arm: exynos: i2c: Convert exynos boards to use DM_I2C

Three boards are still not converting to use DM_I2C. They are also using
the old PMIC framework. Rather than removing them, add #ifdefs to allow
them to continue to build. This will give the maintainers a little more
time to decide whether to convert them or not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>

9 files changed, 54 insertions, 94 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cead040..f011026 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -406,6 +406,7 @@ config TARGET_BCMNSP
 config ARCH_EXYNOS
 	bool "Samsung EXYNOS"
 	select DM
+	select DM_I2C
 	select DM_SPI_FLASH
 	select DM_SERIAL
 	select DM_SPI
diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index 77d0a4e..203136f 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -101,6 +101,7 @@ void set_board_info(void)
 #ifdef CONFIG_LCD_MENU
 static int power_key_pressed(u32 reg)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	struct pmic *pmic;
 	u32 status;
 	u32 mask;
@@ -123,6 +124,9 @@ static int power_key_pressed(u32 reg)
 		return 0;
 
 	return !!(status & mask);
+#else
+	return 0;
+#endif
 }
 
 static int key_pressed(int key)
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 66a54d4..7200c2e 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -53,6 +53,7 @@ int exynos_init(void)
 
 void i2c_init_board(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int err;
 
 	/* I2C_5 -> PMIC */
@@ -67,8 +68,10 @@ void i2c_init_board(void)
 	gpio_request(EXYNOS4_GPIO_Y41, "i2c_data");
 	gpio_direction_output(EXYNOS4_GPIO_Y40, 1);
 	gpio_direction_output(EXYNOS4_GPIO_Y41, 1);
+#endif
 }
 
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 static void trats_low_power_mode(void)
 {
 	struct exynos4_clock *clk =
@@ -273,11 +276,14 @@ static int pmic_init_max8997(void)
 		puts("MAX8997 PMIC setting error!\n");
 		return -1;
 	}
+
 	return 0;
 }
+#endif
 
 int exynos_power_init(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int chrg, ret;
 	struct power_battery *pb;
 	struct pmic *p_fg, *p_chrg, *p_muic, *p_bat;
@@ -341,6 +347,7 @@ int exynos_power_init(void)
 
 	if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
 		puts("CHARGE Battery !\n");
+#endif
 
 	return 0;
 }
@@ -384,6 +391,7 @@ static void check_hw_revision(void)
 #ifdef CONFIG_USB_GADGET
 static int s5pc210_phy_control(int on)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int ret = 0;
 	u32 val = 0;
 	struct pmic *p = pmic_get("MAX8997_PMIC");
@@ -415,6 +423,7 @@ static int s5pc210_phy_control(int on)
 		puts("MAX8997 LDO setting error!\n");
 		return -1;
 	}
+#endif
 
 	return 0;
 }
@@ -435,11 +444,16 @@ int board_usb_init(int index, enum usb_init_type init)
 
 int g_dnl_board_usb_cable_connected(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	struct pmic *muic = pmic_get("MAX8997_MUIC");
 	if (!muic)
 		return 0;
 
 	return !!muic->chrg->chrg_type(muic);
+#else
+	return false;
+#endif
+
 }
 #endif
 
@@ -552,6 +566,7 @@ void exynos_reset_lcd(void)
 
 int lcd_power(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int ret = 0;
 	struct pmic *p = pmic_get("MAX8997_PMIC");
 	if (!p)
@@ -569,12 +584,13 @@ int lcd_power(void)
 		puts("MAX8997 LDO setting error!\n");
 		return -1;
 	}
-
+#endif
 	return 0;
 }
 
 int mipi_power(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int ret = 0;
 	struct pmic *p = pmic_get("MAX8997_PMIC");
 	if (!p)
@@ -592,7 +608,7 @@ int mipi_power(void)
 		puts("MAX8997 LDO setting error!\n");
 		return -1;
 	}
-
+#endif
 	return 0;
 }
 
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index 7b28ae8..150503e 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -151,8 +151,6 @@ int exynos_early_init_f(void)
 	return 0;
 }
 
