x86: Refactor PIRQ routing support

PIRQ routing is pretty much common in Intel chipset. It has several
PIRQ links (normally 8) and corresponding registers (either in PCI
configuration space or memory-mapped IBASE) to configure the legacy
8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing
support using device tree and move it to a common place, so that we
can easily add PIRQ routing support on a new platform.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

2 files changed, 76 insertions, 55 deletions

diff --git a/arch/x86/include/asm/arch-queensbay/irq.h b/arch/x86/include/asm/arch-queensbay/irq.h
deleted file mode 100644
index e7f8616..0000000
--- a/arch/x86/include/asm/arch-queensbay/irq.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ARCH_IRQ_H_
-#define _ARCH_IRQ_H_
-
-enum pci_int_pin {
-	INTX,
-	INTA,
-	INTB,
-	INTC,
-	INTD
-};
-
-enum pirq_pin {
-	PIRQA,
-	PIRQB,
-	PIRQC,
-	PIRQD,
-	PIRQE,
-	PIRQF,
-	PIRQG,
-	PIRQH
-};
-
-/* PIRQ link number and value conversion */
-#define LINK_V2N(link)	(link - 0x60)
-#define LINK_N2V(link)	(link + 0x60)
-
-#define PIRQ_BITMAP	0xdee0
-
-struct irq_info;
-
-/**
- * board_fill_irq_info() - Board-specific irq_info fill routine
- *
- * This fills the irq_info table for any board-specific add-in cards.
- *
- * @slot:	pointer to the struct irq_info that is to be filled in
- * @return:	number of entries were written to the struct irq_info
- */
-int board_fill_irq_info(struct irq_info *slot);
-
-/**
- * pirq_init() - Initialize platform PIRQ routing
- *
- * This initializes the PIRQ routing on the platform and configures all PCI
- * devices' interrupt line register to a working IRQ number on the 8259 PIC.
- */
-void pirq_init(void);
-
-#endif /* _ARCH_IRQ_H_ */
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
new file mode 100644
index 0000000..4de5512
--- /dev/null
+++ b/arch/x86/include/asm/irq.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ARCH_IRQ_H_
+#define _ARCH_IRQ_H_
+
+#include <dt-bindings/interrupt-router/intel-irq.h>
+
+/**
+ * Intel interrupt router configuration mechanism
+ *
+ * There are two known ways of Intel interrupt router configuration mechanism
+ * so far. On most cases, the IRQ routing configuraiton is controlled by PCI
+ * configuraiton registers on the legacy bridge, normally PCI BDF(0, 31, 0).
+ * On some newer platforms like BayTrail and Braswell, the IRQ routing is now
+ * in the IBASE register block where IBASE is memory-mapped.
+ */
+enum pirq_config {
+	PIRQ_VIA_PCI,
+	PIRQ_VIA_IBASE
+};
+
+/**
+ * Intel interrupt router control block
+ *
+ * Its members' value will be filled in based on device tree's input.
+ *
+ * @config:	PIRQ_VIA_PCI or PIRQ_VIA_IBASE
+ * @link_base:	link value base number
+ * @irq_mask:	IRQ mask reprenting the 16 IRQs in 8259, bit N is 1 means
+ *		IRQ N is available to be routed
+ * @lb_bdf:	irq router's PCI bus/device/function number encoding
+ * @ibase:	IBASE register block base address
+ */
+struct irq_router {
+	int config;
+	u32 link_base;
+	u16 irq_mask;
+	u32 bdf;
+	u32 ibase;
+};
+
+struct pirq_routing {
+	int bdf;
+	int pin;
+	int pirq;
+};
+
+/* PIRQ link number and value conversion */
+#define LINK_V2N(link, base)	(link - base)
+#define LINK_N2V(link, base)	(link + base)
+
+#define PIRQ_BITMAP		0xdef8
+
+/**
+ * cpu_irq_init() - Initialize CPU IRQ routing
+ *
+ * This initializes some platform-specific registers related to IRQ routing,
+ * like configuring internal PCI devices to use which PCI interrupt pin,
+ * and which PCI interrupt pin is mapped to which PIRQ line. Note on some
+ * platforms, such IRQ routing might be hard-coded thus cannot configure.
+ */
+void cpu_irq_init(void);
+
+/**
+ * pirq_init() - Initialize platform PIRQ routing
+ *
+ * This initializes the PIRQ routing on the platform and configures all PCI
+ * devices' interrupt line register to a working IRQ number on the 8259 PIC.
+ */
+void pirq_init(void);
+
+#endif /* _ARCH_IRQ_H_ */