armv8: fsl-lsch3: rename ls2080a_stream_id.h to stream_id_lsch3.h

The stream ID allocation for Chasis 3.0 devices can be shared among
LS1088, LS2088 and LS2080.

Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

1 files changed, 0 insertions, 77 deletions

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h b/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h
deleted file mode 100644
index ee28323..0000000
--- a/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- */
-#ifndef __FSL_STREAM_ID_H
-#define __FSL_STREAM_ID_H
-
-/*
- * Stream IDs on ls2080a devices are not hardwired and are
- * programmed by sw.  There are a limited number of stream IDs
- * available, and the partitioning of them is scenario dependent.
- * This header defines the partitioning between legacy, PCI,
- * and DPAA2 devices.
- *
- * This partitioning can be customized in this file depending
- * on the specific hardware config:
- *
- *  -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
- *     -all legacy devices get a unique stream ID assigned and programmed in
- *      their AMQR registers by u-boot
- *
- *  -PCIe
- *     -there is a range of stream IDs set aside for PCI in this
- *      file.  U-boot will scan the PCI bus and for each device discovered:
- *         -allocate a streamID
- *         -set a PEXn LUT table entry mapping 'requester ID' to 'stream ID'
- *         -set a msi-map entry in the PEXn controller node in the
- *          device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt
- *          for more info on the msi-map definition)
- *
- *  -DPAA2
- *     -u-boot will allocate a range of stream IDs to be used by the Management
- *      Complex for containers and will set these values in the MC DPC image.
- *     -the MC is responsible for allocating and setting up 'isolation context
- *      IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
- *
- * On ls2080a SoCs stream IDs are programmed in AMQ registers (32-bits) for
- * each of the different bus masters.  The relationship between
- * the AMQ registers and stream IDs is defined in the table below:
- *          AMQ bit    streamID bit
- *      ---------------------------
- *           PL[18]         9        // privilege bit
- *          BMT[17]         8        // bypass translation
- *           VA[16]         7        // reserved
- *             [15]         -        // unused
- *         ICID[14:7]       -        // unused
- *         ICID[6:0]        6-0      // isolation context id
- *     ----------------------------
- *
- */
-
-#define AMQ_PL_MASK			(0x1 << 18)   /* priviledge bit */
-#define AMQ_BMT_MASK			(0x1 << 17)   /* bypass bit */
-
-#define FSL_INVALID_STREAM_ID		0
-
-#define FSL_BYPASS_AMQ			(AMQ_PL_MASK | AMQ_BMT_MASK)
-
-/* legacy devices */
-#define FSL_USB1_STREAM_ID		1
-#define FSL_USB2_STREAM_ID		2
-#define FSL_SDMMC_STREAM_ID		3
-#define FSL_SATA1_STREAM_ID		4
-#define FSL_SATA2_STREAM_ID		5
-#define FSL_DMA_STREAM_ID		6
-
-/* PCI - programmed in PEXn_LUT */
-#define FSL_PEX_STREAM_ID_START		7
-#define FSL_PEX_STREAM_ID_END		22
-
-/* DPAA2 - set in MC DPC and alloced by MC */
-#define FSL_DPAA2_STREAM_ID_START	23
-#define FSL_DPAA2_STREAM_ID_END		63
-
-#endif