-static int pmic_init_max77686(void);
-
 int exynos_init(void)
 {
 	struct exynos4_power *pwr =
@@ -176,6 +174,7 @@ int exynos_init(void)
 
 int exynos_power_init(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int chrg;
 	struct power_battery *pb;
 	struct pmic *p_chrg, *p_muic, *p_fg, *p_bat;
@@ -236,13 +235,14 @@ int exynos_power_init(void)
 
 	if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
 		puts("CHARGE Battery !\n");
-
+#endif
 	return 0;
 }
 
 #ifdef CONFIG_USB_GADGET
 static int s5pc210_phy_control(int on)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int ret = 0;
 	unsigned int val;
 	struct pmic *p, *p_pmic, *p_muic;
@@ -299,7 +299,7 @@ static int s5pc210_phy_control(int on)
 
 	if (ret)
 		return -1;
-
+#endif
 	return 0;
 }
 
@@ -319,14 +319,19 @@ int board_usb_init(int index, enum usb_init_type init)
 
 int g_dnl_board_usb_cable_connected(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	struct pmic *muic = pmic_get("MAX77693_MUIC");
 	if (!muic)
 		return 0;
 
 	return !!muic->chrg->chrg_type(muic);
+#else
+	return false;
+#endif
 }
 #endif
 
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 static int pmic_init_max77686(void)
 {
 	struct pmic *p = pmic_get("MAX77686_PMIC");
@@ -379,6 +384,7 @@ static int pmic_init_max77686(void)
 
 	return 0;
 }
+#endif
 
 /*
  * LCD
@@ -387,18 +393,21 @@ static int pmic_init_max77686(void)
 #ifdef CONFIG_LCD
 int mipi_power(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	struct pmic *p = pmic_get("MAX77686_PMIC");
 
 	/* LDO8 VMIPI_1.0V_AP */
 	max77686_set_ldo_mode(p, 8, OPMODE_ON);
 	/* LDO10 VMIPI_1.8V_AP */
 	max77686_set_ldo_mode(p, 10, OPMODE_ON);
+#endif
 
 	return 0;
 }
 
 void exynos_lcd_power_on(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	struct pmic *p = pmic_get("MAX77686_PMIC");
 
 	/* LCD_2.2V_EN: GPC0[1] */
@@ -410,6 +419,7 @@ void exynos_lcd_power_on(void)
 	pmic_probe(p);
 	max77686_set_ldo_voltage(p, 25, 3100000);
 	max77686_set_ldo_mode(p, 25, OPMODE_LPM);
+#endif
 }
 
 void exynos_reset_lcd(void)
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index 81e35b6..c3946ee 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -38,10 +38,9 @@ static int get_hwrev(void)
 	return board_rev & 0xFF;
 }
 
-static void init_pmic_lcd(void);
-
 int exynos_power_init(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int ret;
 
 	/*
@@ -53,7 +52,7 @@ int exynos_power_init(void)
 		return ret;
 
 	init_pmic_lcd();
-
+#endif
 	return 0;
 }
 
@@ -84,6 +83,7 @@ static unsigned short get_adc_value(int channel)
 
 static int adc_power_control(int on)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int ret;
 	struct pmic *p = pmic_get("MAX8998_PMIC");
 	if (!p)
@@ -97,6 +97,9 @@ static int adc_power_control(int on)
 			      MAX8998_LDO4, !!on);
 
 	return ret;
+#else
+	return 0;
+#endif
 }
 
 static unsigned int get_hw_revision(void)
@@ -144,6 +147,7 @@ static void check_hw_revision(void)
 #ifdef CONFIG_USB_GADGET
 static int s5pc210_phy_control(int on)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	int ret = 0;
 	struct pmic *p = pmic_get("MAX8998_PMIC");
 	if (!p)
@@ -175,7 +179,7 @@ static int s5pc210_phy_control(int on)
 		puts("MAX8998 LDO setting error!\n");
 		return -1;
 	}
-
+#endif
 	return 0;
 }
 
