s->gusbcfg);
/* Program the GAHBCFG Register. */
switch (readl(®s->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) {
case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY:
break;
case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA:
while (brst_sz > 1) {
ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET);
ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK;
brst_sz >>= 1;
}
#ifdef CONFIG_DWC2_DMA_ENABLE
ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
#endif
break;
case DWC2_HWCFG2_ARCHITECTURE_INT_DMA:
ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4;
#ifdef CONFIG_DWC2_DMA_ENABLE
ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
#endif
break;
}
writel(ahbcfg, ®s->gahbcfg);
/* Program the GUSBCFG register for HNP/SRP. */
setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP);
#ifdef CONFIG_DWC2_IC_USB_CAP
setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_IC_USB_CAP);
#endif
}
/*
* Prepares a host channel for transferring packets to/from a specific
* endpoint. The HCCHARn register is set up with the characteristics specified
* in _hc. Host channel interrupts that may need to be serviced while this
* transfer is in progress are enabled.
*
* @param regs Programming view of DWC_otg controller
* @param hc Information needed to initialize the host channel
*/
static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num,
struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num,
uint8_t ep_is_in, uint8_t ep_type, uint16_t max_packet)
{
struct dwc2_hc_regs *hc_regs = ®s->hc_regs[hc_num];
uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) |
(ep_num << DWC2_HCCHAR_EPNUM_OFFSET) |
(ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) |
(ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) |
(max_packet << DWC2_HCCHAR_MPS_OFFSET);
if (dev->speed == USB_SPEED_LOW)
hcchar |= DWC2_HCCHAR_LSPDDEV;
/* Clear old interrupt conditions for this host channel. */
writel(0x3fff, &hc_regs->hcint);
/*
* Program the HCCHARn register with the endpoint characteristics
* for the current transfer.
*/
writel(hcchar, &hc_regs->hcchar);
/* Program the HCSPLIT register for SPLITs */
writel(0, &hc_regs->hcsplt);
}
/*
* DWC2 to USB API interface
*/
/* Direction: In ; Request: Status */
static int dwc_otg_submit_rh_msg_in_status(struct usb_device *dev, void *buffer,
int txlen, struct devrequest *cmd)
{
uint32_t hprt0 = 0;
uint32_t port_status = 0;
uint32_t port_change = 0;
int len = 0;
int stat = 0;
switch (cmd->requesttype & ~USB_DIR_IN) {
case 0:
*(uint16_t *)buffer = cpu_to_le16(1);
len = 2;
break;
case USB_RECIP_INTERFACE:
case USB_RECIP_ENDPOINT:
*(uint16_t *)buffer = cpu_to_le16(0);
len = 2;
break;
case USB_TYPE_CLASS:
*(uint32_t *)buffer = cpu_to_le32(0);
len = 4;
break;
case USB_RECIP_OTHER | USB_TYPE_CLASS:
hprt0 = readl(®s->hprt0);
if (hprt0 & DWC2_HPRT0_PRTCONNSTS)
port_status |= USB_PORT_STAT_CONNECTION;
if (hprt0 & DWC2_HPRT0_PRTENA)
port_status |= USB_PORT_STAT_ENABLE;
if (hprt0 & DWC2_HPRT0_PRTSUSP)
port_status |= USB_PORT_STAT_SUSPEND;
if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT)
port_status |= USB_PORT_STAT_OVERCURRENT;
if (hprt0 & DWC2_HPRT0_PRTRST)
port_status |= USB_PORT_STAT_RESET;
if (hprt0 & DWC2_HPRT0_PRTPWR)
port_status |= USB_PORT_STAT_POWER;
if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == DWC2_HPRT0_PRTSPD_LOW)
port_status |= USB_PORT_STAT_LOW_SPEED;
else if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) ==
DWC2_HPRT0_PRTSPD_HIGH)
port_status |= USB_PORT_STAT_HIGH_SPEED;
if (hprt0 & DWC2_HPRT0_PRTENCHNG)
port_change |= USB_PORT_STAT_C_ENABLE;
