diff options
author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2014-06-20 04:54:56 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-07-07 23:43:02 (GMT) |
commit | b8c1438a7aba4da91ef6a7b94c13148087656989 (patch) | |
tree | a18971cecf8535985e94bd88d5daa0be7c867a49 | |
parent | 03f9d7d1749fddf147823549e6965f6fb13faad6 (diff) | |
download | u-boot-fsl-qoriq-b8c1438a7aba4da91ef6a7b94c13148087656989.tar.xz |
mpc8xx: remove v37 board support
This board is old enough and has no maintainer.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
-rw-r--r-- | board/v37/Makefile | 8 | ||||
-rw-r--r-- | board/v37/flash.c | 543 | ||||
-rw-r--r-- | board/v37/u-boot.lds | 82 | ||||
-rw-r--r-- | board/v37/v37.c | 202 | ||||
-rw-r--r-- | boards.cfg | 1 | ||||
-rw-r--r-- | doc/README.scrapyard | 1 | ||||
-rw-r--r-- | drivers/video/mpc8xx_lcd.c | 8 | ||||
-rw-r--r-- | include/commproc.h | 23 | ||||
-rw-r--r-- | include/configs/v37.h | 375 |
9 files changed, 2 insertions, 1241 deletions
diff --git a/board/v37/Makefile b/board/v37/Makefile deleted file mode 100644 index 2df4b82..0000000 --- a/board/v37/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = v37.o flash.o diff --git a/board/v37/flash.c b/board/v37/flash.c deleted file mode 100644 index 5b34af2..0000000 --- a/board/v37/flash.c +++ /dev/null @@ -1,543 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - * - * Some of flash control words are modified. (from 2x16bit device - * to 4x8bit device) - * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices - * are not tested. - * - * (?) Does an RPXLite board which - * does not use AM29LV800 flash memory exist ? - * I don't know... - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size ( short manu, short dev_id, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info, int two_chips); -static void flash_get_id_word( void *ptr, short *ptr_manuf, short *ptr_dev_id); -static void flash_get_id_long( void *ptr, short *ptr_manuf, short *ptr_dev_id); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - short manu, dev_id; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Do sizing to get full correct info */ - - flash_get_id_word((void*)CONFIG_SYS_FLASH_BASE0,&manu,&dev_id); - - size_b0 = flash_get_size(manu, dev_id, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE0, &flash_info[0],0); - - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (0 - size_b0); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE0 - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - flash_get_id_long((void*)CONFIG_SYS_FLASH_BASE1,&manu,&dev_id); - - size_b1 = 2 * flash_get_size(manu, dev_id, &flash_info[1]); - - flash_get_offsets(CONFIG_SYS_FLASH_BASE1, &flash_info[1],1); - - memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (0 - size_b1); - - flash_info[0].size = size_b0; - flash_info[1].size = size_b1; - - return (size_b0+size_b1); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info, int two_chips) -{ - int i, addr_shift; - vu_short *addr = (vu_short*)base; - - addr[0x555] = 0x00AA ; - addr[0xAAA] = 0x0055 ; - addr[0x555] = 0x0090 ; - - addr_shift = (two_chips ? 2 : 1 ); - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + (0x00000000<<addr_shift); - info->start[1] = base + (0x00002000<<addr_shift); - info->start[2] = base + (0x00003000<<addr_shift); - info->start[3] = base + (0x00004000<<addr_shift); - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + ((i-3) * (0x00008000<<addr_shift)) ; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - (0x00002000<<addr_shift); - info->start[i--] = base + info->size - (0x00003000<<addr_shift); - info->start[i--] = base + info->size - (0x00004000<<addr_shift); - for (; i >= 0; i--) { - info->start[i] = base + i * (0x00008000<<addr_shift); - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (vu_short *)(info->start[i]); - info->protect[i] = addr[1<<addr_shift] & 1 ; - } - - addr = (vu_short *)info->start[0]; - *addr = 0xF0F0; /* reset bank */ -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_TOSH: printf ("TOSHIBA "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static void flash_get_id_word( void *ptr, short *ptr_manuf, short *ptr_dev_id) -{ - vu_short *addr = (vu_short*)ptr; - - addr[0x555] = 0x00AA ; - addr[0xAAA] = 0x0055 ; - addr[0x555] = 0x0090 ; - - *ptr_manuf = addr[0]; - *ptr_dev_id = addr[1]; - - addr[0] = 0xf0f0; /* return to normal */ -} - -static