Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xx

8 files changed, 128 insertions, 138 deletions

diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 9cee9f1..6665e7f 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -29,14 +29,13 @@ endif
 
 LIB	= $(obj)lib$(VENDOR).a
 
-COBJS	:= sys_eeprom.o	\
-	   pixis.o	\
-	   pq-mds-pib.o \
-	   fsl_logo_bmp.o \
-	   fsl_diu_fb.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
+COBJS-${CONFIG_PQ_MDS_PIB}	+= pq-mds-pib.o
+COBJS-${CONFIG_ID_EEPROM}	+= sys_eeprom.o
+COBJS-${CONFIG_FSL_DIU_FB}	+= fsl_diu_fb.o fsl_logo_bmp.o
+COBJS-${CONFIG_FSL_PIXIS}	+= pixis.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(obj).depend $(OBJS)
diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c
index 5a8576e..2336f6b 100644
--- a/board/freescale/common/fsl_diu_fb.c
+++ b/board/freescale/common/fsl_diu_fb.c
@@ -27,8 +27,6 @@
 #include <i2c.h>
 #include <malloc.h>
 
-#ifdef CONFIG_FSL_DIU_FB
-
 #include "fsl_diu_fb.h"
 
 #ifdef DEBUG
@@ -615,4 +613,3 @@ void fsl_diu_clear_screen(void)
 
 	memset(info->screen_base, 0, info->smem_len);
 }
-#endif /* CONFIG_FSL_DIU_FB */
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index 45dcf4d..bff6a82 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -25,9 +25,8 @@
 #include <common.h>
 #include <command.h>
 #include <watchdog.h>
-
-#ifdef CONFIG_FSL_PIXIS
 #include <asm/cache.h>
+
 #include "pixis.h"
 
 
@@ -184,7 +183,7 @@ int set_px_corepll(ulong corepll)
 
 void read_from_px_regs(int set)
 {
-	u8 mask = 0x1C;
+	u8 mask = 0x1C;	/* COREPLL, MPXPLL, SYSCLK controlled by PIXIS */
 	u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN0);
 
 	if (set)
@@ -197,7 +196,7 @@ void read_from_px_regs(int set)
 
 void read_from_px_regs_altbank(int set)
 {
-	u8 mask = 0x04;
+	u8 mask = 0x04;	/* FLASHBANK and FLASHMAP controlled by PIXIS */
 	u8 tmp = in8(PIXIS_BASE + PIXIS_VCFGEN1);
 
 	if (set)
@@ -208,15 +207,26 @@ void read_from_px_regs_altbank(int set)
 }
 
 #ifndef CFG_PIXIS_VBOOT_MASK
-#define CFG_PIXIS_VBOOT_MASK	0x40
+#define CFG_PIXIS_VBOOT_MASK	(0x40)
 #endif
 
+void clear_altbank(void)
+{
+	u8 tmp;
+
+	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
+	tmp &= ~CFG_PIXIS_VBOOT_MASK;
+
+	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
+}
+
+
 void set_altbank(void)
 {
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp ^= CFG_PIXIS_VBOOT_MASK;
+	tmp |= CFG_PIXIS_VBOOT_MASK;
 
 	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
 }
@@ -227,11 +237,11 @@ void set_px_go(void)
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
-	tmp = tmp & 0x1E;
+	tmp = tmp & 0x1E;			/* clear GO bit */
 	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
 
 	tmp = in8(PIXIS_BASE + PIXIS_VCTL);
-	tmp = tmp | 0x01;
+	tmp = tmp | 0x01;	/* set GO bit - start reset sequencer */
 	out8(PIXIS_BASE + PIXIS_VCTL, tmp);
 }
 
@@ -293,7 +303,7 @@ static ulong strfractoint(uchar *strptr)
 	 * simply create the intarr.
 	 */
 	i = 0;
-	while (strptr[i] != 46) {
+	while (strptr[i] != '.') {
 		if (strptr[i] == 0) {
 			no_dec = 1;
 			break;
@@ -313,7 +323,7 @@ static ulong strfractoint(uchar *strptr)
 	} else {
 		j = 0;
 		i++;		/* Skipping the decimal point */
-		while ((strptr[i] > 47) && (strptr[i] < 58)) {
+		while ((strptr[i] >= '0') && (strptr[i] <= '9')) {
 			decarr[j] = strptr[i];
 			i++;
 			j++;
@@ -340,8 +350,14 @@ static ulong strfractoint(uchar *strptr)
 int
 pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	ulong val;
-	ulong corepll;
+	unsigned int i;
+	char *p_cf = NULL;
+	char *p_cf_sysclk = NULL;
+	char *p_cf_corepll = NULL;
+	char *p_cf_mpxpll = NULL;
+	char *p_altbank = NULL;
+	char *p_wd = NULL;
+	unsigned int unknown_param = 0;
 