if (hprt0 & DWC2_HPRT0_PRTCONNDET)
port_change |= USB_PORT_STAT_C_CONNECTION;
if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG)
port_change |= USB_PORT_STAT_C_OVERCURRENT;
*(uint32_t *)buffer = cpu_to_le32(port_status |
(port_change << 16));
len = 4;
break;
default:
puts("unsupported root hub command\n");
stat = USB_ST_STALLED;
}
dev->act_len = min(len, txlen);
dev->status = stat;
return stat;
}
/* Direction: In ; Request: Descriptor */
static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev,
void *buffer, int txlen,
struct devrequest *cmd)
{
unsigned char data[32];
uint32_t dsc;
int len = 0;
int stat = 0;
uint16_t wValue = cpu_to_le16(cmd->value);
uint16_t wLength = cpu_to_le16(cmd->length);
switch (cmd->requesttype & ~USB_DIR_IN) {
case 0:
switch (wValue & 0xff00) {
case 0x0100: /* device descriptor */
len = min3(txlen, (int)sizeof(root_hub_dev_des), (int)wLength);
memcpy(buffer, root_hub_dev_des, len);
break;
case 0x0200: /* configuration descriptor */
len = min3(txlen, (int)sizeof(root_hub_config_des), (int)wLength);
memcpy(buffer, root_hub_config_des, len);
break;
case 0x0300: /* string descriptors */
switch (wValue & 0xff) {
case 0x00:
len = min3(txlen, (int)sizeof(root_hub_str_index0),
(int)wLength);
memcpy(buffer, root_hub_str_index0, len);
break;
case 0x01:
len = min3(txlen, (int)sizeof(root_hub_str_index1),
(int)wLength);
memcpy(buffer, root_hub_str_index1, len);
break;
}
break;
default:
stat = USB_ST_STALLED;
}
break;
case USB_TYPE_CLASS:
/* Root port config, set 1 port and nothing else. */
dsc = 0x00000001;
data[0] = 9; /* min length; */
data[1] = 0x29;
data[2] = dsc & RH_A_NDP;
data[3] = 0;
if (dsc & RH_A_PSM)
data[3] |= 0x1;
if (dsc & RH_A_NOCP)
data[3] |= 0x10;
else if (dsc & RH_A_OCPM)
data[3] |= 0x8;
/* corresponds to data[4-7] */
data[5] = (dsc & RH_A_POTPGT) >> 24;
data[7] = dsc & RH_B_DR;
if (data[2] < 7) {
data[8] = 0xff;
} else {
data[0] += 2;
data[8] = (dsc & RH_B_DR) >> 8;
data[9] = 0xff;
data[10] = data[9];
}
len = min3(txlen, (int)data[0], (int)wLength);
memcpy(buffer, data, len);
break;
default:
puts("unsupported root hub command\n");
stat = USB_ST_STALLED;
}
dev->act_len = min(len, txlen);
dev->status = stat;
return stat;
}
/* Direction: In ; Request: Configuration */
static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev,
void *buffer, int txlen,
struct devrequest *cmd)
{
int len = 0;
int stat = 0;
switch (cmd->requesttype & ~USB_DIR_IN) {
case 0:
*(uint8_t *)buffer = 0x01;
len = 1;
break;
default:
puts("unsupported root hub command\n");
stat = USB_ST_STALLED;
}
dev->act_len = min(len, txlen);
dev->status = stat;
return stat;
}
/* Direction: In */
static int dwc_otg_submit_rh_msg_in(struct usb_device *dev,
void *buffer, int txlen,
struct devrequest *cmd)
{
switch (cmd->request) {
case USB_REQ_GET_STATUS:
return dwc_otg_submit_rh_msg_in_status(dev, buffer,
txlen, cmd);
case USB_REQ_GET_DESCRIPTOR:
return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer,
txlen, cmd);
case USB_REQ_GET_CONFIGURATION:
return dwc_otg_submit_rh_msg_in_configuration(dev, buffer,
txlen, cmd);
default:
puts("unsupported root hub command\n");
return USB_ST_STALLED;
}
}
/* Direction: Out */
static int dwc_otg_submit_rh_msg_out(struct usb_device *dev,
void *buffer, int txlen,
struct devrequest *cmd)
{
int len = 0;
int stat = 0;
uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8);
uint16_t wValue = cpu_to_le16(cmd->value);
switch (bmrtype_breq & ~USB_DIR_IN) {
case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT:
case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS:
break;
case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