void flash_get_id_long( void *ptr, short *ptr_manuf, short *ptr_dev_id) -{ - vu_short *addr = (vu_short*)ptr; - vu_short *addr1, *addr2, *addr3; - - addr1 = (vu_short*) ( ((int)ptr) + (0x5555<<2) ); - addr2 = (vu_short*) ( ((int)ptr) + (0x2AAA<<2) ); - addr3 = (vu_short*) ( ((int)ptr) + (0x5555<<2) ); - - *addr1 = 0xAAAA; - *addr2 = 0x5555; - *addr3 = 0x9090; - - *ptr_manuf = addr[0]; - *ptr_dev_id = addr[2]; - - addr[0] = 0xf0f0; /* return to normal */ -} - -static ulong flash_get_size ( short manu, short dev_id, flash_info_t *info) -{ - switch (manu) { - case ((short)AMD_MANUFACT): - info->flash_id = FLASH_MAN_AMD; - break; - case ((short)FUJ_MANUFACT): - info->flash_id = FLASH_MAN_FUJ; - break; - case ((short)TOSH_MANUFACT): - info->flash_id = FLASH_MAN_TOSH; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - - switch (dev_id) { - case ((short)TOSH_ID_FVT160): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 1 MB */ - - case ((short)TOSH_ID_FVB160): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 1 MB */ - - case ((short)AMD_ID_LV400T): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case ((short)AMD_ID_LV400B): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case ((short)AMD_ID_LV800T): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case ((short)AMD_ID_LV800B): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00400000; /*%%% Size doubled by yooth */ - break; /* => 4 MB */ - - case ((short)AMD_ID_LV160T): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 4 MB */ - - case ((short)AMD_ID_LV160B): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 4 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - return(info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_short *addr = (vu_short*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x555] = (vu_short)0xAAAAAAAA; - addr[0xAAA] = (vu_short)0x55555555; - addr[0x555] = (vu_short)0x80808080; - addr[0x555] = (vu_short)0xAAAAAAAA; - addr[0xAAA] = (vu_short)0x55555555; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_short *)(info->start[sect]) ; - addr[0] = (vu_short)0x30303030 ; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_short *)(info->start[l_sect]); - while ((addr[0] & 0x8080) != 0x8080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_short *)info->start[0]; - addr[0] = (vu_short)0xF0F0F0F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_short *addr = (vu_short *)(info->start[0]); - vu_short sdata; - - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - - /* First write upper 16 bits */ - sdata = (short)(data>>16); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x555] = 0xAAAA; - addr[0xAAA] = 0x5555; - addr[0x555] = 0xA0A0; - - *((vu_short *)dest) = sdata; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_short *)dest) & 0x8080) != (sdata & 0x8080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - - /* Now write lower 16 bits */ - sdata = (short)(data&0xffff); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x555] = 0xAAAA; - addr[0xAAA] = 0x5555; - addr[0x555] = 0xA0A0; - - *((vu_short *)dest + 1) = sdata; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_short *)dest + 1) & 0x8080) != (sdata & 0x8080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds deleted file mode 100644 index 6e19b3f..0000000 --- a/board/v37/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/v37/v37.c b/board/v37/v37.c deleted file mode 100644 index 438117e..0000000 --- a/board/v37/v37.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - * - * DRAM related UPMA register values are modified. - * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS - */ - -#include <common.h> -#include "mpc8xx.h" - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (void); - -/* ------------------------------------------------------------------------- */ - -#define MBYTE (1024*1024) -#define DRAM_DELAY 0x00000379 /* DRAM delay count */ -#define _NOT_USED_ 0xFFFFCC25 - -const uint sdram_table[] = -{ - /* single read. (offset 0 in upm RAM) */ - 0x1F07D004, 0xEEAEE004, 0x11ADD004, 0xEFBBA000, - 0x1FF75447, 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, - - /* burst read. (Offset 8 in upm RAM) */ - 0x1F07D004, 0xEEAEE004, 0x00ADC004, 0x00AFC000, - 0x00AFC000, 0x01AFC000, 0x0FBB8000, 0x1FF75447, - 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, - - /* single write. (Offset 0x18 in upm RAM) */ - 0x1F27D004, 0xEEAEA000, 