1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
config VIDEO_VESA
bool "Enable VESA video driver support"
depends on X86
default n
help
Turn on this option to enable a very simple driver which uses vesa
to discover the video mode and then provides a frame buffer for use
by U-Boot. This can in principle be used with any platform that
supports PCI and video cards that support VESA BIOS Extension (VBE).
config VIDEO_LCD_SSD2828
bool "SSD2828 bridge chip"
default n
---help---
Support for the SSD2828 bridge chip, which can take pixel data coming
from a parallel LCD interface and translate it on the fly into MIPI DSI
interface for driving a MIPI compatible LCD panel. It uses SPI for
configuration.
config VIDEO_LCD_SSD2828_TX_CLK
int "SSD2828 TX_CLK frequency (in MHz)"
depends on VIDEO_LCD_SSD2828
default 0
---help---
The frequency of the crystal, which is clocking SSD2828. It may be
anything in the 8MHz-30MHz range and the exact value should be
retrieved from the board schematics. Or in the case of Allwinner
hardware, it can be usually found as 'lcd_xtal_freq' variable in
FEX files. It can be also set to 0 for selecting PCLK from the
parallel LCD interface instead of TX_CLK as the PLL clock source.
config VIDEO_LCD_SSD2828_RESET
string "RESET pin of SSD2828"
depends on VIDEO_LCD_SSD2828
default ""
---help---
The reset pin of SSD2828 chip. This takes a string in the format
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_HITACHI_TX18D42VM
bool "Hitachi tx18d42vm LVDS LCD panel support"
depends on VIDEO
default n
---help---
Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a
lcd controller which needs to be initialized over SPI, once that is
done they work like a regular LVDS panel.
config VIDEO_LCD_SPI_CS
string "SPI CS pin for LCD related config job"
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
default ""
---help---
This is one of the SPI communication pins, involved in setting up a
working LCD configuration. The exact role of SPI may differ for
different hardware setups. The option takes a string in the format
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_SPI_SCLK
string "SPI SCLK pin for LCD related config job"
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
default ""
---help---
This is one of the SPI communication pins, involved in setting up a
working LCD configuration. The exact role of SPI may differ for
different hardware setups. The option takes a string in the format
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_SPI_MOSI
string "SPI MOSI pin for LCD related config job"
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
default ""
---help---
This is one of the SPI communication pins, involved in setting up a
working LCD configuration. The exact role of SPI may differ for
different hardware setups. The option takes a string in the format
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
config VIDEO_LCD_SPI_MISO
string "SPI MISO pin for LCD related config job (optional)"
depends on VIDEO_LCD_SSD2828
default ""
---help---
This is one of the SPI communication pins, involved in setting up a
working LCD configuration. The exact role of SPI may differ for
different hardware setups. If wired up, this pin may provide additional
useful functionality. Such as bi-directional communication with the
hardware and LCD panel id retrieval (if the panel can report it). The
option takes a string in the format understood by 'name_to_gpio'
function, e.g. PH1 for pin 1 of port H.
config DISPLAY_PORT
bool "Enable DisplayPort support"
help
eDP (Embedded DisplayPort) is a standard widely used in laptops
to drive LCD panels. This framework provides support for enabling
these displays where supported by the video hardware.
config VIDEO_TEGRA124
bool "Enable video support on Tegra124"
help
Tegra124 supports many video output options including eDP and
HDMI. At present only eDP is supported by U-Boot. This option
enables this support which can be used on devices which
have an eDP display connected.
|
