diff options
author | Tom Rini <trini@ti.com> | 2013-12-02 13:38:28 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-12-02 13:38:28 (GMT) |
commit | 77fdd6d1eb69c1194148a9f4b4428d903af3619f (patch) | |
tree | 1ab1b0a75a4b77cf5be89e457eea772d2b5e6b30 | |
parent | d19ad726bcd5d9106f7ba9c750462fcc369f1020 (diff) | |
parent | f7f155e1e180e2e7743a036016ed917bba581d98 (diff) | |
download | u-boot-fsl-qoriq-77fdd6d1eb69c1194148a9f4b4428d903af3619f.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
209 files changed, 3595 insertions, 735 deletions
@@ -263,6 +263,7 @@ LIBS-y += drivers/power/ \ drivers/power/battery/ LIBS-y += drivers/spi/ LIBS-$(CONFIG_FMAN_ENET) += drivers/net/fm/ +LIBS-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ LIBS-y += drivers/serial/ LIBS-y += drivers/usb/eth/ LIBS-y += drivers/usb/gadget/ @@ -423,16 +423,50 @@ The following options need to be configured: CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT This value denotes start offset of DSP CCSR space. - CONFIG_SYS_FSL_DDR_EMU - Specify emulator support for DDR. Some DDR features such as - deskew training are not available. - - Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN Defines the endianess of the CPU. Implementation of those values is arch specific. + CONFIG_SYS_FSL_DDR + Freescale DDR driver in use. This type of DDR controller is + found in mpc83xx, mpc85xx, mpc86xx as well as some ARM core + SoCs. + + CONFIG_SYS_FSL_DDR_ADDR + Freescale DDR memory-mapped register base. + + CONFIG_SYS_FSL_DDR_EMU + Specify emulator support for DDR. Some DDR features such as + deskew training are not available. + + CONFIG_SYS_FSL_DDRC_GEN1 + Freescale DDR1 controller. + + CONFIG_SYS_FSL_DDRC_GEN2 + Freescale DDR2 controller. + + CONFIG_SYS_FSL_DDRC_GEN3 + Freescale DDR3 controller. + + CONFIG_SYS_FSL_DDRC_ARM_GEN3 + Freescale DDR3 controller for ARM-based SoCs. + + CONFIG_SYS_FSL_DDR1 + Board config to use DDR1. It can be enabled for SoCs with + Freescale DDR1 or DDR2 controllers, depending on the board + implemetation. + + CONFIG_SYS_FSL_DDR2 + Board config to use DDR2. It can be eanbeld for SoCs with + Freescale DDR2 or DDR3 controllers, depending on the board + implementation. + + CONFIG_SYS_FSL_DDR3 + Board config to use DDR3. It can be enabled for SoCs with + Freescale DDR3 controllers. + - Intel Monahans options: CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO @@ -3197,7 +3231,7 @@ FIT uImage format: CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT Set for the SPL on PPC mpc8xxx targets, support for - arch/powerpc/cpu/mpc8xxx/ddr/libddr.o in SPL binary. + drivers/ddr/fsl/libddr.o in SPL binary. CONFIG_SPL_COMMON_INIT_DDR Set for common ddr init with serial presence detect in diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile index d3f7001..c345dd6 100644 --- a/arch/powerpc/cpu/mpc83xx/Makefile +++ b/arch/powerpc/cpu/mpc83xx/Makefile @@ -38,11 +38,11 @@ obj-$(CONFIG_OF_LIBFDT) += fdt.o # Stub implementations of cache management functions for USB obj-y += cache.o -ifdef CONFIG_FSL_DDR2 -obj-$(CONFIG_MPC8349) += ../mpc85xx/ddr-gen2.o +ifdef CONFIG_SYS_FSL_DDR2 +obj-$(CONFIG_MPC8349) += $(SRCTREE)/drivers/ddr/fsl/mpc85xx_ddr_gen2.o else obj-y += spd_sdram.o endif -obj-$(CONFIG_FSL_DDR2) += law.o +obj-$(CONFIG_SYS_FSL_DDR2) += law.o endif # not minimal diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c index 120b37b..985a024 100644 --- a/arch/powerpc/cpu/mpc83xx/ecc.c +++ b/arch/powerpc/cpu/mpc83xx/ecc.c @@ -15,8 +15,8 @@ void ecc_print_status(void) { immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#ifdef CONFIG_FSL_DDR2 - ccsr_ddr_t *ddr = &immap->ddr; +#ifdef CONFIG_SYS_FSL_DDR2 + struct ccsr_ddr __iomem *ddr = &immap->ddr; #else ddr83xx_t *ddr = &immap->ddr; #endif @@ -99,8 +99,8 @@ void ecc_print_status(void) int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#ifdef CONFIG_FSL_DDR2 - ccsr_ddr_t *ddr = &immap->ddr; +#ifdef CONFIG_SYS_FSL_DDR2 + struct ccsr_ddr __iomem *ddr = &immap->ddr; #else ddr83xx_t *ddr = &immap->ddr; #endif diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index a34014f..ef7637a 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -29,51 +29,6 @@ obj-$(CONFIG_MP) += release.o obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o obj-$(CONFIG_CPM2) += commproc.o -# supports ddr1 -obj-$(CONFIG_MPC8540) += ddr-gen1.o -obj-$(CONFIG_MPC8560) += ddr-gen1.o -obj-$(CONFIG_MPC8541) += ddr-gen1.o -obj-$(CONFIG_MPC8555) += ddr-gen1.o - -# supports ddr1/2 -obj-$(CONFIG_MPC8548) += ddr-gen2.o -obj-$(CONFIG_MPC8568) += ddr-gen2.o -obj-$(CONFIG_MPC8544) += ddr-gen2.o - -# supports ddr1/2/3 -obj-$(CONFIG_PPC_C29X) += ddr-gen3.o -obj-$(CONFIG_MPC8572) += ddr-gen3.o -obj-$(CONFIG_MPC8536) += ddr-gen3.o -obj-$(CONFIG_MPC8569) += ddr-gen3.o -obj-$(CONFIG_P1010) += ddr-gen3.o -obj-$(CONFIG_P1011) += ddr-gen3.o -obj-$(CONFIG_P1012) += ddr-gen3.o -obj-$(CONFIG_P1013) += ddr-gen3.o -obj-$(CONFIG_P1014) += ddr-gen3.o -obj-$(CONFIG_P1020) += ddr-gen3.o -obj-$(CONFIG_P1021) += ddr-gen3.o -obj-$(CONFIG_P1022) += ddr-gen3.o -obj-$(CONFIG_P1023) += ddr-gen3.o -obj-$(CONFIG_P1024) += ddr-gen3.o -obj-$(CONFIG_P1025) += ddr-gen3.o -obj-$(CONFIG_P2010) += ddr-gen3.o -obj-$(CONFIG_P2020) += ddr-gen3.o -obj-$(CONFIG_PPC_P2041) += ddr-gen3.o -obj-$(CONFIG_PPC_P3041) += ddr-gen3.o -obj-$(CONFIG_PPC_P4080) += ddr-gen3.o -obj-$(CONFIG_PPC_P5020) += ddr-gen3.o -obj-$(CONFIG_PPC_P5040) += ddr-gen3.o -obj-$(CONFIG_PPC_T4240) += ddr-gen3.o -obj-$(CONFIG_PPC_T4160) += ddr-gen3.o -obj-$(CONFIG_PPC_B4420) += ddr-gen3.o -obj-$(CONFIG_PPC_B4860) += ddr-gen3.o -obj-$(CONFIG_BSC9131) += ddr-gen3.o -obj-$(CONFIG_BSC9132) += ddr-gen3.o -obj-$(CONFIG_PPC_T1040) += ddr-gen3.o -obj-$(CONFIG_PPC_T1042) += ddr-gen3.o -obj-$(CONFIG_PPC_T1020) += ddr-gen3.o -obj-$(CONFIG_PPC_T1022) += ddr-gen3.o - obj-$(CONFIG_CPM2) += ether_fcc.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_FSL_CORENET) += liodn.o @@ -95,6 +50,8 @@ obj-$(CONFIG_PPC_T1040) += t1040_ids.o obj-$(CONFIG_PPC_T1042) += t1040_ids.o obj-$(CONFIG_PPC_T1020) += t1040_ids.o obj-$(CONFIG_PPC_T1022) += t1040_ids.o +obj-$(CONFIG_PPC_T2080) += t2080_ids.o +obj-$(CONFIG_PPC_T2081) += t2080_ids.o obj-$(CONFIG_QE) += qe_io.o @@ -138,6 +95,8 @@ obj-$(CONFIG_PPC_T1040) += t1040_serdes.o obj-$(CONFIG_PPC_T1042) += t1040_serdes.o obj-$(CONFIG_PPC_T1020) += t1040_serdes.o obj-$(CONFIG_PPC_T1022) += t1040_serdes.o +obj-$(CONFIG_PPC_T2080) += t2080_serdes.o +obj-$(CONFIG_PPC_T2081) += t2080_serdes.o obj-y += cpu.o obj-y += cpu_init.o diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 1a0196c..3e99b07 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -17,12 +17,12 @@ #include <asm/cache.h> #include <asm/io.h> #include <asm/mmu.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/fsl_law.h> #include <asm/fsl_lbc.h> #include <post.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> DECLARE_GLOBAL_DATA_PTR; @@ -416,7 +416,7 @@ static void dump_spd_ddr_reg(void) int i, j, k, m; u8 *p_8; u32 *p_32; - ccsr_ddr_t *ddr[CONFIG_NUM_DDR_CONTROLLERS]; + struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS]; generic_spd_eeprom_t spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR]; @@ -453,21 +453,21 @@ static void dump_spd_ddr_reg(void) for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { switch (i) { case 0: - ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR; break; -#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: - ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; + ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: - ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; + ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: - ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR; + ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR; break; #endif default: @@ -482,7 +482,7 @@ static void dump_spd_ddr_reg(void) for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF); puts("\n"); - for (k = 0; k < sizeof(ccsr_ddr_t)/4; k++) { + for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) { m = 0; printf("%6d (0x%04x)", k * 4, k * 4); for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index 5f198eb..88c8e65 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -11,7 +11,7 @@ #include <asm/io.h> #include <asm/mmu.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include "mp.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index d08a8d2..1a58a19 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -122,7 +122,7 @@ void get_sys_info(sys_info_t *sys_info) sys_info->freq_processor[cpu] = freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } -#ifdef CONFIG_PPC_B4860 +#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080) #define FM1_CLK_SEL 0xe0000000 #define FM1_CLK_SHIFT 29 #else diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c index 199b33e..9e4c6c9 100644 --- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c @@ -7,7 +7,7 @@ #include <common.h> #include <asm/processor.h> #include <asm/global_data.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc85xx/t2080_ids.c b/arch/powerpc/cpu/mpc85xx/t2080_ids.c new file mode 100644 index 0000000..068e1f2 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t2080_ids.c @@ -0,0 +1,142 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 0), + SET_QP_INFO(10, 36, 1, 0), + SET_QP_INFO(11, 37, 1, 1), + SET_QP_INFO(12, 38, 1, 1), + SET_QP_INFO(13, 39, 1, 2), + SET_QP_INFO(14, 40, 1, 2), + SET_QP_INFO(15, 41, 1, 3), + SET_QP_INFO(16, 42, 1, 3), + SET_QP_INFO(17, 43, 1, 0), + SET_QP_INFO(18, 44, 1, 0), +}; +#endif + +#ifdef CONFIG_SYS_SRIO +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); +#endif + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_PME_LIODN(117), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + SET_USB_LIODN(2, "fsl-usb2-dr", 554), + + SET_SATA_LIODN(1, 555), + SET_SATA_LIODN(2, 556), + + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + SET_DMA_LIODN(3, 226), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + +#ifdef CONFIG_SYS_PMAN + SET_PMAN_LIODN(1, 513), + SET_PMAN_LIODN(2, 514), + SET_PMAN_LIODN(3, 515), +#endif + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { +#ifdef CONFIG_SYS_DPAA_DCE + [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694), +#endif + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#endif +#ifdef CONFIG_SYS_DPAA_PME + [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c new file mode 100644 index 0000000..f2fbdeb --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c @@ -0,0 +1,208 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Shengzhou Liu <Shengzhou.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static const struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x6E, {XFI_FM1_MAC9, XFI_FM1_MAC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xBC, {PCIE3, PCIE3, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE4, PCIE4, PCIE4} }, + {0xC8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xD6, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xDE, {PCIE3, PCIE3, PCIE3, PCIE3, + PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} }, + {0xE0, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, + PCIE1, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xF2, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} }, + {0xF8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} }, + {0xFA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE1, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, +#if defined(CONFIG_PPC_T2080) + {0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x95, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xA2, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x94, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x51, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x5F, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x65, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x6B, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM1_MAC1, XFI_FM1_MAC2, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x6D, {XFI_FM1_MAC9, XFI_FM1_MAC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x71, {XFI_FM1_MAC9, XFI_FM1_MAC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, + SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xA6, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, + PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x8E, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, + PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x8F, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, + PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x82, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x83, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xA4, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x96, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x8A, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x67, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM1_MAC1, XFI_FM1_MAC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0xAB, {PCIE3, PCIE3, PCIE3, PCIE3, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0xDA, {PCIE3, PCIE3, PCIE3, PCIE3, + PCIE3, PCIE3, PCIE3, PCIE3} }, + {0xD9, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xD3, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xCB, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xD8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x66, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM1_MAC1, XFI_FM1_MAC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + +#elif defined(CONFIG_PPC_T2081) + {0xAA, {PCIE3, PCIE3, PCIE3, PCIE3, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x70, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, +#endif + {} +}; + +#ifndef CONFIG_PPC_T2081 +static const struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, + {0x16, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} }, + {0x01, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, + {0x29, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} }, + {0x2D, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} }, + {0x15, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} }, + {0x18, {PCIE1, PCIE1, PCIE1, PCIE1, AURORA, AURORA, SATA1, SATA2} }, + {0x02, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, + {0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2} }, + {} +}; +#endif + +static const struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, +#ifndef CONFIG_PPC_T2081 + serdes2_cfg_tbl, +#endif +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + const struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + const struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc86xx/Makefile b/arch/powerpc/cpu/mpc86xx/Makefile index bcb786d..0f790b0 100644 --- a/arch/powerpc/cpu/mpc86xx/Makefile +++ b/arch/powerpc/cpu/mpc86xx/Makefile @@ -16,9 +16,6 @@ obj-$(CONFIG_MP) += release.o obj-y += cpu.o obj-y += cpu_init.o -# 8610 & 8641 are identical w/regards to DDR -obj-$(CONFIG_MPC8610) += ddr-8641.o -obj-$(CONFIG_MPC8641) += ddr-8641.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-y += interrupts.o obj-$(CONFIG_MP) += mp.o diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 1d083bf..f66ee2e 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -25,15 +25,8 @@ obj-y += cpu.o endif obj-$(CONFIG_OF_LIBFDT) += fdt.o -obj-$(CONFIG_FSL_IFC) += fsl_ifc.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_SYS_SRIO) += srio.o obj-$(CONFIG_FSL_LAW) += law.o endif - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/ -else -obj-y += ddr/ -endif diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index c67be4e..35795c4 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -75,6 +75,8 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(T1020, T1020, 0), CPU_TYPE_ENTRY(T1021, T1021, 0), CPU_TYPE_ENTRY(T1022, T1022, 0), + CPU_TYPE_ENTRY(T2080, T2080, 0), + CPU_TYPE_ENTRY(T2081, T2081, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), CPU_TYPE_ENTRY(BSC9132, 9132, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/Makefile b/arch/powerpc/cpu/mpc8xxx/ddr/Makefile deleted file mode 100644 index 8cbc06c..0000000 --- a/arch/powerpc/cpu/mpc8xxx/ddr/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# Copyright 2008-2011 Freescale Semiconductor, Inc. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# Version 2 as published by the Free Software Foundation. -# - -obj-$(CONFIG_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o - -obj-$(CONFIG_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o - -obj-$(CONFIG_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o -ifdef CONFIG_DDR_SPD -SPD := y -endif -ifdef CONFIG_SPD_EEPROM -SPD := y -endif -ifdef SPD -obj-$(CONFIG_FSL_DDR1) += ddr1_dimm_params.o -obj-$(CONFIG_FSL_DDR2) += ddr2_dimm_params.o -obj-$(CONFIG_FSL_DDR3) += ddr3_dimm_params.o -endif - -obj-$(CONFIG_FSL_DDR_INTERACTIVE) += interactive.o diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 3c17c99..423a6fb 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -9,10 +9,16 @@ #ifdef CONFIG_MPC85xx #include <asm/config_mpc85xx.h> +#define CONFIG_SYS_FSL_DDR #endif #ifdef CONFIG_MPC86xx #include <asm/config_mpc86xx.h> +#define CONFIG_SYS_FSL_DDR +#endif + +#ifdef CONFIG_MPC83xx +#define CONFIG_SYS_FSL_DDR #endif #ifndef HWCONFIG_BUFFER_SIZE diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index d4cd27d..99e16bd 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -40,17 +40,20 @@ #elif defined(CONFIG_MPC8540) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8541) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8544) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 +#define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 0 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 @@ -59,6 +62,7 @@ #elif defined(CONFIG_MPC8548) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 +#define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 0 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 @@ -77,17 +81,20 @@ #elif defined(CONFIG_MPC8555) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8560) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8568) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 +#define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define QE_MURAM_SIZE 0x10000UL #define MAX_QE_RISC 2 @@ -711,6 +718,50 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081) +#define CONFIG_E6500 +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 +#define CONFIG_SYS_FSL_QMAN_V3 +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 } +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_PCI_VER_3_X +#if defined(CONFIG_PPC_T2080) +#define CONFIG_SYS_NUM_FM1_DTSEC 8 +#define CONFIG_SYS_NUM_FM1_10GEC 4 +#define CONFIG_SYS_FSL_SRDS_2 +#define CONFIG_SYS_FSL_SRIO_LIODN +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#elif defined(CONFIG_PPC_T2081) +#define CONFIG_SYS_NUM_FM1_DTSEC 6 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#endif +#define CONFIG_SYS_FSL_NUM_USB_CTRLS 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_PME_PLAT_CLK_DIV 1 +#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV +#define CONFIG_SYS_FM1_CLK 0 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0" +#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_SFP_VER_3_0 +#define CONFIG_SYS_FSL_ISBC_VER 2 + #elif defined(CONFIG_PPC_C29X) #define CONFIG_MAX_CPUS 1 #define CONFIG_FSL_SDHC_V2_3 @@ -738,4 +789,10 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_SYS_FSL_THREADS_PER_CORE 1 #endif +#if !defined(CONFIG_SYS_FSL_DDRC_GEN1) && \ + !defined(CONFIG_SYS_FSL_DDRC_GEN2) && \ + !defined(CONFIG_SYS_FSL_DDRC_GEN3) +#define CONFIG_SYS_FSL_DDRC_GEN3 +#endif + #endif /* _ASM_MPC85xx_CONFIG_H_ */ diff --git a/arch/powerpc/include/asm/config_mpc86xx.h b/arch/powerpc/include/asm/config_mpc86xx.h index 694b110..4f9b225 100644 --- a/arch/powerpc/include/asm/config_mpc86xx.h +++ b/arch/powerpc/include/asm/config_mpc86xx.h @@ -7,6 +7,8 @@ #ifndef _ASM_MPC86xx_CONFIG_H_ #define _ASM_MPC86xx_CONFIG_H_ +#define CONFIG_SYS_FSL_DDR_86XX + /* SoC specific defines for Freescale MPC86xx processors */ #if defined(CONFIG_MPC8610) diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index cce892c..404ded4 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -62,6 +62,8 @@ enum srds_prtcl { QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */ QSGMII_FM2_A, QSGMII_FM2_B, + XFI_FM1_MAC1, + XFI_FM1_MAC2, XFI_FM1_MAC9, XFI_FM1_MAC10, XFI_FM2_MAC9, diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 289f7ca..2518402 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -14,6 +14,7 @@ #ifndef __IMMAP_83xx__ #define __IMMAP_83xx__ +#include <fsl_immap.h> #include <asm/types.h> #include <asm/fsl_i2c.h> #include <asm/mpc8xxx_spi.h> @@ -277,107 +278,10 @@ typedef struct qesba83xx { } qesba83xx_t; /* - * DDR Memory Controller Memory Map + * DDR Memory Controller Memory Map for DDR1 + * The structure of DDR2, or DDR3 is defined in fsl_immap.h */ -#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) -typedef struct ccsr_ddr { - u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ - u8 res1[4]; - u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ - u8 res2[4]; - u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ - u8 res3[4]; - u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ - u8 res4[100]; - u32 cs0_config; /* Chip Select Configuration */ - u32 cs1_config; /* Chip Select Configuration */ - u32 cs2_config; /* Chip Select Configuration */ - u32 cs3_config; /* Chip Select Configuration */ - u8 res4a[48]; - u32 cs0_config_2; /* Chip Select Configuration 2 */ - u32 cs1_config_2; /* Chip Select Configuration 2 */ - u32 cs2_config_2; /* Chip Select Configuration 2 */ - u32 cs3_config_2; /* Chip Select Configuration 2 */ - u8 res5[48]; - u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ - u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ - u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ - u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ - u32 sdram_cfg; /* SDRAM Control Configuration */ - u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ - u32 sdram_mode; /* SDRAM Mode Configuration */ - u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ - u32 sdram_md_cntl; /* SDRAM Mode Control */ - u32 sdram_interval; /* SDRAM Interval Configuration */ - u32 sdram_data_init; /* SDRAM Data initialization */ - u8 res6[4]; - u32 sdram_clk_cntl; /* SDRAM Clock Control */ - u8 res7[20]; - u32 init_addr; /* training init addr */ - u32 init_ext_addr; /* training init extended addr */ - u8 res8_1[16]; - u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ - u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ - u8 reg8_1a[8]; - u32 ddr_zq_cntl; /* ZQ calibration control*/ - u32 ddr_wrlvl_cntl; /* write leveling control*/ - u8 reg8_1aa[4]; - u32 ddr_sr_cntr; /* self refresh counter */ - u32 ddr_sdram_rcw_1; /* Control Words 1 */ - u32 ddr_sdram_rcw_2; /* Control Words 2 */ - u8 reg_1ab[8]; - u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ - u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ - u8 res8_1b[104]; - u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ - u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ - u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ - u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ - u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ - u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ - u8 res8_1ba[0x908]; - u32 ddr_dsr1; /* Debug Status 1 */ - u32 ddr_dsr2; /* Debug Status 2 */ - u32 ddr_cdr1; /* Control Driver 1 */ - u32 ddr_cdr2; /* Control Driver 2 */ - u8 res8_1c[200]; - u32 ip_rev1; /* IP Block Revision 1 */ - u32 ip_rev2; /* IP Block Revision 2 */ - u32 eor; /* Enhanced Optimization Register */ - u8 res8_2[252]; - u32 mtcr; /* Memory Test Control Register */ - u8 res8_3[28]; - u32 mtp1; /* Memory Test Pattern 1 */ - u32 mtp2; /* Memory Test Pattern 2 */ - u32 mtp3; /* Memory Test Pattern 3 */ - u32 mtp4; /* Memory Test Pattern 4 */ - u32 mtp5; /* Memory Test Pattern 5 */ - u32 mtp6; /* Memory Test Pattern 6 */ - u32 mtp7; /* Memory Test Pattern 7 */ - u32 mtp8; /* Memory Test Pattern 8 */ - u32 mtp9; /* Memory Test Pattern 9 */ - u32 mtp10; /* Memory Test Pattern 10 */ - u8 res8_4[184]; - u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ - u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ - u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ - u8 res9[20]; - u32 capture_data_hi; /* Data Path Read Capture High */ - u32 capture_data_lo; /* Data Path Read Capture Low */ - u32 capture_ecc; /* Data Path Read Capture ECC */ - u8 res10[20]; - u32 err_detect; /* Error Detect */ - u32 err_disable; /* Error Disable */ - u32 err_int_en; - u32 capture_attributes; /* Error Attrs Capture */ - u32 capture_address; /* Error Addr Capture */ - u32 capture_ext_address; /* Error Extended Addr Capture */ - u32 err_sbe; /* Single-Bit ECC Error Management */ - u8 res11[164]; - u32 debug[32]; /* debug_1 to debug_32 */ - u8 res12[128]; -} ccsr_ddr_t; -#else +#if !defined(CONFIG_SYS_FSL_DDR2) && !defined(CONFIG_SYS_FSL_DDR3) typedef struct ddr_cs_bnds { u32 csbnds; u8 res0[4]; @@ -739,8 +643,8 @@ typedef struct immap { u8 dll_ddr[0x100]; u8 dll_lbc[0x100]; u8 res1[0xE00]; -#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) - ccsr_ddr_t ddr; /* DDR Memory Controller Memory */ +#if defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3) + struct ccsr_ddr ddr; /* DDR Memory Controller Memory */ #else ddr83xx_t ddr; /* DDR Memory Controller Memory */ #endif @@ -1029,7 +933,7 @@ typedef struct immap { #endif #define CONFIG_SYS_MPC8xxx_DDR_OFFSET (0x2000) -#define CONFIG_SYS_MPC8xxx_DDR_ADDR \ +#define CONFIG_SYS_FSL_DDR_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) #define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000) #define CONFIG_SYS_MPC83xx_DMA_ADDR \ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 6312618..672e8c6 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -15,9 +15,10 @@ #include <asm/types.h> #include <asm/fsl_dma.h> #include <asm/fsl_i2c.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/fsl_lbc.h> #include <asm/fsl_fman.h> +#include <fsl_immap.h> typedef struct ccsr_local { u32 ccsrbarh; /* CCSR Base Addr High */ @@ -112,105 +113,6 @@ typedef struct ccsr_local_ecm { u8 res24[492]; } ccsr_local_ecm_t; -/* DDR memory controller registers */ -typedef struct ccsr_ddr { - u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ - u8 res1[4]; - u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ - u8 res2[4]; - u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ - u8 res3[4]; - u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ - u8 res4[100]; - u32 cs0_config; /* Chip Select Configuration */ - u32 cs1_config; /* Chip Select Configuration */ - u32 cs2_config; /* Chip Select Configuration */ - u32 cs3_config; /* Chip Select Configuration */ - u8 res4a[48]; - u32 cs0_config_2; /* Chip Select Configuration 2 */ - u32 cs1_config_2; /* Chip Select Configuration 2 */ - u32 cs2_config_2; /* Chip Select Configuration 2 */ - u32 cs3_config_2; /* Chip Select Configuration 2 */ - u8 res5[48]; - u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ - u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ - u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ - u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ - u32 sdram_cfg; /* SDRAM Control Configuration */ - u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ - u32 sdram_mode; /* SDRAM Mode Configuration */ - u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ - u32 sdram_md_cntl; /* SDRAM Mode Control */ - u32 sdram_interval; /* SDRAM Interval Configuration */ - u32 sdram_data_init; /* SDRAM Data initialization */ - u8 res6[4]; - u32 sdram_clk_cntl; /* SDRAM Clock Control */ - u8 res7[20]; - u32 init_addr; /* training init addr */ - u32 init_ext_addr; /* training init extended addr */ - u8 res8_1[16]; - u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ - u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ - u8 reg8_1a[8]; - u32 ddr_zq_cntl; /* ZQ calibration control*/ - u32 ddr_wrlvl_cntl; /* write leveling control*/ - u8 reg8_1aa[4]; - u32 ddr_sr_cntr; /* self refresh counter */ - u32 ddr_sdram_rcw_1; /* Control Words 1 */ - u32 ddr_sdram_rcw_2; /* Control Words 2 */ - u8 reg_1ab[8]; - u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ - u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ - u8 res8_1b[104]; - u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ - u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ - u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ - u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ - u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ - u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ - u8 res8_1ba[0x908]; - u32 ddr_dsr1; /* Debug Status 1 */ - u32 ddr_dsr2; /* Debug Status 2 */ - u32 ddr_cdr1; /* Control Driver 1 */ - u32 ddr_cdr2; /* Control Driver 2 */ - u8 res8_1c[200]; - u32 ip_rev1; /* IP Block Revision 1 */ - u32 ip_rev2; /* IP Block Revision 2 */ - u32 eor; /* Enhanced Optimization Register */ - u8 res8_2[252]; - u32 mtcr; /* Memory Test Control Register */ - u8 res8_3[28]; - u32 mtp1; /* Memory Test Pattern 1 */ - u32 mtp2; /* Memory Test Pattern 2 */ - u32 mtp3; /* Memory Test Pattern 3 */ - u32 mtp4; /* Memory Test Pattern 4 */ - u32 mtp5; /* Memory Test Pattern 5 */ - u32 mtp6; /* Memory Test Pattern 6 */ - u32 mtp7; /* Memory Test Pattern 7 */ - u32 mtp8; /* Memory Test Pattern 8 */ - u32 mtp9; /* Memory Test Pattern 9 */ - u32 mtp10; /* Memory Test Pattern 10 */ - u8 res8_4[184]; - u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ - u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ - u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ - u8 res9[20]; - u32 capture_data_hi; /* Data Path Read Capture High */ - u32 capture_data_lo; /* Data Path Read Capture Low */ - u32 capture_ecc; /* Data Path Read Capture ECC */ - u8 res10[20]; - u32 err_detect; /* Error Detect */ - u32 err_disable; /* Error Disable */ - u32 err_int_en; - u32 capture_attributes; /* Error Attrs Capture */ - u32 capture_address; /* Error Addr Capture */ - u32 capture_ext_address; /* Error Extended Addr Capture */ - u32 err_sbe; /* Single-Bit ECC Error Management */ - u8 res11[164]; - u32 debug[32]; /* debug_1 to debug_32 */ - u8 res12[128]; -} ccsr_ddr_t; - #define DDR_EOR_RD_BDW_OPT_DIS 0x80000000 /* Read BDW Opt. disable */ #define DDR_EOR_ADDR_HASH_EN 0x40000000 /* Address hash enabled */ @@ -1719,6 +1621,8 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000 #define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000 #define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000 +#define FSL_CORENET_DEVDISR2_10GEC1_3 0x80000000 +#define FSL_CORENET_DEVDISR2_10GEC1_4 0x40000000 #define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000 #define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000 #define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000 @@ -1855,6 +1759,12 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17 +#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16 +#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000 #endif #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000 @@ -1918,6 +1828,15 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000 #define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 #endif +#if defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081) +#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ +#define FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_GPIO 0x40000000 +#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */ +#define FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_DTSEC10_RGMII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_GPIO 0x10000000 +#endif u8 res18[192]; u32 scratchrw[4]; /* Scratch Read/Write */ u8 res19[240]; @@ -2914,6 +2833,7 @@ struct ccsr_pman { #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000 +#define CONFIG_SYS_MPC85xx_DMA3_OFFSET 0x102000 #define CONFIG_SYS_MPC85xx_DMA_OFFSET CONFIG_SYS_MPC85xx_DMA1_OFFSET #define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x110000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000 @@ -3048,11 +2968,11 @@ struct ccsr_pman { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET) #define CONFIG_SYS_MPC85xx_ECM_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET) -#define CONFIG_SYS_MPC8xxx_DDR_ADDR \ +#define CONFIG_SYS_FSL_DDR_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) -#define CONFIG_SYS_MPC8xxx_DDR2_ADDR \ +#define CONFIG_SYS_FSL_DDR2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET) -#define CONFIG_SYS_MPC8xxx_DDR3_ADDR \ +#define CONFIG_SYS_FSL_DDR3_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR3_OFFSET) #define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index 2a704fe..177918b 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -10,6 +10,7 @@ #ifndef __IMMAP_86xx__ #define __IMMAP_86xx__ +#include <fsl_immap.h> #include <asm/types.h> #include <asm/fsl_dma.h> #include <asm/fsl_lbc.h> @@ -89,75 +90,6 @@ typedef struct ccsr_local_mcm { char res31[488]; } ccsr_local_mcm_t; -/* DDR memory controller registers(0x2000-0x3000) and (0x6000-0x7000) */ - -typedef struct ccsr_ddr { - uint cs0_bnds; /* 0x2000 - DDR Chip Select 0 Memory Bounds */ - char res1[4]; - uint cs1_bnds; /* 0x2008 - DDR Chip Select 1 Memory Bounds */ - char res2[4]; - uint cs2_bnds; /* 0x2010 - DDR Chip Select 2 Memory Bounds */ - char res3[4]; - uint cs3_bnds; /* 0x2018 - DDR Chip Select 3 Memory Bounds */ - char res4[4]; - uint cs4_bnds; /* 0x2020 - DDR Chip Select 4 Memory Bounds */ - char res5[4]; - uint cs5_bnds; /* 0x2028 - DDR Chip Select 5 Memory Bounds */ - char res6[84]; - uint cs0_config; /* 0x2080 - DDR Chip Select Configuration */ - uint cs1_config; /* 0x2084 - DDR Chip Select Configuration */ - uint cs2_config; /* 0x2088 - DDR Chip Select Configuration */ - uint cs3_config; /* 0x208c - DDR Chip Select Configuration */ - uint cs4_config; /* 0x2090 - DDR Chip Select Configuration */ - uint cs5_config; /* 0x2094 - DDR Chip Select Configuration */ - char res7[104]; - uint timing_cfg_3; /* 0x2100 - DDR SDRAM Timing Configuration Register 3 */ - uint timing_cfg_0; /* 0x2104 - DDR SDRAM Timing Configuration Register 0 */ - uint timing_cfg_1; /* 0x2108 - DDR SDRAM Timing Configuration Register 1 */ - uint timing_cfg_2; /* 0x210c - DDR SDRAM Timing Configuration Register 2 */ - uint sdram_cfg; /* 0x2110 - DDR SDRAM Control Configuration 1 */ - uint sdram_cfg_2; /* 0x2114 - DDR SDRAM Control Configuration 2 */ - uint sdram_mode; /* 0x2118 - DDR SDRAM Mode Configuration 1 */ - uint sdram_mode_2; /* 0x211c - DDR SDRAM Mode Configuration 2 */ - uint sdram_mode_cntl; /* 0x2120 - DDR SDRAM Mode Control */ - uint sdram_interval; /* 0x2124 - DDR SDRAM Interval Configuration */ - uint sdram_data_init; /* 0x2128 - DDR SDRAM Data Initialization */ - char res8[4]; - uint sdram_clk_cntl; /* 0x2130 - DDR SDRAM Clock Control */ - char res9[12]; - uint sdram_ocd_cntl; /* 0x2140 - DDR SDRAM OCD Control */ - uint sdram_ocd_status; /* 0x2144 - DDR SDRAM OCD Status */ - uint init_addr; /* 0x2148 - DDR training initialzation address */ - uint init_ext_addr; /* 0x214C - DDR training initialzation extended address */ - char res10[2728]; - uint ip_rev1; /* 0x2BF8 - DDR IP Block Revision 1 */ - uint ip_rev2; /* 0x2BFC - DDR IP Block Revision 2 */ - char res11[512]; - uint data_err_inject_hi; /* 0x2e00 - DDR Memory Data Path Error Injection Mask High */ - uint data_err_inject_lo; /* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */ - uint ecc_err_inject; /* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */ - char res12[20]; - uint capture_data_hi; /* 0x2e20 - DDR Memory Data Path Read Capture High */ - uint capture_data_lo; /* 0x2e24 - DDR Memory Data Path Read Capture Low */ - uint capture_ecc; /* 0x2e28 - DDR Memory Data Path Read Capture ECC */ - char res13[20]; - uint err_detect; /* 0x2e40 - DDR Memory Error Detect */ - uint err_disable; /* 0x2e44 - DDR Memory Error Disable */ - uint err_int_en; /* 0x2e48 - DDR Memory Error Interrupt Enable */ - uint capture_attributes; /* 0x2e4c - DDR Memory Error Attributes Capture */ - uint capture_address; /* 0x2e50 - DDR Memory Error Address Capture */ - uint capture_ext_address; /* 0x2e54 - DDR Memory Error Extended Address Capture */ - uint err_sbe; /* 0x2e58 - DDR Memory Single-Bit ECC Error Management */ - char res14[164]; - uint debug_1; /* 0x2f00 */ - uint debug_2; - uint debug_3; - uint debug_4; - uint debug_5; - char res15[236]; -} ccsr_ddr_t; - - /* Daul I2C Registers(0x3000-0x4000) */ typedef struct ccsr_i2c { struct fsl_i2c i2c[2]; @@ -1225,11 +1157,11 @@ typedef struct ccsr_wdt { typedef struct immap { ccsr_local_mcm_t im_local_mcm; - ccsr_ddr_t im_ddr1; + struct ccsr_ddr im_ddr1; ccsr_i2c_t im_i2c; ccsr_duart_t im_duart; fsl_lbc_t im_lbc; - ccsr_ddr_t im_ddr2; + struct ccsr_ddr im_ddr2; char res1[4096]; ccsr_pex_t im_pex1; ccsr_pex_t im_pex2; @@ -1253,9 +1185,9 @@ typedef struct immap { extern immap_t *immr; #define CONFIG_SYS_MPC8xxx_DDR_OFFSET 0x2000 -#define CONFIG_SYS_MPC8xxx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) +#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) #define CONFIG_SYS_MPC8xxx_DDR2_OFFSET 0x6000 -#define CONFIG_SYS_MPC8xxx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET) +#define CONFIG_SYS_FSL_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET) #define CONFIG_SYS_MPC86xx_DMA_OFFSET 0x21000 #define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET) #define CONFIG_SYS_MPC86xx_PIC_OFFSET 0x40000 diff --git a/arch/powerpc/include/asm/mpc85xx_gpio.h b/arch/powerpc/include/asm/mpc85xx_gpio.h index 3d11884..87bb4a0 100644 --- a/arch/powerpc/include/asm/mpc85xx_gpio.h +++ b/arch/powerpc/include/asm/mpc85xx_gpio.h @@ -20,7 +20,7 @@ static inline void mpc85xx_gpio_set(unsigned int mask, unsigned int dir, unsigned int val) { - ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xc00); + ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); /* First mask off the unwanted parts of "dir" and "val" */ dir &= mask; @@ -56,7 +56,7 @@ static inline void mpc85xx_gpio_set_high(unsigned int gpios) static inline unsigned int mpc85xx_gpio_get(unsigned int mask) { - ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xc00); + ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); /* Read the requested values */ return in_be32(&gpio->gpdat) & mask; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 81f9d38..831804c 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1127,6 +1127,8 @@ #define SVR_T1020 0x852100 #define SVR_T1021 0x852101 #define SVR_T1022 0x852102 +#define SVR_T2080 0x853000 +#define SVR_T2081 0x853100 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/board/exmeritus/hww1u1a/ddr.c b/board/exmeritus/hww1u1a/ddr.c index 23a71d5..e1f6865 100644 --- a/board/exmeritus/hww1u1a/ddr.c +++ b/board/exmeritus/hww1u1a/ddr.c @@ -9,8 +9,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c index 7c11e38..97b84b3 100644 --- a/board/exmeritus/hww1u1a/hww1u1a.c +++ b/board/exmeritus/hww1u1a/hww1u1a.c @@ -13,7 +13,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <miiphy.h> #include <libfdt.h> @@ -37,6 +37,7 @@ int checkboard(void) unsigned int gpio_low = 0; unsigned int gpio_in = 0; unsigned int i; + struct ccsr_ddr __iomem *ddr; puts("Board: HWW-1U-1A "); @@ -89,7 +90,7 @@ int checkboard(void) * and delay a while before we continue. */ if (mpc85xx_gpio_get(GPIO_RESETS)) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ddr = (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; puts("Debugger detected... extra device reset enabled!