diff options
author | Simon Glass <sjg@chromium.org> | 2015-08-31 01:18:55 (GMT) |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-09-11 18:06:44 (GMT) |
commit | 679d4456e97bfe96a45e8ec36758b579ba9a46c3 (patch) | |
tree | cef609d0ab26820d61204b537bf72be57b6c6b89 | |
parent | 437bc42e7ff930dc4d4bd47199d2e823cf84bf4c (diff) | |
download | u-boot-fsl-qoriq-679d4456e97bfe96a45e8ec36758b579ba9a46c3.tar.xz |
arm: Remove balloon3 board
This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg@chromium.org>
-rw-r--r-- | arch/arm/Kconfig | 5 | ||||
-rw-r--r-- | arch/arm/include/asm/mach-types.h | 13 | ||||
-rw-r--r-- | board/balloon3/Kconfig | 9 | ||||
-rw-r--r-- | board/balloon3/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/balloon3/Makefile | 9 | ||||
-rw-r--r-- | board/balloon3/balloon3.c | 221 | ||||
-rw-r--r-- | configs/balloon3_defconfig | 6 | ||||
-rw-r--r-- | include/configs/balloon3.h | 242 |
8 files changed, 0 insertions, 511 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8085a24..a501f15 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -662,10 +662,6 @@ config TARGET_LS1021ATWR select CPU_V7 select SUPPORT_SPL -config TARGET_BALLOON3 - bool "Support balloon3" - select CPU_PXA - config TARGET_H2200 bool "Support h2200" select CPU_PXA @@ -809,7 +805,6 @@ source "board/Marvell/gplugd/Kconfig" source "board/armadeus/apf27/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" -source "board/balloon3/Kconfig" source "board/bluegiga/apx4devkit/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index e72184b..b1caa16 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -197,7 +197,6 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_SMDK2412 1009 #define MACH_TYPE_SMDK2413 1022 #define MACH_TYPE_AML_M5900 1024 -#define MACH_TYPE_BALLOON3 1029 #define MACH_TYPE_ECBAT91 1072 #define MACH_TYPE_ONEARM 1075 #define MACH_TYPE_SMDK2443 1084 @@ -3332,18 +3331,6 @@ extern unsigned int __machine_arch_type; # define machine_is_aml_m5900() (0) #endif -#ifdef CONFIG_MACH_BALLOON3 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_BALLOON3 -# endif -# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3) -#else -# define machine_is_balloon3() (0) -#endif - #ifdef CONFIG_MACH_ECBAT91 # ifdef machine_arch_type # undef machine_arch_type diff --git a/board/balloon3/Kconfig b/board/balloon3/Kconfig deleted file mode 100644 index 53b7a9a..0000000 --- a/board/balloon3/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_BALLOON3 - -config SYS_BOARD - default "balloon3" - -config SYS_CONFIG_NAME - default "balloon3" - -endif diff --git a/board/balloon3/MAINTAINERS b/board/balloon3/MAINTAINERS deleted file mode 100644 index df9a5bb..0000000 --- a/board/balloon3/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BALLOON3 BOARD -M: Marek Vasut <marek.vasut@gmail.com> -S: Maintained -F: board/balloon3/ -F: include/configs/balloon3.h -F: configs/balloon3_defconfig diff --git a/board/balloon3/Makefile b/board/balloon3/Makefile deleted file mode 100644 index d7fb5e0..0000000 --- a/board/balloon3/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Balloon3 Support -# -# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := balloon3.o diff --git a/board/balloon3/balloon3.c b/board/balloon3/balloon3.c deleted file mode 100644 index 458d90c..0000000 --- a/board/balloon3/balloon3.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * Balloon3 Support - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/pxa.h> -#include <serial.h> -#include <asm/io.h> -#include <spartan3.h> -#include <command.h> -#include <usb.h> - -DECLARE_GLOBAL_DATA_PTR; - -void balloon3_init_fpga(void); - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init(void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of balloon3 */ - gd->bd->bi_arch_number = MACH_TYPE_BALLOON3; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Init the FPGA */ - balloon3_init_fpga(); - - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; -} - -#ifdef CONFIG_CMD_USB -int board_usb_init(int index, enum usb_init_type init) -{ - writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE), - UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - - while (readl(UHCHR) & UHCHR_FSBIR) - ; - - writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR); - writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE); - - /* Clear any OTG Pin Hold */ - if (readl(PSSR) & PSSR_OTGPH) - writel(readl(PSSR) | PSSR_OTGPH, PSSR); - - writel(readl(UHCRHDA) & ~(0x200), UHCRHDA); - writel(readl(UHCRHDA) | 0x100, UHCRHDA); - - /* Set port power control mask bits, only 3 ports. */ - writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB); - - /* enable port 2 */ - writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS | - UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} - -void usb_board_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | 1, UHCCOMS); - udelay(10); - - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); - - return; -} -#endif - -#if defined(CONFIG_FPGA) -/* Toggle GPIO103 and GPIO104 -- PROGB and RDnWR */ -int fpga_pgm_fn(int nassert, int nflush, int cookie) -{ - if (nassert) - writel(0x80, GPCR3); - else - writel(0x80, GPSR3); - if (nflush) - writel(0x100, GPCR3); - else - writel(0x100, GPSR3); - return nassert; -} - -/* Check GPIO83 -- INITB */ -int fpga_init_fn(int cookie) -{ - return !(readl(GPLR2) & 0x80000); -} - -/* Check GPIO84 -- BUSY */ -int fpga_busy_fn(int cookie) -{ - return !