diff options
| author | Keerthy <j-keerthy@ti.com> | 2016-11-23 07:55:27 (GMT) |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-12-04 18:54:50 (GMT) |
| commit | f56e63509985d23e8912beaf3c38b07f7a1b12c6 (patch) | |
| tree | d0b54ddf7c11a84acedd23b44a044294bccd7119 /arch/arm/mach-omap2/omap5/hw_data.c | |
| parent | 4596cf98cde13d09310eb0cb2a4c1e11c9f2279a (diff) | |
| download | u-boot-fsl-qoriq-f56e63509985d23e8912beaf3c38b07f7a1b12c6.tar.xz | |
board: ti: dra71x-evm: Add PMIC support
Add the pmic_data for LP873x PMIC which is used to power
up dra71x-evm.
Note: As per the DM[1] DRA71x supports only OP_NOM. So, updating
the efuse registers only to use OPP_NOM irrespective of any
CONFIG_DRA7_<VOLT>_OPP_{NOM,od,high} is defined.
[1] http://www.ti.com/product/DRA718/technicaldocuments
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'arch/arm/mach-omap2/omap5/hw_data.c')
| -rw-r--r-- | arch/arm/mach-omap2/omap5/hw_data.c | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c index c85c71a..58991d7 100644 --- a/arch/arm/mach-omap2/omap5/hw_data.c +++ b/arch/arm/mach-omap2/omap5/hw_data.c @@ -336,6 +336,22 @@ struct pmic_data tps659038 = { .gpio_en = 0, }; +/* The LP8732 and LP8733 are software-compatible, use common struct */ +struct pmic_data lp8733 = { + .base_offset = LP873X_BUCK_BASE_VOLT_UV, + .step = 5000, /* 5 mV represented in uV */ + /* + * Offset codes 0 - 0x13 Invalid. + * Offset codes 0x14 0x17 give 10mV steps + * Offset codes 0x17 through 0x9D give 5mV steps + * So let us start with our operating range from .73V + */ + .start_code = 0x17, + .i2c_slave_addr = 0x60, + .pmic_bus_init = gpi2c_init, + .pmic_write = palmas_i2c_write_u8, +}; + struct vcores_data omap5430_volts = { .mpu.value[OPP_NOM] = VDD_MPU, .mpu.addr = SMPS_REG_ADDR_12_MPU, |