0x01B90004, 0x1FF75447, - 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, - - /* burst write. (Offset 0x20 in upm RAM) */ - 0x1F07D004, 0xEEAEA000, 0x00AD4000, 0x00AFC000, - 0x00AFC000, 0x01BB8004, 0x1FF75447, 0xFFFFFFFF, - 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, - - /* Refresh cycle, offset 0x30 */ - 0x1FF5DC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, - 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, - - /* Exception, 0ffset 0x3C */ - 0x7FFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, -}; -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - * Return 1 for now. - * - */ - -int checkboard (void) -{ - printf("Marel V37\n") ; - return (0) ; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long temp; - volatile int delay_cnt; - long int ramsize; - - ramsize = dram_size(); - - /* Refresh clock prescalar */ - memctl->memc_mptpr = 0x400 ; - - if( ramsize == 32*MBYTE ) - temp = 0xd0904110; - else /* 16MB */ - temp = 0xd0802110; - - memctl->memc_mbmr = temp; - - upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - /* Map controller banks 2 to the SDRAM bank */ - memctl->memc_or2 = 0xA00 | (0 - ramsize); - memctl->memc_br2 = 0xC1; - - memctl->memc_mbmr = temp | 0x08; - memctl->memc_mcr = 0x80804130; - - delay_cnt = 0; - while( delay_cnt++ < DRAM_DELAY ) - ; - - /* Run MRS command in location 5-8 of UPMB */ - - memctl->memc_mbmr = temp | 0x04; - memctl->memc_mar = 0x88; - - memctl->memc_mcr = 0x80804105; - - delay_cnt = 0; - while( delay_cnt++ < DRAM_DELAY ) - ; - -#ifdef CONFIG_CAN_DRIVER - /* Initialize OR3 / BR3 */ - memctl->memc_or3 = CONFIG_SYS_OR3_CAN; - memctl->memc_br3 = CONFIG_SYS_BR3_CAN; - - /* Initialize MBMR */ - memctl->memc_mamr = MAMR_GPL_A4DIS; /* GPL_A4 ouput line Disable */ - - /* Initialize UPMB for CAN: single read */ - memctl->memc_mdr = 0xFFFFC004; - memctl->memc_mcr = 0x0100 | UPMA; - - memctl->memc_mdr = 0x0FFFD004; - memctl->memc_mcr = 0x0101 | UPMA; - - memctl->memc_mdr = 0x0FFFC000; - memctl->memc_mcr = 0x0102 | UPMA; - - memctl->memc_mdr = 0x3FFFC004; - memctl->memc_mcr = 0x0103 | UPMA; - - memctl->memc_mdr = 0xFFFFDC05; - memctl->memc_mcr = 0x0104 | UPMA; - - /* Initialize UPMB for CAN: single write */ - memctl->memc_mdr = 0xFFFCC004; - memctl->memc_mcr = 0x0118 | UPMA; - - memctl->memc_mdr = 0xCFFCD004; - memctl->memc_mcr = 0x0119 | UPMA; - - memctl->memc_mdr = 0x0FFCC000; - memctl->memc_mcr = 0x011A | UPMA; - - memctl->memc_mdr = 0x7FFCC004; - memctl->memc_mcr = 0x011B | UPMA; - - memctl->memc_mdr = 0xFFFDCC05; - memctl->memc_mcr = 0x011C | UPMA; -#endif /* CONFIG_CAN_DRIVER */ - - return (dram_size()); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Find size of RAM from configuration pins. - * The input pins that contain the memory size are also the debug port - * pins. Normally they are configured as debug port pins. To be able - * to read the memory configuration, we must deactivate the debug port - * and enable the pcmcia input pins. Then return the register to - * previous state. - */ - -static long int dram_size () -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile sysconf8xx_t *siu = &immap->im_siu_conf; - volatile pcmconf8xx_t *pcm = &immap->im_pcmcia; - long int i, memory=1; - unsigned long siu_mcr; - - siu_mcr = siu->sc_siumcr; - siu->sc_siumcr = siu_mcr & 0xFF9FFFFF; - for(i=0; i<10; i++) i = i; - - memory = (pcm->pcmc_pipr>>12) & 0x3; - - siu->sc_siumcr = siu_mcr; - - switch( memory ) - { - case 1: - return( 32*MBYTE ); - case 2: - return( 64*MBYTE ); - default: - break; - } - return( 16*MBYTE ); -} @@ -979,7 +979,6 @@ Active powerpc mpc8xx - - - Active powerpc mpc8xx - - - lwmon - Wolfgang Denk <wd@denx.de> Active powerpc mpc8xx - - - RRvision - Wolfgang Denk <wd@denx.de> Active powerpc mpc8xx - - - spc1920 - - -Active powerpc mpc8xx - - - v37 - - Active powerpc mpc8xx - - cogent cogent_mpc8xx - Murray Jensen <Murray.Jensen@csiro.au> Active powerpc mpc8xx - - esteem192e ESTEEM192E - Conn Clark <clark@esteem.com> Active powerpc mpc8xx - - icu862 ICU862 - Wolfgang Denk <wd@denx.de> diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 3d2e465..d8678af 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +v37 powerpc mpc8xx - - fads powerpc mpc8xx - - netphone powerpc mpc8xx - - netta2 powerpc mpc8xx - - diff --git a/drivers/video/mpc8xx_lcd.c b/drivers/video/mpc8xx_lcd.c index eafeff7..2bc3ceb 100644 --- a/drivers/video/mpc8xx_lcd.c +++ b/drivers/video/mpc8xx_lcd.c @@ -34,7 +34,7 @@ #define CONFIG_LCD_INFO /* Display Logo, (C) and system info */ #endif -#if defined(CONFIG_V37) || defined(CONFIG_EDT32F10) +#if defined(CONFIG_EDT32F10) #undef CONFIG_LCD_LOGO #undef CONFIG_LCD_INFO #endif @@ -413,12 +413,6 @@ void lcd_enable (void) immr->im_siu_conf.sc_sdcr |= (1 << (31 - 25)); /* LAM = 1 */ lcdp->lcd_lccr |= LCCR_PON; -#ifdef CONFIG_V37 - /* Turn on display backlight */ - immr->im_cpm.cp_pbpar |= 0x00008000; - immr->im_cpm.cp_pbdir |= 0x00008000; -#endif - #if defined(CONFIG_LWMON) { uchar c = pic_read (0x60); #if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CONFIG_SYS_POST_SYSMON) diff --git a/include/commproc.h b/include/commproc.h index 48b761f..52ac4ca 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -1023,29 +1023,6 @@ typedef struct scc_enet { # endif /* CONFIG_FEC_ENET */ #endif /* CONFIG_TQM855L/M, TQM860L/M, TQM862L/M */ -/*** V37 **********************************************************/ - -#ifdef CONFIG_V37 -/* This ENET stuff is for the MPC823 with ethernet on SCC2. Some of - * this may be unique to the Marel V37 configuration. - * Note TENA is on Port B. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0400) -#define PA_ENET_RCLK ((ushort)0x0200) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002e00) -#endif /* CONFIG_V37 */ - - /*********************************************************************/ /* SCC Event register as used by Ethernet. diff --git a/include/configs/v37.h b/include/configs/v37.h deleted file mode 100644 index 0d01fe2..0000000 --- a/include/configs/v37.h +++ /dev/null @@ -1,375 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_V37 1 /* ...on a Marel V37 board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_LCD -#define CONFIG_MPC8XX_LCD -#define CONFIG_SHARP_LQ084V1DG21 -#undef CONFIG_LCD_LOGO - -/*----------------------------------------------------------------------------- - * I2C Configuration - *----------------------------------------------------------------------------- - */ -#define CONFIG_I2C 1 -#define CONFIG_SYS_I2C_SLAVE 0x2 - -#define CONFIG_8xx_CONS_SMC1 1 -#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */ -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate = 115kbps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs console=tty0 " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_DATE - - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor1=v37-1" -#define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)" -*/ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE0 0x40000000 -#define CONFIG_SYS_FLASH_BASE1 0x60000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH_BASE1 - -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_ADDR 0x80000000/* Address of Environment */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -#define CONFIG_ENV_OFFSET 0 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR 0xFFFFFF88 -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_FRC | SIUMCR_GB5E) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) -/* -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) -*/ - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR ( (1524 << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TMIST | PLPRCR_TEXPS ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */ - -#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ - -#define CONFIG_SYS_OR_TIMING_FLASH 0xF56 - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V) - -#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V) - -/* - * BR1 and OR1 (Battery backed SRAM) - */ -#define CONFIG_SYS_BR1_PRELIM 0x80000401 -#define CONFIG_SYS_OR1_PRELIM 0xFFC00736 - -/* - * BR2 and OR2 (SDRAM) - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB */ - -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* Marel V37 mem setting */ - -#define CONFIG_SYS_BR3_CAN 0xC0000401 -#define CONFIG_SYS_OR3_CAN 0xFFFF0724 - -/* -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910 -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 -#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970 -*/ - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV16 - -/* - * MAMR settings for SDRAM - */ - -/* 10 column SDRAM */ -#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 | \ - MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X) - -#endif /* __CONFIG_H */ |