 	/*
 	 * No args is a simple reset request.
@@ -351,116 +367,97 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		/* not reached */
 	}
 
-	if (strcmp(argv[1], "cf") == 0) {
+	for (i = 1; i < argc; i++) {
+		if (strcmp(argv[i], "cf") == 0) {
+			p_cf = argv[i];
+			if (i + 3 >= argc) {
+				break;
+			}
+			p_cf_sysclk = argv[i+1];
+			p_cf_corepll = argv[i+2];
+			p_cf_mpxpll = argv[i+3];
+			i += 3;
+			continue;
+		}
 
-		/*
-		 * Reset with frequency changed:
-		 *    cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
-		 */
-		if (argc < 5) {
-			puts(cmdtp->usage);
-			return 1;
+		if (strcmp(argv[i], "altbank") == 0) {
+			p_altbank = argv[i];
+			continue;
 		}
 
-		read_from_px_regs(0);
-
-		val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
-
-		corepll = strfractoint((uchar *)argv[3]);
-		val = val + set_px_corepll(corepll);
-		val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
-		if (val == 3) {
-			puts("Setting registers VCFGEN0 and VCTL\n");
-			read_from_px_regs(1);
-			puts("Resetting board with values from ");
-			puts("VSPEED0, VSPEED1, VCLKH, and VCLKL \n");
-			set_px_go();
-		} else {
-			puts(cmdtp->usage);
-			return 1;
+		if (strcmp(argv[i], "wd") == 0) {
+			p_wd = argv[i];
+			continue;
 		}
 
-		while (1) ;	/* Not reached */
-
-	} else if (strcmp(argv[1], "altbank") == 0) {
-
-		/*
-		 * Reset using alternate flash bank:
-		 */
-		if (argv[2] == 0) {
-			/*
-			 * Reset from alternate bank without changing
-			 * frequency and without watchdog timer enabled.
-			 *	altbank
-			 */
-			read_from_px_regs(0);
-			read_from_px_regs_altbank(0);
-			if (argc > 2) {
-				puts(cmdtp->usage);
-				return 1;
-			}
-			puts("Setting registers VCFGNE1, VBOOT, and VCTL\n");
-			set_altbank();
-			read_from_px_regs_altbank(1);
-			puts("Resetting board to boot from the other bank.\n");
-			set_px_go();
-
-		} else if (strcmp(argv[2], "cf") == 0) {
-			/*
-			 * Reset with frequency changed
-			 *    altbank cf <SYSCLK freq> <COREPLL ratio>
-			 *				<MPXPLL ratio>
-			 */
-			read_from_px_regs(0);
-			read_from_px_regs_altbank(0);
-			val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
-			corepll = strfractoint((uchar *)argv[4]);
-			val = val + set_px_corepll(corepll);
-			val = val + set_px_mpxpll(simple_strtoul(argv[5],
-								 NULL, 10));
-			if (val == 3) {
-				puts("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
-				set_altbank();
-				read_from_px_regs(1);
-				read_from_px_regs_altbank(1);
-				puts("Enabling watchdog timer on the FPGA\n");
-				puts("Resetting board with values from ");
-				puts("VSPEED0, VSPEED1, VCLKH and VCLKL ");
-				puts("to boot from the other bank.\n");
-				set_px_go_with_watchdog();
-			} else {
-				puts(cmdtp->usage);
-				return 1;
-			}
+		unknown_param = 1;
+	}
 