switch (wValue) {
case USB_PORT_FEAT_C_CONNECTION:
setbits_le32(®s->hprt0, DWC2_HPRT0_PRTCONNDET);
break;
}
break;
case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
break;
case USB_PORT_FEAT_RESET:
clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET |
DWC2_HPRT0_PRTENCHNG |
DWC2_HPRT0_PRTOVRCURRCHNG,
DWC2_HPRT0_PRTRST);
mdelay(50);
clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTRST);
break;
case USB_PORT_FEAT_POWER:
clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET |
DWC2_HPRT0_PRTENCHNG |
DWC2_HPRT0_PRTOVRCURRCHNG,
DWC2_HPRT0_PRTRST);
break;
case USB_PORT_FEAT_ENABLE:
break;
}
break;
case (USB_REQ_SET_ADDRESS << 8):
root_hub_devnum = wValue;
break;
case (USB_REQ_SET_CONFIGURATION << 8):
break;
default:
puts("unsupported root hub command\n");
stat = USB_ST_STALLED;
}
len = min(len, txlen);
dev->act_len = len;
dev->status = stat;
return stat;
}
static int dwc_otg_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int txlen,
struct devrequest *cmd)
{
int stat = 0;
if (usb_pipeint(pipe)) {
puts("Root-Hub submit IRQ: NOT implemented\n");
return 0;
}
if (cmd->requesttype & USB_DIR_IN)
stat = dwc_otg_submit_rh_msg_in(dev, buffer, txlen, cmd);
else
stat = dwc_otg_submit_rh_msg_out(dev, buffer, txlen, cmd);
mdelay(1);
return stat;
}
int wait_for_chhltd(uint32_t *sub, int *toggle, bool ignore_ack)
{
uint32_t hcint_comp_hlt_ack = DWC2_HCINT_XFERCOMP | DWC2_HCINT_CHHLTD;
struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL];
int ret;
uint32_t hcint, hctsiz;
ret = wait_for_bit(&hc_regs->hcint, DWC2_HCINT_CHHLTD, true);
if (ret)
return ret;
hcint = readl(&hc_regs->hcint);
if (hcint & (DWC2_HCINT_NAK | DWC2_HCINT_FRMOVRUN))
return -EAGAIN;
if (ignore_ack)
hcint &= ~DWC2_HCINT_ACK;
else
hcint_comp_hlt_ack |= DWC2_HCINT_ACK;
if (hcint != hcint_comp_hlt_ack) {
debug("%s: Error (HCINT=%08x)\n", __func__, hcint);
return -EINVAL;
}
hctsiz = readl(&hc_regs->hctsiz);
*sub = (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) >>
DWC2_HCTSIZ_XFERSIZE_OFFSET;
*toggle = (hctsiz & DWC2_HCTSIZ_PID_MASK) >> DWC2_HCTSIZ_PID_OFFSET;
debug("%s: sub=%u toggle=%d\n", __func__, *sub, *toggle);
return 0;
}
static int dwc2_eptype[] = {
DWC2_HCCHAR_EPTYPE_ISOC,
DWC2_HCCHAR_EPTYPE_INTR,
DWC2_HCCHAR_EPTYPE_CONTROL,
DWC2_HCCHAR_EPTYPE_BULK,
};
int chunk_msg(struct usb_device *dev, unsigned long pipe, int *pid, int in,
void *buffer, int len, bool ignore_ack)
{
struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL];
int devnum = usb_pipedevice(pipe);
int ep = usb_pipeendpoint(pipe);
int max = usb_maxpacket(dev, pipe);
int eptype = dwc2_eptype[usb_pipetype(pipe)];
int done = 0;
int ret = 0;
uint32_t sub;
uint32_t xfer_len;
uint32_t num_packets;
int stop_transfer = 0;
debug("%s: msg: pipe %lx pid %d in %d len %d\n", __func__, pipe, *pid,
in, len);
do {
/* Initialize channel */
dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, dev, devnum, ep, in,
eptype, max);
xfer_len = len - done;
if (xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE)
xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE - max + 1;
if (xfer_len > DWC2_DATA_BUF_SIZE)
xfer_len = DWC2_DATA_BUF_SIZE - max + 1;
/* Make sure that xfer_len is a multiple of max packet size. */
if (xfer_len > 0) {
num_packets = (xfer_len + max - 1) / max;
if (num_packets > CONFIG_DWC2_MAX_PACKET_COUNT) {
num_packets = CONFIG_DWC2_MAX_PACKET_COUNT;
xfer_len = num_packets * max;
}
} else {
num_packets = 1;
}
if (in)
xfer_len = num_packets * max;
debug("%s: chunk: pid %d xfer_len %u pkts %u\n", __func__,
*pid, xfer_len, num_packets);
writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