\n"); diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c index 2d14923..187c3b3 100644 --- a/board/freescale/b4860qds/ddr.c +++ b/board/freescale/b4860qds/ddr.c @@ -9,11 +9,11 @@ #include <common.h> #include <i2c.h> #include <hwconfig.h> +#include <fsl_ddr.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> -#include <../arch/powerpc/cpu/mpc8xxx/ddr/ddr.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/bsc9131rdb/ddr.c b/board/freescale/bsc9131rdb/ddr.c index a9e92f2..339c576 100644 --- a/board/freescale/bsc9131rdb/ddr.c +++ b/board/freescale/bsc9131rdb/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/bsc9131rdb/spl_minimal.c b/board/freescale/bsc9131rdb/spl_minimal.c index dd5ea95..bd8560b 100644 --- a/board/freescale/bsc9131rdb/spl_minimal.c +++ b/board/freescale/bsc9131rdb/spl_minimal.c @@ -10,7 +10,7 @@ #include <nand.h> #include <linux/compiler.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; @@ -20,7 +20,8 @@ DECLARE_GLOBAL_DATA_PTR; */ static void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index a895e4e..9377280 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -17,10 +17,10 @@ #include <tsec.h> #include <mmc.h> #include <netdev.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <hwconfig.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #ifdef CONFIG_PCI #include <pci.h> @@ -133,16 +133,16 @@ void dsp_ddr_configure(void) *copy the ddr controller settings from PowerPC side DDR controller *to the DSP DDR controller as connected DDR memories are similar. */ - ccsr_ddr_t __iomem *pa_ddr = - (ccsr_ddr_t __iomem *)CONFIG_SYS_MPC8xxx_DDR_ADDR; - ccsr_ddr_t temp_ddr; - ccsr_ddr_t __iomem *dsp_ddr = - (ccsr_ddr_t __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR; + struct ccsr_ddr __iomem *pa_ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; + struct ccsr_ddr temp_ddr; + struct ccsr_ddr __iomem *dsp_ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR; - memcpy(&temp_ddr, pa_ddr, sizeof(ccsr_ddr_t)); + memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr)); temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS; temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN; - memcpy(dsp_ddr, &temp_ddr, sizeof(ccsr_ddr_t)); + memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr)); dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN; } diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c index b3130be..43f163a 100644 --- a/board/freescale/bsc9132qds/ddr.c +++ b/board/freescale/bsc9132qds/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/bsc9132qds/spl_minimal.c b/board/freescale/bsc9132qds/spl_minimal.c index 2bf0a0c..8f71431 100644 --- a/board/freescale/bsc9132qds/spl_minimal.c +++ b/board/freescale/bsc9132qds/spl_minimal.c @@ -10,14 +10,15 @@ #include <nand.h> #include <linux/compiler.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; static void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; #if CONFIG_DDR_CLK_FREQ == 100000000 __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c index 48c4b30..f964d61 100644 --- a/board/freescale/c29xpcie/c29xpcie.c +++ b/board/freescale/c29xpcie/c29xpcie.c @@ -18,7 +18,7 @@ #include <mmc.h> #include <netdev.h> #include <pci.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/fsl_pci.h> #include "cpld.h" diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c index 57a9b61..968655c 100644 --- a/board/freescale/c29xpcie/ddr.c +++ b/board/freescale/c29xpcie/ddr.c @@ -6,8 +6,8 @@ #include <common.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include "cpld.h" diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 18e2ff6..e7e893a 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -10,8 +10,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c index e5beb55..5cbec7f 100644 --- a/board/freescale/corenet_ds/eth_p4080.c +++ b/board/freescale/corenet_ds/eth_p4080.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> diff --git a/board/freescale/corenet_ds/p3041ds_ddr.c b/board/freescale/corenet_ds/p3041ds_ddr.c index 5a8ed94..4dead9c 100644 --- a/board/freescale/corenet_ds/p3041ds_ddr.c +++ b/board/freescale/corenet_ds/p3041ds_ddr.c @@ -7,7 +7,7 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> fixed_ddr_parm_t fixed_ddr_parm_0[] = { {0, 0, NULL} diff --git a/board/freescale/corenet_ds/p4080ds_ddr.c b/board/freescale/corenet_ds/p4080ds_ddr.c index 844e1d7..d572a5f 100644 --- a/board/freescale/corenet_ds/p4080ds_ddr.c +++ b/board/freescale/corenet_ds/p4080ds_ddr.c @@ -7,7 +7,7 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000 #define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104 diff --git a/board/freescale/corenet_ds/p5020ds_ddr.c b/board/freescale/corenet_ds/p5020ds_ddr.c index e65de36..9aaf6db 100644 --- a/board/freescale/corenet_ds/p5020ds_ddr.c +++ b/board/freescale/corenet_ds/p5020ds_ddr.c @@ -7,7 +7,7 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> fixed_ddr_parm_t fixed_ddr_parm_0[] = { {0, 0, NULL} diff --git a/board/freescale/corenet_ds/p5040ds_ddr.c b/board/freescale/corenet_ds/p5040ds_ddr.c index e65de36..9aaf6db 100644 --- a/board/freescale/corenet_ds/p5040ds_ddr.c +++ b/board/freescale/corenet_ds/p5040ds_ddr.c @@ -7,7 +7,7 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> fixed_ddr_parm_t fixed_ddr_parm_0[] = { {0, 0, NULL} diff --git a/board/freescale/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile index 23880f5..5c315f9 100644 --- a/board/freescale/mpc8349emds/Makefile +++ b/board/freescale/mpc8349emds/Makefile @@ -7,4 +7,4 @@ obj-y += mpc8349emds.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/freescale/mpc8349emds/ddr.c b/board/freescale/mpc8349emds/ddr.c index 3d257d0..aae003d 100644 --- a/board/freescale/mpc8349emds/ddr.c +++ b/board/freescale/mpc8349emds/ddr.c @@ -6,8 +6,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index ec48487..d909220 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -12,8 +12,8 @@ #include <i2c.h> #include <spi.h> #include <miiphy.h> -#ifdef CONFIG_FSL_DDR2 -#include <asm/fsl_ddr_sdram.h> +#ifdef CONFIG_SYS_FSL_DDR2 +#include <fsl_ddr_sdram.h> #else #include <spd_sdram.h> #endif @@ -57,7 +57,7 @@ phys_size_t initdram (int board_type) /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) -#ifndef CONFIG_FSL_DDR2 +#ifndef CONFIG_SYS_FSL_DDR2 msize = spd_sdram() * 1024 * 1024; #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) ddr_enable_ecc(msize); diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c index d10370c..ebe3ba4 100644 --- a/board/freescale/mpc8536ds/ddr.c +++ b/board/freescale/mpc8536ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 5daab69..467f4f2 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_serdes.h> #include <spd.h> @@ -90,7 +90,7 @@ int checkboard (void) phys_size_t fixed_sdram (void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr= &immap->im_ddr; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr; uint d_init; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c index 9e79815..41d4cfe 100644 --- a/board/freescale/mpc8540ads/ddr.c +++ b/board/freescale/mpc8540ads/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 175eefc..93288c7 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -14,7 +14,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <libfdt.h> #include <fdt_support.h> @@ -168,7 +168,8 @@ void lbc_sdram_init(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/mpc8541cds/ddr.c b/board/freescale/mpc8541cds/ddr.c index 78d73b0..d2ac6c4 100644 --- a/board/freescale/mpc8541cds/ddr.c +++ b/board/freescale/mpc8541cds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 8115e5c..7b264dd 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -11,7 +11,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <spd_sdram.h> #include <libfdt.h> diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c index 6cf9bc1..aa30cab 100644 --- a/board/freescale/mpc8544ds/ddr.c +++ b/board/freescale/mpc8544ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index dfd8fa6..1b33db6 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -11,7 +11,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <miiphy.h> diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c index 996ffe2..b31ea34 100644 --- a/board/freescale/mpc8548cds/ddr.c +++ b/board/freescale/mpc8548cds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index 51e4bb5..ca9b43c 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -12,7 +12,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <miiphy.h> #include <libfdt.h> diff --git a/board/freescale/mpc8555cds/ddr.c b/board/freescale/mpc8555cds/ddr.c index 78d73b0..d2ac6c4 100644 --- a/board/freescale/mpc8555cds/ddr.c +++ b/board/freescale/mpc8555cds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index e2093d1..de5f566 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -9,7 +9,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <spd_sdram.h> #include <libfdt.h> diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c index 9e79815..41d4cfe 100644 --- a/board/freescale/mpc8560ads/ddr.c +++ b/board/freescale/mpc8560ads/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 90a2522..7104e33 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -14,7 +14,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <spd_sdram.h> #include <miiphy.h> @@ -373,7 +373,7 @@ void lbc_sdram_init(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_FSL_DDR_ADDR); ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/mpc8568mds/ddr.c b/board/freescale/mpc8568mds/ddr.c index b1f4f1f..6db92ef 100644 --- a/board/freescale/mpc8568mds/ddr.c +++ b/board/freescale/mpc8568mds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index ae80697..a8fdcb5 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -12,7 +12,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <spd_sdram.h> #include <i2c.h> diff --git a/board/freescale/mpc8569mds/ddr.c b/board/freescale/mpc8569mds/ddr.c index 68f686b..ef404b1 100644 --- a/board/freescale/mpc8569mds/ddr.c +++ b/board/freescale/mpc8569mds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index c928a96..cb55e1c 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -14,7 +14,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <spd_sdram.h> @@ -231,7 +231,8 @@ int checkboard (void) #if !defined(CONFIG_SPD_EEPROM) phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; uint d_init; out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c index 52e4f42..2bfc1a1 100644 --- a/board/freescale/mpc8572ds/ddr.c +++ b/board/freescale/mpc8572ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 657df6a..5686322 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_serdes.h> #include <miiphy.h> @@ -62,7 +62,7 @@ int checkboard (void) phys_size_t fixed_sdram (void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr= &immap->im_ddr; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr; uint d_init; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; diff --git a/board/freescale/mpc8610hpcd/Makefile b/board/freescale/mpc8610hpcd/Makefile index 933ea17..2613004 100644 --- a/board/freescale/mpc8610hpcd/Makefile +++ b/board/freescale/mpc8610hpcd/Makefile @@ -4,6 +4,6 @@ # obj-y += mpc8610hpcd.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o obj-y += law.o obj-$(CONFIG_FSL_DIU_FB) += mpc8610hpcd_diu.o diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c index 6cf9bc1..aa30cab 100644 --- a/board/freescale/mpc8610hpcd/ddr.c +++ b/board/freescale/mpc8610hpcd/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index ffdcf24..d8740dd 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -10,7 +10,7 @@ #include <asm/processor.h> #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <i2c.h> #include <asm/io.h> @@ -143,7 +143,7 @@ phys_size_t fixed_sdram(void) { #if !defined(CONFIG_SYS_RAMBOOT) volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr1; uint d_init; ddr->cs0_bnds = 0x0000001f; diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile index 8d53af8..86c70bc 100644 --- a/board/freescale/mpc8641hpcn/Makefile +++ b/board/freescale/mpc8641hpcn/Makefile @@ -7,4 +7,4 @@ obj-y += mpc8641hpcn.o obj-y += law.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 651652a..7cd0395 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 46a543e..a58b5f9 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -9,7 +9,7 @@ #include <asm/processor.h> #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <libfdt.h> @@ -64,7 +64,7 @@ fixed_sdram(void) { #if !defined(CONFIG_SYS_RAMBOOT) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr1; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c index ab1b41d..b0d95ea 100644 --- a/board/freescale/p1010rdb/ddr.c +++ b/board/freescale/p1010rdb/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index e940d22..62caf67 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -19,7 +19,7 @@ #include <netdev.h> #include <pci.h> #include <asm/fsl_serdes.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/fsl_pci.h> #include <hwconfig.h> #include <i2c.h> diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c index d0e712e..39a5a0f 100644 --- a/board/freescale/p1010rdb/spl_minimal.c +++ b/board/freescale/p1010rdb/spl_minimal.c @@ -10,7 +10,7 @@ #include <nand.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_law.h> #include <asm/global_data.h> @@ -19,7 +19,8 @@ DECLARE_GLOBAL_DATA_PTR; void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; u32 ddr_ratio; unsigned long ddr_freq_mhz; diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c index 94d2c2b..09212bc 100644 --- a/board/freescale/p1022ds/ddr.c +++ b/board/freescale/p1022ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index 3d1951c..ba789a4 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -14,7 +14,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <libfdt.h> diff --git a/board/freescale/p1022ds/spl_minimal.c b/board/freescale/p1022ds/spl_minimal.c index 8b34396..6c7e1ac 100644 --- a/board/freescale/p1022ds/spl_minimal.c +++ b/board/freescale/p1022ds/spl_minimal.c @@ -9,7 +9,7 @@ #include <asm/io.h> #include <nand.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> const static u32 sysclk_tbl[] = { diff --git a/board/freescale/p1023rdb/ddr.c b/board/freescale/p1023rdb/ddr.c index 9fb61fd..d587df5 100644 --- a/board/freescale/p1023rdb/ddr.c +++ b/board/freescale/p1023rdb/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1023rdb/p1023rdb.c b/board/freescale/p1023rdb/p1023rdb.c index b52b092..d2d4f83 100644 --- a/board/freescale/p1023rdb/p1023rdb.c +++ b/board/freescale/p1023rdb/p1023rdb.c @@ -16,7 +16,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_portals.h> #include <libfdt.h> #include <fdt_support.h> diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index 7c54b65..d8c8745 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -16,7 +16,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_portals.h> #include <libfdt.h> #include <fdt_support.h> @@ -58,7 +58,8 @@ int checkboard(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 5bee22e..17d3bea 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -8,7 +8,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index 81cc093..946d503 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -10,8 +10,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 50553da..966abb2 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -14,7 +14,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_law.h> #include <asm/fsl_lbc.h> diff --git a/board/freescale/p1_p2_rdb_pc/spl_minimal.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c index adfa7b1..92437bc 100644 --- a/board/freescale/p1_p2_rdb_pc/spl_minimal.c +++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c @@ -10,7 +10,7 @@ #include <nand.h> #include <linux/compiler.