-			while (1) ;	/* Not reached */
-
-		} else if (strcmp(argv[2], "wd") == 0) {
-			/*
-			 * Reset from alternate bank without changing
-			 * frequencies but with watchdog timer enabled:
-			 *    altbank wd
-			 */
-			read_from_px_regs(0);
-			read_from_px_regs_altbank(0);
-			puts("Setting registers VCFGEN1, VBOOT, and VCTL\n");
-			set_altbank();
-			read_from_px_regs_altbank(1);
-			puts("Enabling watchdog timer on the FPGA\n");
-			puts("Resetting board to boot from the other bank.\n");
-			set_px_go_with_watchdog();
-			while (1) ;	/* Not reached */
-
-		} else {
-			puts(cmdtp->usage);
+	/*
+	 * Check that cf has all required parms
+	 */
+	if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
+	    || 	unknown_param) {
+		puts(cmdtp->help);
+		return 1;
+	}
+
+	/*
+	 * PIXIS seems to be sensitive to the ordering of
+	 * the registers that are touched.
+	 */
+	read_from_px_regs(0);
+
+	if (p_altbank) {
+		read_from_px_regs_altbank(0);
+	}
+	clear_altbank();
+
+	/*
+	 * Clock configuration specified.
+	 */
+	if (p_cf) {
+		unsigned long sysclk;
+		unsigned long corepll;
+		unsigned long mpxpll;
+
+		sysclk = simple_strtoul(p_cf_sysclk, NULL, 10);
+		corepll = strfractoint((uchar *) p_cf_corepll);
+		mpxpll = simple_strtoul(p_cf_mpxpll, NULL, 10);
+
+		if (!(set_px_sysclk(sysclk)
+		      && set_px_corepll(corepll)
+		      && set_px_mpxpll(mpxpll))) {
+			puts(cmdtp->help);
 			return 1;
 		}
+		read_from_px_regs(1);
+	}
+
+	/*
+	 * Altbank specified
+	 *
+	 * NOTE CHANGE IN BEHAVIOR: previous code would default
+	 * to enabling watchdog if altbank is specified.
+	 * Now the watchdog must be enabled explicitly using 'wd'.
+	 */
+	if (p_altbank) {
+		set_altbank();
+		read_from_px_regs_altbank(1);
+	}
 
+	/*
+	 * Reset with watchdog specified.
+	 */
+	if (p_wd) {
+		set_px_go_with_watchdog();
 	} else {
-		puts(cmdtp->usage);
-		return 1;
+		set_px_go();
 	}
 
+	/*
+	 * Shouldn't be reached.
+	 */
 	return 0;
 }
 
@@ -474,4 +471,3 @@ U_BOOT_CMD(
 	"    pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
 	"    pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
 	);
-#endif /* CONFIG_FSL_PIXIS */
diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c
index e4f96e8..6c72aa1 100644
--- a/board/freescale/common/pq-mds-pib.c
+++ b/board/freescale/common/pq-mds-pib.c
@@ -12,8 +12,6 @@
 #include <i2c.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_PQ_MDS_PIB
-
 #include "pq-mds-pib.h"
 
 int pib_init(void)
@@ -102,4 +100,3 @@ int pib_init(void)
 	i2c_set_bus_num(orig_i2c_bus);
 	return 0;
 }
-#endif /* CONFIG_PQ_MDS_PIB */
diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index 7bc663b..bb91e67 100644
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -27,7 +27,6 @@
 #include <i2c.h>
 #include <linux/ctype.h>
 
-#ifdef CFG_ID_EEPROM
 typedef struct {
 	unsigned char id[4];		/* 0x0000 - 0x0003 */
 	unsigned char sn[12];		/* 0x0004 - 0x000F */
@@ -253,4 +252,3 @@ int mac_read_from_eeprom(void)
 	}
 	return 0;
 }
-#endif /* CFG_ID_EEPROM */
diff --git a/board/freescale/mpc8610hpcd/Makefile b/board/freescale/mpc8610hpcd/Makefile
index 76087c1..12a92ae 100644
--- a/board/freescale/mpc8610hpcd/Makefile
+++ b/board/freescale/mpc8610hpcd/Makefile
@@ -27,14 +27,14 @@ endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o \
-	../common/sys_eeprom.o \
-	../common/pixis.o \
-	mpc8610hpcd_diu.o \
-	../common/fsl_diu_fb.o
-
 SOBJS	:= init.o
 
+COBJS	:= $(BOARD).o
+
+COBJS-${CONFIG_FSL_DIU_FB}	+= mpc8610hpcd_diu.o
+
+COBJS	+= ${COBJS-y}
+
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index eb6ccb6..ac4b3e1 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -141,6 +141,9 @@
 #endif
 
 #define CFG_ID_EEPROM
+#ifdef CFG_ID_EEPROM
+#define CONFIG_ID_EEPROM
+#endif
 #define ID_EEPROM_ADDR		0x57
 
 
@@ -312,11 +315,8 @@
 #define CONFIG_CMD_NET
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
 
-#define CONFIG_RTL8139
-#define CONFIG_SK98
-#define CONFIG_EEPRO100
-#define CONFIG_TULIP
-#ifdef CONFIG_TULIP
+#define CONFIG_ULI526X
+#ifdef CONFIG_ULI526X
 #define CONFIG_ETHADDR   00:E0:0C:00:00:01
 #endif
 
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 7f485c6..ab875f0 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -152,6 +152,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #define CFG_ID_EEPROM	1
+#ifdef CFG_ID_EEPROM
+#define CONFIG_ID_EEPROM
+#endif
 #define ID_EEPROM_ADDR 0x57
 
 /*