kconfig: remove unneeded dependency on !SPL_BUILD

Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

5 files changed, 24 insertions, 25 deletions

diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig
index 162f973..73cc72b 100644
--- a/arch/arm/cpu/arm1176/bcm2835/Kconfig
+++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig
@@ -1,12 +1,12 @@
 if TARGET_RPI || TARGET_RPI_2
 
 config DM
-	default y if !SPL_BUILD
+	default y
 
 config DM_SERIAL
-	default y if !SPL_BUILD
+	default y
 
 config DM_GPIO
-	default y if !SPL_BUILD
+	default y
 
 endif
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
index 2064efa..eb86a7f 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -6,7 +6,7 @@ choice
 config TARGET_SMDKV310
 	select SUPPORT_SPL
 	bool "Exynos4210 SMDKV310 board"
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 config TARGET_TRATS
 	bool "Exynos4210 Trats board"
@@ -33,32 +33,32 @@ config TARGET_ARNDALE
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select SUPPORT_SPL
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 config TARGET_SMDK5250
 	bool "SMDK5250 board"
 	select SUPPORT_SPL
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 config TARGET_SNOW
 	bool "Snow board"
 	select SUPPORT_SPL
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 config TARGET_SMDK5420
 	bool "SMDK5420 board"
 	select SUPPORT_SPL
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 config TARGET_PEACH_PI
 	bool "Peach Pi board"
 	select SUPPORT_SPL
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 config TARGET_PEACH_PIT
 	bool "Peach Pit board"
 	select SUPPORT_SPL
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 endchoice
 
@@ -66,25 +66,25 @@ config SYS_SOC
 	default "exynos"
 
 config DM
-	default y if !SPL_BUILD
+	default y
 
 config DM_SERIAL
-	default y if !SPL_BUILD
+	default y
 
 config DM_SPI
-	default y if !SPL_BUILD
+	default y
 
 config DM_SPI_FLASH
-	default y if !SPL_BUILD
+	default y
 
 config DM_GPIO
-	default y if !SPL_BUILD
+	default y
 
 config SYS_MALLOC_F
-	default y if !SPL_BUILD
+	default y
 
 config SYS_MALLOC_F_LEN
-	default 0x400 if !SPL_BUILD
+	default 0x400
 
 source "board/samsung/smdkv310/Kconfig"
 source "board/samsung/trats/Kconfig"
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index 4644098..4a0ac2c 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -94,19 +94,19 @@ config TARGET_TWISTER
 endchoice
 
 config DM
-	default y if !SPL_BUILD
+	default y
 
 config DM_GPIO
-	default y if DM && !SPL_BUILD
+	default y if DM
 
 config DM_SERIAL
-	default y if DM && !SPL_BUILD
+	default y if DM
 
 config SYS_MALLOC_F
-	default y if DM && !SPL_BUILD
+	default y if DM
 
 config SYS_MALLOC_F_LEN
-	default 0x400 if DM && !SPL_BUILD
+	default 0x400 if DM
 
 config SYS_SOC
 	default "omap3"
diff --git a/arch/arm/cpu/armv7/s5pc1xx/Kconfig b/arch/arm/cpu/armv7/s5pc1xx/Kconfig
index 6288134..bc73813 100644
--- a/arch/arm/cpu/armv7/s5pc1xx/Kconfig
+++ b/arch/arm/cpu/armv7/s5pc1xx/Kconfig
@@ -5,11 +5,11 @@ choice
 
 config TARGET_S5P_GONI
 	bool "S5P Goni board"
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 config TARGET_SMDKC100
 	bool "Support smdkc100 board"
-	select OF_CONTROL if !SPL_BUILD
+	select OF_CONTROL
 
 endchoice
 
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig
index 9bbc011..8335685 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -64,7 +64,6 @@ config CMD_PINMON
 
 config CMD_DDRPHY_DUMP
 	bool "Enable dump command of DDR PHY parameters"
-	depends on !SPL_BUILD
 	help
 	  The command "ddrphy" shows the resulting parameters of DDR PHY
 	  training; it is useful for the evaluation of DDR PHY training.