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/p1_twr/ddr.c b/board/freescale/p1_twr/ddr.c index 67f69d7..a2ce75a 100644 --- a/board/freescale/p1_twr/ddr.c +++ b/board/freescale/p1_twr/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c index ea8db6f..0e0d058 100644 --- a/board/freescale/p1_twr/p1_twr.c +++ b/board/freescale/p1_twr/p1_twr.c @@ -14,7 +14,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_law.h> #include <asm/fsl_lbc.h> diff --git a/board/freescale/p2020come/ddr.c b/board/freescale/p2020come/ddr.c index da80477..b642e12 100644 --- a/board/freescale/p2020come/ddr.c +++ b/board/freescale/p2020come/ddr.c @@ -5,8 +5,8 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c index b12141f..debe70b 100644 --- a/board/freescale/p2020ds/ddr.c +++ b/board/freescale/p2020ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; @@ -37,7 +37,7 @@ static const struct board_specific_parameters dimm0[] = { * num| hi| clk| cpo|wrdata|2T * ranks| mhz|adjst| | delay| */ -#ifdef CONFIG_FSL_DDR2 +#ifdef CONFIG_SYS_FSL_DDR2 {2, 549, 4, 0x1f, 2, 0}, {2, 680, 4, 0x1f, 3, 0}, {2, 850, 4, 0x1f, 4, 0}, diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 58a4223..a0cf927 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_serdes.h> #include <miiphy.h> @@ -68,7 +68,8 @@ int checkboard(void) phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; uint d_init; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/p2041rdb/ddr.c b/board/freescale/p2041rdb/ddr.c index cc1bfae..b8bbcdf 100644 --- a/board/freescale/p2041rdb/ddr.c +++ b/board/freescale/p2041rdb/ddr.c @@ -10,8 +10,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> struct board_specific_parameters { diff --git a/board/freescale/t1040qds/ddr.c b/board/freescale/t1040qds/ddr.c index 4fd17da..da89a36 100644 --- a/board/freescale/t1040qds/ddr.c +++ b/board/freescale/t1040qds/ddr.c @@ -8,8 +8,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> #include "ddr.h" diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c index 8f58dd6..9009afa 100644 --- a/board/freescale/t104xrdb/ddr.c +++ b/board/freescale/t104xrdb/ddr.c @@ -8,8 +8,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> #include "ddr.h" diff --git a/board/freescale/t2080qds/Makefile b/board/freescale/t2080qds/Makefile new file mode 100644 index 0000000..0b8747b --- /dev/null +++ b/board/freescale/t2080qds/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_T2080QDS) += t2080qds.o +obj-$(CONFIG_T2080QDS) += eth_t2080qds.o +obj-$(CONFIG_PCI) += pci.o +obj-y += ddr.o +obj-y += law.o +obj-y += tlb.o diff --git a/board/freescale/t2080qds/ddr.c b/board/freescale/t2080qds/ddr.c new file mode 100644 index 0000000..5db5d21 --- /dev/null +++ b/board/freescale/t2080qds/ddr.c @@ -0,0 +1,127 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 or later as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> +#include <hwconfig.h> +#include <asm/mmu.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> +#include <asm/fsl_law.h> +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 2) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twot_en = pbsp->force_2t; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found"); + printf("for data rate %lu MT/s\n", ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->cpo_override = pbsp_highest->cpo; + popts->write_data_delay = pbsp_highest->write_data_delay; + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twot_en = pbsp_highest->force_2t; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, " + "wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/t2080qds/ddr.h b/board/freescale/t2080qds/ddr.h new file mode 100644 index 0000000..964eaad --- /dev/null +++ b/board/freescale/t2080qds/ddr.h @@ -0,0 +1,85 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2t; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1800, 2, 5, 6, 0x06070709, 0x110a0b08, 0xff, 2, 0}, + {1, 1866, 2, 4, 6, 0x06060708, 0x09090a07, 0xff, 2, 0}, + {1, 1900, 2, 4, 6, 0x06060708, 0x09090a07, 0xff, 2, 0}, + {1, 2000, 2, 4, 8, 0x090a0b0d, 0x0e0f110b, 0xff, 2, 0}, + {1, 2133, 2, 4, 8, 0x090a0b0d, 0x0e0f110b, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906, 0xff, 2, 0}, + {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {2, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {1, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {} +}; + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + + +#endif diff --git a/board/freescale/t2080qds/eth_t2080qds.c b/board/freescale/t2080qds/eth_t2080qds.c new file mode 100644 index 0000000..3613f93 --- /dev/null +++ b/board/freescale/t2080qds/eth_t2080qds.c @@ -0,0 +1,511 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Shengzhou Liu <Shengzhou.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <malloc.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <miiphy.h> +#include <phy.h> +#include <asm/fsl_dtsec.h> +#include <asm/fsl_serdes.h> +#include "../common/qixis.h" +#include "../common/fman.h" +#include "t2080qds_qixis.h" + +#define EMI_NONE 0xFFFFFFFF +#define EMI1_RGMII1 0 +#define EMI1_RGMII2 1 +#define EMI1_SLOT1 2 +#define EMI1_SLOT2 6 +#define EMI1_SLOT3 3 +#define EMI1_SLOT4 4 +#define EMI1_SLOT5 5 +#define EMI2 7 + +static int mdio_mux[NUM_FM_PORTS]; + +static const char * const mdio_names[] = { + "T2080QDS_MDIO_RGMII1", + "T2080QDS_MDIO_RGMII2", + "T2080QDS_MDIO_SLOT1", + "T2080QDS_MDIO_SLOT3", + "T2080QDS_MDIO_SLOT4", + "T2080QDS_MDIO_SLOT5", + "T2080QDS_MDIO_SLOT2", + "T2080QDS_MDIO_10GC", +}; + +/* Map SerDes1 8 lanes to default slot, will be initialized dynamically */ +static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1}; + +static const char *T2080qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = T2080qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +struct T2080qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static void T2080qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + if (muxval < 7) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int T2080qds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct T2080qds_mdio *priv = bus->priv; + + T2080qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int T2080qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct T2080qds_mdio *priv = bus->priv; + + T2080qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int T2080qds_mdio_reset(struct mii_dev *bus) +{ + struct T2080qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int T2080qds_mdio_init(char *realbusname, u8 muxval) +{ + struct T2080qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate T2080QDS MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate T2080QDS private data\n"); + free(bus); + return -1; + } + + bus->read = T2080qds_mdio_read; + bus->write = T2080qds_mdio_write; + bus->reset = T2080qds_mdio_reset; + sprintf(bus->name, T2080qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + int phy; + char alias[20]; + struct fixed_link f_link; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + + srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + phy = fm_info_get_phy_address(port); + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC9: + case FM1_DTSEC10: + sprintf(alias, "phy_sgmii_s3_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + break; + case FM1_DTSEC5: + case FM1_DTSEC6: + if (mdio_mux[port] == EMI1_SLOT1) { + sprintf(alias, "phy_sgmii_s1_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot1"); + } else if (mdio_mux[port] == EMI1_SLOT2) { + sprintf(alias, "phy_sgmii_s2_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot2"); + } + break; + default: + break; + } + + } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) { + switch (srds_s1) { + case 0x66: /* XFI interface */ + case 0x6b: + case 0x6c: + case 0x6d: + case 0x71: + f_link.phy_id = port; + f_link.duplex = 1; + f_link.link_speed = 10000; + f_link.pause = 0; + f_link.asym_pause = 0; + /* no PHY for XFI */ + fdt_delprop(fdt, offset, "phy-handle"); + fdt_setprop(fdt, offset, "fixed-link", &f_link, + sizeof(f_link)); + break; + default: + break; + } + } +} + +void fdt_fixup_board_enet(void *fdt) +{ + return; +} + +/* + * This function reads RCW to check if Serdes1{E,F,G,H} is configured + * as slot 1/2/3 and update the lane_to_slot[] array accordingly + */ +static void initialize_lane_to_slot(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + + srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + switch (srds_s1) { + case 0x51: + case 0x5f: + case 0x65: + case 0x6b: + case 0x71: + lane_to_slot[5] = 2; + lane_to_slot[6] = 2; + lane_to_slot[7] = 2; + break; + case 0xa6: + case 0x8e: + case 0x8f: + case 0x82: + case 0x83: + case 0xd3: + case 0xd9: + case 0xcb: + lane_to_slot[6] = 2; + lane_to_slot[7] = 2; + break; + case 0xda: + lane_to_slot[4] = 3; + lane_to_slot[5] = 3; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + default: + break; + } +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FMAN_ENET) + int i, idx, lane, slot, interface; + struct memac_mdio_info dtsec_mdio_info; + struct memac_mdio_info tgec_mdio_info; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + u32 srds_s1; + + srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + initialize_lane_to_slot(); + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + dtsec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fm_memac_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the 10G MDIO bus */ + fm_memac_mdio_init(bis, &tgec_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); + T2080qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); + + /* Set the two on-board RGMII PHY address */ + fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII) + fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR); + else + fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR); + + switch (srds_s1) { + case 0x1c: + case 0x95: + case 0xa2: + case 0x94: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 0x51: + case 0x5f: + case 0x65: + /* XAUI/HiGig in Slot3 */ + fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 0x66: + /* + * XFI does not need a PHY to work, but to avoid U-boot use + * default PHY address which is zero to a MAC when it found + * a MAC has no PHY address, we give a PHY address to XFI + * MAC, and should not use a real XAUI PHY address, since + * MDIO can access it successfully, and then MDIO thinks + * the XAUI card is used for the XFI MAC, which will cause + * error. + */ + fm_info_set_phy_address(FM1_10GEC1, 4); + fm_info_set_phy_address(FM1_10GEC2, 5); + fm_info_set_phy_address(FM1_10GEC3, 6); + fm_info_set_phy_address(FM1_10GEC4, 7); + break; + case 0x6b: + fm_info_set_phy_address(FM1_10GEC1, 4); + fm_info_set_phy_address(FM1_10GEC2, 5); + fm_info_set_phy_address(FM1_10GEC3, 6); + fm_info_set_phy_address(FM1_10GEC4, 7); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + break; + case 0x6c: + case 0x6d: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + break; + case 0x71: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + break; + case 0xa6: + case 0x8e: + case 0x8f: + case 0x82: + case 0x83: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + break; + case 0xa4: + case 0x96: + case 0x8a: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 0xd9: + case 0xd3: + case 0xcb: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + break; + default: + puts("Invalid SerDes1 protocol for T2080QDS\n"); + break; + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + idx = i - FM1_DTSEC1; + interface = fm_info_get_enet_if(i); + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot[lane]; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + case 2: + mdio_mux[i] = EMI1_SLOT2; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + }; + break; + case PHY_INTERFACE_MODE_RGMII: + if (i == FM1_DTSEC3) + mdio_mux[i] = EMI1_RGMII1; + else if (i == FM1_DTSEC4 || FM1_DTSEC10) + mdio_mux[i] = EMI1_RGMII2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + idx = i - FM1_10GEC1; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + if (srds_s1 == 0x51) { + lane = serdes_get_first_lane(FSL_SRDS_1, + XAUI_FM1_MAC9 + idx); + } else if ((srds_s1 == 0x5f) || (srds_s1 == 0x65)) { + lane = serdes_get_first_lane(FSL_SRDS_1, + HIGIG_FM1_MAC9 + idx); + } else { + if (i == FM1_10GEC1 || i == FM1_10GEC2) + lane = serdes_get_first_lane(FSL_SRDS_1, + XFI_FM1_MAC9 + idx); + else + lane = serdes_get_first_lane(FSL_SRDS_1, + XFI_FM1_MAC1 + idx); + } + + if (lane < 0) + break; + mdio_mux[i] = EMI2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + + if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) || + (srds_s1 == 0x6c) || (srds_s1 == 0x6d) || + (srds_s1 == 0x71)) { + /* As XFI is in cage intead of a slot, so + * ensure doesn't disable the corresponding port + */ + break; + } + + slot = lane_to_slot[lane]; + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + break; + default: + break; + } + } + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/t2080qds/law.c b/board/freescale/t2080qds/law.c new file mode 100644 index 0000000..74e2a53 --- /dev/null +++ b/board/freescale/t2080qds/law.c @@ -0,0 +1,34 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#endif +#ifdef QIXIS_BASE_PHYS + SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + /* Limit DCSR to 32M to access NPC Trace Buffer */ + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), +#endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/t2080qds/pci.c b/board/freescale/t2080qds/pci.c new file mode 100644 index 0000000..84a89da --- /dev/null +++ b/board/freescale/t2080qds/pci.c @@ -0,0 +1,23 @@ +/* + * Copyright 2007-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/t2080qds/t2080_pbi.cfg b/board/freescale/t2080qds/t2080_pbi.cfg new file mode 100644 index 0000000..e200d92 --- /dev/null +++ b/board/freescale/t2080qds/t2080_pbi.cfg @@ -0,0 +1,41 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# +# Refer doc/README.pblimage for more details about how-to configure +# and create PBL boot image +# + +#PBI commands +#Initialize CPC1 +09010000 00200400 +09138000 00000000 +091380c0 00000100 +#512KB SRAM +09010100 00000000 +09010104 fff80009 +09010f00 08000000 +#enable CPC1 +09010000 80000000 +#Configure LAW for CPC1 +09000d00 00000000 +09000d04 fff80000 +09000d08 81000012 +#Initialize eSPI controller, default configuration is slow for eSPI to +#load data, this configuration comes from u-boot eSPI driver. +09110000 80000403 +09110020 2d170008 +09110024 00100008 +09110028 00100008 +0911002c 00100008 +#Errata for slowing down the MDC clock to make it <= 2.5 MHZ +094fc030 00008148 +094fd030 00008148 +#Configure alternate space +09000010 00000000 +09000014 ff000000 +09000018 81000000 +#Flush PBL data +09138000 00000000 +091380c0 00000000 diff --git a/board/freescale/t2080qds/t2080_rcw.cfg b/board/freescale/t2080qds/t2080_rcw.cfg new file mode 100644 index 0000000..c2ad0fd --- /dev/null +++ b/board/freescale/t2080qds/t2080_rcw.cfg @@ -0,0 +1,8 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +#SerDes Protocol: 0x66_0x16 +#Core/DDR: 1533Mhz/2133MT/s +12100017 15000000 00000000 00000000 +66160002 00008400 e8104000 c1000000 +00000000 00000000 00000000 000307fc +00000000 00000000 00000000 00000004 diff --git a/board/freescale/t2080qds/t2080qds.c b/board/freescale/t2080qds/t2080qds.c new file mode 100644 index 0000000..cac32fe --- /dev/null +++ b/board/freescale/t2080qds/t2080qds.c @@ -0,0 +1,324 @@ +/* + * Copyright 2009-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <fm_eth.h> + +#include "../common/qixis.h" +#include "../common/vsc3316_3308.h" +#include "t2080qds.h" +#include "t2080qds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + char buf[64]; + u8 sw; + struct cpu_type *cpu = gd->arch.cpu; + static const char *freq[4] = { + "100.00MHZ(from 8T49N222A)", "125.00MHz", + "156.25MHZ", "100.00MHz" + }; + + printf("Board: %sQDS, ", cpu->name); + sw = QIXIS_READ(arch); + printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4); + printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank%d\n", sw); + else if (sw == 0x8) + puts("Promjet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + + printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver), + qixis_read_tag(buf), (int)qixis_read_minor()); + /* the timestamp string contains "\n" at the end */ + printf(" on %s", qixis_read_time(buf)); + + puts("SERDES Reference Clocks:\n"); + sw = QIXIS_READ(brdcfg[2]); + printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[sw >> 6], + freq[(sw >> 4) & 0x3]); + printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[(sw & 0xf) >> 2], + freq[sw & 0x3]); + + return 0; +} + +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + +int brd_mux_lane_to_slot(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + + switch (srds_prtcl_s1) { + case 0: + /* SerDes1 is not enabled */ + break; + case 0x1c: + case 0x95: + case 0xa2: + case 0x94: + /* SD1(A:D) => SLOT3 SGMII + * SD1(G:H) => SLOT1 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x58); + break; + case 0x51: + /* SD1(A:D) => SLOT3 XAUI + * SD1(E) => SLOT1 PCIe4 + * SD1(F:H) => SLOT2 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x15); + break; + case 0x66: + case 0x67: + /* SD1(A:D) => XFI cage + * SD1(E:H) => SLOT1 PCIe4 + */ + QIXIS_WRITE(brdcfg[12], 0xfe); + break; + case 0x6b: + /* SD1(A:D) => XFI cage + * SD1(E) => SLOT1 PCIe4 + * SD1(F:H) => SLOT2 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0xf1); + break; + case 0x6c: + case 0x6d: + /* SD1(A:B) => XFI cage + * SD1(C:D) => SLOT3 SGMII + * SD1(E:H) => SLOT1 PCIe4 + */ + QIXIS_WRITE(brdcfg[12], 0xda); + break; + default: + printf("WARNING: unsupported for SerDes1 Protocol %d\n", + srds_prtcl_s1); + return -1; + } + + switch (srds_prtcl_s2) { + case 0: + /* SerDes2 is not enabled */ + break; + case 0x01: + case 0x02: + /* SD2(A:H) => SLOT4 PCIe1 */ + QIXIS_WRITE(brdcfg[13], 0x20); + break; + case 0x15: + case 0x16: + /* + * SD2(A:D) => SLOT4 PCIe1 + * SD2(E:F) => SLOT5 PCIe2 + * SD2(G:H) => SATA1,SATA2 + */ + QIXIS_WRITE(brdcfg[13], 0xb0); + break; + case 0x18: + /* + * SD2(A:D) => SLOT4 PCIe1 + * SD2(E:F) => SLOT5 Aurora + * SD2(G:H) => SATA1,SATA2 + */ + QIXIS_WRITE(brdcfg[13], 0x70); + break; + case 0x1f: + /* + * SD2(A:D) => SLOT4 PCIe1 + * SD2(E:H) => SLOT5 PCIe2 + */ + QIXIS_WRITE(brdcfg[13], 0xa0); + break; + case 0x29: + case 0x2d: + case 0x2e: + /* + * SD2(A:D) => SLOT4 SRIO2 + * SD2(E:H) => SLOT5 SRIO1 + */ + QIXIS_WRITE(brdcfg[13], 0x50); + break; + default: + printf("WARNING: unsupported for SerDes2 Protocol %d\n", + srds_prtcl_s2); + return -1; + } + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + /* Disable remote I2C connection to qixis fpga */ + QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE); + + brd_mux_lane_to_slot(); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + + return 0; +} + +unsigned long get_board_sys_clk(void) +{ + u8 sysclk_conf = QIXIS_READ(brdcfg[1]); +#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT + /* use accurate clock measurement */ + int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]); + int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]); + u32 val; + + val = freq * base; + if (val) { + debug("SYS Clock measurement is: %d\n", val); + return val; + } else { + printf("Warning: SYS clock measurement is invalid, "); + printf("using value from brdcfg1.