diff options
| author | Aneesh V <aneesh@ti.com> | 2011-07-21 13:29:26 (GMT) |
|---|---|---|
| committer | U-Boot <uboot@aari01-12.(none)> | 2011-08-03 10:49:20 (GMT) |
| commit | 924eb369e341fbde52c4fa16a1b5e8208fec94bf (patch) | |
| tree | 563f32fc0b289f34682e63c8f4d1871117c3a6ea /arch/arm/cpu/armv7/omap4 | |
| parent | 5ab12a9eeb7c8c1ca331685d1babca6081c7718f (diff) | |
| download | u-boot-fsl-qoriq-924eb369e341fbde52c4fa16a1b5e8208fec94bf.tar.xz | |
omap4: sdram init changes for omap4460
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Diffstat (limited to 'arch/arm/cpu/armv7/omap4')
| -rw-r--r-- | arch/arm/cpu/armv7/omap4/emif.c | 39 |
1 files changed, 22 insertions, 17 deletions
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c index 1234a7e..487ec42 100644 --- a/arch/arm/cpu/armv7/omap4/emif.c +++ b/arch/arm/cpu/armv7/omap4/emif.c @@ -151,22 +151,13 @@ static void emif_update_timings(u32 base, const struct emif_regs *regs) writel(regs->zq_config, &emif->emif_zq_config); writel(regs->temp_alert_config, &emif->emif_temp_alert_config); writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - /* - * Workaround: - * In a specific situation, the OCP interface between the DMM and - * EMIF may hang. - * 1. A TILER port is used to perform 2D burst writes of - * width 1 and height 8 - * 2. ELLAn port is used to perform reads - * 3. All accesses are routed to the same EMIF controller - * - * Work around to avoid this issue REG_SYS_THRESH_MAX value should - * be kept higher than default 0x7. As per recommondation 0x0A will - * be used for better performance with REG_LL_THRESH_MAX = 0x00 - */ - if (omap_revision() == OMAP4430_ES1_0) { - writel(EMIF_L3_CONFIG_VAL_SYS_THRESH_0A_LL_THRESH_00, - &emif->emif_l3_config); + + if (omap_revision() >= OMAP4460_ES1_0) { + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0, + &emif->emif_l3_config); + } else { + writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0, + &emif->emif_l3_config); } } @@ -504,7 +495,7 @@ static u32 get_read_idle_ctrl_reg(u8 volt_ramp) { u32 idle = 0, val = 0; if (volt_ramp) - val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 + 1; + val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1; else /*Maximum value in normal conditions - suggested by hw team */ val = 0x1FF; @@ -1237,6 +1228,20 @@ static void dmm_init(u32 base) &hw_lisa_map_regs->dmm_lisa_map_1); writel(lisa_map_regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); + + if (omap_revision() >= OMAP4460_ES1_0) { + hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE; + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); + } } /* |