@@ -201,6 +205,7 @@ int exynos_early_init_f(void)
 	return 0;
 }
 
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 static void init_pmic_lcd(void)
 {
 	unsigned char val;
@@ -248,6 +253,7 @@ static void init_pmic_lcd(void)
 	if (ret)
 		puts("LCD pmic initialisation error!\n");
 }
+#endif
 
 void exynos_cfg_lcd_gpio(void)
 {
@@ -304,6 +310,7 @@ void exynos_reset_lcd(void)
 
 void exynos_lcd_power_on(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	struct pmic *p = pmic_get("MAX8998_PMIC");
 
 	if (!p)
@@ -314,6 +321,7 @@ void exynos_lcd_power_on(void)
 
 	pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON);
 	pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON);
+#endif
 }
 
 void exynos_cfg_ldo(void)
@@ -328,8 +336,9 @@ void exynos_enable_ldo(unsigned int onoff)
 
 int exynos_init(void)
 {
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	char buf[16];
-
+#endif
 	gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
 
 	switch (get_hwrev()) {
@@ -354,13 +363,14 @@ int exynos_init(void)
 		break;
 	}
 
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
 	/* Request soft I2C gpios */
 	strcpy(buf, "soft_i2c_scl");
 	gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, buf);
 
 	strcpy(buf, "soft_i2c_sda");
 	gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, buf);
-
+#endif
 	check_hw_revision();
 	printf("HW Revision:\t0x%x\n", board_rev);
 
diff --git a/configs/origen_defconfig b/configs/origen_defconfig
index 0d91ec1..7b9826a 100644
--- a/configs/origen_defconfig
+++ b/configs/origen_defconfig
@@ -37,3 +37,4 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_G_DNL_MANUFACTURER="Samsung"
 CONFIG_G_DNL_VENDOR_NUM=0x04e8
 CONFIG_G_DNL_PRODUCT_NUM=0x6601
+CONFIG_DM_I2C=y
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 0210c5b..1bfefe9 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -153,25 +153,6 @@
 #define CONFIG_SAMSUNG_ONENAND
 #define CONFIG_SYS_ONENAND_BASE		0x0C000000
 
-#include <asm/arch/gpio.h>
-/*
- * I2C Settings
- */
-#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
-#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS	7
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX8998
-
 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 
 /*
diff --git a/include/configs/trats.h b/include/configs/trats.h
index a26d663..a771ddb 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -178,36 +178,6 @@
 /* GPT */
 #define CONFIG_RANDOM_UUID
 
-/* I2C */
-#include <asm/arch/gpio.h>
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE	0xFE
-#define CONFIG_MAX_I2C_NUM		8
-#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_SYS_I2C_INIT_BOARD
-
-/* I2C FG */
-#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_Y41
-#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_Y40
-
-/* POWER */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX8997
-
-#define CONFIG_POWER_FG
-#define CONFIG_POWER_FG_MAX17042
-#define CONFIG_POWER_MUIC
-#define CONFIG_POWER_MUIC_MAX8997
-#define CONFIG_POWER_BATTERY
-#define CONFIG_POWER_BATTERY_TRATS
-
 /* Security subsystem - enable hw_rand() */
 #define CONFIG_EXYNOS_ACE_SHA
 #define CONFIG_LIB_HW_RAND
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 1633c67..1cd3e14 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -155,39 +155,6 @@
 /* GPT */
 #define CONFIG_RANDOM_UUID
 
-/* I2C */
-#include <asm/arch/gpio.h>
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
-#define CONFIG_MAX_I2C_NUM		8
-#define CONFIG_SYS_I2C_SOFT
-#define CONFIG_SYS_I2C_SOFT_SPEED	50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0x00
-#define I2C_SOFT_DECLARATIONS2
-#define CONFIG_SYS_I2C_SOFT_SPEED_2     50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE_2     0x00
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_SYS_I2C_INIT_BOARD
-
-#ifndef __ASSEMBLY__
-int get_soft_i2c_scl_pin(void);
-int get_soft_i2c_sda_pin(void);
-#endif
-#define CONFIG_SOFT_I2C_GPIO_SCL	get_soft_i2c_scl_pin()
-#define CONFIG_SOFT_I2C_GPIO_SDA	get_soft_i2c_sda_pin()
-
-/* POWER */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX77686
-#define CONFIG_POWER_PMIC_MAX77693
-#define CONFIG_POWER_MUIC_MAX77693
-#define CONFIG_POWER_FG_MAX77693
-#define CONFIG_POWER_BATTERY_TRATS2
-
 /* Security subsystem - enable hw_rand() */
 #define CONFIG_EXYNOS_ACE_SHA
 #define CONFIG_LIB_HW_RAND