\n"); + } +#endif + + switch (sysclk_conf & 0x0F) { + case QIXIS_SYSCLK_83: + return 83333333; + case QIXIS_SYSCLK_100: + return 100000000; + case QIXIS_SYSCLK_125: + return 125000000; + case QIXIS_SYSCLK_133: + return 133333333; + case QIXIS_SYSCLK_150: + return 150000000; + case QIXIS_SYSCLK_160: + return 160000000; + case QIXIS_SYSCLK_166: + return 166666666; + } + return 66666666; +} + +unsigned long get_board_ddr_clk(void) +{ + u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); +#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT + /* use accurate clock measurement */ + int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]); + int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]); + u32 val; + + val = freq * base; + if (val) { + debug("DDR Clock measurement is: %d\n", val); + return val; + } else { + printf("Warning: DDR clock measurement is invalid, "); + printf("using value from brdcfg1.\n"); + } +#endif + + switch ((ddrclk_conf & 0x30) >> 4) { + case QIXIS_DDRCLK_100: + return 100000000; + case QIXIS_DDRCLK_125: + return 125000000; + case QIXIS_DDRCLK_133: + return 133333333; + } + return 66666666; +} + +int misc_init_r(void) +{ + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); +#endif +} diff --git a/board/freescale/t2080qds/t2080qds.h b/board/freescale/t2080qds/t2080qds.h new file mode 100644 index 0000000..39fcef2 --- /dev/null +++ b/board/freescale/t2080qds/t2080qds.h @@ -0,0 +1,13 @@ +/* + * Copyright 2011-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CORENET_DS_H__ +#define __CORENET_DS_H__ + +void fdt_fixup_board_enet(void *blob); +void pci_of_setup(void *blob, bd_t *bd); + +#endif diff --git a/board/freescale/t2080qds/t2080qds_qixis.h b/board/freescale/t2080qds/t2080qds_qixis.h new file mode 100644 index 0000000..fc83da7 --- /dev/null +++ b/board/freescale/t2080qds/t2080qds_qixis.h @@ -0,0 +1,47 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __T2080QDS_QIXIS_H__ +#define __T2080QDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for T2080QDS */ + +#define QIXIS_SRDS1CLK_122 0x5a +#define QIXIS_SRDS1CLK_125 0x5e + + +/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xE0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 +#define QIXIS_SYSCLK_150 0x5 +#define QIXIS_SYSCLK_160 0x6 +#define QIXIS_SYSCLK_166 0x7 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */ + +#define BRDCFG12_SD3EN_MASK 0x20 +#define BRDCFG12_SD3MX_MASK 0x08 +#define BRDCFG12_SD3MX_SLOT5 0x08 +#define BRDCFG12_SD3MX_SLOT6 0x00 +#define BRDCFG12_SD4EN_MASK 0x04 +#define BRDCFG12_SD4MX_MASK 0x03 +#define BRDCFG12_SD4MX_SLOT7 0x02 +#define BRDCFG12_SD4MX_SLOT8 0x01 +#define BRDCFG12_SD4MX_AURO_SATA 0x00 +#endif diff --git a/board/freescale/t2080qds/tlb.c b/board/freescale/t2080qds/tlb.c new file mode 100644 index 0000000..62cd110 --- /dev/null +++ b/board/freescale/t2080qds/tlb.c @@ -0,0 +1,146 @@ +/* + * Copyright 2008-2013 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the + * SRAM is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) + /* + * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the + * space is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR, + CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCIe 1, 0x80000000 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_512M, 1), + + /* *I*G* - PCIe 2, 0xa0000000 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCIe 3, 0xb0000000 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + + /* *I*G* - PCIe 4, 0xc0000000 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE4_MEM_VIRT, CONFIG_SYS_PCIE4_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_32M, 1), +#endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 16, BOOKE_PAGESZ_64K, 1), +#endif +#ifdef QIXIS_BASE_PHYS + SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 17, BOOKE_PAGESZ_4K, 1), +#endif +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE + /* + * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for + * fetching ucode and ENV from master + */ + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR, + CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 18, BOOKE_PAGESZ_1M, 1), +#endif + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index d70c310..7586cc3 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -10,8 +10,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> #include "ddr.h" diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index b5f488b..24cf907 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c index 81c22bc..8ccd9ce 100644 --- a/board/gdsys/p1022/controlcenterd.c +++ b/board/gdsys/p1022/controlcenterd.c @@ -29,7 +29,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <libfdt.h> diff --git a/board/gdsys/p1022/ddr.c b/board/gdsys/p1022/ddr.c index 4a652de..7596736 100644 --- a/board/gdsys/p1022/ddr.c +++ b/board/gdsys/p1022/ddr.c @@ -12,8 +12,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/keymile/kmp204x/ddr.c b/board/keymile/kmp204x/ddr.c index bd425aa..34ac697 100644 --- a/board/keymile/kmp204x/ddr.c +++ b/board/keymile/kmp204x/ddr.c @@ -11,8 +11,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/sbc8548/Makefile b/board/sbc8548/Makefile index b1e32a6..4c9b6cd 100644 --- a/board/sbc8548/Makefile +++ b/board/sbc8548/Makefile @@ -11,4 +11,4 @@ obj-y += sbc8548.o obj-y += law.o obj-y += tlb.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c index 9508561..24cc776 100644 --- a/board/sbc8548/ddr.c +++ b/board/sbc8548/ddr.c @@ -9,8 +9,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, @@ -91,7 +91,8 @@ void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) */ phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); out_be32(&ddr->cs0_bnds, 0x0000007f); out_be32(&ddr->cs1_bnds, 0x008000ff); diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 3cd945f..d584276 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -15,7 +15,7 @@ #include <asm/processor.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <spd_sdram.h> #include <netdev.h> diff --git a/board/sbc8641d/Makefile b/board/sbc8641d/Makefile index 9626b06..a9b2026 100644 --- a/board/sbc8641d/Makefile +++ b/board/sbc8641d/Makefile @@ -7,4 +7,4 @@ obj-y += sbc8641d.o obj-y += law.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/sbc8641d/ddr.c b/board/sbc8641d/ddr.c index 996ffe2..b31ea34 100644 --- a/board/sbc8641d/ddr.c +++ b/board/sbc8641d/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 0b5e8dc..4906be4 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -18,7 +18,7 @@ #include <asm/processor.h> #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <libfdt.h> #include <fdt_support.h> @@ -93,7 +93,7 @@ long int fixed_sdram (void) { #if !defined(CONFIG_SYS_RAMBOOT) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + volatile struct ccsr_ddr *ddr = &immap->im_ddr1; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS; @@ -111,7 +111,7 @@ long int fixed_sdram (void) ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2; ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; - ddr->sdram_mode_cntl = CONFIG_SYS_DDR_MODE_CTL; + ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL; ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; @@ -142,7 +142,7 @@ long int fixed_sdram (void) ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2; ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1; ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2; - ddr->sdram_mode_cntl = CONFIG_SYS_DDR2_MODE_CTL; + ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL; ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL; ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT; ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL; diff --git a/board/socrates/Makefile b/board/socrates/Makefile index 0a08810..79bda71 100644 --- a/board/socrates/Makefile +++ b/board/socrates/Makefile @@ -12,4 +12,4 @@ obj-y += law.o obj-y += tlb.o obj-y += nand.o obj-y += sdram.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/socrates/ddr.c b/board/socrates/ddr.c index e9db476..6bad4da 100644 --- a/board/socrates/ddr.c +++ b/board/socrates/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c index 313efae..aebd02f 100644 --- a/board/socrates/sdram.c +++ b/board/socrates/sdram.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/processor.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/processor.h> #include <asm/mmu.h> #include <spd_sdram.h> @@ -24,7 +24,8 @@ */ phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); /* * Disable memory controller. diff --git a/board/stx/stxgp3/Makefile b/board/stx/stxgp3/Makefile index 9b72434..78e2d6c 100644 --- a/board/stx/stxgp3/Makefile +++ b/board/stx/stxgp3/Makefile @@ -9,4 +9,4 @@ obj-y += stxgp3.o obj-y += law.o obj-y += tlb.o obj-y += flash.o -obj-$(CONFIG_FSL_DDR1) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR1) += ddr.o diff --git a/board/stx/stxgp3/ddr.c b/board/stx/stxgp3/ddr.c index 9e79815..41d4cfe 100644 --- a/board/stx/stxgp3/ddr.c +++ b/board/stx/stxgp3/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/stx/stxgp3/stxgp3.c b/board/stx/stxgp3/stxgp3.c index bd683f6..c80d525 100644 --- a/board/stx/stxgp3/stxgp3.c +++ b/board/stx/stxgp3/stxgp3.c @@ -18,7 +18,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <asm/io.h> #include <spd_sdram.h> diff --git a/board/stx/stxssa/Makefile b/board/stx/stxssa/Makefile index 17e0aae..b1d4b0a 100644 --- a/board/stx/stxssa/Makefile +++ b/board/stx/stxssa/Makefile @@ -8,4 +8,4 @@ obj-y += stxssa.o obj-y += law.o obj-y += tlb.o -obj-$(CONFIG_FSL_DDR1) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR1) += ddr.o diff --git a/board/stx/stxssa/ddr.c b/board/stx/stxssa/ddr.c index 71be3bf..1ccd4c5 100644 --- a/board/stx/stxssa/ddr.c +++ b/board/stx/stxssa/ddr.c @@ -9,8 +9,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c index c08a18b..f5c3d75 100644 --- a/board/stx/stxssa/stxssa.c +++ b/board/stx/stxssa/stxssa.c @@ -19,7 +19,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <asm/io.h> #include <spd_sdram.h> diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c index f48c02f..fd602ea 100644 --- a/board/xes/xpedite517x/ddr.c +++ b/board/xes/xpedite517x/ddr.c @@ -7,8 +7,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c index 1782042..b7ad349 100644 --- a/board/xes/xpedite517x/xpedite517x.c +++ b/board/xes/xpedite517x/xpedite517x.c @@ -6,7 +6,7 @@ #include <common.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/mmu.h> #include <asm/io.h> #include <fdt_support.h> diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c index 3671cb8..5c5eadc 100644 --- a/board/xes/xpedite520x/ddr.c +++ b/board/xes/xpedite520x/ddr.c @@ -9,8 +9,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) { diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c index f41ae73..56b5a18 100644 --- a/board/xes/xpedite537x/ddr.c +++ b/board/xes/xpedite537x/ddr.c @@ -8,8 +8,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c index 9fc6f04..0c0605e 100644 --- a/board/xes/xpedite550x/ddr.c +++ b/board/xes/xpedite550x/ddr.c @@ -8,8 +8,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void get_spd(ddr3_spd_eeprom_t *spd, u8 i2c_address) { @@ -962,9 +962,14 @@ Active powerpc mpc85xx - freescale t4qds Active powerpc mpc85xx - freescale t4qds T4240QDS_SDCARD T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - Active powerpc mpc85xx - freescale t4qds T4240QDS_SPIFLASH T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - Active powerpc mpc85xx - freescale t4qds T4240QDS_SRIO_PCIE_BOOT T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale t1040qds T1040QDS T1040QDS:PPC_T1040 Naveen Burmi <NaveenBurmi@freescale.com> +Active powerpc mpc85xx - freescale t1040qds T1040QDS T1040QDS:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com> Active powerpc mpc85xx - freescale t104xrdb T1040RDB T1040RDB:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com> Active powerpc mpc85xx - freescale t104xrdb T1042RDB_PI T1042RDB_PI:PPC_T1042 Poonam Aggrwal <poonam.aggrwal@freescale.com> +Active powerpc mpc85xx - freescale t2080qds T2080QDS T2080QDS:PPC_T2080 +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SDCARD T2080QDS:PPC_T2080,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SPIFLASH T2080QDS:PPC_T2080,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +Active powerpc mpc85xx - freescale t2080qds T2080QDS_NAND T2080QDS:PPC_T2080,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SRIO_PCIE_BOOT T2080QDS:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD controlcenterd:36BIT,SDCARD Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD_DEVELOP controlcenterd:36BIT,SDCARD,DEVELOP Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER controlcenterd:TRAILBLAZER,SPIFLASH Dirk Eibach <eibach@gdsys.de> diff --git a/drivers/ddr/fsl/Makefile b/drivers/ddr/fsl/Makefile new file mode 100644 index 0000000..265204f --- /dev/null +++ b/drivers/ddr/fsl/Makefile @@ -0,0 +1,34 @@ +# +# Copyright 2008-2011 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# Version 2 as published by the Free Software Foundation. +# + +obj-$(CONFIG_SYS_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o + +obj-$(CONFIG_SYS_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o + +obj-$(CONFIG_SYS_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o +ifdef CONFIG_DDR_SPD +SPD := y +endif +ifdef CONFIG_SPD_EEPROM +SPD := y +endif +ifdef SPD +obj-$(CONFIG_SYS_FSL_DDR1) += ddr1_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr2_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR3) += ddr3_dimm_params.o +endif + +obj-$(CONFIG_FSL_DDR_INTERACTIVE) += interactive.o +obj-$(CONFIG_SYS_FSL_DDRC_GEN1) += mpc85xx_ddr_gen1.o +obj-$(CONFIG_SYS_FSL_DDRC_GEN2) += mpc85xx_ddr_gen2.o +obj-$(CONFIG_SYS_FSL_DDRC_GEN3) += mpc85xx_ddr_gen3.o +obj-$(CONFIG_SYS_FSL_DDR_86XX) += mpc86xx_ddr.o +obj-$(CONFIG_SYS_FSL_DDRC_ARM_GEN3) += arm_ddr_gen3.o diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c new file mode 100644 index 0000000..bf11390 --- /dev/null +++ b/drivers/ddr/fsl/arm_ddr_gen3.c @@ -0,0 +1,213 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Derived from mpc85xx_ddr_gen3.c, removed all workarounds + */ + +#include <common.h> +#include <asm/io.h> +#include <fsl_ddr_sdram.h> +#include <asm/processor.h> +#include <fsl_immap.h> + +#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) +#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL +#endif + + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ +void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num, int step) +{ + unsigned int i, bus_width; + struct ccsr_ddr __iomem *ddr; + u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; + + switch (ctrl_num) { + case 0: + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + break; +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) + case 1: + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) + case 2: + ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) + case 3: + ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; + break; +#endif + default: + printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num); + return; + } + + if (step == 2) + goto step2; + + if (regs->ddr_eor) + out_be32(&ddr->eor, regs->ddr_eor); + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i == 0) { + out_be32(&ddr->cs0_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs0_config, regs->cs[i].config); + out_be32(&ddr->cs0_config_2, regs->cs[i].config_2); + + } else if (i == 1) { + out_be32(&ddr->cs1_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs1_config, regs->cs[i].config); + out_be32(&ddr->cs1_config_2, regs->cs[i].config_2); + + } else if (i == 2) { + out_be32(&ddr->cs2_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs2_config, regs->cs[i].config); + out_be32(&ddr->cs2_config_2, regs->cs[i].config_2); + + } else if (i == 3) { + out_be32(&ddr->cs3_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs3_config, regs->cs[i].config); + out_be32(&ddr->cs3_config_2, regs->cs[i].config_2); + } + } + + out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3); + out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0); + out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1); + out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2); + out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); + out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); + out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3); + out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4); + out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5); + out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6); + out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7); + out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8); + out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); + out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); + out_be32(&ddr->sdram_data_init, regs->ddr_data_init); + out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); + out_be32(&ddr->init_addr, regs->ddr_init_addr); + out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); + + out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4); + out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); + out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); + out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); +#ifndef CONFIG_SYS_FSL_DDR_EMU + /* + * Skip these two registers if running on emulator + * because emulator doesn't have skew between bytes. + */ + + if (regs->ddr_wrlvl_cntl_2) + out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); +#endif + + out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); + out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); + out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); + out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1); + out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2); + out_be32(&ddr->err_disable, regs->err_disable); + out_be32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 32; i++) { + if (regs->debug[i]) { + debug("Write to debug_%d as %08x\n", i + 1, + regs->debug[i]); + out_be32(&ddr->debug[i], regs->debug[i]); + } + } + + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: + /* Set, but do not enable the memory */ + temp_sdram_cfg = regs->ddr_sdram_cfg; + temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); + out_be32(&ddr->sdram_cfg, temp_sdram_cfg); + + /* + * 500 painful micro-seconds must elapse between + * the DDR clock setup and the DDR config enable. + * DDR2 need 200 us, and DDR3 need 500 us from spec, + * we choose the max, that is 500 us for all of case. + */ + udelay(500); + asm volatile("dsb sy;isb"); + + /* Let the controller go */ + temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); + asm volatile("dsb sy;isb"); + + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (regs->cs[0].config & 0x20000000) { + /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + } + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (get_ddr_freq(0) >> 20)) << 1; + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); +} diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index dcfc48a..6bf22cf 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -11,15 +11,17 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> +#include <fsl_immap.h> +#include <asm/io.h> -#define _DDR_ADDR CONFIG_SYS_MPC8xxx_DDR_ADDR +#define _DDR_ADDR CONFIG_SYS_FSL_DDR_ADDR static u32 fsl_ddr_get_version(void) { - ccsr_ddr_t *ddr; + struct ccsr_ddr __iomem *ddr; u32 ver_major_minor_errata; ddr = (void *)_DDR_ADDR; @@ -68,9 +70,9 @@ static inline int fsl_ddr_get_rtt(void) { int rtt; -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) rtt = 0; -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) rtt = 3; #else rtt = 0; @@ -217,7 +219,7 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) /* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */ -#if !defined(CONFIG_FSL_DDR1) +#if !defined(CONFIG_SYS_FSL_DDR1) static inline int avoid_odt_overlap(const dimm_params_t *dimm_params) { #if CONFIG_DIMM_SLOTS_PER_CTLR == 1 @@ -263,7 +265,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, /* Mode register set cycle time (tMRD). */ unsigned char tmrd_mclk; -#ifdef CONFIG_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR3 /* * (tXARD and tXARDS). Empirical? * The DDR3 spec has not tXARD, @@ -302,7 +304,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, pre_pd_exit_mclk = act_pd_exit_mclk; taxpd_mclk = 1; } -#else /* CONFIG_FSL_DDR2 */ +#else /* CONFIG_SYS_FSL_DDR2 */ /* * (tXARD and tXARDS). Empirical? * tXARD = 2 for DDR2 @@ -323,20 +325,21 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, | ((twrt_mclk & 0x3) << 28) /* WRT */ | ((trrt_mclk & 0x3) << 26) /* RRT */ | ((twwt_mclk & 0x3) << 24) /* WWT */ - | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */ + | ((act_pd_exit_mclk & 0xf) << 20) /* ACT_PD_EXIT */ | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */ | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */ - | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */ + | ((tmrd_mclk & 0x1f) << 0) /* MRS_CYC */ ); debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0); } -#endif /* defined(CONFIG_FSL_DDR2) */ +#endif /* defined(CONFIG_SYS_FSL_DDR2) */ /* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, - unsigned int cas_latency) + unsigned int cas_latency, + unsigned int additive_latency) { /* Extended precharge to activate interval (tRP) */ unsigned int ext_pretoact = 0; @@ -348,6 +351,8 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, unsigned int ext_refrec; /* Extended MCAS latency from READ cmd */ unsigned int ext_caslat = 0; + /* Extended additive latency */ + unsigned int ext_add_lat = 0; /* Extended last data to precharge interval (tWR) */ unsigned int ext_wrrec = 0; /* Control Adjust */ @@ -357,6 +362,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, ext_acttopre = picos_to_mclk(common_dimm->tras_ps) >> 4; ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4; ext_caslat = (2 * cas_latency - 1) >> 4; + ext_add_lat = additive_latency >> 4; ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4; /* ext_wrrec only deals with 16 clock and above, or 14 with OTF */ ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) + @@ -368,6 +374,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, | ((ext_acttorw & 0x1) << 22) | ((ext_refrec & 0x1F) << 16) | ((ext_caslat & 0x3) << 12) + | ((ext_add_lat & 0x1) << 10) | ((ext_wrrec & 0x1) << 8) | ((cntl_adj & 0x7) << 0) ); @@ -420,9 +427,9 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, * 4.5 1000 * 5.0 5 1001 */ -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) caslat_ctrl = (cas_latency + 1) & 0x07; -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) caslat_ctrl = 2 * cas_latency - 1; #else /* @@ -447,7 +454,7 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, /* * JEDEC has min requirement for tRRD */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) if (acttoact_mclk < 4) acttoact_mclk = 4; #endif @@ -455,10 +462,10 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, /* * JEDEC has some min requirements for tWTR */ -#if defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR2) if (wrtord_mclk < 2) wrtord_mclk = 2; -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) if (wrtord_mclk < 4) wrtord_mclk = 4; #endif @@ -504,7 +511,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, add_lat_mclk = additive_latency; cpo = popts->cpo_override; -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) /* * This is a lie. It should really be 1, but if it is * set to 1, bits overlap into the old controller's @@ -512,7 +519,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, * the HW will magically treat it as 1 for DDR 1. Oh Yea. */ wr_lat = 0; -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) wr_lat = cas_latency - 1; #else wr_lat = compute_cas_write_latency(); @@ -522,15 +529,13 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, /* * JEDEC has some min requirements for tRTP */ -#if defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR2) if (rd_to_pre < 2) rd_to_pre = 2; -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) if (rd_to_pre < 4) rd_to_pre = 4; #endif - if (additive_latency) - rd_to_pre += additive_latency; if (popts->otf_burst_chop_en) rd_to_pre += 2; /* according to UM */ @@ -709,7 +714,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, * * ({EXT_REFREC || REFREC} + 8 + 2)]} * << DDR_SDRAM_INTERVAL[REFINT] */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) obc_cfg = popts->otf_burst_chop_en; #else obc_cfg = 0; @@ -738,7 +743,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, d_init = 0; #endif -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) md_en = popts->mirrored_dimm; #endif qd_en = popts->quad_rank_present ? 1 : 0; @@ -771,7 +776,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) int i; unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ unsigned int srt = 0; /* self-refresh temerature, normal range */ @@ -800,7 +805,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, ); debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); -#ifdef CONFIG_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR3 if (unq_mrs_en) { /* unique mode registers are supported */ for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (popts->rtt_override) @@ -861,7 +866,7 @@ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval); } -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, @@ -1057,7 +1062,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, } } -#else /* !CONFIG_FSL_DDR3 */ +#else /* !CONFIG_SYS_FSL_DDR3 */ /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, @@ -1103,7 +1108,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, unsigned int bt; unsigned int bl; /* BL: Burst Length */ -#if defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR2) const unsigned int mclk_ps = get_memory_clk_period_ps(); #endif dqs_en = !popts->dqs_config; @@ -1132,15 +1137,15 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, */ pd = 0; -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) wr = 0; /* Historical */ -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) wr = (common_dimm->twr_ps + mclk_ps - 1) / mclk_ps - 1; #endif dll_res = 0; mode = 0; -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) if (1 <= cas_latency && cas_latency <= 4) { unsigned char mode_caslat_table[4] = { 0x5, /* 1.5 clocks */ @@ -1152,7 +1157,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, } else { printf("Warning: unknown cas_latency %d\n", cas_latency); } -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) caslat = cas_latency; #endif bt = 0; @@ -1249,7 +1254,7 @@ static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr, unsigned int wwt = 0; /* Write-to-write turnaround for same CS */ unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) if (popts->burst_length == DDR_BL8) { /* We set BL/2 for fixed BL8 */ rrt = 0; /* BL/2 clocks */ @@ -1279,7 +1284,7 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr, unsigned int cas_latency) unsigned int wodt_on = 0; /* Write to ODT on */ unsigned int wodt_off = 0; /* Write to ODT off */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) /* rodt_on = timing_cfg_1[caslat] - timing_cfg_2[wrlat] + 1 */ rodt_on = cas_latency - ((ddr->timing_cfg_2 & 0x00780000) >> 19) + 1; rodt_off = 4; /* 4 clocks */ @@ -1590,8 +1595,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, if (cs_en) { ddr->cs[i].bnds = (0 - | ((sa & 0xFFF) << 16)/* starting address MSB */ - | ((ea & 0xFFF) << 0) /* ending address MSB */ + | ((sa & 0xffff) << 16) /* starting address */ + | ((ea & 0xffff) << 0) /* ending address */ ); } else { /* setting bnds to 0xffffffff for inactive CS */ @@ -1612,11 +1617,12 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_eor(ddr, popts); -#if !defined(CONFIG_FSL_DDR1) +#if !defined(CONFIG_SYS_FSL_DDR1) set_timing_cfg_0(ddr, popts, dimm_params); #endif - set_timing_cfg_3(ddr, popts, common_dimm, cas_latency); + set_timing_cfg_3(ddr, popts, common_dimm, cas_latency, + additive_latency); set_timing_cfg_1(ddr, popts, common_dimm, cas_latency); set_timing_cfg_2(ddr, popts, common_dimm, cas_latency, additive_latency); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c b/drivers/ddr/fsl/ddr1_dimm_params.c index f137fce..7df27b9 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c +++ b/drivers/ddr/fsl/ddr1_dimm_params.c @@ -7,9 +7,9 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> /* * Calculate the Density of each Physical Rank. diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c b/drivers/ddr/fsl/ddr2_dimm_params.c index e4d02e8..d865df7 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c +++ b/drivers/ddr/fsl/ddr2_dimm_params.c @@ -7,9 +7,9 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> /* * Calculate the Density of each Physical Rank. * Returned size is in bytes. diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c index 4c8645d..a4b8c10 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/drivers/ddr/fsl/ddr3_dimm_params.c @@ -12,9 +12,9 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> /* * Calculate the Density of each Physical Rank. diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/drivers/ddr/fsl/interactive.c index 3b66112..ebf3ed6 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/drivers/ddr/fsl/interactive.c @@ -14,9 +14,10 @@ #include <common.h> #include <linux/ctype.h> #include <asm/types.h> +#include <asm/io.h> -#include <asm/fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr_sdram.h> +#include <fsl_ddr.h> /* Option parameter Structures */ struct options_string { @@ -402,7 +403,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS_CS(3, odt_rd_cfg), CTRL_OPTIONS_CS(3, odt_wr_cfg), #endif -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) CTRL_OPTIONS_CS(0, odt_rtt_norm), CTRL_OPTIONS_CS(0, odt_rtt_wr), #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) @@ -647,7 +648,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS_CS(3, odt_rd_cfg), CTRL_OPTIONS_CS(3, odt_wr_cfg), #endif -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) CTRL_OPTIONS_CS(0, odt_rtt_norm), CTRL_OPTIONS_CS(0, odt_rtt_wr), #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) @@ -710,7 +711,7 @@ static void print_memctl_options(const memctl_options_t *popts) print_option_table(options, n_opts, popts); } -#ifdef CONFIG_FSL_DDR1 +#ifdef CONFIG_SYS_FSL_DDR1 void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd) { unsigned int i; @@ -859,7 +860,7 @@ void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd) } #endif -#ifdef CONFIG_FSL_DDR2 +#ifdef CONFIG_SYS_FSL_DDR2 void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd) { unsigned int i; @@ -1051,7 +1052,7 @@ void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd) } #endif -#ifdef CONFIG_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR3 void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd) { unsigned int i; @@ -1246,11 +1247,11 @@ void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd) static inline void generic_spd_dump(const generic_spd_eeprom_t *spd) { -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) ddr1_spd_dump(spd); -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) ddr2_spd_dump(spd); -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) ddr3_spd_dump(spd); #endif } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index 332fe25..610318a 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -7,11 +7,11 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) static unsigned int compute_cas_latency_ddr3(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, @@ -103,7 +103,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, unsigned int temp1, temp2; unsigned int additive_latency = 0; -#if !defined(CONFIG_FSL_DDR3) +#if !defined(CONFIG_SYS_FSL_DDR3) const unsigned int mclk_ps = get_memory_clk_period_ps(); unsigned int lowest_good_caslat; unsigned int not_ok; @@ -265,7 +265,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (temp1 != 0) printf("ERROR: Mix different RDIMM detected!\n"); -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms)) return 1; #else @@ -386,7 +386,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } outpdimm->highest_common_derated_caslat = temp1; debug("highest common dereated CAS latency = %u\n", temp1); -#endif /* #if defined(CONFIG_FSL_DDR3) */ +#endif /* #if defined(CONFIG_SYS_FSL_DDR3) */ /* Determine if all DIMMs ECC capable. */ temp1 = 1; @@ -404,7 +404,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } outpdimm->all_dimms_ecc_capable = temp1; -#ifndef CONFIG_FSL_DDR3 +#ifndef CONFIG_SYS_FSL_DDR3 /* FIXME: move to somewhere else to validate. */ if (mclk_ps > tckmax_max_ps) { printf("Warning: some of the installed DIMMs " @@ -467,7 +467,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, additive_latency = 0; -#if defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR2) if (lowest_good_caslat < 4) { additive_latency = (picos_to_mclk(trcd_ps) > lowest_good_caslat) ? picos_to_mclk(trcd_ps) - lowest_good_caslat : 0; @@ -478,7 +478,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } } -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) /* * The system will not use the global auto-precharge mode. * However, it uses the page mode, so we set AL=0 diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/drivers/ddr/fsl/main.c index 34d8bc3a..d0cd589 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/drivers/ddr/fsl/main.c @@ -14,17 +14,19 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_law.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr.h> -#include "ddr.h" +#ifdef CONFIG_PPC +#include <asm/fsl_law.h> void fsl_ddr_set_lawbar( const common_timing_params_t *memctl_common_params, unsigned int memctl_interleaved, unsigned int ctrl_num); -void fsl_ddr_set_intl3r(const unsigned int granule_size); +#endif +void fsl_ddr_set_intl3r(const unsigned int granule_size); #if defined(SPD_EEPROM_ADDRESS) || \ defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) @@ -253,7 +255,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]); } - current_mem_base = 0ull; + current_mem_base = CONFIG_SYS_DDR_SDRAM_BASE; total_mem = 0; if (pinfo->memctl_opts[0].memctl_interleaving) { rank_density = pinfo->dimm_params[0][0].rank_density >> @@ -533,8 +535,8 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, } } - total_mem = 1 + (((unsigned long long)max_end << 24ULL) - | 0xFFFFFFULL); + total_mem = 1 + (((unsigned long long)max_end << 24ULL) | + 0xFFFFFFULL) - CONFIG_SYS_DDR_SDRAM_BASE; } return total_mem; @@ -549,7 +551,9 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, phys_size_t fsl_ddr_sdram(void) { unsigned int i; +#ifdef CONFIG_PPC unsigned int law_memctl = LAW_TRGT_IF_DDR_1; +#endif unsigned long long total_memory; fsl_ddr_info_t info; int deassert_reset; @@ -621,6 +625,7 @@ phys_size_t fsl_ddr_sdram(void) } } +#ifdef CONFIG_PPC /* program LAWs */ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { if (info.memctl_opts[i].memctl_interleaving) { @@ -681,6 +686,7 @@ phys_size_t fsl_ddr_sdram(void) law_memctl, i); } } +#endif debug("total_memory by %s = %llu\n", __func__, total_memory); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/drivers/ddr/fsl/mpc85xx_ddr_gen1.c index 4dd8c0b..8dd4a91 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen1.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL @@ -18,7 +18,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num, int step) { unsigned int i; - volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; if (ctrl_num != 0) { printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); @@ -73,7 +74,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, void ddr_enable_ecc(unsigned int dram_size) { - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c index 542bc84..988b4a4 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c @@ -9,7 +9,7 @@ #include <common.h> #include <asm/io.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL @@ -19,7 +19,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num, int step) { unsigned int i; - ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; #if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c index 1be51d3..9f04133 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/processor.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) @@ -29,7 +29,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num, int step) { unsigned int i, bus_width; - volatile ccsr_ddr_t *ddr; + struct ccsr_ddr __iomem *ddr; u32 temp_sdram_cfg; u32 total_gb_size_per_controller; int timeout; @@ -42,21 +42,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, switch (ctrl_num) { case 0: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; break; -#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; break; #endif default: diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/drivers/ddr/fsl/mpc86xx_ddr.c index 33a91f9..4551ed8 100644 --- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c +++ b/drivers/ddr/fsl/mpc86xx_ddr.