(readl(GPLR2) & 0x100000); -} - -/* Check GPIO111 -- DONE */ -int fpga_done_fn(int cookie) -{ - return readl(GPLR3) & 0x8000; -} - -/* Configure GPIO104 as GPIO and deassert it */ -int fpga_pre_config_fn(int cookie) -{ - writel(readl(GAFR3_L) & ~0x30000, GAFR3_L); - writel(0x100, GPCR3); - return 0; -} - -/* Configure GPIO104 as nSKTSEL */ -int fpga_post_config_fn(int cookie) -{ - writel(readl(GAFR3_L) | 0x10000, GAFR3_L); - return 0; -} - -/* Toggle RDnWR */ -int fpga_wr_fn(int nassert_write, int flush, int cookie) -{ - udelay(1000); - - if (nassert_write) - writel(0x100, GPCR3); - else - writel(0x100, GPSR3); - - return nassert_write; -} - -/* Write program to the FPGA */ -int fpga_wdata_fn(uchar data, int flush, int cookie) -{ - writeb(data, 0x10f00000); - return 0; -} - -/* Toggle Clock pin -- NO-OP */ -int fpga_clk_fn(int assert_clk, int flush, int cookie) -{ - return assert_clk; -} - -/* Toggle ChipSelect pin -- NO-OP */ -int fpga_cs_fn(int assert_clk, int flush, int cookie) -{ - return assert_clk; -} - -xilinx_spartan3_slave_parallel_fns balloon3_fpga_fns = { - fpga_pre_config_fn, - fpga_pgm_fn, - fpga_init_fn, - NULL, /* err */ - fpga_done_fn, - fpga_clk_fn, - fpga_cs_fn, - fpga_wr_fn, - NULL, /* rdata */ - fpga_wdata_fn, - fpga_busy_fn, - NULL, /* abort */ - fpga_post_config_fn, -}; - -xilinx_desc fpga = XILINX_XC3S1000_DESC(slave_parallel, - (void *)&balloon3_fpga_fns, 0); - -/* Initialize the FPGA */ -void balloon3_init_fpga(void) -{ - fpga_init(); - fpga_add(fpga_xilinx, &fpga); -} -#else -void balloon3_init_fpga(void) {} -#endif /* CONFIG_FPGA */ diff --git a/configs/balloon3_defconfig b/configs/balloon3_defconfig deleted file mode 100644 index bf524ce..0000000 --- a/configs/balloon3_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_BALLOON3=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h deleted file mode 100644 index 124a766..0000000 --- a/include/configs/balloon3.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Balloon3 configuration file - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_BALLOON3 1 /* Balloon3 board */ - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOOTCOMMAND \ - "fpga load 0x0 0x50000 0x62638; " \ - "if usb reset && fatload usb 0 0xa4000000 uImage; then " \ - "bootm 0xa4000000; " \ - "fi; " \ - "bootm 0xd0000;" -#define CONFIG_BOOTARGS "console=tty0 console=ttyS2,115200" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_LZMA /* LZMA compression support */ - -/* - * Serial Console Configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_STUART 1 -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#undef CONFIG_CMD_ENV -#define CONFIG_CMD_USB -#define CONFIG_CMD_FPGA_LOADMK -#undef CONFIG_LCD - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " -#else -#endif -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 3 /* 3 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_2 0xb0000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x08000000 /* 128 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x18000000 /* 384 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa1000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR \ - (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048) - -/* - * NOR FLASH - */ -#ifdef CONFIG_CMD_FLASH -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_ENV_IS_IN_FLASH -#else -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#endif - -#define CONFIG_SYS_MONITOR_BASE 0x000000 -#define CONFIG_SYS_MONITOR_LEN 0x40000 - -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPSR0_VAL 0x307dc7fd -#define CONFIG_SYS_GPSR1_VAL 0x03cffa4e -#define CONFIG_SYS_GPSR2_VAL 0x7131c000 -#define CONFIG_SYS_GPSR3_VAL 0x01e1f3ff - -#define CONFIG_SYS_GPCR0_VAL 0x0 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPCR3_VAL 0x0 - -#define CONFIG_SYS_GPDR0_VAL 0xc0f98e02 -#define CONFIG_SYS_GPDR1_VAL 0xfcffa8b7 -#define CONFIG_SYS_GPDR2_VAL 0x22e3ffff -#define CONFIG_SYS_GPDR3_VAL 0x000201fe - -#define CONFIG_SYS_GAFR0_L_VAL 0x96c00000 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5e5459b -#define CONFIG_SYS_GAFR1_L_VAL 0x699b759a -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a5aa -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x01f9a6aa -#define CONFIG_SYS_GAFR3_L_VAL 0x54510003 -#define CONFIG_SYS_GAFR3_U_VAL 0x00001599 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0xffffffff -#define CONFIG_SYS_CCCR 0x00000290 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x7ff07ff8 -#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 -#define CONFIG_SYS_MSC2_VAL 0x74a42491 -#define CONFIG_SYS_MDCNFG_VAL 0x89d309d3 -#define CONFIG_SYS_MDREFR_VAL 0x001d8018 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000000 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 -#define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 -#define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f -#define CONFIG_SYS_MCIO1_VAL 0x0001430f - -/* - * LCD - */ -#ifdef CONFIG_LCD -#define CONFIG_BALLOON3LCD -#define CONFIG_VIDEO_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) -#endif - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "balloon3" -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#endif - -/* - * FPGA - */ -#ifdef CONFIG_CMD_FPGA -#define CONFIG_FPGA -#define CONFIG_FPGA_XILINX -#define CONFIG_FPGA_SPARTAN3 -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_SYS_FPGA_WAIT 1000 -#define CONFIG_MAX_FPGA_DEVICES 1 -#endif - -#endif /* __CONFIG_H */ |