(num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) |
(*pid << DWC2_HCTSIZ_PID_OFFSET),
&hc_regs->hctsiz);
if (!in)
memcpy(aligned_buffer, (char *)buffer + done, len);
writel(phys_to_bus((unsigned long)aligned_buffer),
&hc_regs->hcdma);
/* Set host channel enable after all other setup is complete. */
clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
(1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
DWC2_HCCHAR_CHEN);
ret = wait_for_chhltd(&sub, pid, ignore_ack);
if (ret)
break;
if (in) {
xfer_len -= sub;
memcpy(buffer + done, aligned_buffer, xfer_len);
if (sub)
stop_transfer = 1;
}
done += xfer_len;
} while ((done < len) && !stop_transfer);
writel(0, &hc_regs->hcintmsk);
writel(0xFFFFFFFF, &hc_regs->hcint);
dev->status = 0;
dev->act_len = done;
return ret;
}
/* U-Boot USB transmission interface */
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int len)
{
int devnum = usb_pipedevice(pipe);
int ep = usb_pipeendpoint(pipe);
if (devnum == root_hub_devnum) {
dev->status = 0;
return -EINVAL;
}
return chunk_msg(dev, pipe, &bulk_data_toggle[devnum][ep],
usb_pipein(pipe), buffer, len, true);
}
int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int len, struct devrequest *setup)
{
int devnum = usb_pipedevice(pipe);
int pid, ret, act_len;
/* For CONTROL endpoint pid should start with DATA1 */
int status_direction;
if (devnum == root_hub_devnum) {
dev->status = 0;
dev->speed = USB_SPEED_HIGH;
return dwc_otg_submit_rh_msg(dev, pipe, buffer, len, setup);
}
pid = DWC2_HC_PID_SETUP;
ret = chunk_msg(dev, pipe, &pid, 0, setup, 8, true);
if (ret)
return ret;
if (buffer) {
pid = DWC2_HC_PID_DATA1;
ret = chunk_msg(dev, pipe, &pid, usb_pipein(pipe), buffer,
len, false);
if (ret)
return ret;
act_len = dev->act_len;
} /* End of DATA stage */
else
act_len = 0;
/* STATUS stage */
if ((len == 0) || usb_pipeout(pipe))
status_direction = 1;
else
status_direction = 0;
pid = DWC2_HC_PID_DATA1;
ret = chunk_msg(dev, pipe, &pid, status_direction, status_buffer, 0,
false);
if (ret)
return ret;
dev->act_len = act_len;
return 0;
}
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int len, int interval)
{
unsigned long timeout;
int ret;
/* FIXME: what is interval? */
timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
for (;;) {
if (get_timer(0) > timeout) {
printf("Timeout poll on interrupt endpoint\n");
return -ETIMEDOUT;
}
ret = submit_bulk_msg(dev, pipe, buffer, len);
if (ret != -EAGAIN)
return ret;
}
}
/* U-Boot USB control interface */
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
uint32_t snpsid;
int i, j;
root_hub_devnum = 0;
/* board dependant init */
if (board_usb_init(index, USB_INIT_HOST))
return -1;
snpsid = readl(®s->gsnpsid);
printf("Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff);
if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx &&
(snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_3xx) {
printf("SNPSID invalid (not DWC2 OTG device): %08x\n", snpsid);
return -ENODEV;
}
dwc_otg_core_init(regs);
dwc_otg_core_host_init(regs);
clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
DWC2_HPRT0_PRTOVRCURRCHNG,
DWC2_HPRT0_PRTRST);
mdelay(50);
clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG |
DWC2_HPRT0_PRTRST);
for (i = 0; i < MAX_DEVICE; i++) {
for (j = 0; j < MAX_ENDPOINT; j++)
bulk_data_toggle[i][j] = DWC2_HC_PID_DATA0;
}
return 0;
}
int usb_lowlevel_stop(int index)
{
/* Put everything in reset. */
clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA |
DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
DWC2_HPRT0_PRTOVRCURRCHNG,
DWC2_HPRT0_PRTRST);
return 0;
}
|