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL @@ -18,14 +18,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num, int step) { unsigned int i; - volatile ccsr_ddr_t *ddr; + struct ccsr_ddr __iomem *ddr; switch (ctrl_num) { case 0: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; break; case 1: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; break; default: printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); @@ -58,7 +58,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); - out_be32(&ddr->sdram_mode_cntl, regs->ddr_sdram_md_cntl); + out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); out_be32(&ddr->sdram_data_init, regs->ddr_data_init); out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/drivers/ddr/fsl/options.c index 1297845..4aafcce 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/drivers/ddr/fsl/options.c @@ -6,9 +6,9 @@ #include <common.h> #include <hwconfig.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> /* * Use our own stack based buffer before relocation to allow accessing longer @@ -29,7 +29,7 @@ struct dynamic_odt { unsigned int odt_rtt_wr; }; -#ifdef CONFIG_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR3 static const struct dynamic_odt single_Q[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, @@ -259,7 +259,7 @@ static const struct dynamic_odt odt_unknown[4] = { DDR3_RTT_OFF } }; -#else /* CONFIG_FSL_DDR3 */ +#else /* CONFIG_SYS_FSL_DDR3 */ static const struct dynamic_odt single_Q[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, @@ -507,7 +507,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, unsigned int i; char buffer[HWCONFIG_BUFFER_SIZE]; char *buf = NULL; -#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) const struct dynamic_odt *pdodt = odt_unknown; #endif ulong ddr_freq; @@ -519,7 +519,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; -#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) /* Chip select options. */ if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { switch (pdimm[0].n_ranks) { @@ -585,7 +585,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, /* Pick chip-select local options. */ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { -#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg; popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg; popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm; @@ -655,9 +655,9 @@ unsigned int populate_memctl_options(int all_dimms_registered, * 0 for DDR1 * 1 for DDR2 */ -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) popts->dqs_config = 0; -#elif defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3) popts->dqs_config = 1; #endif @@ -672,7 +672,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, * presuming all dimms are similar * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit */ -#if defined(CONFIG_FSL_DDR1) || defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) if (pdimm[0].n_ranks != 0) { if ((pdimm[0].data_width >= 64) && \ (pdimm[0].data_width <= 72)) @@ -703,7 +703,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0; /* Choose burst length. */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) #if defined(CONFIG_E500MC) popts->otf_burst_chop_en = 0; /* on-the-fly burst chop disable */ popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */ @@ -722,7 +722,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, #endif /* Choose ddr controller address mirror mode */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) popts->mirrored_dimm = pdimm[0].mirrored_dimm; #endif @@ -785,22 +785,22 @@ unsigned int populate_memctl_options(int all_dimms_registered, * FIXME: varies depending upon number of column addresses or data * FIXME: width, was considering looking at pdimm->primary_sdram_width */ -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) popts->tfaw_window_four_activates_ps = mclk_to_picos(1); -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) /* * x4/x8; some datasheets have 35000 * x16 wide columns only? Use 50000? */ popts->tfaw_window_four_activates_ps = 37500; -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps; #endif popts->zq_en = 0; popts->wrlvl_en = 0; -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) /* * due to ddr3 dimm is fly-by topology * we suggest to enable write leveling to diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/drivers/ddr/fsl/util.c index acfe1f0..0658261 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/drivers/ddr/fsl/util.c @@ -7,10 +7,14 @@ */ #include <common.h> +#ifdef CONFIG_PPC #include <asm/fsl_law.h> +#endif #include <div64.h> -#include "ddr.h" +#include <fsl_ddr.h> +#include <fsl_immap.h> +#include <asm/io.h> /* To avoid 64-bit full-divides, we factor this here */ #define ULL_2E12 2000000000000ULL @@ -77,6 +81,7 @@ unsigned int mclk_to_picos(unsigned int mclk) return get_memory_clk_period_ps() * mclk; } +#ifdef CONFIG_PPC void __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params, unsigned int law_memctl, @@ -111,6 +116,7 @@ __attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params, unsigned int memctl_interleaved, unsigned int ctrl_num); +#endif void fsl_ddr_set_intl3r(const unsigned int granule_size) { @@ -133,7 +139,8 @@ u32 fsl_ddr_get_intl3r(void) void board_add_ram_info(int use_default) { - ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); #if defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3) u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004); @@ -146,13 +153,13 @@ void board_add_ram_info(int use_default) #if CONFIG_NUM_DDR_CONTROLLERS >= 2 if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { - ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; + ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR; sdram_cfg = in_be32(&ddr->sdram_cfg); } #endif #if CONFIG_NUM_DDR_CONTROLLERS >= 3 if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { - ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; + ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR; sdram_cfg = in_be32(&ddr->sdram_cfg); } #endif diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index d8ff9c6..c77e40a 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_NS87308) += ns87308.o obj-$(CONFIG_PDSP188x) += pdsp188x.o obj-$(CONFIG_STATUS_LED) += status_led.o obj-$(CONFIG_TWL4030_LED) += twl4030_led.o +obj-$(CONFIG_FSL_IFC) += fsl_ifc.o diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/drivers/misc/fsl_ifc.c index 64a5225..be61973 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c +++ b/drivers/misc/fsl_ifc.c @@ -6,7 +6,7 @@ */ #include <common.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> void print_ifc_regs(void) { diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 49b63af..1808a7f 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -17,7 +17,7 @@ #include <asm/io.h> #include <asm/errno.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #define FSL_IFC_V1_1_0 0x01010000 #define MAX_BANKS 4 diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index 9fa5ccb..9de327b 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -9,7 +9,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <linux/mtd/nand.h> static inline int is_blank(uchar *addr, int page_size) diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index d0fd7fc..ee5d768 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -28,6 +28,8 @@ obj-$(CONFIG_PPC_T1040) += t1040.o obj-$(CONFIG_PPC_T1042) += t1040.o obj-$(CONFIG_PPC_T1020) += t1040.o obj-$(CONFIG_PPC_T1022) += t1040.o +obj-$(CONFIG_PPC_T2080) += t2080.o +obj-$(CONFIG_PPC_T2081) += t2080.o obj-$(CONFIG_PPC_T4240) += t4240.o obj-$(CONFIG_PPC_T4160) += t4240.o obj-$(CONFIG_PPC_B4420) += b4860.o diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index cb099cd..218a5ed 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -557,8 +557,16 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) num = fm_eth->num; #ifdef CONFIG_SYS_FMAN_V3 - if (fm_eth->type == FM_ETH_10G_E) - num += 8; + if (fm_eth->type == FM_ETH_10G_E) { + /* 10GEC1/10GEC2 use mEMAC9/mEMAC10 + * 10GEC3/10GEC4 use mEMAC1/mEMAC2 + * so it needs to change the num. + */ + if (fm_eth->num >= 2) + num -= 2; + else + num += 8; + } base = ®->memac[num].fm_memac; phyregs = ®->memac[num].fm_memac_mdio; #else diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h index 3ec49a4..43de114 100644 --- a/drivers/net/fm/fm.h +++ b/drivers/net/fm/fm.h @@ -18,9 +18,11 @@ #define RX_PORT_1G_BASE 0x08 #define MAX_NUM_RX_PORT_1G CONFIG_SYS_NUM_FM1_DTSEC #define RX_PORT_10G_BASE 0x10 +#define RX_PORT_10G_BASE2 0x08 #define TX_PORT_1G_BASE 0x28 #define MAX_NUM_TX_PORT_1G CONFIG_SYS_NUM_FM1_DTSEC #define TX_PORT_10G_BASE 0x30 +#define TX_PORT_10G_BASE2 0x28 #define MIIM_TIMEOUT 0xFFFF struct fm_muram { diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index 35edd7a..cd787f4 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -64,6 +64,12 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM1_10GEC >= 2) FM_TGEC_INFO_INITIALIZER(1, 2), #endif +#if (CONFIG_SYS_NUM_FM1_10GEC >= 3) + FM_TGEC_INFO_INITIALIZER2(1, 3), +#endif +#if (CONFIG_SYS_NUM_FM1_10GEC >= 4) + FM_TGEC_INFO_INITIALIZER2(1, 4), +#endif #if (CONFIG_SYS_NUM_FM2_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(2, 1), #endif @@ -239,10 +245,14 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop) * FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the * dual-role MAC is not disabled, ditto for other dual-role MACs. */ - if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) || - ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) || - ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) || - ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) + if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) || + ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) || + ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3))) || + ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4))) || + ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) || + ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) || + ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1))) || + ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2))) #if (CONFIG_SYS_NUM_FMAN == 2) || ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) || diff --git a/drivers/net/fm/t2080.c b/drivers/net/fm/t2080.c new file mode 100644 index 0000000..b5c1e9f --- /dev/null +++ b/drivers/net/fm/t2080.c @@ -0,0 +1,91 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Shengzhou Liu <Shengzhou.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <phy.h> +#include <fm_eth.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +u32 port_to_devdisr[] = { + [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, + [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, + [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, + [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4, + [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5, + [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6, + [FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9, + [FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10, + [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1, + [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2, + [FM1_10GEC3] = FSL_CORENET_DEVDISR2_10GEC1_3, + [FM1_10GEC4] = FSL_CORENET_DEVDISR2_10GEC1_4, +}; + +static int is_device_disabled(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + + return port_to_devdisr[port] & devdisr2; +} + +void fman_disable_port(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->devdisr2, port_to_devdisr[port]); +} + +phy_interface_t fman_port_enet_if(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + + if (is_device_disabled(port)) + return PHY_INTERFACE_MODE_NONE; + + if ((port == FM1_10GEC1 || port == FM1_10GEC2 || + port == FM1_10GEC3 || port == FM1_10GEC4) && + ((is_serdes_configured(XAUI_FM1_MAC9)) || + (is_serdes_configured(XFI_FM1_MAC1)) || + (is_serdes_configured(XFI_FM1_MAC2)) || + (is_serdes_configured(XFI_FM1_MAC9)) || + (is_serdes_configured(XFI_FM1_MAC10)))) + return PHY_INTERFACE_MODE_XGMII; + + if ((port == FM1_DTSEC3) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC4) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC10) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_DTSEC10_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + case FM1_DTSEC10: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + + return PHY_INTERFACE_MODE_NONE; +} diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h b/include/common_timing_params.h index 76338d4..76338d4 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h +++ b/include/common_timing_params.h diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 268f66e..b2a5c19 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -193,7 +193,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DDR_SPD #define CONFIG_SYS_DDR_RAW_TIMING -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 036f264..499d8c2 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -80,7 +80,7 @@ #define CONFIG_SYS_MEMTEST_END 0x01ffffff /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #undef CONFIG_SYS_DDR_RAW_TIMING #undef CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 75889b3..a6601fe 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -134,7 +134,7 @@ #define CONFIG_SYS_MEMTEST_END 0x01ffffff /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS1 0x54 /* I2C access */ #define SPD_EEPROM_ADDRESS2 0x56 /* I2C access */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index bb15745..1cfb2c2 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -103,7 +103,7 @@ #define CONFIG_PANIC_HANG /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x50 diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h index f3f2136..bbfee7d 100644 --- a/include/configs/HWW1U1A.h +++ b/include/configs/HWW1U1A.h @@ -255,7 +255,7 @@ /* -------------------------------------------------------------------- */ /* FreeScale DDR2/3 SDRAM Controller */ -#define CONFIG_FSL_DDR2 /* Our SDRAM slot is DDR2 */ +#define CONFIG_SYS_FSL_DDR2 /* Our SDRAM slot is DDR2 */ #define CONFIG_DDR_ECC /* Enable ECC by default */ #define CONFIG_DDR_SPD /* Detect DDR config from SPD EEPROM */ #define CONFIG_SPD_EEPROM /* ...why 2 config variables for this? */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 3f742a2..a80a696 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -62,11 +62,11 @@ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ /* - * define CONFIG_FSL_DDR2 to use unified DDR driver + * define CONFIG_SYS_FSL_DDR2 to use unified DDR driver * undefine it to use old spd_sdram.c */ -#define CONFIG_FSL_DDR2 -#ifdef CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 +#ifdef CONFIG_SYS_FSL_DDR2 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS1 0x52 #define SPD_EEPROM_ADDRESS2 0x51 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 8197f89..9ab1bc1 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -122,7 +122,7 @@ /* DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 6689368..046b14b 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -78,7 +78,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index e24c597..eca3b53 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -51,7 +51,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 2e76df6..8132ec0 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -63,7 +63,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 9ff048a..6acd54d 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -75,7 +75,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 7f0f927..5ffdd01 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -51,7 +51,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index b7c4a60..bb9ae2d 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -75,7 +75,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index c9a1539..7406ac3 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -60,7 +60,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 341f6a8..df5572b 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -98,7 +98,7 @@ extern unsigned long get_clock_freq(void); #endif /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 9ad9402..63480ec 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -106,7 +106,7 @@ /* DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 97f5c87..41ebe31 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -92,7 +92,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD for DDR */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 8ed5050..0e666ba 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -108,7 +108,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index c1cfbd4..eab386a 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -178,7 +178,7 @@ #define CONFIG_PANIC_HANG /* do not reset board on panic */ /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 1 @@ -313,6 +313,13 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITION +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nand0=ff800000.flash" +#define MTDPARTS_DEFAULT \ + "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)" + #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_NAND \ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 1470526..262c3e5 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -177,7 +177,7 @@ /* DDR Setup */ #define CONFIG_DDR_SPD #define CONFIG_VERY_BIG_RAM -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #ifdef CONFIG_DDR_ECC #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index e49523e..7de6814 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -74,7 +74,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SYS_SDRAM_SIZE 512u /* DDR is 512M */ #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 282f5c1..b592c19 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -141,7 +141,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index 9cc219e..15d2a43 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -105,7 +105,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 8a29eaa..9d3d9b3 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -109,9 +109,9 @@ /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #ifdef CONFIG_DDR2 -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #else -#define CONFIG_FSL_DDR3 1 +#define CONFIG_SYS_FSL_DDR3 1 #endif /* ECC will be enabled based on perf_mode environment variable */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 0df6f1a..b238574 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -175,7 +175,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x52 diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index b0cd7d5..2f89008 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -17,6 +17,12 @@ #define CONFIG_MMC #define CONFIG_PCIE3 +#define CONFIG_CMD_SATA +#define CONFIG_SATA_SIL +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_LIBATA +#define CONFIG_LBA48 + #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 7c6bec8..43a5778 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -170,7 +170,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h index 620387f..7931231 100644 --- a/include/configs/T1040RDB.h +++ b/include/configs/T1040RDB.h @@ -156,7 +156,7 @@ #define CONFIG_DDR_SPD #define CONFIG_SYS_DDR_RAW_TIMING -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h index 4b023f9..eff08e3 100644 --- a/include/configs/T1042RDB_PI.h +++ b/include/configs/T1042RDB_PI.h @@ -156,7 +156,7 @@ #define CONFIG_DDR_SPD #define CONFIG_SYS_DDR_RAW_TIMING -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x51 diff --git a/include/configs/T2080QDS.h b/include/configs/T2080QDS.h new file mode 100644 index 0000000..ad09816 --- /dev/null +++ b/include/configs/T2080QDS.h @@ -0,0 +1,805 @@ +/* + * Copyright 2011-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * T2080 QDS board configuration file + */ + +#ifndef __T2080QDS_H +#define __T2080QDS_H + +#define CONFIG_T2080QDS +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ +#define CONFIG_MMC +#define CONFIG_SPI_FLASH +#define CONFIG_USB_EHCI +#define CONFIG_FSL_SATA_V2 +#define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */ +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + +/* High Level Configuration Options */ +#define CONFIG_PHYS_64BIT +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_MP /* support multiple processors */ +#define CONFIG_ENABLE_36BIT_PHYS + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP 1 +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg +#endif + +#define CONFIG_SRIO_PCIE_BOOT_MASTER +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#ifdef CONFIG_SYS_NO_FLASH +#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_ENV_IS_NOWHERE +#endif +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1105) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_DDR_SPD +#define CONFIG_SYS_FSL_DDR3 +#define CONFIG_FSL_DDR_INTERACTIVE +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 +#define CTRL_INTLV_PREFERED cacheline + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x83 +#define QIXIS_RST_FORCE_MEM 0x1 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */\ + | CSOR_NAND_SPRZ_64 /* Spare size = 64 */\ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* + * I2C + */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 +#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 +#define CONFIG_SYS_FSL_I2C_SPEED 100000 +#define CONFIG_SYS_FSL_I2C2_SPEED 100000 +#define CONFIG_SYS_FSL_I2C3_SPEED 100000 +#define CONFIG_SYS_FSL_I2C4_SPEED 100000 +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */ +#define I2C_MUX_PCA_ADDR_SEC2 0x76 /* I2C bus multiplexer,secondary 2 */ +#define I2C_MUX_CH_DEFAULT 0x8 + + +/* + * RapidIO + */ +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull +#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif + +/* + * eSPI - Enhanced SPI + */ +#ifdef CONFIG_SPI_FLASH +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 +#endif + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_PCIE4 /* PCIE controler 4 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xb0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc30000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 4, Base address 203000 */ +#define CONFIG_SYS_PCIE4_MEM_VIRT 0xc0000000 +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc40000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ + +#ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata LSZ ADD */ +#define CONFIG_NET_MULTI +#define CONFIG_E1000 +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 18 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 18 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN /* RMan */ +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#define CONFIG_PHY_TERANETICS +#define RGMII_PHY1_ADDR 0x1 +#define RGMII_PHY2_ADDR 0x2 +#define FM1_10GEC1_PHY_ADDR 0x3 +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC3" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * SATA + */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* + * USB + */ +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB +#endif + +/* + * SDHC + */ +#ifdef CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_BDI + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t2080qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t2080qds/t2080qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +/* + * For emulation this causes u-boot to jump to the start of the + * proof point app code automatically + */ +#define CONFIG_PROOF_POINTS \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x29000000 - - -;" \ + "cpu 2 release 0x29000000 - - -;" \ + "cpu 3 release 0x29000000 - - -;" \ + "cpu 4 release 0x29000000 - - -;" \ + "cpu 5 release 0x29000000 - - -;" \ + "cpu 6 release 0x29000000 - - -;" \ + "cpu 7 release 0x29000000 - - -;" \ + "go 0x29000000" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_ALU \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x01000000 - - -;" \ + "cpu 2 release 0x01000000 - - -;" \ + "cpu 3 release 0x01000000 - - -;" \ + "cpu 4 release 0x01000000 - - -;" \ + "cpu 5 release 0x01000000 - - -;" \ + "cpu 6 release 0x01000000 - - -;" \ + "cpu 7 release 0x01000000 - - -;" \ + "go 0x01000000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#undef CONFIG_CMD_USB +#endif + +#endif /* __T2080QDS_H */ diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 413f086..46d4f98 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -138,7 +138,7 @@ #define CONFIG_SYS_SDRAM_SIZE 1024 #define CONFIG_VERY_BIG_RAM -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 562caa5..665295c 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -173,7 +173,7 @@ #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS1 0x51 diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 2d5320b..7700b38 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -111,7 +111,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h index 6d0d392..ec09e15 100644 --- a/include/configs/mpq101.h +++ b/include/configs/mpq101.h @@ -52,7 +52,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 91a6782..57ed019 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -325,7 +325,7 @@ #endif /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 1 diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 76189e1..9837100 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -89,7 +89,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M #define CONFIG_CHIP_SELECTS_PER_CTRL 1 diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 6d97060..bdb8eb5 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -102,7 +102,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #undef CONFIG_DDR_ECC /* only for ECC DDR module */ /* diff --git a/include/configs/socrates.h b/include/configs/socrates.h index b6fbe23..0e6b864 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -80,7 +80,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 9b3f0cc..ee1f1f3 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -98,7 +98,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 805814f..63dd767 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -112,7 +112,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 3f54f14..d9b0ed0 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -87,7 +87,7 @@ #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 /* diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 4738c23..88d7f88 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -40,7 +40,7 @@ /* * DDR config */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD #define CONFIG_MEM_INIT_VALUE 0xdeadbeef diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index 3342880..f39d6f9 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -39,7 +39,7 @@ /* * DDR config */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 9da845d..e1bdf90 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -49,7 +49,7 @@ /* * DDR config */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 4137cc9..2328c7a 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -49,7 +49,7 @@ /* * DDR config */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD #define CONFIG_MEM_INIT_VALUE 0xdeadbeef diff --git a/include/fm_eth.h b/include/fm_eth.h index 5a4fb70..98edfcf 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -22,6 +22,8 @@ enum fm_port { FM1_DTSEC10, FM1_10GEC1, FM1_10GEC2, + FM1_10GEC3, + FM1_10GEC4, FM2_DTSEC1, FM2_DTSEC2, FM2_DTSEC3, @@ -85,6 +87,22 @@ enum fm_eth_type { .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ offsetof(struct ccsr_fman, memac[n-1+8]),\ } + +#if (CONFIG_SYS_NUM_FM1_10GEC >= 3) +#define FM_TGEC_INFO_INITIALIZER2(idx, n) \ +{ \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + .index = idx, \ + .num = n - 1, \ + .type = FM_ETH_10G_E, \ + .port = FM##idx##_10GEC##n, \ + .rx_port_id = RX_PORT_10G_BASE2 + n - 3, \ + .tx_port_id = TX_PORT_10G_BASE2 + n - 3, \ + .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ + offsetof(struct ccsr_fman, memac[n-1-2]),\ +} +#endif + #else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ { \ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/include/fsl_ddr.h index e3b414e..e03f9db 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/include/fsl_ddr.h @@ -9,10 +9,10 @@ #ifndef FSL_DDR_MAIN_H #define FSL_DDR_MAIN_H -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> -#include "common_timing_params.h" +#include <common_timing_params.h> #if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM) /* diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/include/fsl_ddr_dimm_params.h index 99a72bc..99a72bc 100644 --- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h +++ b/include/fsl_ddr_dimm_params.h diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index 2c3c514..16cccc7 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -36,25 +36,25 @@ #define DDR2_RTT_150_OHM 2 #define DDR2_RTT_50_OHM 3 -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1) typedef ddr1_spd_eeprom_t generic_spd_eeprom_t; #ifndef CONFIG_FSL_SDRAM_TYPE #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR1 #endif -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) typedef ddr2_spd_eeprom_t generic_spd_eeprom_t; #ifndef CONFIG_FSL_SDRAM_TYPE #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2 #endif -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #ifndef CONFIG_FSL_SDRAM_TYPE #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR3 #endif -#endif /* #if defined(CONFIG_FSL_DDR1) */ +#endif /* #if defined(CONFIG_SYS_FSL_DDR1) */ #define FSL_DDR_ODT_NEVER 0x0 #define FSL_DDR_ODT_CS 0x1 diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/include/fsl_ifc.h index 182b1a6..be6c107 100644 --- a/arch/powerpc/include/asm/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -5,8 +5,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __ASM_PPC_FSL_IFC_H -#define __ASM_PPC_FSL_IFC_H +#ifndef __FSL_IFC_H +#define __FSL_IFC_H #ifdef CONFIG_FSL_IFC #include <config.h> @@ -985,4 +985,4 @@ struct fsl_ifc { #endif /* CONFIG_FSL_IFC */ #endif /* __ASSEMBLY__ */ -#endif /* __ASM_PPC_FSL_IFC_H */ +#endif /* __FSL_IFC_H */ diff --git a/include/fsl_immap.h b/include/fsl_immap.h new file mode 100644 index 0000000..00902ca --- /dev/null +++ b/include/fsl_immap.h @@ -0,0 +1,112 @@ +/* + * Common internal memory map for some Freescale SoCs + * + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_IMMAP_H +#define __FSL_IMMAP_H +/* + * DDR memory controller registers + * This structure works for mpc83xx (DDR2 and DDR3), mpc85xx, mpc86xx. + */ +struct ccsr_ddr { + u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ + u8 res_04[4]; + u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ + u8 res_0c[4]; + u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ + u8 res_14[4]; + u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ + u8 res_1c[100]; + u32 cs0_config; /* Chip Select Configuration */ + u32 cs1_config; /* Chip Select Configuration */ + u32 cs2_config; /* Chip Select Configuration */ + u32 cs3_config; /* Chip Select Configuration */ + u8 res_90[48]; + u32 cs0_config_2; /* Chip Select Configuration 2 */ + u32 cs1_config_2; /* Chip Select Configuration 2 */ + u32 cs2_config_2; /* Chip Select Configuration 2 */ + u32 cs3_config_2; /* Chip Select Configuration 2 */ + u8 res_d0[48]; + u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ + u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ + u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ + u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ + u32 sdram_cfg; /* SDRAM Control Configuration */ + u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ + u32 sdram_mode; /* SDRAM Mode Configuration */ + u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ + u32 sdram_md_cntl; /* SDRAM Mode Control */ + u32 sdram_interval; /* SDRAM Interval Configuration */ + u32 sdram_data_init; /* SDRAM Data initialization */ + u8 res_12c[4]; + u32 sdram_clk_cntl; /* SDRAM Clock Control */ + u8 res_134[20]; + u32 init_addr; /* training init addr */ + u32 init_ext_addr; /* training init extended addr */ + u8 res_150[16]; + u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ + u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ + u8 reg_168[8]; + u32 ddr_zq_cntl; /* ZQ calibration control*/ + u32 ddr_wrlvl_cntl; /* write leveling control*/ + u8 reg_178[4]; + u32 ddr_sr_cntr; /* self refresh counter */ + u32 ddr_sdram_rcw_1; /* Control Words 1 */ + u32 ddr_sdram_rcw_2; /* Control Words 2 */ + u8 reg_188[8]; + u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ + u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ + u8 res_198[104]; + u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ + u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ + u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ + u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ + u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ + u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ + u8 res_218[0x908]; + u32 ddr_dsr1; /* Debug Status 1 */ + u32 ddr_dsr2; /* Debug Status 2 */ + u32 ddr_cdr1; /* Control Driver 1 */ + u32 ddr_cdr2; /* Control Driver 2 */ + u8 res_b30[200]; + u32 ip_rev1; /* IP Block Revision 1 */ + u32 ip_rev2; /* IP Block Revision 2 */ + u32 eor; /* Enhanced Optimization Register */ + u8 res_c04[252]; + u32 mtcr; /* Memory Test Control Register */ + u8 res_d04[28]; + u32 mtp1; /* Memory Test Pattern 1 */ + u32 mtp2; /* Memory Test Pattern 2 */ + u32 mtp3; /* Memory Test Pattern 3 */ + u32 mtp4; /* Memory Test Pattern 4 */ + u32 mtp5; /* Memory Test Pattern 5 */ + u32 mtp6; /* Memory Test Pattern 6 */ + u32 mtp7; /* Memory Test Pattern 7 */ + u32 mtp8; /* Memory Test Pattern 8 */ + u32 mtp9; /* Memory Test Pattern 9 */ + u32 mtp10; /* Memory Test Pattern 10 */ + u8 res_d48[184]; + u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ + u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ + u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ + u8 res_e0c[20]; + u32 capture_data_hi; /* Data Path Read Capture High */ + u32 capture_data_lo; /* Data Path Read Capture Low */ + u32 capture_ecc; /* Data Path Read Capture ECC */ + u8 res_e2c[20]; + u32 err_detect; /* Error Detect */ + u32 err_disable; /* Error Disable */ + u32 err_int_en; + u32 capture_attributes; /* Error Attrs Capture */ + u32 capture_address; /* Error Addr Capture */ + u32 capture_ext_address; /* Error Extended Addr Capture */ + u32 err_sbe; /* Single-Bit ECC Error Management */ + u8 res_e5c[164]; + u32 debug[32]; /* debug_1 to debug_32 */ + u8 res_f80[128]; +}; +#endif /* __FSL_IMMAP_H */ diff --git a/include/phy.h b/include/phy.h index d3001f1..1f22fa1 100644 --- a/include/phy.h +++ b/include/phy.h @@ -163,6 +163,14 @@ struct phy_device { u32 flags; }; +struct fixed_link { + int phy_id; + int duplex; + int link_speed; + int pause; + int asym_pause; +}; + static inline int phy_read(struct phy_device *phydev, int devad, int regnum) { struct mii_dev *bus = phydev->bus; diff --git a/nand_spl/board/freescale/mpc8569mds/nand_boot.c b/nand_spl/board/freescale/mpc8569mds/nand_boot.c index 716b737..ce7f619 100644 --- a/nand_spl/board/freescale/mpc8569mds/nand_boot.c +++ b/nand_spl/board/freescale/mpc8569mds/nand_boot.c @@ -10,7 +10,7 @@ #include <nand.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_law.h> #define SYSCLK_66 66666666 diff --git a/nand_spl/board/freescale/p1023rds/nand_boot.c b/nand_spl/board/freescale/p1023rds/nand_boot.c index 9468000..d9afa6d 100644 --- a/nand_spl/board/freescale/p1023rds/nand_boot.c +++ b/nand_spl/board/freescale/p1023rds/nand_boot.c @@ -10,7 +10,7 @@ #include <asm/io.h> #include <nand.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; @@ -18,7 +18,8 @@ DECLARE_GLOBAL_DATA_PTR; /* Fixed sdram init -- doesn't use serial presence detect. */ void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); diff --git a/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c b/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c index 3244c8f..f7e8438 100644 --- a/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c +++ b/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c @@ -10,7 +10,7 @@ #include <nand.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_law.h> #define SYSCLK_MASK 0x00200000 diff --git a/spl/Makefile b/spl/Makefile index 29d7818..2a787af 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -70,6 +70,7 @@ LIBS-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ LIBS-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/ LIBS-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/ LIBS-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/ +LIBS-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/ LIBS-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/ LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/ LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/ |